Age | Commit message (Collapse) | Author | Files | Lines |
|
[why]
when gfx do soft reset, mes will also do reset, if mes is not
resumed when do recover from soft reset, mes is unable to respond
in later sequence
[how]
resume mes when do gfx post soft reset
Signed-off-by: Tong Liu01 <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.
[ 96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset
[ 100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002
[ 100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed!
[ 100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62
[ 100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62
[ 100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs
[ 100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62
We can skip the reset on APUs, assuming we can resume them
properly. Verified on some GFX11, GFX10 and old GFX9 APUs.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Move the amdgpu_acpi_should_gpu_reset out of
CONFIG_SUSPEND to share it with hibernate case.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
amdgpu_bo_gpu_offset_no_check() already calls
amdgpu_gmc_sign_extend() so no need to call it twice.
Reviewed-by: Yang Wang <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Cross-subsystem Changes:
- Add drm_bridge.h to drm_bridge maintainers.
Core Changes:
- Assorted fixes to TTM, tests, format-helper, accel.
- Assorted Makefile fixes to drivers and accel.
- Implement fbdev emulation for GEM DMA drivers, and convert a lot of
drivers to use it.
- Use tgid instead of pid for tracking clients.
Driver Changes:
- Assorted fixes in rockchip, vmwgfx, nouveau, cirrus.
- Add imx25 driver.
- Add Elida KD50T048A, Sony TD4353, Novatek NT36523, STARRY 2081101QFH032011-53G panels.
- Add 4K mode support to rockchip.
- Convert cirrus to use regular atomic helpers, and more cirrus
improvements.
- Add damage clipping to cirrus, virtio.
[airlied: add drm_bridge.h include to imx]
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.4-2023-03-17:
amdgpu:
- Misc code cleanups
- Documentation fixes
- Make kobj structures const
- Add thermal throttling adjustments for supported APUs
- UMC RAS fixes
- Display reset fixes
- DCN 3.2 fixes
- Freesync fixes
- DC code reorg
- Generalize dmabuf import to work with KFD
- DC DML fixes
- SRIOV fixes
- UVD code cleanups
- IH 4.4.2 updates
- HDP 4.4.2 updates
- SDMA 4.4.2 updates
- PSP 13.0.6 updates
- Add capped/uncapped workload handling for supported APUs
- DCN 3.1.4 updates
- Re-org DC Kconfig
- USB4 fixes
- Reorg DC plane and stream handling
- Register vga_switcheroo for apple-gmux
- SMU 13.0.6 updates
- Fix error checking in read_mm_registers functions for affected families
- VCN 4.0.4 fix
- Drop redundant pci_enable_pcie_error_reporting() call
- RDNA2 SMU OD suspend/resume fix
- Expose additional memory stats via fdinfo
- RAS fixes
- Misc display fixes
- DP MST fixes
- IOMMU regression fix for KFD
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- NBIO fixes
- Misc code cleanups
- Fix possible double free
- Fix possible UAF
radeon:
- iMac fix
UAPI:
- KFD dmabuf export support. Required for importing KFD buffers into GEM contexts and for RDMA P2P support.
Proposed user mode changes: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Not needed since from vi. drop the function so
we don't duplicate code when introduce new asics.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Replace soc15, nv, soc21 get_rev_id callback with common
helper so we don't need to duplicate code when introduce
new asics.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Replace soc15, nv, soc21 specific callbacks with common
one. so we don't need to duplicate code when introduce
new asics.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
amdgpu_ras_register_ras_block should always be invoked
by ras_sw_init, where driver needs to check ras caps
at ip level, instead of asic level.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
pcie_bif ras blocks needs to be initialized as early
as possible to handle fatal error detected in hw_init
phase. also align the pcie_bif ras sw_init with other
ras blocks
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
To align with other IP blocks.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
To align with other IP blocks
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
If disable the mmhub vm contexts(set MMVM_CONTEXTS_DISABLE to 0xffff),
driver loading failed on vf due to fence fallback timer expired on all rings.
FLR cannot reset MMVM_CONTEXTS_DISABLE.
So this vf can not be recovered anymore unless trigger a whole gpu reset.
[How]
Under SRIOV, init MMVM_CONTEXTS_DISABLE in gmc11 golden register setting.
Signed-off-by: Yifan Zha <[email protected]>
Reviewed-by: Horace Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Thread group id (aka pid from userspace point of view) is a more
interesting thing to show as an owner of a DRM fd, so track and show that
instead of the thread id.
In the next patch we will make the owner updated post file descriptor
handover, which will also be tgid based to avoid ping-pong when multiple
threads access the fd.
Signed-off-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The VCN firmware loading path enables the indirect SRAM mode if it's
advertised as supported. We might have some cases of FW issues that
prevents this mode to working properly though, ending-up in a failed
probe. An example below, observed in the Steam Deck:
[...]
[drm] failed to load ucode VCN0_RAM(0x3A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0000)
amdgpu 0000:04:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vcn_dec_0 test failed (-110)
[drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <vcn_v3_0> failed -110
amdgpu 0000:04:00.0: amdgpu: amdgpu_device_ip_init failed
amdgpu 0000:04:00.0: amdgpu: Fatal error during GPU init
[...]
Disabling the VCN block circumvents this, but it's a very invasive
workaround that turns off the entire feature. So, let's add a quirk
on VCN loading that checks for known problematic BIOSes on Vangogh,
so we can proactively disable the indirect SRAM mode and allow the
HW proper probe and VCN IP block to work fine.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2385
Fixes: 82132ecc5432 ("drm/amdgpu: enable Vangogh VCN indirect sram mode")
Cc: [email protected]
Cc: James Zhu <[email protected]>
Cc: Leo Liu <[email protected]>
Signed-off-by: Guilherme G. Piccoli <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Copy paste error.
Fixes: 384334120b66 ("drm/amdgpu/nv: don't expose AV1 if VCN0 is harvested")
Reported-by: Abaci Robot <[email protected]>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4454
Cc: Jiapeng Chong <[email protected]>
Acked-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Some amd asics having reliable hotplug support don't call
drm_kms_helper_poll_init in driver init sequence. However,
due to the unified suspend/resume path for all asics, because
the output_poll_work->func is not set for these asics, a warning
arrives when suspending.
[ 90.656049] <TASK>
[ 90.656050] ? console_unlock+0x4d/0x100
[ 90.656053] ? __irq_work_queue_local+0x27/0x60
[ 90.656056] ? irq_work_queue+0x2b/0x50
[ 90.656057] ? __wake_up_klogd+0x40/0x60
[ 90.656059] __cancel_work_timer+0xed/0x180
[ 90.656061] drm_kms_helper_poll_disable.cold+0x1f/0x2c [drm_kms_helper]
[ 90.656072] amdgpu_device_suspend+0x81/0x170 [amdgpu]
[ 90.656180] amdgpu_pmops_runtime_suspend+0xb5/0x1b0 [amdgpu]
[ 90.656269] pci_pm_runtime_suspend+0x61/0x1b0
drm_kms_helper_poll_enable/disable is valid when poll_init is called in
amdgpu code, which is only used in non DC path. So move such codes into
non-DC path code to get rid of such warnings.
v1: introduce use_kms_poll flag in amdgpu as the poll stuff check
v2: use dc_enabled as the flag to simply code
v3: move code into non DC path instead of relying on any flag
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2411
Fixes: a4e771729a51 ("drm/probe_helper: sort out poll_running vs poll_enabled")
Reported-by: Bert Karwatzki <[email protected]>
Suggested-by: Dmitry Baryshkov <[email protected]>
Suggested-by: Alex Deucher <[email protected]>
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
for sriov, we added a new flag to indicate av1 support,
this will override the original caps info.
Signed-off-by: Jane Jian <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The VCN firmware loading path enables the indirect SRAM mode if it's
advertised as supported. We might have some cases of FW issues that
prevents this mode to working properly though, ending-up in a failed
probe. An example below, observed in the Steam Deck:
[...]
[drm] failed to load ucode VCN0_RAM(0x3A)
[drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0000)
amdgpu 0000:04:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vcn_dec_0 test failed (-110)
[drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <vcn_v3_0> failed -110
amdgpu 0000:04:00.0: amdgpu: amdgpu_device_ip_init failed
amdgpu 0000:04:00.0: amdgpu: Fatal error during GPU init
[...]
Disabling the VCN block circumvents this, but it's a very invasive
workaround that turns off the entire feature. So, let's add a quirk
on VCN loading that checks for known problematic BIOSes on Vangogh,
so we can proactively disable the indirect SRAM mode and allow the
HW proper probe and VCN IP block to work fine.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2385
Fixes: 82132ecc5432 ("drm/amdgpu: enable Vangogh VCN indirect sram mode")
Cc: [email protected]
Cc: James Zhu <[email protected]>
Cc: Leo Liu <[email protected]>
Signed-off-by: Guilherme G. Piccoli <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Copy paste error.
Fixes: 384334120b66 ("drm/amdgpu/nv: don't expose AV1 if VCN0 is harvested")
Reported-by: Abaci Robot <[email protected]>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4454
Cc: Jiapeng Chong <[email protected]>
Acked-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initialize hdp ras block only when mmhub ip block
supports ras features. Driver queries ras capabilities
after early_init, ras block init needs to be moved to
sw_init.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initialize mmhub ras block only when mmhub ip block
supports ras features. Driver queries ras capabilities
after early_init, ras block init needs to be moved to
sw_init.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use default gfx ras_late_init callback for gfx
ras block.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initialize umc ras block only when umc ip block
supports ras. Driver queries ras capabilities after
early_init, ras block init needs to be moved to
sw_init.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initialize vcn ras block only when vcn ip block
supports ras features. Driver queries ras capabilities
after early_init, ras block init needs to be moved to
sw_int.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initialize jpeg ras block only when jpeg ip block
supports ras features. Driver queries ras capabilities
after early_init, ras block init needs to be moved to
sw_int.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Some amd asics having reliable hotplug support don't call
drm_kms_helper_poll_init in driver init sequence. However,
due to the unified suspend/resume path for all asics, because
the output_poll_work->func is not set for these asics, a warning
arrives when suspending.
[ 90.656049] <TASK>
[ 90.656050] ? console_unlock+0x4d/0x100
[ 90.656053] ? __irq_work_queue_local+0x27/0x60
[ 90.656056] ? irq_work_queue+0x2b/0x50
[ 90.656057] ? __wake_up_klogd+0x40/0x60
[ 90.656059] __cancel_work_timer+0xed/0x180
[ 90.656061] drm_kms_helper_poll_disable.cold+0x1f/0x2c [drm_kms_helper]
[ 90.656072] amdgpu_device_suspend+0x81/0x170 [amdgpu]
[ 90.656180] amdgpu_pmops_runtime_suspend+0xb5/0x1b0 [amdgpu]
[ 90.656269] pci_pm_runtime_suspend+0x61/0x1b0
drm_kms_helper_poll_enable/disable is valid when poll_init is called in
amdgpu code, which is only used in non DC path. So move such codes into
non-DC path code to get rid of such warnings.
v1: introduce use_kms_poll flag in amdgpu as the poll stuff check
v2: use dc_enabled as the flag to simply code
v3: move code into non DC path instead of relying on any flag
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2411
Fixes: a4e771729a51 ("drm/probe_helper: sort out poll_running vs poll_enabled")
Reported-by: Bert Karwatzki <[email protected]>
Suggested-by: Dmitry Baryshkov <[email protected]>
Suggested-by: Alex Deucher <[email protected]>
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The convert from adev is redundant.
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
pm_sysfs_en is overlapped with pm.sysfs_initialized, so drop it
for simplifying code(no functional change).
Signed-off-by: Guchun Chen <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This will be used for performance investigations.
Signed-off-by: Marek Olšák <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
for sriov, we added a new flag to indicate av1 support,
this will override the original caps info.
Signed-off-by: Jane Jian <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Backmerging to get v6.3-rc1 and sync with the other DRM trees.
Signed-off-by: Thomas Zimmermann <[email protected]>
|
|
Added the video capability query support for VCN version 4_0_4
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.1.x
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Actually, the drm_dev_enter in psp_cmd_submit_buf does not
protect anything. If DRM device is unplugged, it will always
check the condition in WARN_ON. So drop drm_dev_enter and
drm_dev_exit in psp_cmd_submit_buf.
When removing amdgpu, the calling order is as follows:
amdgpu_pci_remove
drm_dev_unplug
amdgpu_driver_unload_kms
amdgpu_device_fini_hw
amdgpu_device_ip_fini_early
psp_hw_fini
psp_ras_terminate
psp_ta_unloadye
psp_cmd_submit_buf
[ 4507.740388] Call Trace:
[ 4507.740389] <TASK>
[ 4507.740391] psp_ta_unload+0x44/0x70 [amdgpu]
[ 4507.740485] psp_ras_terminate+0x4d/0x70 [amdgpu]
[ 4507.740575] psp_hw_fini+0x28/0xa0 [amdgpu]
[ 4507.740662] amdgpu_device_fini_hw+0x328/0x442 [amdgpu]
[ 4507.740791] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 4507.740875] amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 4507.740962] ? _raw_spin_unlock_irqrestore+0x27/0x43
[ 4507.740965] ? __pm_runtime_resume+0x60/0x90
[ 4507.740968] pci_device_remove+0x39/0xb0
[ 4507.740971] device_remove+0x46/0x70
[ 4507.740972] device_release_driver_internal+0xd1/0x160
[ 4507.740974] driver_detach+0x4a/0x90
[ 4507.740975] bus_remove_driver+0x6c/0xf0
[ 4507.740976] driver_unregister+0x31/0x50
[ 4507.740977] pci_unregister_driver+0x40/0x90
[ 4507.740978] amdgpu_exit+0x15/0x120 [amdgpu]
v2: fix commit message style issue
Signed-off-by: lyndonli <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The same strapping initialization issue that happened on NBIO 7.5.1
appears to be happening on NBIO 7.3.0.
Apply the same fix to 7.3.0 as well.
Note: This workaround relies upon the integrated GPU being enabled
in BIOS. If the integrated GPU is disabled in BIOS a different
workaround will be required.
Reported-by: Thomas Glanzmann <[email protected]>
Cc: Basavaraj Natikar <[email protected]>
Link: https://lore.kernel.org/linux-usb/Y%[email protected]/T/#u
Signed-off-by: Mario Limonciello <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
On GPUs with RAS enabled, below call trace and hang are observed when
shutting down device.
v2: use DRM device unplugged flag instead of shutdown flag as the check to
prevent memory wipe in shutdown stage.
[ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu]
[ +0.000001] PKRU: 55555554
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu]
[ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu]
[ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu]
[ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[ +0.000090] drm_dev_release+0x28/0x50 [drm]
[ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm]
[ +0.000011] devm_action_release+0x15/0x20
[ +0.000003] release_nodes+0x40/0xc0
[ +0.000001] devres_release_all+0x9e/0xe0
[ +0.000001] device_unbind_cleanup+0x12/0x80
[ +0.000003] device_release_driver_internal+0xff/0x160
[ +0.000001] driver_detach+0x4a/0x90
[ +0.000001] bus_remove_driver+0x6c/0xf0
[ +0.000001] driver_unregister+0x31/0x50
[ +0.000001] pci_unregister_driver+0x40/0x90
[ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu]
Signed-off-by: lyndonli <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Added the video capability query support for VCN version 4_0_4
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The amdgpu driver tries to use fields not supported by UML's cpuinfo
struct. Disable the driver when targeting UML to avoid tripping up
allyesconfig.
e.g.
../drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_hwmgr.c: In function ‘intel_core_rkl_chk’:
../drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_hwmgr.c:1742:33: error: initialization of ‘struct cpuinfo_x86 *’ from incompatible pointer type ‘struct cpuinfo_um *’ [-Werror=incompatible-pointer-types
]
../drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c: In function ‘kfd_cpumask_to_apic_id’:
../drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:2157:48: error: ‘struct cpuinfo_um’ has no member named ‘apicid’
Acked-by: Felix Kuehling <[email protected]>
Signed-off-by: Peter Foley <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Don't need to query error count and error address on harvest umc nodes.
v2: Fix code bug, use active_mask instead of harvsest_config
and remove unnecessary argument in LOOP macro.
v3: Leave adev->gmc.num_umc unchanged.
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Properly skip non-existent registers as well.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Actually, the drm_dev_enter in psp_cmd_submit_buf does not
protect anything. If DRM device is unplugged, it will always
check the condition in WARN_ON. So drop drm_dev_enter and
drm_dev_exit in psp_cmd_submit_buf.
When removing amdgpu, the calling order is as follows:
amdgpu_pci_remove
drm_dev_unplug
amdgpu_driver_unload_kms
amdgpu_device_fini_hw
amdgpu_device_ip_fini_early
psp_hw_fini
psp_ras_terminate
psp_ta_unloadye
psp_cmd_submit_buf
[ 4507.740388] Call Trace:
[ 4507.740389] <TASK>
[ 4507.740391] psp_ta_unload+0x44/0x70 [amdgpu]
[ 4507.740485] psp_ras_terminate+0x4d/0x70 [amdgpu]
[ 4507.740575] psp_hw_fini+0x28/0xa0 [amdgpu]
[ 4507.740662] amdgpu_device_fini_hw+0x328/0x442 [amdgpu]
[ 4507.740791] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 4507.740875] amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 4507.740962] ? _raw_spin_unlock_irqrestore+0x27/0x43
[ 4507.740965] ? __pm_runtime_resume+0x60/0x90
[ 4507.740968] pci_device_remove+0x39/0xb0
[ 4507.740971] device_remove+0x46/0x70
[ 4507.740972] device_release_driver_internal+0xd1/0x160
[ 4507.740974] driver_detach+0x4a/0x90
[ 4507.740975] bus_remove_driver+0x6c/0xf0
[ 4507.740976] driver_unregister+0x31/0x50
[ 4507.740977] pci_unregister_driver+0x40/0x90
[ 4507.740978] amdgpu_exit+0x15/0x120 [amdgpu]
v2: fix commit message style issue
Signed-off-by: lyndonli <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Treat the last page in a non-contiguous range as part of the following
contiguous range.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Philip Yang <[email protected]>
Reviewed-and-tested-by: Rajneesh Bhardwaj <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|