aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu
AgeCommit message (Collapse)AuthorFilesLines
2019-12-02drm/amdgpu/sriov: No need the event 3 and 4 nowEmily Deng1-2/+0
As will call unload kms when initialize fail, and the unload kms will send event 3 and 4, so don't need event 3 and 4 in device init. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu: Added ASIC specific checks in gfxhub V1.1 get XGMI infoJohn Clements1-2/+17
Added max hive/node info checks per supported ASIC Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amd/display: Load TA firmware for navi10/12/14Bhawanpreet Lakha1-0/+25
load the ta firmware for navi10/12/14. This is already being done for raven/picasso and is needed for supporting hdcp on navi Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu: not remove sysfs if not create sysfsYintian Tao2-4/+15
When load amdgpu failed before create pm_sysfs and ucode_sysfs, the pm_sysfs and ucode_sysfs should not be removed. Otherwise, there will be warning call trace just like below. [ 24.836386] [drm] VCE initialized successfully. [ 24.841352] amdgpu 0000:00:07.0: amdgpu_device_ip_init failed [ 25.370383] amdgpu 0000:00:07.0: Fatal error during GPU init [ 25.889575] [drm] amdgpu: finishing device. [ 26.069128] amdgpu 0000:00:07.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110) [ 26.070110] [drm:gfx_v9_0_hw_fini [amdgpu]] *ERROR* KCQ disable failed [ 26.200309] [TTM] Finalizing pool allocator [ 26.200314] [TTM] Finalizing DMA pool allocator [ 26.200349] [TTM] Zone kernel: Used memory at exit: 0 KiB [ 26.200351] [TTM] Zone dma32: Used memory at exit: 0 KiB [ 26.200353] [drm] amdgpu: ttm finalized [ 26.205329] ------------[ cut here ]------------ [ 26.205330] sysfs group 'fw_version' not found for kobject '0000:00:07.0' [ 26.205347] WARNING: CPU: 0 PID: 1228 at fs/sysfs/group.c:256 sysfs_remove_group+0x80/0x90 [ 26.205348] Modules linked in: amdgpu(OE+) gpu_sched(OE) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache binfmt_misc snd_hda_codec_generic ledtrig_audio crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hda_core snd_hwdep snd_pcm snd_timer input_leds snd joydev soundcore serio_raw pcspkr evbug aesni_intel aes_x86_64 crypto_simd cryptd mac_hid glue_helper sunrpc ip_tables x_tables autofs4 8139too psmouse 8139cp mii i2c_piix4 pata_acpi floppy [ 26.205369] CPU: 0 PID: 1228 Comm: modprobe Tainted: G OE 5.2.0-rc1 #1 [ 26.205370] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 26.205372] RIP: 0010:sysfs_remove_group+0x80/0x90 [ 26.205374] Code: e8 35 b9 ff ff 5b 41 5c 41 5d 5d c3 48 89 df e8 f6 b5 ff ff eb c6 49 8b 55 00 49 8b 34 24 48 c7 c7 48 7a 70 98 e8 60 63 d3 ff <0f> 0b eb d7 66 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 [ 26.205375] RSP: 0018:ffffbee242b0b908 EFLAGS: 00010282 [ 26.205376] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 [ 26.205377] RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff97ad6f817380 [ 26.205377] RBP: ffffbee242b0b920 R08: ffffffff98f520c4 R09: 00000000000002b3 [ 26.205378] R10: ffffbee242b0b8f8 R11: 00000000000002b3 R12: ffffffffc0e58240 [ 26.205379] R13: ffff97ad6d1fe0b0 R14: ffff97ad4db954c8 R15: ffff97ad4db7fff0 [ 26.205380] FS: 00007ff3d8a1c4c0(0000) GS:ffff97ad6f800000(0000) knlGS:0000000000000000 [ 26.205381] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.205381] CR2: 00007f9b2ef1df04 CR3: 000000042aab8001 CR4: 00000000003606f0 [ 26.205384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 26.205385] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 26.205385] Call Trace: [ 26.205461] amdgpu_ucode_sysfs_fini+0x18/0x20 [amdgpu] [ 26.205518] amdgpu_device_fini+0x3b4/0x560 [amdgpu] [ 26.205573] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [ 26.205623] amdgpu_driver_load_kms+0xcd/0x250 [amdgpu] [ 26.205637] drm_dev_register+0x12b/0x1c0 [drm] [ 26.205695] amdgpu_pci_probe+0x12a/0x1e0 [amdgpu] [ 26.205699] local_pci_probe+0x47/0xa0 [ 26.205701] pci_device_probe+0x106/0x1b0 [ 26.205704] really_probe+0x21a/0x3f0 [ 26.205706] driver_probe_device+0x11c/0x140 [ 26.205707] device_driver_attach+0x58/0x60 [ 26.205709] __driver_attach+0xc3/0x140 Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu: fix GFX10 missing CSIB set(v3)Monk Liu1-28/+5
still need to init csb even for SRIOV v2: drop init_pg() for gfx10 at all since PG and GFX off feature will be fully controled by RLC and SMU fw for gfx10 v3: drop the flush_gpu_tlb lines since we consider it is only usefull in emulation Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu: should stop GFX ring in hw_finiMonk Liu1-1/+1
To align with the scheme from gfx9 disabling GFX ring after VM shutdown could avoid garbage data be fetched to GFX RB which may lead to unnecessary screw up on GFX Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu: do autoload right after MEC loaded for SRIOV VFMonk Liu1-2/+2
since we don't have RLCG ucode loading and no SRlist as well Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu: skip rlc ucode loading for SRIOV gfx10Monk Liu1-39/+41
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu: fix calltrace during kmd unload(v3)Monk Liu5-144/+6
issue: kernel would report a warning from a double unpin during the driver unloading on the CSB bo why: we unpin it during hw_fini, and there will be another unpin in sw_fini on CSB bo. fix: actually we don't need to pin/unpin it during hw_init/fini since it is created with kernel pinned, we only need to fullfill the CSB again during hw_init to prevent CSB/VRAM lost after S3 v2: get_csb in init_rlc so hw_init() will make CSIB content back even after reset or s3 v3: use bo_create_kernel instead of bo_create_reserved for CSB otherwise the bo_free_kernel() on CSB is not aligned and would lead to its internal reserve pending there forever take care of gfx7/8 as well Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu: use CPU to flush vmhub if sched stoppedMonk Liu1-1/+2
otherwse the flush_gpu_tlb will hang if we unload the KMD becuase the schedulers already stopped Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu/gfx: Increase dispatch packet numberJames Zhu1-2/+2
For Arcturus, increase dispatch packet number to stress scheduler. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu/gfx: Clear more EDC cntJames Zhu1-0/+5
Clear SDMA and HDP EDC counter in GPR workarounds. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu/gfx10: remove outdated commentsXiaojie Yuan1-3/+0
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amdgpu/gfx10: unlock srbm_mutex after queue programming finishXiaojie Yuan1-2/+3
srbm_mutex is to guarantee atomicity for r/w of gfx indexed registers Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-26drm/amdgpu: Fix a bug in jpeg_v1_0_start()Dan Carpenter1-1/+2
Originally the last WREG32_SOC15() was a part of the if statement block but the curly braces are on the wrong line. Fixes: bb0db70f3f75 ("drm/amdgpu: separate JPEG1.0 code out from VCN1.0") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-26drm/amdgpu: flag vram lost on baco reset for VI/CIKAlex Deucher2-4/+10
VI/CIK BACO was inflight when this fix landed for SOC15/NV. Add the fix to VI/CIK as well. Acked-by: Evan Quan <evan.quan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-26drm/amdgpu: move pci handling out of pm opsAlex Deucher3-29/+24
The documentation says the that PCI core handles this for you unless you choose to implement it. Just rely on the PCI core to handle the pci specific bits. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-26drm/amdgpu: apply gpr/gds workaround before enabling GFX EDC modeHawking Zhang1-4/+4
gfx memory should be initialized before enabling DED and FUE field in mmGB_EDC_MODE Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-26drm/amd/amdgpu/sriov skip jpeg ip block for ARCTURUS VFJack Zhang1-1/+2
Currently ARCTURUS VF doesn't support jpeg ip block. Skip jpeg ip block in case guest driver load fail. Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by: Zhexi Zhang <zhexi.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-26drm/amdgpu: Optimize KFD page table reservationFelix Kuehling1-1/+14
Be less pessimistic about estimated page table use for KFD. Most allocations use 2MB pages and therefore need less VRAM for page tables. This allows more VRAM to be used for applications especially on large systems with many GPUs and hundreds of GB of system memory. Example: 8 GPUs with 32GB VRAM each + 256GB system memory = 512GB Old page table reservation per GPU: 1GB New page table reservation per GPU: 32MB Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: xinhui pan <xinhui.pan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-26drm/amdgpu: Raise KFD unpinned system memory limitFelix Kuehling1-2/+2
Allow KFD applications to use more unpinned system memory through HMM. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-26drm/amdgpu: Ensure ret is always initialized when using SOC15_WAIT_ON_RREGNathan Chancellor1-0/+1
Commit b0f3cd3191cd ("drm/amdgpu: remove unnecessary JPEG2.0 code from VCN2.0") introduced a new clang warning in the vcn_v2_0_stop function: ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: warning: variable 'r' is used uninitialized whenever 'while' loop exits because its condition is false [-Wsometimes-uninitialized] SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note: expanded from macro 'SOC15_WAIT_ON_RREG' while ((tmp_ & (mask)) != (expected_value)) { \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1083:6: note: uninitialized use occurs here if (r) ^ ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: note: remove the condition if it is always true SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r); ^ ../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note: expanded from macro 'SOC15_WAIT_ON_RREG' while ((tmp_ & (mask)) != (expected_value)) { \ ^ ../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1072:7: note: initialize the variable 'r' to silence this warning int r; ^ = 0 1 warning generated. To prevent warnings like this from happening in the future, make the SOC15_WAIT_ON_RREG macro initialize its ret variable before the while loop that can time out. This macro's return value is always checked so it should set ret in both the success and fail path. Link: https://github.com/ClangBuiltLinux/linux/issues/776 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-25drm/amdgpu: Resolved offchip EEPROM I/O issueJohn Clements2-5/+13
Updated target I2C address Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-25drm/amdgpu: Apply noretry setting for mmhub9.4Oak Zeng1-2/+3
Config the translation retry behavior according to noretry kernel parameter Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Suggested-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: Use ARRAY_SIZE for sos_old_versionszhengbin1-1/+1
Fixes coccicheck warning: drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:182:40-41: WARNING: Use ARRAY_SIZE Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10changzhu3-2/+116
It may lose gpuvm invalidate acknowldege state across power-gating off cycle. To avoid this issue in gmc9/gmc10 invalidation, add semaphore acquire before invalidation and semaphore release after invalidation. After adding semaphore acquire before invalidation, the semaphore register become read-only if another process try to acquire semaphore. Then it will not be able to release this semaphore. Then it may cause deadlock problem. If this deadlock problem happens, it needs a semaphore firmware fix. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhubchangzhu6-0/+13
SW must acquire/release one of the vm_invalidate_eng*_sem around the invalidation req/ack. Through this way,it can avoid losing invalidate acknowledge state across power-gating off cycle. To use vm_invalidate_eng*_sem, it needs to initialize vm_invalidate_eng*_sem firstly. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF.Jack Zhang1-1/+4
After rlcg fw 2.1, kmd driver starts to load extra fw for LIST_CNTL,GPM_MEM,SRM_MEM. We needs to skip the three fw because all rlcg related fw have been loaded by host driver. Guest driver would load the three fw fail without this change. Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VFJack Zhang1-0/+36
Temporarily skip ras,dtm,hdcp initialize and terminate for arcturus VF Currently the three features haven't been enabled at SRIOV, it would trigger guest driver load fail with the bare-metal path of the three features. Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu/gfx10: re-init clear state buffer after gpu resetXiaojie Yuan1-6/+37
This patch fixes 2nd baco reset failure with gfxoff enabled on navi1x. clear state buffer (resides in vram) is corrupted after 1st baco reset, upon gfxoff exit, CPF gets garbage header in CSIB and hangs. Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22merge fix for "ftrace: Rework event_create_dir()"Stephen Rothwell1-1/+1
Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: remove redundant assignment to pointer write_frameColin Ian King1-1/+1
The pointer write_frame is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: simplify runtime suspendAlex Deucher1-13/+22
In the standard _PR3 case, the pci core handles the pci state. The driver only needs to handle it in the legacy ATPX case. This may fix issues with runtime suspend/resume on certain hybrid graphics laptops. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: Update Arcturus golden registersJay Cornwall1-0/+1
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: implement querying ras error count for mmhub9.4Dennis Li3-1/+257
Get mmhub error counter by accessing EDC_CNT registers. v2: Add mmhub_v9_4_ prefix for local static variable and function Signed-off-by: Dennis Li <dennis.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: refine query function of mmhub EDC counter in vg20Dennis Li1-52/+180
Add codes to print the detail EDC info for the subblock of mmhub v2: Move the EDC_CNT registers' defintion from mmhub_9_4 header files to mmhub_1_0 ones. Add mmhub_v1_0_ prefix for the local static variable and function. v3: squash in DC fix Signed-off-by: Dennis Li <dennis.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: define soc15_ras_field_entry for reuseDennis Li2-23/+23
The struct soc15_ras_field_entry will be reused by other IPs, such as mmhub and gc v2: rename ras_subblock_regs to gc_ras_fields_vg20, because the future asic maybe have a different table. Signed-off-by: Dennis Li <dennis.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu/gfx10: fix out-of-bound mqd_backup array accessXiaojie Yuan1-2/+0
Fixes: 0bb419c76b3150 ("drm/amdgpu/gfx10: fix mqd backup/restore for gfx rings (v2)") Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhaltXiaojie Yuan1-2/+12
50us is not enough to wait for cp ready after gpu reset on some navi asics. Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Suggested-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22amd/amdgpu: force to trigger a no-retry-fault after a retry-faultAlex Sierra1-1/+10
Only for the debugger use case. [why] Avoid endless translation retries, after an invalid address access has been issued to the GPU. Instead, the trap handler is forced to enter by generating a no-retry-fault. A s_trap instruction is inserted in the debugger case to let the wave to enter trap handler to save context. [how] Intentionally using an invalid flag combination (F and P set at the same time) to trigger a no-retry-fault, after a retry-fault happens. This is only valid under compute context. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu: add flag to indicate amdgpu vm contextAlex Sierra2-0/+5
Flag added to indicate if the amdgpu vm context is used for compute or graphics. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: enable runtime pm on BACO capable boards if runpm=1Alex Deucher1-4/+7
BACO - Bus Active, Chip Off Everything is in place now. Not enabled by default yet. You still have to specify runpm=1. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: disentangle runtime pm and vga_switcherooAlex Deucher1-8/+14
Originally we only supported runtime pm on PX/HG laptops so vga_switcheroo and runtime pm are sort of entangled. Attempt to logically separate them. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: start to disentangle boco from runtime pmAlex Deucher3-8/+16
BACO - Bus Active, Chip Off BOCO - Bus Off, Chip Off We originally only supported runtime pm on PX/HG laptops so most of the runtime pm code looks for this. Add a new flag to check for runtime pm enablement and use this rather than checking for PX/HG. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: add baco support to runtime suspend/resumeAlex Deucher1-1/+6
BACO - Bus Active, Chip Off This adds the necessary support to the runtime suspend and resume functions to handle boards that support baco. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: add helpers for baco entry and exitAlex Deucher2-0/+63
BACO - Bus Active, Chip Off Will be used for runtime pm. Entry will enter the BACO state (chip off). Exit will exit the BACO state (chip on). Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: split swSMU baco_reset into enter and exitAlex Deucher2-3/+14
BACO - Bus Active, Chip Off So we can use it for power savings rather than just reset. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: add additional boco checks to runtime suspend/resume (v2)Alex Deucher1-21/+26
BACO - Bus Active, Chip Off BOCO - Bus Off, Chip Off We will take slightly different paths for boco and baco. v2: fold together two consecutive if clauses Reviewed-by: Evan Quan <evan.quan@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: rename amdgpu_device_is_px to amdgpu_device_supports_boco (v2)Alex Deucher4-12/+12
BACO - Bus Active, Chip Off BOCO - Bus Off, Chip Off To better match what we are checking for and to align with amdgpu_device_supports_baco. BOCO is used on PowerXpress/Hybrid Graphics systems and BACO is used on desktop dGPU boards. v2: fix typo in documentation Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amdgpu: add a amdgpu_device_supports_baco helperAlex Deucher2-0/+16
BACO - Bus Active, Chip Off To check if a device supports BACO or not. This will be used in determining when to enable runtime pm. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Powered by cgit, Gruvboxed by Blaster4385.