| Age | Commit message (Collapse) | Author | Files | Lines |
|
Remove bit 31 for scratch2 to indicate the Hardware bug work around is active.
Signed-off-by: James Zhu <[email protected]>
Acked-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Scan enc/jpeg fences to init dpg pause new state in begin use.
It will help set dpg mode to desire state actively.
Signed-off-by: James Zhu <[email protected]>
Acked-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
We already print an error message that an IB test failed in the common
code.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Andrey Grodzovsky <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Move all error messages from IP specific code into the common helper.
This way we now uses the ring name in the messages instead of the index
and note which device is affected as well.
Also cleanup error handling in the IP specific code and consequently use
ETIMEDOUT when the ring test timed out.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Andrey Grodzovsky <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Correct VCN cache window definition. The old one
is reused from UVD, and it is not fully correct.
Signed-off-by: James Zhu <[email protected]>
Acked-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Replace value with defined macro to make
code more readable
Signed-off-by: James Zhu <[email protected]>
Acked-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use mmUVD_SCRATCH2 tracking decode write point.
It will help avoid dpg pause mode hang issue.
Signed-off-by: James Zhu <[email protected]>
Acked-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
I have some pulls based on rc6, and I prefer to have an explicit backmerge.
Signed-off-by: Dave Airlie <[email protected]>
|
|
The vce cancel_delayed_work_sync never be called.
driver call the function in error path.
This caused the A+A suspend hang when runtime pm enebled.
As we will visit the smu in the idle queue. this will cause
smu hang because the dgpu has been suspend, and the dgpu also
will be waked up. As the smu has been hang, so the dgpu resume
will failed.
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Feifei Xu <[email protected]>
Signed-off-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Fix some indentation issues.
Reviewed-by: Christian König <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add functions to support VCN DPG pause mode.
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use register UVD_SCRATCH9 for VCN ring/ib test. Since those registers
can't be directly accessed under DPG(Dynamic Power Gate) mode.
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Treat them all as Raven rather than adding a new picasso
asic type. This simplifies a lot of code and also handles the
case of rv2 chips with the 0x15d8 pci id. It also fixes dmcu
fw handling for picasso.
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Specify raven2 vcn firmware on amdgpu_vce_sw_init.
Signed-off-by: Feifei Xu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add vcn support for picasso.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
this patch is a workaround for the gpu hang
at video begin/end time if gfx off is enabled.
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The allocated size can be (at least?) as large as megabytes, and
there's no need for it to be physically contiguous.
May avoid spurious failures to initialize / suspend the corresponding
block while there's memory pressure.
Bugzilla: https://bugs.freedesktop.org/107432
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Michel Dänzer <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Setup psp firmware loading for VCN, and make VCN block
booting from tmr mac address.
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Huang Rui <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Make sure that we properly initialize at least the sched member.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Junwei Zhang <[email protected]>
Acked-by: Chunming Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes: 22cc6c5e19 (drm/amdgpu: Add runtime VCN PG support)
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
VCN won't get power off when only jpeg active
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Two requests have come in for a backmerge,
and I've got some pull reqs on rc2, so this
just makes sense.
Signed-off-by: Dave Airlie <[email protected]>
|
|
Support new VCN FW version naming convention:
[31, 28] for VEP interface major version if applicable
[27, 24] for decode interface major version
[23, 20] for encode interface major version
[19, 12] for encode interface minor version
[11, 0] for firmware revision
Bit 20-23, it is encode major and non-zero for new naming convention.
This field is part of version minor and DRM_DISABLED_FLAG in old naming
convention. Since the latest version minor is 0x5B and DRM_DISABLED_FLAG
is zero in old naming convention, this field is always zero so far.
These four bits are used to tell which naming convention is present.
Signed-off-by: James Zhu <[email protected]>
Reviewed-by: Fang, Peter <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add an ib test for vcn jpeg.
Signed-off-by: Boyuan Zhang <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add a ring test for vcn jpeg.
Signed-off-by: Boyuan Zhang <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add software finish for vcn jpeg ring.
v2: remove unnecessary scheduler entity.
Signed-off-by: Boyuan Zhang <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It missed vcn.fw_version setting when init vcn microcode, and it will be used to
report vcn ucode version via amdgpu_firmware_info sysfs interface.
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
It should be stateless, and no need for scheduler to take care specially.
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable support for dynamically powering up/down VCN on demand.
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Take the encode rings into account in the idle work handler.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
this patch also effect the amdgpu and etnaviv drivers which
use the function drm_sched_entity_init
Signed-off-by: Nayan Deshmukh <[email protected]>
Suggested-by: Christian König <[email protected]>
Acked-by: Lucas Stach <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Start to use amdgpu_bo_create_reserved v2.
v2:
Fix missing pointer init to NULL.
Remove extra new lines.
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Andrey Grodzovsky <[email protected]>
Tested-and-Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit 2046d46db9166bddc84778f0b3477f6d1e9068ea.
Not needed any more.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Remove the header where it's not used.
Acked-by: Christian Konig <[email protected]>
Signed-off-by: Shaoyun Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This moves and renames the AMDGPU scheduler to a common location in DRM
in order to facilitate re-use by other drivers. This is mostly a straight
forward rename with no code changes.
One notable exception is the function to_drm_sched_fence(), which is no
longer a inline header function to avoid the need to export the
drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures.
Reviewed-by: Chunming Zhou <[email protected]>
Tested-by: Dieter Nützel <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Cleanup asic_reg/raven1/VCN folder. Remove unused vcn_1_0_default.h.
Signed-off-by: Feifei Xu <[email protected]>
Acked-by: Christian König <[email protected]>
Reviewed-by: Junwei Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Remove asic_reg/vega10 folder.
Signed-off-by: Feifei Xu <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Give moving a BO into place an operation context to work with.
v2: rebased
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Michel Dänzer <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Tested-by: Dieter Nützel <[email protected]>
Tested-by: Michel Dänzer <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When this VF stays in exclusive mode for long, other VFs will be
impacted.
The redundant messages causes exclusive mode timeout when they're
redirected. That is a normal use case for cloud service to redirect
guest log to virtual serial port.
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: pding <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
this member will be used later, it will points to
the real var inside of context and CS_SUBMIT & gpu schdduler
can decide if skip a job depends on context->guilty or *entity->guilty
Signed-off-by: Monk Liu <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The parameter init_value contains the value to which we initialized
VRAM bo when AMDGPU_GEM_CREATE_VRAM_CLEARED flag is set.
Signed-off-by: Yong Zhao <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The dpm control for vcn has been moved to firmware, kernel always spins
"amdgpu: [powerplay] pp_dpm_powergate_uvd was not implemented", each
time when application runs, disable it for now till pg/cg. Also remove
clock manual setting when dpm disabled, which was inherited from uvd.
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Based on new vcn firmware interface changes
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update and enable the vcn encode IB test.
Signed-off-by: Leo Liu <[email protected]>
Acked-by: Christian König <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Wire up the callback and enable them.
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Leo Liu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Hope it will be generic for vcn later
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add encode ring and ib tests.
Signed-off-by: Leo Liu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|