aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dmub/inc
AgeCommit message (Collapse)AuthorFilesLines
2023-11-07drm/amd/display: [FW Promotion] Release 0.0.190.0Anthony Koo1-2/+2
- Increase number of bits for IPS boot option Reviewed-by: Aric Cyr <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Enable more IPS optionsSung Joon Kim1-3/+6
[why] To help isolate static screen and video playback tests, we want to enable an IPS option to allow IPS only on D3 cycle. [how] Add DISABLE_DYNAMIC and DISABLE_ALL IPS disable flags for user control. Reviewed-by: Jun Lei <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Sung Joon Kim <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: [FW Promotion] Release 0.0.189.0Anthony Koo1-7/+5
- Minor formatting changes - Update defines to match the bit width of the field it is used for - Add new boot up bits to control HW sub block regions power down Reviewed-by: Aric Cyr <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-10-09drm/amd/display: Refactor HWSS into component folderMounika Adhuri1-1/+2
[why] Rename hw_sequencer to hwseq. Move all hwseq files to unique folder hwss. [how] creating hwss repo in dc, and moved the dcnxx_hwseq.c and .h files into corresponding new folders inside the hwss and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Mounika Adhuri <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-10-04drm/amd/display: Adjust code style for dmub_cmd.hAurabindo Pillai1-81/+81
[Why&How] Make some formatting changes and rearranging of definitions for consistency. Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-10-04drm/amd/display: Update DMUB cmd headerAurabindo Pillai1-3/+28
[Why&How] * Add hints about the bits used in the packed struct. * Update new bitfields for ABM and IPS Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-20drm/amd/display: [FW Promotion] Release 0.0.183.0Anthony Koo1-0/+31
- Add new IPS ALLOW masks - Add new Replay power configuration options Tested-by: Daniel Wheeler <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-11drm/amd/display: support main link off before specific vertical linePaul Hsieh1-2/+2
[Why] Some panels request main link off before specific vertical line. If source turn off main link after specific vertical line then panel defect will be exposed. [How] Add interface to support turn off main link before specific vertical line Reviewed-by: Robin Chen <[email protected]> Acked-by: Stylon Wang <[email protected]> Signed-off-by: Paul Hsieh <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-09-11drm/amd/display: [FW Promotion] Release 0.0.181.0Anthony Koo1-0/+2
- Add new params to dmub_feature_caps for checking replay support in FW Acked-by: Stylon Wang <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: [FW Promotion] Release 0.0.180.0Anthony Koo1-5/+0
- Remove unused flag otg_powered_down Acked-by: Wayne Lin <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-15drm/amd/display: [FW Promotion] Release 0.0.179.0Anthony Koo1-0/+4
- Add defines to specify new PHY power states Acked-by: Stylon Wang <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-07drm/amd/display: Add interface to enable DPIA traceStylon Wang1-0/+18
[Why] DPIA traces from DMUB is not enabled by default, which is less convenient to debug DPIA related issues because we have to resort to other debug tools to enable DPIA trace. [How] Exposes interfaces to update trace mask from the DMUB GPINT commands. Also provides DC implementations to enable DPIA trace. Reviewed-by: Aurabindo Pillai <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Stylon Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-07drm/amd/display: Add structs for Freesync Panel ReplayBhawanpreet Lakha1-0/+412
In some instances, the GPU is transmitting repeated frame to the sink without any updates or changes in the content. These repeat transmission are wasteful, resulting in power draw in different aspects of the system 1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic prevents power down of parts of this HW path. 2. GPU is transmitting pixel data to the display through the main link of the DisplayPort interface. This prevents power down of both the Source transmitter (TX) and the Sink receiver (RX)  The concepts of utilizing replay is similar to PSR, but there is a benefit of: Source and Sink remaining synchronized which allows for - lower latency when switching from replay to live frames - enable the possibility of more use cases - easy control of the sink's refresh rate during replay Due to Source and Sink remaining timing synchronized, Replay can be activated in more UI scenarios. Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Rearrange dmub_cmd defs orderAnthony Koo1-28/+26
- Rearranged defs order Acked-by: Alex Hung <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Correct grammar mistakesReza Amini1-9/+11
[Why] There are grammer mistakes in comments [How] Correct grammar mistakes Reviewed-by: Anthony Koo <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Reza Amini <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-21drm/amd/display: remove an unused fileAurabindo Pillai1-183/+0
[Why&How] Internal subvp state is not referenced in driver code, so it can be removed. Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-18drm/amd/display: ABM pause toggleReza Amini1-0/+131
[why] Allow ABM states to be transferred across display adapters for smooth display transitions. [how] We call DMUB to pause and get ABM states. We transfer data to other gpu, and deliver data and ask ABM to un-pause. Reviewed-by: Harry Vanzylldejong <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Reza Amini <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-09drm/amd/display: [FW Promotion] Release 0.0.165.0Anthony Koo1-1/+9
- Add dmub boot options to disable ips states on init Acked-by: Alan Liu <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-04-24drm/amd/display: Update FW feature caps structAlvin Lee1-1/+2
Reorder FW feature caps struct variable order to ensure backwards compatability is maintained for older FW Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Sung Lee <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-04-24drm/amd/display: [FW Promotion] Release 0.0.163.0Anthony Koo1-1/+2
Add feature caps for Subvp + PSR so driver is back compatible Tested-by: Daniel Wheeler <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-04-21drm/amd/display: Add FAMS related definitions and documenation for enum fieldsAurabindo Pillai1-2/+15
[Why&How] Add Enum and documenation related to FAMS (Firmware Assisted Memclk Switching) and CAB (Cache As Buffer) Reviewed-by: Qingqing Zhuo <[email protected]> Reviewed-by: Leo Li <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-04-18drm/amd/display: [FW Promotion] Release 0.0.162.0Anthony Koo1-3/+6
- Add DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE command - Remove d3 entry event and instead check for stream mask - dmu: Enable timeout recovery and detection for p-state Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-04-18drm/amd/display: Add FAMS validation before trying to use itRodrigo Siqueira1-1/+1
To ensure that FAMS can be used, DC must check if there is VRR support. This commit adds the required configuration to ensure FAMS can be executed in the target system. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-04-11drm/amd/display: [FW Promotion] Release 0.0.161.0Anthony Koo1-2/+26
- Add command to idle opt. - Rename d3 entry event and add idle trigger param on notify event. - Add bit to fw boot status to notify status when hardware is powered up. Reviewed-by: Aric Cyr <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-03-31drm/amd/display: [FW Promotion] Release 0.0.160.0Anthony Koo1-3/+11
- New parameter to define extra vblank stretch required when doing FPO + Vactive - Pass in pipe index for FPO Reviewed-by: Alvin Lee <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-03-15drm/amd/display: [FW Promotion] Release 0.0.158.0Anthony Koo1-2/+2
[Why & How] Add boot control bit to control dispclk and dppclk deep sleep Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-03-08drivers/gpu: fix typo in commentHusain Alshehhi1-9/+9
Replace "isntance" with "instance". Signed-off-by: Husain Alshehhi <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-02-15drm/amd/display: avoid unaligned access warningsJonathan Gray1-0/+2
When building on OpenBSD/arm64 with clang 15, unaligned access warnings are seen when a union is embedded inside a packed struct. drm/amd/display/dmub/inc/dmub_cmd.h:941:18: error: field cursor_copy_src within 'struct dmub_rb_cmd_mall' is less aligned than 'union dmub_addr' and is usually due to 'struct dmub_rb_cmd_mall' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] union dmub_addr cursor_copy_src; /**< Cursor copy address */ ^ drm/amd/display/dmub/inc/dmub_cmd.h:942:18: error: field cursor_copy_dst within 'struct dmub_rb_cmd_mall' is less aligned than 'union dmub_addr' and is usually due to 'struct dmub_rb_cmd_mall' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] union dmub_addr cursor_copy_dst; /**< Cursor copy destination */ ^ Add pragma pack around dmub_addr to avoid this. Signed-off-by: Jonathan Gray <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-02-15drm/amd/display: temporary fix for page faultingAyush Gupta1-1/+1
This reverts a part of the commit 826e7ffaf079c72607bf3199d4e19730eaf8ca00 ("drm/amd/display: [FW Promotion] Release 0.0.153.0") Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Ayush Gupta<[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-02-14drm/amd/display: Move DCN314 DOMAIN power control to DMCUBNicholas Kazlauskas1-0/+25
[Why] DOMAIN power gating control is now required to be done via firmware due to interlock with other power features. This is to avoid intermittent issues in the LB memories. [How] If the firmware supports the command then use the new firmware as the sequence can avoid potential display corruption issues. The command will be ignored on firmware that does not support DOMAIN power control and the pipes will remain always on - frequent PG cycling can cause the issue to occur on the old sequence, so we should avoid it. Reviewed-by: Hansen Dsouza <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-02-08drm/amd/display: [FW Promotion] Release 0.0.153.0Anthony Koo1-1/+1
[Why&How] - Reduce reserved size from 9 to 8 dwords to reduce structure size and allow the union dmub_rb_cmd to fit into max 64-bytes cmd size Reviewed-by: Aric Cyr <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-01-24drm/amd/display: Pass DSC slice height to PSR FWRobin Chen1-0/+8
[Why] When DSC is enabled, the PSRSU seletive update region must be multiple number of DSC slice height number. The original solution is to overwrite the SU Y granularity by DSC slice height in DAL driver. However, the size of the SU Y granularity variable only has 8 bytes and the DSC slice height may over the 8 bytes size. [How] Instead of overwriting the SU Y granularity value, add a new DSC slice height pararmeter and pass it to DMUB PSRSU FW. The PSRSU FW will refer to the DSC slice height value and extend the SU region. Reviewed-by: Dennis Chan <[email protected]> Reviewed-by: ChunTao Tso <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Robin Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-01-24drm/amd/display: [FW Promotion] Release 0.0.150.0Anthony Koo1-1/+1
- Add comments to reserved bit Reviewed-by: Aric Cyr <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-01-17drm/amd/display: Skip backlight control delay on external powered linksTony Tascioglu1-1/+1
[Why] When an eDP panel is powered externally from a different GPU, we can avoid waiting for hardware sequencing delays when switching the backlight on/off as the display backlight is no longer powered by the original source. [How] This commit extends the 'link_powered_externally' variable to allow bypassing hardware delays for additional backlight commands and force the backlight on/off when a link is powered by another GPU. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Felipe Clark <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Tony Tascioglu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-01-17drm/amd/display: Optimize link power-down when link powered externallyTony Tascioglu1-1/+2
[Why] When an eDP panel is powered externally by a different GPU, we don't need to wait for hardware sequencing delays when powering down a link, as the display is not dependent on the GPU being powered down. [How] This commit adds a variable 'link_powered_externally' to indicate when a link is being powered by another GPU. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Felipe Clark <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Tony Tascioglu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-01-13drm/amd/display: Update dmub header to match DMUBMustapha Ghaddar1-81/+84
[WHY] Last PR missed name of a struct to match in DMUB [HOW] Update the logic in dmub_cmh.h header Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Meenakshikumar Somasundaram <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Mustapha Ghaddar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-12-15drm/amd/display: Add DPIA NOTIFICATION logicMustapha Ghaddar1-0/+83
[WHY] Adding the new DPIA NOTIFY packets from DMUB As per the design with Cruise to account for 250ms response delay otherwise [HOW] Added th DPIA NOTIFY logic as per DMUB logic Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Jasdeep Dhillon <[email protected]> Signed-off-by: Mustapha Ghaddar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-23drm/amd/display: Add margin on DRR vblank start for subvpAlvin Lee1-1/+2
[Description] - Add margin for HUBP "jitter" for SubVp + DRR case - Also do a min transition even if MPO is added on a non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR) Reviewed-by: Jun Lei <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-15drm/amd/display: [FW Promotion] Release 0.0.143.0Anthony Koo1-1/+2
- New boot options to enable USB4 DP BW Allocation mode in DPIA Reviewed-by: Aric Cyr <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amd/display: Waiting for 1 frame to fix the flash issue on PSR1Ryan Lin1-1/+5
[Why] Needs more frames waiting before the PSR_Exit sending for the specific TCON. [How] Add relock_delay_frame_cnt to control how many frames waiting are needed before the PSR_Exit sending. The default value is 0. The Driver side can set this variable for specific TCONs. Reviewed-by: Robin Chen <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Ryan Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-01drm/amd/display: [FW Promotion] Release 0.0.141.0Anthony Koo1-0/+6
- Add flag as a status read back that indicates back to back flips detected during psr. Reviewed-by: Aric Cyr <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Mark Broadworth <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-27drm/amd/display: Document part of the DMUB cmdAnthony Koo1-1/+12
Add a simple documentation in the dmub_cmd. Tested-by: Mark Broadworth <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-27drm/amd/display: Implement secure display on DCN21Alan Liu1-0/+26
[Why] Porting secure display feature from DCN10 to DCN21. Support single display for now and will extend to multiple displays. [How] - use workqueue to offload works for dmub or dmcu firmware - after receiving ROI update from userspace, set skip_frame_cnt to 1 - refactor amdgpu_dm_crtc_handle_crc_window_irq() - disable PSR before activating secure_display on a crtc - check if secure_display is activated before enabling psr - only work for single display for now. Tested-by: Mark Broadworth <[email protected]> Reviewed-by: Wayne Lin <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alan Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-10drm/amd/display: Use set_vtotal_min_max to configure OTG VTOTALRodrigo Siqueira1-4/+0
In multiple parts of the DCN code, we write directly to the OTG_V_TOTAL_* registers in some OPTC functions. Let's avoid it by using the set_vtotal_min_max. Tested-by: Daniel Wheeler <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-10drm/amd/display: Display does not light up after S4 resumeMeenakshikumar Somasundaram1-1/+20
[Why] Dpia hpd interrupt processing is disabled when entering S4/S0i3 and would be reenabled after detection completes during resuming. Because, keeping hpd interrupts enabled during detection leads to multiple detections for the same hpd transition. There is a S4 case where dpia hpd interrupt is missed when driver is in transitioning from hpd interrupt processing disable to enable and the display does not light up. [How] - Added dmub inbox command DMUB_CMD__DPIA_HPD_INT_ENABLE to explicitly control dmub to issue dpia hpd interrupt or not. If dpia hpd interrupt is disabled, dmub will keep the hpd pending and post it once driver reenables dpia hpd interrupt or when querying with DMUB_CMD__QUERY_HPD_STATE. - Added dmub boot option dpia_hpd_int_enable_supported to notify dmub about whether DMUB_CMD__DPIA_HPD_INT_ENABLE command would be used. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Mustapha Ghaddar <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Meenakshikumar Somasundaram <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-10drm/amd/display: Use the same cursor info across featuresMax Tseng1-7/+108
Since different features would need to update cursor registers, However, they would use different approaches. To unify varied methods, this refactor is implemented the same update cursor info method for current varied features. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Max Tseng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-29drm/amd/display: Cursor Info Update refactorMax Tseng1-0/+5
Dc: cursor info update: phase 1: [Why] Different feature might need to update cursor info, but With different approaches. To unify this diversity problem, all features should use The same interface to update cursor. Reviewed-by: Reza Amini <[email protected]> Acked-by: Jasdeep Dhillon <[email protected]> Signed-off-by: Max Tseng <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-19drm/amd/display: [FW Promotion] Release 0.0.134.0Anthony Koo1-1/+2
- Handle pipe split case for SubVP: Pass in pipe split index for main and phantom pipes Reviewed-by: Aric Cyr <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-29drm/amd/display: [FW Promotion] Release 0.0.132.0Anthony Koo1-2/+1
- Fix comment to indicate correct visual confirm option Reviewed-by: Aric Cyr <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-29drm/amd/display: Add support for visual confirm colorLeo (Hanghong) Ma1-0/+44
[Why] We want to get the visual confirm color of the bottom-most pipe for test automation. [How] Save the visual confirm color to plane_state before program to MPC; Reviewed-by: Anthony Koo <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Leo (Hanghong) Ma <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.