aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu
AgeCommit message (Collapse)AuthorFilesLines
2019-12-11drm/amd/powerplay: enable pp one vf mode for vega10Yintian Tao8-224/+133
Originally, due to the restriction from PSP and SMU, VF has to send message to hypervisor driver to handle powerplay change which is complicated and redundant. Currently, SMU and PSP can support VF to directly handle powerplay change by itself. Therefore, the old code about the handshake between VF and PF to handle powerplay will be removed and VF will use new the registers below to handshake with SMU. mmMP1_SMN_C2PMSG_101: register to handle SMU message mmMP1_SMN_C2PMSG_102: register to handle SMU parameter mmMP1_SMN_C2PMSG_103: register to handle SMU response v2: remove module parameter pp_one_vf v3: fix the parens v4: forbid vf to change smu feature v5: use hwmon_attributes_visible to skip sepicified hwmon atrribute v6: change skip condition at vega10_copy_table_to_smc Signed-off-by: Yintian Tao <[email protected]> Acked-by: Evan Quan <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-11drm/amdgpu: Added RAS UMC error query support for ArcturusJohn Clements3-16/+74
Updated UMC 6.1 function set to support UMC 6.1.1 and 6.1.2 devices Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-11drm/amdgpu: avoid using invalidate semaphore for picassochangzhu1-8/+20
It may cause timeout waiting for sem acquire in VM flush when using invalidate semaphore for picasso. So it needs to avoid using invalidate semaphore for piasso. Signed-off-by: changzhu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-11drm/amdgpu: add condition to enable baco for ras recoveryLe Ma1-10/+8
Switch to baco reset method for ras recovery if the PMFW supported. If not, keep the original reset method. v2: revise the condition Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-11drm/amdgpu: fix license on Kconfig and MakefilesAlex Deucher1-1/+1
amdgpu is MIT licensed. Fixes: ec8f24b7faaf3d ("treewide: Add SPDX license identifier - Makefile/Kconfig") Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-11drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin1-0/+2
add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2 Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Tianci.Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-11drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin1-0/+2
add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2 Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Tianci.Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-11drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin1-0/+1
add registers: mmSPI_CONFIG_CNTL Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Tianci.Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-11drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin1-0/+1
add registers: mmSPI_CONFIG_CNTL Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Tianci.Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-09drm/amdgpu: fix resume failures due to psp fw loading sequence change (v3)Hawking Zhang1-0/+33
this fix the regression caused by asd/ta loading sequence adjustment recently. asd/ta loading was move out from hw_start and should also be applied to psp_resume. otherwise those fw loading will be ignored in resume phase. v2: add the mutex unlock for asd loading failure case v3: merge the error handling to failed tag Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Reviewed-by: Le Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-09Revert "drm/amdgpu: enable VCN DPG on Raven and Raven2"Thong Thai1-6/+2
This reverts commit a4840d91c984f93b2acdcd44441d624bbc1af0d2. Reverting due to power efficiency issues seen on Raven 1 and 2 when DPG mode is enabled. Signed-off-by: Thong Thai <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-09drm/amdgpu: add VM eviction lock v3Christian König2-7/+36
This allows to invalidate VM entries without taking the reservation lock. v3: use -EBUSY Signed-off-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-09drm/amdgpu: stop adding VM updates fences to the resv objChristian König4-13/+42
Don't add the VM update fences to the resv object and remove the handling to stop implicitely syncing to them. Ongoing updates prevent page tables from being evicted and we manually block for all updates to complete before releasing PDs and PTS. This way we can do updates even without the resv obj locked. Signed-off-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-09drm/amdgpu: explicitely sync to VM updates v2Christian König7-40/+51
Allows us to reduce the overhead while syncing to fences a bit. v2: also drop adev parameter from the functions Signed-off-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-09drm/amdgpu: move VM eviction decision into amdgpu_vm.cChristian König3-4/+24
When a page tables needs to be evicted the VM code should decide if that is possible or not. Signed-off-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-06Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds13-229/+114
Pull more drm updates from Dave Airlie: "Rob pointed out I missed his pull request for msm-next, it's been in next for a while outside of my tree so shouldn't cause any unexpected issues, it has some OCMEM support in drivers/soc that is acked by other maintainers as it's outside my tree. Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with some tegra, omap, mgag200 and one core fix. Summary: msm-next: - OCMEM support for a3xx and a4xx GPUs. - a510 support + display support core: - mst payload deletion fix i915: - uapi alignment fix - fix for power usage regression due to security fixes - change default preemption timeout to 640ms from 100ms - EHL voltage level display fixes - TGL DGL PHY fix - gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning - CI spotted deadlock fix - EHL port D programming fix amdgpu: - VRAM lost fixes on BACO for CI/VI - navi14 DC fixes - misc SR-IOV, gfx10 fixes - XGMI fixes for arcturus - SRIOV fixes amdkfd: - KFD on ppc64le enabled - page table optimisations radeon: - fix for r1xx/2xx register checker. tegra: - displayport regression fixes - DMA API regression fixes mgag200: - fix devices that can't scanout except at 0 addr omap: - fix dma_addr refcounting" * tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits) drm/dp_mst: Correct the bug in drm_dp_update_payload_part1() drm/omap: fix dma_addr refcounting drm/tegra: Run hub cleanup on ->remove() drm/tegra: sor: Make the +5V HDMI supply optional drm/tegra: Silence expected errors on IOMMU attach drm/tegra: vic: Export module device table drm/tegra: sor: Implement system suspend/resume drm/tegra: Use proper IOVA address for cursor image drm/tegra: gem: Remove premature import restrictions drm/tegra: gem: Properly pin imported buffers drm/tegra: hub: Remove bogus connection mutex check ia64: agp: Replace empty define with do while agp: Add bridge parameter documentation agp: remove unused variable num_segments agp: move AGPGART_MINOR to include/linux/miscdevice.h agp: remove unused variable size in agp_generic_create_gatt_table drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n drm/radeon: fix r1xx/r2xx register checker for POT textures drm/amdgpu: fix GFX10 missing CSIB set(v3) drm/amdgpu: should stop GFX ring in hw_fini ...
2019-12-06drm: share address space for dma bufsGerd Hoffmann1-3/+1
Use the shared address space of the drm device (see drm_open() in drm_file.c) for dma-bufs too. That removes a difference betweem drm device mmap vmas and dma-buf mmap vmas and fixes corner cases like dropping ptes (using madvise(DONTNEED) for example) not working properly. Also remove amdgpu driver's private dmabuf update. It is not needed any more now that we are doing this for everybody. Signed-off-by: Gerd Hoffmann <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-05drm/amdgpu: add cache flush workaround to gfx8 emit_fencePierre-Eric Pelloux-Prayer1-3/+19
The same workaround is used for gfx7. Both PAL and Mesa use it for gfx8 too, so port this commit to gfx_v8_0_ring_emit_fence_gfx. Signed-off-by: Pierre-Eric Pelloux-Prayer <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: add check before enabling/disabling broadcast modeGuchun Chen1-16/+22
When security violation from new vbios happens, data fabric is risky to stop working. So prevent the direct access to DF mmFabricConfigAccessControl from the new vbios and onwards. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: reduce redundant uvd context lost warning messageLe Ma1-4/+7
Move the print out of uvd instance loop in amdgpu_uvd_suspend v2: drop unnecessary brackets v3: grab ras_intr state once for multiple times use Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: clear err_event_athub flag after reset exitLe Ma2-0/+8
Otherwise next err_event_athub error cannot call gpu reset. And following resume sequence will not be affected by this flag. v2: create function to clear amdgpu_ras_in_intr for modularity of ras driver Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: support full gpu reset workflow when ras err_event_athub occursLe Ma1-6/+11
This athub fatal error can be recovered by baco without system-level reboot, so add a mode to use baco for the recovery. Not affect the default psp reset situations for now. Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: add concurrent baco reset support for XGMILe Ma2-12/+72
Currently each XGMI node reset wq does not run in parrallel if bound to same cpu. Make change to bound the xgmi_reset_work item to different cpus. XGMI requires all nodes enter into baco within very close proximity before any node exit baco. So schedule the xgmi_reset_work wq twice for enter/exit baco respectively. To use baco for XGMI, PMFW supported for baco on XGMI needs to be involved. The case that PSP reset and baco reset coexist within an XGMI hive never exist and is not in the consideration. v2: define use_baco flag to simplify the code for xgmi baco sequence Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: enable/disable doorbell interrupt in baco entry/exit helperLe Ma1-7/+12
This operation is needed when baco entry/exit for ras recovery Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: clear uncorrectable parity error status bitLe Ma1-1/+9
This should be cleared during every nbif uncorrectable error cleanup work. Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: clear ras controller status registers when interrupt occursLe Ma1-0/+10
To fix issue that ras controller interrupt cannot be triggered anymore after one time nbif uncorrectable error. And error count is stored in nbif ras object for query. Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: export amdgpu_ras_find_obj to use externallyLe Ma2-4/+4
Change it to external interface. Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: remove ras global recovery handling from ras_controller_int handlerLe Ma1-1/+6
v2: add notification when ras controller interrupt generates Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: add cache flush workaround to gfx8 emit_fencePierre-Eric Pelloux-Prayer1-3/+19
The same workaround is used for gfx7. Both PAL and Mesa use it for gfx8 too, so port this commit to gfx_v8_0_ring_emit_fence_gfx. Signed-off-by: Pierre-Eric Pelloux-Prayer <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu/gfx: Improvement on EDC GPR workaroundsJames Zhu1-20/+63
SPI limits total CS waves in flight per SE to no more than 32 * num_cu and we need to stuff 40 waves on a CU to completely clean the SGPR. This is accomplished in the WR by cleaning the SE in two steps, half of the CU per step. Signed-off-by: James Zhu <[email protected]> Reviewed-by: Yong Zhao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm/amdgpu: add check before enabling/disabling broadcast modeGuchun Chen1-16/+22
When security violation from new vbios happens, data fabric is risky to stop working. So prevent the direct access to DF mmFabricConfigAccessControl from the new vbios and onwards. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-05drm: constify fb ops across all driversJani Nikula1-1/+1
Now that the fbops member of struct fb_info is const, we can start making the ops const as well. Cc: [email protected] Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/59b43629ac60031c5bbf961d8c49695019bc9c6f.1575390740.git.jani.nikula@intel.com
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds2-71/+121
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-03drm/amdgpu: fix GFX10 missing CSIB set(v3)Monk Liu1-28/+5
still need to init csb even for SRIOV v2: drop init_pg() for gfx10 at all since PG and GFX off feature will be fully controled by RLC and SMU fw for gfx10 v3: drop the flush_gpu_tlb lines since we consider it is only usefull in emulation Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu: should stop GFX ring in hw_finiMonk Liu1-1/+1
To align with the scheme from gfx9 disabling GFX ring after VM shutdown could avoid garbage data be fetched to GFX RB which may lead to unnecessary screw up on GFX Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu: do autoload right after MEC loaded for SRIOV VFMonk Liu1-2/+2
since we don't have RLCG ucode loading and no SRlist as well Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu: skip rlc ucode loading for SRIOV gfx10Monk Liu1-39/+41
Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu: fix calltrace during kmd unload(v3)Monk Liu5-144/+6
issue: kernel would report a warning from a double unpin during the driver unloading on the CSB bo why: we unpin it during hw_fini, and there will be another unpin in sw_fini on CSB bo. fix: actually we don't need to pin/unpin it during hw_init/fini since it is created with kernel pinned, we only need to fullfill the CSB again during hw_init to prevent CSB/VRAM lost after S3 v2: get_csb in init_rlc so hw_init() will make CSIB content back even after reset or s3 v3: use bo_create_kernel instead of bo_create_reserved for CSB otherwise the bo_free_kernel() on CSB is not aligned and would lead to its internal reserve pending there forever take care of gfx7/8 as well Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu/gfx10: unlock srbm_mutex after queue programming finishXiaojie Yuan1-2/+3
srbm_mutex is to guarantee atomicity for r/w of gfx indexed registers Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu: Added ASIC specific checks in gfxhub V1.1 get XGMI infoJohn Clements1-2/+17
Added max hive/node info checks per supported ASIC Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu: use CPU to flush vmhub if sched stoppedMonk Liu1-1/+2
otherwse the flush_gpu_tlb will hang if we unload the KMD becuase the schedulers already stopped Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdkfd: Contain MMHUB number in mmhub_v9_4_setup_vm_pt_regs()Yong Zhao4-14/+16
Adjust the exposed function prototype so that the caller does not need to know the MMHUB number. Signed-off-by: Yong Zhao <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu: load np fw prior before loading the TAsHawking Zhang1-33/+33
Platform TAs will independently toggle DF Cstate. for instance, get/set topology from xgmi ta. do error injection from ras ta. In such case, PMFW needs to be loaded before TAs so that all the subsequent Cstate calls recieved by PSP FW can be routed to PMFW. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu: unload asd in psp hw de-init phaseHawking Zhang1-0/+36
issue unload_ta_cmd to tOS to unload asd driver Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-03drm/amdgpu: drop asd shared memoryHawking Zhang2-38/+18
asd shared memory is not needed since drivers doesn't invoke any further cmd to asd directly after the asd loading. trust application is the one who needs to talk to asd after the initialization Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-02drm/amdgpu/sriov: No need the event 3 and 4 nowEmily Deng1-2/+0
As will call unload kms when initialize fail, and the unload kms will send event 3 and 4, so don't need event 3 and 4 in device init. Signed-off-by: Emily Deng <[email protected]> Reviewed-by: Zhan Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-02drm/amdgpu: Added ASIC specific checks in gfxhub V1.1 get XGMI infoJohn Clements1-2/+17
Added max hive/node info checks per supported ASIC Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-02drm/amd/display: Load TA firmware for navi10/12/14Bhawanpreet Lakha1-0/+25
load the ta firmware for navi10/12/14. This is already being done for raven/picasso and is needed for supporting hdcp on navi Signed-off-by: Bhawanpreet Lakha <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-02drm/amdgpu: not remove sysfs if not create sysfsYintian Tao2-4/+15
When load amdgpu failed before create pm_sysfs and ucode_sysfs, the pm_sysfs and ucode_sysfs should not be removed. Otherwise, there will be warning call trace just like below. [ 24.836386] [drm] VCE initialized successfully. [ 24.841352] amdgpu 0000:00:07.0: amdgpu_device_ip_init failed [ 25.370383] amdgpu 0000:00:07.0: Fatal error during GPU init [ 25.889575] [drm] amdgpu: finishing device. [ 26.069128] amdgpu 0000:00:07.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110) [ 26.070110] [drm:gfx_v9_0_hw_fini [amdgpu]] *ERROR* KCQ disable failed [ 26.200309] [TTM] Finalizing pool allocator [ 26.200314] [TTM] Finalizing DMA pool allocator [ 26.200349] [TTM] Zone kernel: Used memory at exit: 0 KiB [ 26.200351] [TTM] Zone dma32: Used memory at exit: 0 KiB [ 26.200353] [drm] amdgpu: ttm finalized [ 26.205329] ------------[ cut here ]------------ [ 26.205330] sysfs group 'fw_version' not found for kobject '0000:00:07.0' [ 26.205347] WARNING: CPU: 0 PID: 1228 at fs/sysfs/group.c:256 sysfs_remove_group+0x80/0x90 [ 26.205348] Modules linked in: amdgpu(OE+) gpu_sched(OE) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache binfmt_misc snd_hda_codec_generic ledtrig_audio crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hda_core snd_hwdep snd_pcm snd_timer input_leds snd joydev soundcore serio_raw pcspkr evbug aesni_intel aes_x86_64 crypto_simd cryptd mac_hid glue_helper sunrpc ip_tables x_tables autofs4 8139too psmouse 8139cp mii i2c_piix4 pata_acpi floppy [ 26.205369] CPU: 0 PID: 1228 Comm: modprobe Tainted: G OE 5.2.0-rc1 #1 [ 26.205370] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 26.205372] RIP: 0010:sysfs_remove_group+0x80/0x90 [ 26.205374] Code: e8 35 b9 ff ff 5b 41 5c 41 5d 5d c3 48 89 df e8 f6 b5 ff ff eb c6 49 8b 55 00 49 8b 34 24 48 c7 c7 48 7a 70 98 e8 60 63 d3 ff <0f> 0b eb d7 66 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 [ 26.205375] RSP: 0018:ffffbee242b0b908 EFLAGS: 00010282 [ 26.205376] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 [ 26.205377] RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff97ad6f817380 [ 26.205377] RBP: ffffbee242b0b920 R08: ffffffff98f520c4 R09: 00000000000002b3 [ 26.205378] R10: ffffbee242b0b8f8 R11: 00000000000002b3 R12: ffffffffc0e58240 [ 26.205379] R13: ffff97ad6d1fe0b0 R14: ffff97ad4db954c8 R15: ffff97ad4db7fff0 [ 26.205380] FS: 00007ff3d8a1c4c0(0000) GS:ffff97ad6f800000(0000) knlGS:0000000000000000 [ 26.205381] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.205381] CR2: 00007f9b2ef1df04 CR3: 000000042aab8001 CR4: 00000000003606f0 [ 26.205384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 26.205385] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 26.205385] Call Trace: [ 26.205461] amdgpu_ucode_sysfs_fini+0x18/0x20 [amdgpu] [ 26.205518] amdgpu_device_fini+0x3b4/0x560 [amdgpu] [ 26.205573] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [ 26.205623] amdgpu_driver_load_kms+0xcd/0x250 [amdgpu] [ 26.205637] drm_dev_register+0x12b/0x1c0 [drm] [ 26.205695] amdgpu_pci_probe+0x12a/0x1e0 [amdgpu] [ 26.205699] local_pci_probe+0x47/0xa0 [ 26.205701] pci_device_probe+0x106/0x1b0 [ 26.205704] really_probe+0x21a/0x3f0 [ 26.205706] driver_probe_device+0x11c/0x140 [ 26.205707] device_driver_attach+0x58/0x60 [ 26.205709] __driver_attach+0xc3/0x140 Signed-off-by: Yintian Tao <[email protected]> Acked-by: Christian König <[email protected]> Reviewed-by: Nirmoy Das <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-02drm/amdgpu: fix GFX10 missing CSIB set(v3)Monk Liu1-28/+5
still need to init csb even for SRIOV v2: drop init_pg() for gfx10 at all since PG and GFX off feature will be fully controled by RLC and SMU fw for gfx10 v3: drop the flush_gpu_tlb lines since we consider it is only usefull in emulation Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.