Age | Commit message (Collapse) | Author | Files | Lines |
|
GC version is 11.0.1 rather than 11.0.2
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DCN 3.1.4 version and family ids
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Integrate OVT timing from DM to DC logic to update info frame
and mode management to report the resolution to the OS.
[How]
Reflect RID and Frame Rate to AVI InfoFrame Version 5.
Define new Timing Standard for OVT timing.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
This is one of the major steps to decouple hw lane settings
from dpcd lane settings.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
According to DP specs, in EQ DONE phase of link training, we
should lower lane count when at least one CR DONE bit is set to 1, while
lower link rate when all CR DONE bits are 0s. However in our code, we will
treat both cases as latter. This is not exactly correct based on the specs
expectation.
[how]
Check lane0 CR DONE bit when it is still set but CR DONE fails,
we treat it as a partial CR DONE failure in EQ DONE phase, we
will follow the same fallback flow as when ED DONE fails in EQ
DONE phase.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
Expose vendor specific DPCD registers for rate controlling the eDP sink
TCON's refresh rate during PSR active. When used in combination with
PSR-SU and Freesync, it is called PSR-SU Rate Contorol, or PSR-SU-RC for
short.
v2: Add all DPCD registers required
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Add USBC connector ID to align with new VBIOS parsing.
Add seperate DCN321 link encoder due to different PHY version affecting
DP ALT related registers.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
This patch adds necessary changes needed in DC files outside DCN32/321
specific tree
v2: squash in updates (Alex)
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add DCN3.2 asic identifiers.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
ref_dtbclk value is assigned in clk_mgr_construct,
but the clks struct is cleared in init_clocks.
Make sure to restore the value or we will get
0 value for ref_dtbclk in DCN31.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 3b90318d44f87a3582f876802253a7748d270385.
[WHY]
Regressions unintentionally caused by change,
reverting until this can be resolved.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.19-2022-05-18:
amdgpu:
- Misc code cleanups
- Additional SMU 13.x enablement
- Smartshift fixes
- GFX11 fixes
- Support for SMU 13.0.4
- SMU mutex fix
- Suspend/resume fix
amdkfd:
- static checker fix
- Doorbell/MMIO resource handling fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518205621.5741-1-alexander.deucher@amd.com
|
|
[WHY]
Split LTTPR mode selection between platform support and downstream link support
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.19-2022-04-29:
amdgpu
- RAS updates
- SI dpm deadlock fix
- Misc code cleanups
- HDCP fixes
- PSR fixes
- DSC fixes
- SDMA doorbell cleanups
- S0ix fix
- DC FP fix
- Zen dom0 regression fix for APUs
- IP discovery updates
- Initial SoC21 support
- Support for new vbios tables
- Runtime PM fixes
- Add PSP TA debugfs interface
amdkfd:
- Misc code cleanups
- Ignore bogus MEC signals more efficiently
- SVM fixes
- Use bitmap helpers
radeon:
- Misc code cleanups
- Spelling/grammer fixes
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429144853.5742-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.19:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Introduction of display-helper module, and rework of the DP, DSC,
HDCP, HDMI and SCDC headers
- doc: Improvements for tiny drivers, link to external resources
- formats: helper to convert from RGB888 and RGB565 to XRGB8888
- modes: make width-mm/height-mm check mandatory in of_get_drm_panel_display_mode
- ttm: Convert from kvmalloc_array to kvcalloc
Driver Changes:
- bridge:
- analogix_dp: Fix error handling in probe
- dw_hdmi: Coccinelle fixes
- it6505: Fix Kconfig dependency on DRM_DP_AUX_BUS
- panel:
- new panel: DataImage FG040346DSSWBG04
- amdgpu: ttm_eu cleanups
- mxsfb: Rework CRTC mode setting
- nouveau: Make some variables static
- sun4i: Drop drm_display_info.is_hdmi caching, support for the
Allwinner D1
- vc4: Drop drm_display_info.is_hdmi caching
- vmwgfx: Fence improvements
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 28 Apr 2022 17:52:13 AEST
# gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5
# gpg: Can't check signature: No public key
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220428075237.yypztjha7hetphcd@houat
|
|
[why & how]
For some specific eDP panel, we'd check the PSR-SU cap during boot
by reading the vendor specific DPCD, otherwise it will cause to
false report the eDP panel which supports PSR-SU as an non-PSR-SU
panel.
- add the vendor specific DPCD address in ddc_service_types header
- if specific eDP panel detected, check vendor specific DPCD for
PSR-SU cap
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
v2:
* update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
|
|
[Why]
Add support for CONNECTOR_ID_USBC
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Need to provide this workaround
only for type 1 passive dongle
[how]
Detect if dongle is type 1 or 2.
And use it to determine if w/a is needed.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
why and how:
need to hook in new smu interfaces
cleaning up code that used old variables
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leung, Martin <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
To move the PSR DPCD caps detection into detect_edp_sink_caps()
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Po Ting Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- set DC version
- add construct/destroy dc clock management function
- register dcn interrupt handler
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.18-2022-02-11-1:
amdgpu:
- Clean up of power management code
- Enable freesync video mode by default
- Clean up of RAS code
- Improve VRAM access for debug using SDMA
- Coding style cleanups
- SR-IOV fixes
- More display FP reorg
- TLB flush fixes for Arcuturus, Vega20
- Misc display fixes
- Rework special register access methods for SR-IOV
- DP2 fixes
- DP tunneling fixes
- DSC fixes
- More IP discovery cleanups
- Misc RAS fixes
- Enable both SMU i2c buses where applicable
- s2idle improvements
- DPCS header cleanup
- Add new CAP firmware support for SR-IOV
amdkfd:
- Misc cleanups
- SVM fixes
- CRIU support
- Clean up MQD manager
UAPI:
- Add interface to amdgpu CTX ioctl to request a stable power state for profiling
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207
- Add amdkfd support for CRIU
https://github.com/checkpoint-restore/criu/pull/1709
- Remove old unused amdkfd debugger interface
Was only implemented for Kaveri and was only ever used by an old HSA tool that was never open sourced
radeon:
- Fix error handling in radeon_driver_open_kms
- UVD suspend fix
- Misc fixes
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211220706.5803-1-alexander.deucher@amd.com
|
|
Signed-off-by: Oliver Logush <ollogush@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DSC sequence for non virtual dpcd synaptics hub
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
DCN guard is not necessary for DP2.x relevant logic.
Drop them.
v2: squash in fix for misplaced #endif (Alex)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
According to the USB4 specification, FEC and DSC should be disabled
when a USB4 DPIA operates in TBT3 compatibility mode.
[How]
Upon detecting that a USB4 DPIA is connected to a device that is known
to operate in TBT3 mode, disable FEC and DSC support if they have been
reported by the TBT3 device.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move all public DisplayPort headers into dp/ and update users. No
functional changes.
v3:
* rebased onto latest drm-tip
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-5-tzimmermann@suse.de
|
|
[why]
- Adding a DM interface to enable DSC over eDP on Linux
- DSC over eDP will allow to power savings by reducing
the bandwidth required to support panel's modes
- Apply link optimization algorithm to reduce link bandwidth
when DSC is enabled
[how]
- Read eDP panel's DSC capabilities
- Apply DSC policy on eDP panel based on its DSC capabilities
- Enable DSC encoder's on the pipe
- Enable DSC on panel's side by setting DSC_ENABLE DPCD register
- Adding link optimization algorithm to reduce link rate or lane
count based
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
It doesn't make sense to guard DC_LOG_DP2 by CONFIG_DRM_AMD_DCN, and
this also caused build failure for allmodconfig; So drop the guard
to fix the compile failure;
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some panels require to use TPS3 pattern to wake up link in PSR mode.
[How]
To add TPS3 selection information in PSR settings command and pass to
DMUB FW.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull drm updates from Dave Airlie:
"Summary below. i915 starts to add support for DG2 GPUs, enables DG1
and ADL-S support by default, lots of work to enable DisplayPort 2.0
across drivers. Lots of documentation updates and fixes across the
board.
core:
- improve dma_fence, lease and resv documentation
- shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
- sched fixes/improvements
- allow empty drm leases
- add dma resv iterator
- add more DP 2.0 headers
- DP MST helper improvements for DP2.0
dma-buf:
- avoid warnings, remove fence trace macros
bridge:
- new helper to get rid of panels
- probe improvements for it66121
- enable DSI EOTP for anx7625
fbdev:
- efifb: release runtime PM on destroy
ttm:
- kerneldoc switch
- helper to clear all DMA mappings
- pool shrinker optimizaton
- remove ttm_tt_destroy_common
- update ttm_move_memcpy for async use
panel:
- add new panel-edp driver
amdgpu:
- Initial DP 2.0 support
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
- Modifier support for DCC image stores for GFX 10.3
- Display rework for better FP code handling
- Yellow Carp/Cyan Skillfish updates
- Cyan Skillfish display support
- convert vega/navi to IP discovery asic enumeration
- validate IP discovery table
- RAS improvements
- Lots of fixes
i915:
- DG1 PCI IDs + LMEM discovery/placement
- DG1 GuC submission by default
- ADL-S PCI IDs updated + enabled by default
- ADL-P (XE_LPD) fixed and updates
- DG2 display fixes
- PXP protected object support for Gen12 integrated
- expose multi-LRC submission interface for GuC
- export logical engine instance to user
- Disable engine bonding on Gen12+
- PSR cleanup
- PSR2 selective fetch by default
- DP 2.0 prep work
- VESA vendor block + MSO use of it
- FBC refactor
- try again to fix fast-narrow vs slow-wide eDP training
- use THP when IOMMU enabled
- LMEM backup/restore for suspend/resume
- locking simplification
- GuC major reworking
- async flip VT-D workaround changes
- DP link training improvements
- misc display refactorings
bochs:
- new PCI ID
rcar-du:
- Non-contiguious buffer import support for rcar-du
- r8a779a0 support prep
omapdrm:
- COMPILE_TEST fixes
sti:
- COMPILE_TEST fixes
msm:
- fence ordering improvements
- eDP support in DP sub-driver
- dpu irq handling cleanup
- CRC support for making igt happy
- NO_CONNECTOR bridge support
- dsi: 14nm phy support for msm8953
- mdp5: msm8x53, sdm450, sdm632 support
stm:
- layer alpha + zpo support
v3d:
- fix Vulkan CTS failure
- support multiple sync objects
gud:
- add R8/RGB332/RGB888 pixel formats
vc4:
- convert to new bridge helpers
vgem:
- use shmem helpers
virtio:
- support mapping exported vram
zte:
- remove obsolete driver
rockchip:
- use bridge attach no connector for LVDS/RGB"
* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
drm/amd/display: MST support for DPIA
drm/amdgpu: Fix even more out of bound writes from debugfs
drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
drm/amdgpu/UAPI: rearrange header to better align related items
drm/amd/display: Enable dpia in dmub only for DCN31 B0
drm/amd/display: Fix USB4 hot plug crash issue
drm/amd/display: Fix deadlock when falling back to v2 from v3
drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
drm/amd/display: move FPU associated DCN301 code to DML folder
drm/amd/display: fix link training regression for 1 or 2 lane
drm/amd/display: add two lane settings training options
drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
drm/amd/display: implement decide lane settings
drm/amd/display: adopt DP2.0 LT SCR revision 8
drm/amd/display: FEC configuration for dpia links in MST mode
drm/amd/display: FEC configuration for dpia links
drm/amd/display: Add workaround flag for EDID read on certain docks
drm/amd/display: Set phy_mux_sel bit in dmub scratch register
...
|
|
[why]
option 1: disallow different lanes to have different lane settings
option 2: dpcd lane settings will always use the same hw lane settings
even if it doesn't match requested lane adjust
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
As DP features expands, we have encountered many situations where we
must configure a different DPCD lane setting from hw lane settings we
output. The change is to decouple hw lane settings from dpcd lane
settings to provide flexibility to configure dpcd and hw individually.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Decouple lane settings decision logic all to its own function. The
function takes in lane adjust array and link training settings and
decide what hw lane setting and dpcd lane setting should be used.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When writing long AUX commands some sinks will respond will write status
update requiring source to read status.
[How]
When a write request is replied with data (AUX_ACK_M), retry a read of
write status to determine when the write is completed.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently there are use cases that require DP link to maintain fixed VS
and PE in HW regardless of what the sink requests. BIOS integrated info
table will specify whether we need to use the fixed drive settings, and
the drive settings to use.
[How]
Implement changes to parse the integrated info table and set the fixed
drive settings accordingly.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.
v2: squash in fix for display code (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
B0 internal rev_id is 0x01, B1 internal rev_id is 0x02.
The external rev_id for B0 and B1 is 0x20.
The original expression is not suitable for B1.
v2: squash in fix for display code (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
YELLOW_CARP_B0 address was not correct
[How]
Set YELLOW_CARP_B0 to 0x1A.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
YELLOW_CARP_B0 address was not correct
[How]
Set YELLOW_CARP_B0 to 0x1A.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
add display related cyan_skillfish files in.
makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag.
v2: squash in clang fixes from Harry, Nathan
v3: squash in missing CONFIG_DRM_AMD_DC check (Alex)
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Jun Lei <jun.lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Need a check for NULL pointer access for ddc pin and aux engine.
[How]
Adding a check for ddc pin and aux engine accesses.
Reviewed-by: Jimmy Kizito <jimmy.kizito@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit "Revert "Add DPCD writes at key points" ".
The following patch will fix the system hang issue.
v2: squash in indentation warning fix
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Retrieve 128/132b link cap.
2. 128/132b link training and payload allocation.
3. UHBR10 link rate support.
[squash in warning fixes - Alex]
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Parse DP2 encoder caps and hpo instance from bios
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|