aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu
AgeCommit message (Collapse)AuthorFilesLines
2019-08-12drm/amdgpu: fix gfx9 soft recoveryPierre-Eric Pelloux-Prayer1-1/+1
The SOC15_REG_OFFSET() macro wasn't used, making the soft recovery fail. v2: use WREG32_SOC15 instead of WREG32 + SOC15_REG_OFFSET Signed-off-by: Pierre-Eric Pelloux-Prayer <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2019-08-06Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)"Marek Olšák2-12/+1
This reverts commit 9ed2c993d723129f85101e51b2ccc36ef5400a67. SET_CONFIG_REG writes to memory if register shadowing is enabled, causing a VM fault. NGG streamout is unstable anyway, so all UMDs should use legacy streamout. I think Mesa is the only driver using NGG streamout. Signed-off-by: Marek Olšák <[email protected]> Reviewed-by: Le Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-06drm/amdgpu: pin the csb buffer on hw init for gfx v8Likun Gao1-0/+40
Without this pin, the csb buffer will be filled with inconsistent data after S3 resume. And that will causes gfx hang on gfxoff exit since this csb will be executed then. Signed-off-by: Likun Gao <[email protected]> Tested-by: Paul Gover <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-02drm/amd/amdgpu/vcn_v2_0: Move VCN 2.0 specific dec ring test to vcn_v2_0Thong Thai1-1/+31
VCN 2.0 firmware now requires a packet start command to be sent before any other decode ring buffer command. Signed-off-by: Thong Thai <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-02drm/amd/amdgpu/vcn_v2_0: Mark RB commands as KMD commandsThong Thai2-6/+7
Sets the CMD_SOURCE bit for VCN 2.0 Decoder Ring Buffer commands. This bit was previously set by the RBC HW on older firmware. Newer firmware uses a SW RBC and this bit has to be set by the driver. Signed-off-by: Thong Thai <[email protected]> Reviewed-by: Leo Liu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-02Merge tag 'drm-fixes-5.3-2019-07-31' of ↵Dave Airlie4-41/+64
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.3-2019-07-31: amdgpu: - Fix temperature granularity for navi - Fix stable pstate setting for navi - Fix VCN DPM enablement on navi - Fix error handling on CS ioctl when processing dependencies - Fix possible information leak in debugfs amdkfd: - fix memory alignment for VegaM Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-31drm/amd/powerplay: correct UVD/VCE/VCN power status retrievalEvan Quan1-20/+36
VCN should be used for Vega20 later ASICs while UVD and VCE are for previous ASICs. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-31drm/amdgpu: fix a potential information leaking bugWang Xiayang1-1/+1
Coccinelle reports a path that the array "data" is never initialized. The path skips the checks in the conditional branches when either of callback functions, read_wave_vgprs and read_wave_sgprs, is not registered. Later, the uninitialized "data" array is read in the while-loop below and passed to put_user(). Fix the path by allocating the array with kcalloc(). The patch is simplier than adding a fall-back branch that explicitly calls memset(data, 0, ...). Also it does not need the multiplication 1024*sizeof(*data) as the size parameter for memset() though there is no risk of integer overflow. Signed-off-by: Wang Xiayang <[email protected]> Reviewed-by: Chunming Zhou <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-31drm/amdgpu: fix error handling in amdgpu_cs_process_fence_depChristian König1-14/+12
We always need to drop the ctx reference and should check for errors first and then dereference the fence pointer. Signed-off-by: Christian König <[email protected]> Reviewed-by: Chunming Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-31drm/amd/powerplay: fix null pointer dereference around dpm state relatesEvan Quan1-5/+13
DPM state relates are not supported on the new SW SMU ASICs. But still it's not OK to trigger null pointer dereference on accessing them. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-30drm/amdkfd: Fix byte align on VegaMKent Russell1-1/+2
This was missed during the addition of VegaM support Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Kent Russell <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-27Merge tag 'Wimplicit-fallthrough-5.3-rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva: "This marks switch cases where we are expecting to fall through, and globally enables the -Wimplicit-fallthrough option in the main Makefile. Finally, some missing-break fixes that have been tagged for -stable: - drm/amdkfd: Fix missing break in switch statement - drm/amdgpu/gfx10: Fix missing break in switch statement With these changes, we completely get rid of all the fall-through warnings in the kernel" * tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: Makefile: Globally enable fall-through warning drm/i915: Mark expected switch fall-throughs drm/amd/display: Mark expected switch fall-throughs drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning drm/amdgpu/gfx10: Fix missing break in switch statement drm/amdkfd: Fix missing break in switch statement perf/x86/intel: Mark expected switch fall-throughs mtd: onenand_base: Mark expected switch fall-through afs: fsclient: Mark expected switch fall-throughs afs: yfsclient: Mark expected switch fall-throughs can: mark expected switch fall-throughs firewire: mark expected switch fall-throughs
2019-07-26Merge tag 'drm-fixes-5.3-2019-07-24' of ↵Dave Airlie8-13/+51
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.3-2019-07-24: amdgpu: - RAS fixes for vega20 - Navi VCN fix - DC audio fixes - DC DSC fixes - DC dongle fixes - DC clk mgr fixes - Fix DDC lines on some RV2 boards - GDS fixes for compute - Navi SMU fixes ttm: - Use the same attributes when freeing d_page->vaddr Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-07-25drm/amdgpu/gfx10: Fix missing break in switch statementGustavo A. R. Silva1-0/+1
Add missing break statement in order to prevent the code from falling through to case AMDGPU_IRQ_STATE_ENABLE. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: a644d85a5cd4 ("drm/amdgpu: add gfx v10 implementation (v10)") Cc: [email protected] Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]>
2019-07-22drm/amdgpu/smu: move fan rpm query into the asic specific codeAlex Deucher1-2/+2
On vega20, there is an SMU message to query it. On navi, it's fetched from the metrics table. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-19Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds28-116/+202
Pull drm fixes from Daniel Vetter: "Dave is back in shape, but now family got it so I'm doing the pull. Two things worthy of note: - nouveau feature pull was way too late, Dave&me decided to not take that, so Ben spun up a pull with just the fixes. - after some chatting with the arm display maintainers we decided to change a bit how that's maintained, for more oversight/review and cross vendor collab. More details below: nouveau: - bugfixes - TU116 enabling (minor iteration) :w amdgpu: - large pile of fixes for new hw support this release (navi, vega20) - audio hotplug fix - bunch of corner cases and small fixes all over for amdgpu/kfd komeda: - back out some new properties (from this merge window) that needs more pondering. bochs: - fb pitch setup core: - a new panel quirk - misc fixes" * tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits) drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP drm/nouveau: fix memory leak in nouveau_conn_reset() drm/nouveau/dmem: missing mutex_lock in error path drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads drm/nouveau: fix bogus GPL-2 license header drm/nouveau: fix bogus GPL-2 license header drm/nouveau/i2c: Enable i2c pads & busses during preinit drm/nouveau/disp/tu102-: wire up scdc parameter setter drm/nouveau/core: recognise TU116 chipset drm/nouveau/kms: disallow dual-link harder if hdmi connection detected drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89. drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers drm/amd/display: Force uclk to max for every state drm/amdkfd: Remove GWS from process during uninit drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware ...
2019-07-18drm/amdgpu: use VCN firmware offset for cache windowLeo Liu1-3/+0
Since we are using the signed FW now, and also using PSP firmware loading, but it's still potential to break driver when loading FW directly instead of PSP, so we should add offset. Signed-off-by: Leo Liu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: drop ras self testHawking Zhang1-7/+0
this function is not needed any more. error injection is the only way to validate ras but it can't be executed in amdgpu_ras_init, where gpu is even not initialized Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: only allow error injection to UMC IP blockHawking Zhang1-0/+6
error injection to other IP blocks (except UMC) will be enabled until RAS feature stablize on those IP blocks Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: disable GFX RAS by defaultHawking Zhang1-1/+1
GFX RAS has not been stablized yet. disable GFX ras until it is fully funcitonal. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: do not create ras debugfs/sysfs node for ASICs that don't have ↵Hawking Zhang1-0/+6
ras ability driver shouldn't init any ras debugfs/sysfs node for ASICs that don't have ras hardware ability Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: Default disable GDS for compute VMIDsJoseph Greathouse4-0/+36
The GDS and GWS blocks default to allowing all VMIDs to access all entries. Graphics VMIDs can handle setting these limits when the driver launches work. However, compute workloads under HWS control don't go through the kernel driver. Instead, HWS firmware should set these limits when a process is put into a VMID slot. Disable access to these devices by default by turning off all mask bits (for OA) and setting BASE=SIZE=0 (for GDS and GWS) for all compute VMIDs. If a process wants to use these resources, they can request this from the HWS firmware (when such capabilities are enabled). HWS will then handle setting the base and limit for the process when it is assigned to a VMID. This will also prevent user kernels from getting 'stuck' in GWS by accident if they write GWS-using code but HWS firmware is not set up to handle GWS reset. Until HWS is enabled to handle GWS properly, all GWS accesses will MEM_VIOL fault the kernel. v2: Move initialization outside of SRBM mutex Signed-off-by: Joseph Greathouse <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlersAlex Deucher1-10/+0
The dpm sensor function already does this for us. This fixes the freq*_input files with the new SMU implementation. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-17drm/amd/amdgpu: Fix offset for vmid selection in debugfs interfaceTom St Denis1-1/+1
The register debugfs interface was using the wrong bitmask for vmid selection for GFX_CNTL. Signed-off-by: Tom St Denis <[email protected]> Acked-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-17drm/amd/powerplay: fix deadlock around smu_handle_task V2Evan Quan1-3/+0
As the lock was already held on the entrance to smu_handle_task. - V2: lock in small granularity Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-17drm/amdgpu: Fix silent amdgpu_bo_move failuresFelix Kuehling1-3/+37
Under memory pressure, buffer moves between RAM to VRAM can fail when there is no GTT space available. In those cases amdgpu_bo_move falls back to ttm_bo_move_memcpy, which seems to succeed, although it doesn't really support non-contiguous or invisible VRAM. This manifests as VM faults with corrupted page table entries in KFD eviction stress tests. Print some helpful messages when lack of GTT space is causing buffer moves to fail. Check that source and destination memory regions are supported by ttm_bo_move_memcpy before taking that fallback. Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-17drm/amdgpu: drop dead headerAlex Deucher2-33/+0
Not used anymore. Reviewed-by: Evan Quan <[email protected]> Acked-by: Christian König <[email protected]> Noticed-by: Dave Airlie <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-16drm/amdgpu/gfx10: set SH_MEM_CONFIG.INITIAL_INST_PREFETCHNicolai Hähnle1-17/+10
Prefetch mode 0 is not supported and can lead to hangs with certain very specific code patterns. Set a sound prefetch mode for all VMIDs rather than forcing all shaders to set the prefetch mode at the beginning. Reduce code duplication a bit while we're at it. Note that the 64-bit address mode enum and the retry all enum are both 0, so the only functional change is in the INITIAL_INST_PREFETCH field. Signed-off-by: Nicolai Hähnle <[email protected]> Reviewed-by: Marek Olšák <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-16drm/amdgpu: check kdb_bin_size to exclude kdb loading sequenceHawking Zhang1-1/+1
The legacy navi10 sos binary will not carry on kdb image. the kdb_start_addr is actually the start address of sys_drv image and shouldn't be sent to psp bootloader. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-16drm/amdgpu: Fix unaligned memory copiesFelix Kuehling1-0/+2
When starting a new mm_node, the page_offset becomes 0. Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-16drm/amdgpu: replace simple_strtol() by kstrtou32()Wang Xiayang1-1/+2
The simple_strtol() function is deprecated. kstrto[l,u32]() is the correct replacement as it can properly handle overflows. This patch replaces the deprecated simple_strtol() use introduced recently. As clk is of type uint32_t, we are safe to use kstrtou32(). It is also safe to return zero on string parsing error, similar to the case of returning zero if buf is empty in parse_clk(). Fixes: bb5a2bdf36a8 ("drm/amdgpu: support dpm level modification under virtualization v3") Signed-off-by: Wang Xiayang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-16drm/amd/amdgpu: hide #warning for missing DC configArnd Bergmann2-6/+0
It is annoying to have #warnings that trigger in randconfig builds like drivers/gpu/drm/amd/amdgpu/soc15.c:653:3: error: "Enable CONFIG_DRM_AMD_DC for display support on SOC15." drivers/gpu/drm/amd/amdgpu/nv.c:400:3: error: "Enable CONFIG_DRM_AMD_DC for display support on navi." Remove these and rely on the users to turn these on. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-16drm/amdgpu: Fix Vega20 Perf counter for pcie_bwKent Russell1-2/+8
The perf counter for Vega20 is 108, instead of 104 which it was on all previous GPUs, so add a check to use the appropriate value. Signed-off-by: Kent Russell <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-16drm/amd/amdgpu: Add missing select_me_pipe_q() for gfx10Tom St Denis1-0/+7
The ability to select GFX GRBM me/pipe/queue/vmid was missing from the gfx10 driver. This patch adds it. Used by the debugfs register interface to select GFX resources when read/writing registers. Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-16drm/amd/amdgpu: Add VMID to SRBM debugfs bank selectionTom St Denis6-13/+14
Add 5 bits to the offset for SRBM selection to handle VMIDs. Also update the select_me_pipe_q() callback to also select VMID. Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-16drm/amdkfd: Consistently apply noretry settingFelix Kuehling7-15/+18
Apply the same setting to SH_MEM_CONFIG and VM_CONTEXT1_CNTL. This makes the noretry param no longer KFD-specific. On GFX10 I'm not changing SH_MEM_CONFIG in this commit because GFX10 has different retry behaviour in the SQ and I don't have a way to test it at the moment. Suggested-by: Christian König <[email protected]> CC: Philip Yang <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by : Shaoyun.liu < [email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds185-1857/+27001
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-07-12drm/amdgpu: support key database loading for navi10Hawking Zhang5-1/+70
Starting from navi10, driver should send Key Database Load command to bootloader before loading sys_drv and sos Signed-off-by: John Clements <[email protected]> Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Xiaojie Yuan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-12drm/amdgpu: switch to macro for psp bootloader commandHawking Zhang3-4/+10
The command will be sent to psp bootloader from driver to ask psp bootloader to exerise tOS, sys_drv and kdb loading Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-11drm/amdgpu: enable IP discovery by default on naviAlex Deucher1-1/+2
Use the IP discovery table rather than hardcoding the settings in the driver. Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-11drm/amdgpu/discovery: fix DCE_HWIP mapping error in hw_id_map arraytiancyin1-1/+1
ID of DCE_HWIP from vbios is DMU_HWID, mismatch cause null pointer crash in navi10 modprobe. Reviewed-by: Feifei Xu <[email protected]> Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: tiancyin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-11drm/amdgpu: Fix potential integer overflowsFelix Kuehling1-4/+5
With mm_nodes larger than 4GB, byte_count in amdgpu_fill_buffer would overflow. Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-09drm/amdgpu/psp: add a mutex to protect access to the psp ringAlex Deucher3-2/+16
We need to serialize access to the psp ring if there are multiple callers at runtime. Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-09drm/amdgpu: properly guard the generic discovery codeAlex Deucher1-2/+2
It's only available on navi and newer. Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-09drm/amdgpu: add missing documentation on new module parametersAlex Deucher1-0/+13
New parameters added for navi lack documentation. Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-09drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writebackMarek Olšák1-5/+1
This RELEASE_MEM use has the Release semantic, which means we should write back but not invalidate. Invalidations only make sense with the Acquire semantic (ACQUIRE_MEM), or when RELEASE_MEM is used to do the combined Acquire-Release semantic, which is a barrier, not a fence. The undesirable side effect of doing invalidations for the Release semantic is that it invalidates caches while shaders are running, because the Release can execute in the middle of the next IB. UMDs should use ACQUIRE_MEM at the beginning of IBs. Doing cache invalidations for a fence (like in this case) doesn't do anything for correctness. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-08drm/amdgpu/psp11: simplify the ucode register logicAlex Deucher1-2/+2
Split it between navi10 and newer and everything before navi10. Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-08drm/amdgpu: properly guard DC support in navi codeAlex Deucher1-0/+4
Need to add appropriate ifdef. Acked-by: Leo Li <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-08amdgpu: make pmu support optionalArnd Bergmann2-3/+7
When CONFIG_PERF_EVENTS is disabled, we cannot compile the pmu portion of the amdgpu driver: drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:48:38: error: no member named 'hw' in 'struct perf_event' struct hw_perf_event *hwc = &event->hw; ~~~~~ ^ drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:51:13: error: no member named 'attr' in 'struct perf_event' if (event->attr.type != event->pmu->type) ~~~~~ ^ ... Use conditional compilation for this file. Fixes: 9c7c85f7ea1f ("drm/amdgpu: add pmu counters") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-08drm/amdgpu/mes10.1: Fix header guardNathan Chancellor1-1/+1
clang warns: In file included from drivers/gpu/drm/amd/amdgpu/nv.c:53: drivers/gpu/drm/amd/amdgpu/../amdgpu/mes_v10_1.h:24:9: warning: '__MES_V10_1_H__' is used as a header guard here, followed by #define of a different macro [-Wheader-guard] #ifndef __MES_V10_1_H__ ^~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../amdgpu/mes_v10_1.h:25:9: note: '__MES_v10_1_H__' is defined here; did you mean '__MES_V10_1_H__'? #define __MES_v10_1_H__ ^~~~~~~~~~~~~~~ __MES_V10_1_H__ 1 warning generated. Capitalize the V. Fixes: 886f82aa7a1d ("drm/amdgpu/mes10.1: add ip block mes10.1 (v2)") Link: https://github.com/ClangBuiltLinux/linux/issues/582 Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.