Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix this warning by adding 'ring' arguments to kdoc.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1128: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
Cc: Felix Kuehling <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
We want to do -Werror builds on our CI. However, non-amdgpu breakages
have prevented us from doing so thus far. Also, there are a number of
additional checks that we should enable, that the community cares about
and are hidden behind -Wextra. So, define DRM_AMDGPU_WERROR to only
enable -Werror for the amdgpu kernel module and enable -Wextra while
disabling all of the checks that are too noisy.
Cc: Alex Deucher <[email protected]>
Cc: Kenny Ho <[email protected]>
Suggested-by: Jani Nikula <[email protected]>
Reviewed-by: Kenny Ho <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
commit cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support") showed
improvements to power consumption over suspend when s0ix wasn't enabled in
BIOS and the system didn't support S3.
This patch however was misguided because the reason the system didn't
support S3 was because SMT was disabled in OEM BIOS setup.
This prevented the BIOS from allowing S3.
Also allowing GPUs to use the s2idle path actually causes problems if
they're invoked on systems that may not support s2idle in the platform
firmware. `systemd` has a tendency to try to use `s2idle` if `deep` fails
for any reason, which could lead to unexpected flows.
The original commit also fixed a problem during resume from suspend to idle
without hardware support, but this is no longer necessary with commit
ca4751866397 ("drm/amd: Don't allow s0ix on APUs older than Raven")
Revert commit cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support")
to make it match the expected behavior again.
Cc: Rafael Ávila de Espíndola <[email protected]>
Link: https://github.com/torvalds/linux/blob/v6.1/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c#L1060
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2599
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Set finished fence to ETIME error if job timedout.
Signed-off-by: ZhenGuo Yin <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
amdgpu_amdkfd_reserve_mem_limit
Fix these warnings by adding 'xcp_id' argument.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:160: warning: Function parameter or member 'xcp_id' not described in 'amdgpu_amdkfd_reserve_mem_limit'
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v10, v11.c
Fix these warnings by adding 'inst' arguments to kdocs.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:428: warning: Function parameter or member 'inst' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:626: warning: Function parameter or member 'inst' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c:423: warning: Function parameter or member 'inst' not described in 'gmc_v10_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c:328: warning: Function parameter or member 'inst' not described in 'gmc_v11_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:950: warning: Function parameter or member 'inst' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Hawking Zhang <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
kgd_gfx_v9_get_cu_occupancy()
Fix these warnings by adding 'inst' arguments to kdocs.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:692: warning: Function parameter or member 'inst' not described in 'get_wave_count'
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:763: warning: Function parameter or member 'inst' not described in 'kgd_gfx_v9_get_cu_occupancy'
Cc: Felix Kuehling <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix these warnings by adding 'xcc_id' arguments.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1557: warning: Function parameter or member 'xcc_id' not described in 'gfx_v7_0_select_se_sh'
drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:38: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_enter_safe_mode'
drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:62: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_exit_safe_mode'
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For ASICs which are not initialized through discovery, initialize GFX
cluster as 1.
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:292: warning: Cannot understand * @create_dmamap_sg_bo: Creates a amdgpu_bo object to reflect information
Cc: Felix Kuehling <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Address a bunch of kdoc warnings:
gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'job' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'flags' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:946: warning: Function parameter or member 'timeout' not described in 'sdma_v6_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1125: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'vmid' not described in 'sdma_v6_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'pd_addr' not described in 'sdma_v6_0_ring_emit_vm_flush'
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix these warnings by adding & deleting the deviant arguments.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:906: warning: Function parameter or member 'numa_info' not described in 'amdgpu_acpi_get_node_id'
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:906: warning: Excess function parameter 'nid' description in 'amdgpu_acpi_get_node_id'
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Address a bunch of kdoc warnings:
gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:426: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_gfx_stop'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:457: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_rlc_stop'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:470: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_page_stop'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:506: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_ctx_switch_enable'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:794: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_rlc_resume'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:810: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_load_microcode'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:854: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_start'
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add IP GC 11.0.1 in the list of target to have
tmz enabled by default.
Signed-off-by: Ikshwaku Chauhan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This can clean up all irq warnings because of unbalanced
amdgpu_irq_get/put when unplugging/unbinding device, and leave
irq count decrease in each ip fini function.
Signed-off-by: Guchun Chen <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There are two bugs here.
1) Drop the lock if copy_from_user() fails.
2) If the copy fails then the correct error code is -EFAULT instead of
-EINVAL.
I also broke up the long line and changed "sizeof rd->id" to
"sizeof(rd->id)".
Fixes: 553f973a0d7b ("drm/amd/amdgpu: Update debugfs for XCC support (v3)")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use amdxcp platform device as spatial partition device.
-v2: remove unused variable
Signed-off-by: James Zhu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Silencing the compiler from below compilation error:
drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c:704:23: error: variable 'mmhub_v1_8_mmea_err_status_reg' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static const uint32_t mmhub_v1_8_mmea_err_status_reg[] = {
^
1 error generated.
Mark the variable as __maybe_unused to make it clear to clang that this
is expected, so there is no more warning.
Cc: Christian König <[email protected]>
Cc: Lijo Lazar <[email protected]>
Cc: Luben Tuikov <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v2: add the base class id for accelerator (lijo)
v3: add the new pci class in amdgpu tree (hawking)
Signed-off-by: Shiwu Zhang <[email protected]>
Acked-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Redirect xcp allocated drm_device::rdev/pdev/driver with
amdgpu pci_device/drm_device setting. They need be saved
before redirect and restored after unregister xcp drm_device.
-v2: fix warning discarded-qualifiers
Signed-off-by: James Zhu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Since currently APU and dGPU share the same pcie class
while gmc init needs the flag to set up correctly for upcomming
memory allocations
v2: call get_pkg_type in smuio 13_0_3 is enough (hawking)
Signed-off-by: Shiwu Zhang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Need init new num_jpeg_rings to 1 on jpeg.
Signed-off-by: James Zhu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Richard Liang <[email protected]>
Tested-by: Ying Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Shiwu Zhang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Suggested by FW team that GB_ADDR_CONFIG is handled by golden
settings in driver to get the expected value
Signed-off-by: Shiwu Zhang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Since bios reading does not work currently so just bypass all operations
related to bios
v2: hardcode the vram info for APP_APU case (hawking)
v3: correct the vram_width with channel number * channel size (lijo)
Signed-off-by: Shiwu Zhang <[email protected]>
Reviewed-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It is firmware requirement to set gds_backup_addrlo and gds_backup_addrhi
of DE meta both zero if no gds partition is allocated for the frame.
Signed-off-by: Jiadong Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When MEC executes unmap_queue for mid command buffer preemption, it will
kick the write pointer of the gfx ring, set CP_VMID_PREEMPT to trigger the
preemption and wait for CP_VMID_PREEMPT becomes zero after the preemption
done. There is a race condition that PFP may excute the resetting command
before MEC set CP_VMID_PREEMPT. As a result, hang happens as
CP_VMID_PREEMPT is always 0xffff.
To avoid this, we send resetting CP_VMID_PREEMPT command after the trailing
fence is siganled and update gfx write pointer explicitly.
Signed-off-by: Jiadong Zhu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_disable_kcq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:497:6: warning: variable ‘j’ set but not used [-Wunused-but-set-variable]
497 | int j;
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_disable_kgq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:528:6: warning: variable ‘j’ set but not used [-Wunused-but-set-variable]
528 | int j;
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_enable_kgq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:630:12: warning: variable ‘j’ set but not used [-Wunused-but-set-variable]
630 | int r, i, j;
|
Cc: Alex Deucher <[email protected]>
Cc: Christian König <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
gcc with W=1
In file included from drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:33:
drivers/gpu/drm/amd/amdgpu/clearstate_gfx9.h:939:36: warning: ‘gfx9_cs_data’ defined but not used [-Wunused-const-variable=]
939 | static const struct cs_section_def gfx9_cs_data[] = {
|
gfx9_cs_data is not used in gfx_v9_4_3.c, hence remove its
include in gfx_v9_4_3.c
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When building with clang's -Wincompatible-function-pointer-types-strict,
which ensures that function pointer signatures match exactly to avoid
tripping clang's Control Flow Integrity (kCFI) checks at run time and
will eventually be turned on for the kernel, the following instances
appear in the NBIOv7.9 code:
drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c:465:32: error: incompatible function pointer types initializing 'int (*)(struct amdgpu_device *)' with an expression of type 'enum amdgpu_gfx_partition (struct amdgpu_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.get_compute_partition_mode = nbio_v7_9_get_compute_partition_mode,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c:467:31: error: incompatible function pointer types initializing 'u32 (*)(struct amdgpu_device *, u32 *)' (aka 'unsigned int (*)(struct amdgpu_device *, unsigned int *)') with an expression of type 'enum amdgpu_memory_partition (struct amdgpu_device *, u32 *)' (aka 'enum amdgpu_memory_partition (struct amdgpu_device *, unsigned int *)') [-Werror,-Wincompatible-function-pointer-types-strict]
.get_memory_partition_mode = nbio_v7_9_get_memory_partition_mode,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.
Change the return types of these callbacks to match the prototypes to
clear up the warning and avoid tripping kCFI at run time. Both functions
return a value from ffs(), which is an integer that can fit into either
int or unsigned int.
Fixes: 98a54e88e87f ("drm/amdgpu: add sysfs node for compute partition mode")
Fixes: ea2d2f8ececd ("drm/amdgpu: detect current GPU memory partition mode")
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v1: Only single copy per instance type is required for PSP. All instance types
use the same firmware copy. (Lijo)
v2: Apply the change into amdgpu_sdma_init_microcode() due to rebase. (Morris)
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Shiwu Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This will simplify code.
Signed-off-by: Guchun Chen <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
sched.ready is nothing with ring initialization, it needs to set
to be true after ring/IB test in amdgpu_ring_test_helper to tell
the ring is ready for submission.
Signed-off-by: Guchun Chen <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
sched.ready is nothing with ring initialization, it needs to set
to be true after ring/IB test in amdgpu_ring_test_helper to tell
the ring is ready for submission.
Signed-off-by: Guchun Chen <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix warnings reported by kernel test bot/smatch
smatch warnings:
drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.c:65 amdgpu_xcp_run_transition()
error: buffer overflow 'xcp_mgr->xcp' 8 <= 8
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
checkpatch reports:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for any arm of this statement
+ if (nvec <= 0) {
[...]
+ } else {
[...]
WARNING: Block comments use a trailing */ on a separate line
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add a low priority DRM scheduler for VRAM clearing instead of using
the exisiting high priority scheduler. Use the high priority scheduler
for migrations and evictions.
Signed-off-by: Mukul Joshi <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
No functional modification involved.
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:374: warning: expecting prototype for vcn_v4_0_mc_resume_dpg_mode(). Prototype was for vcn_v4_0_3_mc_resume_dpg_mode() instead.
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:631: warning: expecting prototype for vcn_v4_0_enable_clock_gating(). Prototype was for vcn_v4_0_3_enable_clock_gating() instead.
Reported-by: Abaci Robot <[email protected]>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5284
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
No functional modification involved.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:426: warning: expecting prototype for sdma_v4_4_2_gfx_stop(). Prototype was for sdma_v4_4_2_inst_gfx_stop() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:457: warning: expecting prototype for sdma_v4_4_2_rlc_stop(). Prototype was for sdma_v4_4_2_inst_rlc_stop() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:470: warning: expecting prototype for sdma_v4_4_2_page_stop(). Prototype was for sdma_v4_4_2_inst_page_stop() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:506: warning: expecting prototype for sdma_v4_4_2_ctx_switch_enable(). Prototype was for sdma_v4_4_2_inst_ctx_switch_enable() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:561: warning: expecting prototype for sdma_v4_4_2_enable(). Prototype was for sdma_v4_4_2_inst_enable() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:798: warning: expecting prototype for sdma_v4_4_2_rlc_resume(). Prototype was for sdma_v4_4_2_inst_rlc_resume() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:814: warning: expecting prototype for sdma_v4_4_2_load_microcode(). Prototype was for sdma_v4_4_2_inst_load_microcode() instead.
Reported-by: Abaci Robot <[email protected]>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5283
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
./drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: amdgpu_xcp.h is included more than once.
Reported-by: Abaci Robot <[email protected]>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5281
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The compute partition memory size calculated from KFD_XCP_MEMORY_SIZE
may not align to page size if xcp_mgr->num_xcp_per_mem_partition is 6.
Change the KFD_XCP_MEMORY_SIZE macro to return page align size, so KFD
node memory size reported in sysfs is page align size, to avoid
application VRAM allocation failure because application may use the size
directly and Thunk requires the memory allocation size is page size
align.
Signed-off-by: Philip Yang <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
gcc with W=1 reports
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:2138:13: error: variable
‘num_xcc’ set but not used [-Werror=unused-but-set-variable]
2138 | int num_xcc;
| ^~~~~~~
This variable is not used so remove it.
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Two newly introduced functions are in the global namespace but have no prototypes
or callers outside of amdgpu_acpi.c, another function is static but only has
a caller inside of an #ifdef:
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:902:13: error: no previous prototype for 'amdgpu_acpi_get_node_id' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:928:30: error: no previous prototype for 'amdgpu_acpi_get_dev' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:860:33: error: 'amdgpu_acpi_get_numa_info' defined but not used [-Werror=unused-function]
Avoid the warnings by marking all of them static and ensuring that the compiler is
able to see the callsites.
v2: rebase on latest code (Alex)
Fixes: fa0497c34eb7 ("drm/amdgpu: Add API to get numa information of XCC")
Fixes: 1cc823011a23 ("drm/amdgpu: Store additional numa node information")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
DMA addresses can be shorter than u64, which results in a broken debug output:
drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c: In function 'amdgpu_gart_table_ram_alloc':
drivers/gpu/drm/amd/amdgpu/amdgpu.h:41:22: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'dma_addr_t' {aka 'unsigned int'} [-Werror=format=]
drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c:146:9: note: in expansion of macro 'dev_info'
146 | dev_info(adev->dev, "%s dma_addr:%llx\n", __func__, dma_addr);
Use the special %pad format string and pass the DMA address by reference.
Fixes: c9a502e981a9 ("drm/amdgpu: Allocate GART table in RAM for AMD APU")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
A few newly added global functions have no prototype, which causes warnings:
drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c:169:5: error: no previous prototype for 'aqua_vanjaram_select_scheds' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c:310:5: error: no previous prototype for '__aqua_vanjaram_get_xcc_per_xcp' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c:337:5: error: no previous prototype for '__aqua_vanjaram_get_xcp_ip_info' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c:593:5: error: no previous prototype for 'aqua_vanjaram_get_xcp_ip_details' [-Werror=missing-prototypes]
There are no callers from other files, so just mark them as 'static'.
Fixes: cd7d8400aa04 ("drm/amdgpu: add partition schedule for GC(9, 4, 3)")
Fixes: 9cb18287d8f1 ("drm/amdgpu: Add SOC partition funcs for GC v9.4.3")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The file was newly added and causes some -Wmissing-prototype warnings:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c:57:5: error: no previous prototype for 'kgd_gfx_v9_4_3_hqd_sdma_load' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c:126:5: error: no previous prototype for 'kgd_gfx_v9_4_3_hqd_sdma_dump' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c:163:6: error: no previous prototype for 'kgd_gfx_v9_4_3_hqd_sdma_is_occupied' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c:181:5: error: no previous prototype for 'kgd_gfx_v9_4_3_hqd_sdma_destroy' [-Werror=missing-prototypes]
Mark these all as 'static' since there are no outside callers.
Fixes: a805889a1531 ("drm/amdkfd: Update SDMA queue management for GFX9.4.3")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Smatch warns:
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:579:
unsigned 'xcc_id' is never less than zero.
gfx_v9_4_3_ih_to_xcc_inst() returns negative numbers as well.
Fix this by changing type of xcc_id to int.
Fixes: 98b2e9cad227 ("drm/amdgpu: correct the vmhub index when page fault occurs")
Signed-off-by: Harshit Mogalapalli <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There are a couple of spelling mistakes, one in a dev_info message
and the other in a dev_debug message. Fix them.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enabling nBIF interrupt history tracker prevents LCLK deep sleep,
hence disable it
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
add the the init_registers callback for nbio_v7_9
Signed-off-by: Shiwu Zhang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|