aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)AuthorFilesLines
2024-07-23drm/amd/display: Add option to allow transition when odm is forcedSridevi Arvindekar2-1/+8
Added option to allow transition for forced odm. Add the variation to the nightly run. Reviewed-by: Wenjing Liu <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Sridevi Arvindekar <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: avoid disable otg when dig was disabledJingwen Zhu3-3/+25
[Why] This is a workaround for an dcn3.1 hang that happens if otg dispclk is ramped while otg is on and stream enc is off. But this w/a should not trigger when we have a dig active. [How] Avoid disable otg when dig FE/BE FIFO was not switched. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Jingwen Zhu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Implement bias and scale pre sclRelja Vojvodic7-14/+43
why: New scaler needs the input to be full range color space. This will also fix issues that come up due to not having a predefined limited color space matrix for certain color spaces how: Use bias and scale HW to expand the range of limited color spaces to full before the scaler Reviewed-by: Krunoslav Kovac <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Relja Vojvodic <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: apply vmin optimization even if it doesn't reach vmin levelWenjing Liu2-7/+20
[why] Based on power measurement result, in most cases when display clock is higher than Vmin display clock, lowering display clock using dynamic ODM will improve overall power consumption by 0 to 4 watts even if we can't reach Vmin. [how] Allow vmin optimization applied even if dispclk can't reach Vmin. Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: fix dscclk programming sequence on DCN401Wenjing Liu8-59/+58
[why] The mux to switch between refclk and dto_dsc_clk is non double buffered. However dto dsc clk's phase and modulo divider registers are currently configured as double buffered update. This causes a problem when we switch to use dto dsc clk and program phase and modulo in the same sequence. In this sequence dsc clk is switched to dto but the clock divider programming doesn't take effect until next frame. When we try to program DSCC registers, SMN bus will hang because dto dsc clk divider phase is set to 0. [how] Configure phase and modulo to take effect immediately. Always switch to dto dsc clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated. Acked-by: Rodrigo Siqueira <[email protected]> Reviewed-by: Jerry Zuo <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Replace assert with error message in dp_retrieve_lttpr_cap()Roman Li1-1/+5
[Why] When assert in dp_retrieve_lttpr_cap() is hit, dmesg has traces like: RIP: 0010:dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] Call Trace: <TASK> dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] report_bug+0x1e8/0x240 handle_bug+0x46/0x80 link_detect+0x35/0x580 [amdgpu] It happens when LTTPRs fail to increment dpcd repeater count. We have a recovery action in place for such cases. Assert is misleading, an indicative error in dmesg is more useful. [How] Remove ASSERT and use DC_LOG_ERROR instead. Reviewed-by: Michael Strauss <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Added logging for automated DPM testingRyan Seto7-57/+237
[Why] Added clock logs to automate DPM testing [How] Added logs and helper functions to output clocks Co-authored-by: Ryan Seto <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Ryan Seto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Don't consider cursor for no plane case in DML1Alvin Lee1-0/+2
[Description] For no plane scenarios we should not consider cursor as there cannot be any cursor if there's no planes. This fixes an issue where dc_commit_streams fails due to prefetch bandwidth requirements (the display config + dummy planes + cursor causes the prefetch bandwidth to exceed what is possible). Reviewed-by: Chaitanya Dhere <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: quality improvements for EASF and ISHARPSamson Tam18-710/+3149
[Why] Update coefficients and LUT tables for scaler and sharpener to improve quality and support different use cases (SDR/HDR) [How] Move scaler coefficients to new file dc_spl_scl_easf_filters.c Remove older coefficients file dc_sp_scl_filters_old.c Update default taps for EASF support Update LLS policy for DON'T CARE case Update cositing offset from 0.5 to 0.25 Add support to adjust sharpness based on level, use case, and scaling ratio ( using discrete levels ) Apply sharpness to all RGB surfaces and both NV12 and P010 video ( in fullscreen only ). Upscale and 1:1 ratios only Enable scaler when sharpening 1:1 ratios Add support for coefficients that are in S1.10 format (convert to S1.12 format) Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Samson Tam <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Disable HBR audio for DP2 for certain ASICsAlvin Lee9-0/+19
[Description] Due to a HW bug, HBR audio is not supported for DP2 encoders for certain ASICs. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-17drm/amd/display: fix corruption with high refresh rates on DCN 3.0Alex Deucher2-12/+13
This reverts commit bc87d666c05a13e6d4ae1ddce41fc43d2567b9a2 and the register changes from commit 6d4279cb99ac4f51d10409501d29969f687ac8dc. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3412 Cc: [email protected] Cc: Rodrigo Siqueira <[email protected]> Tested-by: Mikhail Gavrilov <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.10.x
2024-07-16drm/amd/display: Add simple struct doc to remove doc build warningRodrigo Siqueira2-5/+32
This commit is a part of a series that addresses the following build warning for opp: ./drivers/gpu/drm/amd/display/dc/inc/hw/opp.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/inc/hw/dpp.h:1: warning: no structured comments found This commit fixes this issue by adding a simple kernel-doc to a struct in the opp.h and the dpp.h files. Cc: Alex Deucher <[email protected]> Acked-by: Alex Deucher <[email protected]> Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-16drm/amd/display: Move DIO documentation to the right placeRodrigo Siqueira2-9/+29
When building the kernel-doc, it complains with the below warning: ./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found This warning was caused by the wrong use of the ':export:' and the lack of function documentation in the file pointed under the ':internal:'. This commit addresses those issues by relocating the overview documentation to the correct C file, removing the ':export:' options, and adding two simple kernel-doc to ensure that ':internal:' does not have any warning. Cc: Alex Deucher <[email protected]> Acked-by: Alex Deucher <[email protected]> Reported-by: Stephen Rothwell <[email protected]> Link: https://lore.kernel.org/dri-devel/[email protected]/ Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-16drm/amd/display: Add doc entry for program_3dlut_sizeAlex Hung1-0/+14
Fixes the warning: Function parameter or struct member 'program_3dlut_size' not described in 'mpc_funcs' Reported-by: Stephen Rothwell <[email protected]> Closes: https://lore.kernel.org/dri-devel/[email protected]/ Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Avoid pointer type value compared with 0 to make code clear. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_factory.c:14:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Avoid pointer type value compared with 0 to make code clear. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_factory.c:24:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Avoid pointer type value compared with 0 to make code clear. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_mcg/dml2_mcg_factory.c:19:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Avoid pointer type value compared with 0 to make code clear. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_factory.c:31:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix unsigned comparison with less than zeroJiapeng Chong1-9/+6
The return value from the call to dml21_find_dc_pipes_for_plane() is int. However, the return value is being assigned to an unsigned int variable 'num_pipes', the condition if(num_pipes <= 0) is not rigorous enough, so making 'num_pipes' an int. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:318:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:360:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9454 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: 3.2.291Aric Cyr1-1/+1
* FW Release 0.0.224.0 * Fix bw issue for dcn351 * Fix FAMS2 logic issue for dcn401 * Fix Coverity issues * Fix cursor issues * Refactor dio sources Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupportRoman Li1-1/+1
[Why] Potential out of bounds access in dml2_calculate_rq_and_dlg_params() because the value of out_lowest_state_idx used as an index for FCLKChangeSupport array can be greater than 1. [How] Currently dml2 core specifies identical values for all FCLKChangeSupport elements. Always use index 0 in the condition to avoid out of bounds access. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Update efficiency bandwidth for dcn351Fangzhi Zuo1-0/+1
Fix 4k240 underflow on dcn351 Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: replace CRTC disable function callXi (Alex) Liu1-2/+2
[Why] In OTG disable workarund, CRTC is disabled immediately to improve performance, but this may cause timing issue in DP HPO encoder FIFO and result in blank CRCs. [How] Replace the immediate CRTC disable call with normal disable call Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Xi (Alex) Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Move dio files into dio folderBhuvanachandra Pinninti19-5/+37
[why] Refactor the code of dio to unit test. [how] Moved files to respective folders and changed cMakeLists and makefiles. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Bhuvanachandra Pinninti <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Account for cursor prefetch BW in DML1 mode supportAlvin Lee1-0/+3
[Description] We need to ensure to take into account cursor prefetch BW in mode support or we may pass ModeQuery but fail an actual flip which will cause a hang. Flip may fail because the cursor_pre_bw is populated during mode programming (and mode programming is never called prior to ModeQuery). Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Nevenko Stupar <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: fix a crash when clock source is reference for non otg ↵Wenjing Liu1-18/+20
master pipe [why] The function enumerates all pipes without checking pipe type. It is only supposed to call program pixel clock for OTG master pipe only. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Fix dmub timeout after fams2 enabledFangzhi Zuo1-1/+6
Reset fams stream count upon stream removal, otherwise fams2 state machine in dmub will get corrupted. Reviewed-by: Dillon Varone <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: un-block 8k with single dimmPaul Hsieh1-22/+0
[Why] Driver doesn't validate multi-display with scaling when OS calls DDI. This behavior causes the validated result to be a mismatch between some automated test cases. To address this issue, some workaround was added that caused issues in 8k. [How] Since the origin issue had been root caused, revert the previous workaround and unblock 8k with a single dimm. Reviewed-by: Aric Cyr <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Paul Hsieh <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Add available bandwidth calculation for audioRyan Seto2-6/+59
[Why] Audio for 8K 240Hz monitor was not available when it should be [How] Added calculation based on stream state Co-developed-by: Ryan Seto <[email protected]> Reviewed-by: George Shen <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Ryan Seto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Cleanup dce_get_dp_ref_freq_khzDillon Varone1-1/+1
[WHY&HOW] Cleanup unnecessary code pathes as compile guards were added and removed overtime. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Check denominator crb_pipes before usedAlex Hung1-1/+1
[WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Adjust cursor visibility between MPC slicesNevenko Stupar2-9/+39
[Why & How] When MPC enabled, need to adjust x and hot spot x position on one pipe when the cursor is between MPC slices i.e. when the cursor is moving from one MPC slice to next slice, while whole cursor size is not contained within one pipe, to make part of the cursor to be visible on the other pipe. Reviewed-by: Sridevi Arvindekar <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Nevenko Stupar <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Skip unnecessary abm disableSherry Wang1-0/+6
[Why] We try to disable abm immediately when it's being gradually disabled, which causes backlight ramping being paused in the middle [How] Don't disable abm immediately if abm has been or is being disabled through set_abm_level path Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Sherry Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Fix possible overflow in integer multiplicationAlex Hung11-22/+22
[WHAT & HOW] Integer multiplies integer may overflow in context that expects an expression of unsigned/siged long long (64 bits). This can be fixed by casting integer to unsigned/siged long long to force 64 bits results. This fixes 26 OVERFLOW_BEFORE_WIDEN issues reported by Coverity. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Add ASIC cap to limit DCC surface widthGeorge Shen3-0/+11
[Why] Certain configurations of DCN401 require ODM4:1 to support DCC for 10K surfaces. DCC should be conservatively disabled in those cases. The issue is that current logic limits 10K surface DCC for all configurations of DCN401. [How] Add DC ASIC cap to indicate max surface width that can support DCC. Disable DCC if this ASIC cap is non-zero and surface width exceeds it. Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Revert Add workaround to restrict max frac urgent for DPM0Teeger3-19/+0
This reverts commit 871512e36f9c1c2cb4e62eb860ca0438800e4d63 due to multiple issues found. Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Teeger <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Choose HUBP unbounded request based on DML outputSung Joon Kim1-10/+2
[why] Previously, we decide on the unbounded request purely based on pipe_cnt which is a wrong variable to use to determine how many pipes are in "use". DML already accounts for number of pipes in use along with other various factors and is a more reliable method of determination. [how] Use UnboundedRequestEnabledThisState to decide on unbounbded_req_enabled. Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Sung Joon Kim <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Fix divide by zero in CURSOR_DST_X_OFFSET calculationGeorge Shen1-2/+13
[Why] Certain situations cause pipes to have a recout of 0, such as when the dst_rect lies completely outside of a given ODM slice. [How] Skip calculation that transforms cursor coordinates to viewport space. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Fix null pointer deref in dcn20_resource.cAurabindo Pillai1-4/+5
Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu] Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Add null check before access structsMa Ke1-0/+2
In enable_phantom_plane, we should better check null pointer before accessing various structs. Fixes: 09a4ec5da92c ("drm/amd/display: Refactor dc_state interface") Signed-off-by: Ma Ke <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: use swap() in is_config_schedulable()Jiapeng Chong1-7/+4
Use existing swap() function rather than duplicating its implementation. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_dcn4_fams2.c:1171:103-104: WARNING opportunity for swap(). ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_dcn4_fams2.c:1231:99-100: WARNING opportunity for swap(). Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9400 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Fix Makefile copyright noticesAlex Deucher4-29/+8
Leftover copy pasta from original code. Reviewed-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-06-27drm/amd/display: 3.2.290Aric Cyr1-1/+1
This version brings along the following: - Enable DCC on DCN401 - Add reg definitions for DCN401 DCC - Remove duplicate null check - Remove always true condition - Validate function returns - Ensure curve to hw translation succeed - Use periodic detection for ipx/headless - Fix 1DLUT setting for NL SDR blending - Adjust reg field for DSC wait for disconnect - Remove a redundant check in authenticated_dp - Add HW cursor visual confirm - Fix cursor issues with ODMs and magnification - Wait for double buffer update on ODM changes - Reset DSC memory status - Program CURSOR_DST_X_OFFSET in viewport space - Add null checks before accessing struct elements - Fix reduced resolution and refresh rate - Make DML2.1 P-State method force per stream - Add workaround to restrict max frac urgent for DPM0 - Call dpmm when checking mode support - resync OTG after DIO FIFO resync - Always enable HPO for DCN4 dGPU - Use sw cursor for DCN401 with rotation - Add Replay general cmd - Check HDCP returned status - Check and log for function error codes - Check and log for function error codes - Remove useless function call - Fix uninitialized variables in dcn401 - Fix cursor size issues - Run DC_LOG_DC after checking link->link_enc - Remove redundant checks for pipe_ctx->stream - Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present - Fix cursor issues with ODMs and HW rotations - Remove unnecessary variable - Remove redundant var from display_rq_dig_calc in dml - Refactor dccg401_get_other_enable_symclk_fe Acked-by: Alex Hung <[email protected]> Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Enable DCC on DCN401Aurabindo Pillai22-2/+433
[WHAT] Add registers and entry points to enable DCC on DCN4x Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Remove always true conditionAlex Hung1-3/+1
[WHAT & HOW] advanced_pstate_switching was initialized to false and never assigned to another value; as a result !advanced_pstate_switching is always true and should be removed. This fixes 2 DEADCODE issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Validate function returnsAlex Hung3-5/+8
[WHAT & HOW] Function return values must be checked before data can be used in subsequent functions. This fixes 4 CHECKED_RETURN issues reported by Coverity. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Ensure curve to hw translation succeedAlex Hung2-4/+10
[WHAT & HOW] Check cm3_helper_translate_curve_to_hw_format runs successfully so the regamma_params is valid and can be used. Also revmoed two result assignments. This fixes 2 CHECKED_RETURN UNUSED_VALUE issues reported by Coverity. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Fix 1DLUT setting for NL SDR blendingRelja Vojvodic1-2/+2
[WHY] Enabling NL SDR blending caused the 1D LUTs to be set/populated in two different functions. This caused flickering as the LUT was set differently by the two functions, one of which should only have been modifying the 1D LUT if 3D LUT was enabled. [HOW] Added check to only modify the 1D LUT in populate_mcm if 3D LUT was enabled. Added blend_tf function update for non-main planes if the 3D LUT path was taken. Reviewed-by: Ilya Bakoulin <[email protected]> Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Relja Vojvodic <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Adjust reg field for DSC wait for disconnectRyan Seto3-3/+6
[WHY] DSC was waiting for the wrong field to disconnect cleanly. [HOW] Changed field the DSC disconnect was waiting on. Reviewed-by: Wenjing Liu <[email protected]> Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Ryan Seto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-06-27drm/amd/display: Add HW cursor visual confirmRyan Seto2-0/+30
[WHY] Added HW cursor visual confirm [HOW] Added visual confirm logic when programming cursor positions. HW is programmed on cursor updates since cursor can change without flips. Reviewed-by: Alvin Lee <[email protected]> Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Ryan Seto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.