aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
AgeCommit message (Collapse)AuthorFilesLines
2021-05-19drm/amdgpu: Conditionally reset RAS counters on bootJohn Clements1-6/+1
Only clear RAS error counters if perestent EDC harvesting is not supported Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-04-09drm/amdgpu: split gfx callbacks into ras and non-ras onesHawking Zhang1-2/+3
gfx ras is only available in cerntain ip generations. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Dennis Li <[email protected]> Reviewed-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-04-09drm/amd/pm: unify the interface for gfx state settingEvan Quan1-10/+6
No need to have special handling for swSMU supported ASICs. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-04-09drm/amdgpu: add the sched_score to amdgpu_ring_initChristian König1-3/+2
Allow separate ring to share the same scheduler score. No functional change. Signed-off-by: Christian König <[email protected]> Reviewed-and-Tested-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-04-09drm/amdgpu: wrap kiq ring ops with kiq spinlockNirmoy Das1-4/+11
KIQ ring is being operated by kfd as well as amdgpu. KFD is using kiq lock, we should the same from amdgpu side as well. Signed-off-by: Nirmoy Das <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-04-09drm/amdgpu: add codes to capture invalid hardware access when recoveryDennis Li1-2/+2
When recovery thread has begun GPU reset, there should be not other threads to access hardware, otherwise system randomly hang. v2 (chk): rewritten from scratch, use trylock and lockdep instead of hand wiring the logic. v3: add in_irq check v4: change to check in_task Signed-off-by: Dennis Li <[email protected]> Signed-off-by: Christian König <[email protected]> Reviewed-by: Christian König <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-03-23drm/amdgpu: harvest edc status when connected to host via xGMIDennis Li1-1/+8
When connected to a host via xGMI, system fatal errors may trigger warm reset, driver has no change to query edc status before reset. Therefore in this case, driver should harvest previous error loging registers during boot, instead of only resetting them. v2: 1. IP's ras_manager object is created when its ras feature is enabled, so change to query edc status after amdgpu_ras_late_init called 2. change to enable watchdog timer after finishing gfx edc init Signed-off-by: Dennis Li <[email protected]> Reivewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-02-09drm/amdgpu: enable only one high prio compute queueNirmoy Das1-7/+8
For high priority compute to work properly we need to enable wave limiting on gfx pipe. Wave limiting is done through writing into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high priority compute queue to avoid race condition between multiple high priority compute queues writing that register simultaneously. Signed-off-by: Nirmoy Das <[email protected]> Acked-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-13drm/amd/pm: add gfx_state_change_set() for rn gfx power switch (v2)Prike Liang1-9/+9
The gfx_state_change_set() funtion can support set GFX power change status to D0/D3. v2: make sure to register callback (Alex) Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-13drm/amdgpu: add amdgpu_gfx_state_change_set() set gfx power change entry (v2)Prike Liang1-0/+20
The new amdgpu_gfx_state_change_set() funtion can support set GFX power change status to D0/D3. v2: squash in warning fix (Alex) Signed-off-by: Prike Liang <[email protected]> Acked-by: Huang Rui <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-13drm/amdgpu: fix compute queue priority if num_kcq is less than 4Nirmoy Das1-3/+7
Compute queues are configurable with module param, num_kcq. amdgpu_gfx_is_high_priority_compute_queue was setting 1st 4 queues to high priority queue leaving a null drm scheduler in adev->gpu_sched[hw_ip]["normal_prio"].sched if num_kcq < 5. This patch tries to fix it by alternating compute queue priority between normal and high priority. Fixes: 33abcb1f5a1719b1c (drm/amdgpu: set compute queue priority at mqd_init) Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-16drm/amdgpu: move amdgpu_num_kcq handling to a helperAlex Deucher1-0/+11
Add a helper so we can set per asic default values. Also, the module parameter is currently clamped to 8, but clamp it per asic just in case some asics have different limits in the future. Enable the option on gfx6,7 as well for consistency. Acked-by: Nirmoy Das <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-09-15drm/amdgpu: Avoid accessing HW when suspending SW stateAndrey Grodzovsky1-0/+6
At this point the ASIC is already post reset by the HW/PSP so the HW not in proper state to be configured for suspension, some blocks might be even gated and so best is to avoid touching it. v2: Rename in_dpc to more meaningful name Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-24drm/amdgpu: refine message print for devices of hiveDennis Li1-2/+2
Using dev_xxx instead of DRM_xxx/pr_xxx to indicate which device of a hive is the message for. Reviewed-by: Christian König <[email protected]> Signed-off-by: Dennis Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-24drm/amdgpu: refine codes to avoid reentering GPU recoveryDennis Li1-2/+2
if other threads have holden the reset lock, recovery will fail to try_lock. Therefore we introduce atomic hive->in_reset and adev->in_gpu_reset, to avoid reentering GPU recovery. v2: drop "? true : false" in the definition of amdgpu_in_reset Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Dennis Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-14drm/amdgpu: revert "fix system hang issue during GPU reset"Christian König1-3/+3
The whole approach wasn't thought through till the end. We already had a reset lock like this in the past and it caused the same problems like this one. Completely revert the patch for now and add individual trylock protection to the hardware access functions as necessary. This reverts commit df9c8d1aa278c435c30a69b8f2418b4a52fcb929. Signed-off-by: Christian König <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-14drm/amdgpu: reconfigure spm golden settings on Navi1x after GFXOFF exit(v3)Tianci.Yin1-1/+7
On Navi1x, the SPM golden settings are lost after GFXOFF enter/exit, so reconfigure the golden settings after GFXOFF exit. Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Tianci.Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-08-04drm/amdgpu: introduce a new parameter to configure how many KCQ we want(v5)Monk Liu1-30/+19
what: the MQD's save and restore of KCQ (kernel compute queue) cost lots of clocks during world switch which impacts a lot to multi-VF performance how: introduce a paramter to control the number of KCQ to avoid performance drop if there is no kernel compute queue needed notes: this paramter only affects gfx 8/9/10 v2: refine namings v3: choose queues for each ring to that try best to cross pipes evenly. v4: fix indentation some cleanupsin the gfx_compute_queue_acquire() v5: further fix on indentations more cleanupsin gfx_compute_queue_acquire() TODO: in the future we will let hypervisor driver to set this paramter automatically thus no need for user to configure it through modprobe in virtual machine Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-07-27drm/amdgpu: fix system hang issue during GPU resetDennis Li1-3/+3
when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover, the atomic adev->in_gpu_reset and hive->in_reset are used to avoid re-entering GPU recovery. During GPU reset and resume, it is unsafe that other threads access GPU, which maybe cause GPU reset failed. Therefore the new rw_semaphore adev->reset_sem is introduced, which protect GPU from being accessed by external threads during recovery. v2: 1. add rwlock for some ioctls, debugfs and file-close function. 2. change to use dqm->is_resetting and dqm_lock for protection in kfd driver. 3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid re-enter GPU recovery for the same GPU hang. v3: 1. change back to use adev->reset_sem to protect kfd callback functions, because dqm_lock couldn't protect all codes, for example: free_mqd must be called outside of dqm_lock; [ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019 [ 1230.177221] Call Trace: [ 1230.178249] dump_stack+0x98/0xd5 [ 1230.179443] amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu] [ 1230.180673] gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu] [ 1230.181882] amdgpu_gart_unbind+0xa9/0xe0 [amdgpu] [ 1230.183098] amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu] [ 1230.184239] ? ttm_bo_put+0x171/0x5f0 [ttm] [ 1230.185394] ttm_tt_unbind+0x21/0x40 [ttm] [ 1230.186558] ttm_tt_destroy.part.12+0x12/0x60 [ttm] [ 1230.187707] ttm_tt_destroy+0x13/0x20 [ttm] [ 1230.188832] ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm] [ 1230.189979] ttm_bo_put+0x1be/0x5f0 [ttm] [ 1230.191230] amdgpu_bo_unref+0x1e/0x30 [amdgpu] [ 1230.192522] amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu] [ 1230.193833] free_mqd+0x25/0x40 [amdgpu] [ 1230.195143] destroy_queue_cpsch+0x1a7/0x270 [amdgpu] [ 1230.196475] pqm_destroy_queue+0x105/0x260 [amdgpu] [ 1230.197819] kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu] [ 1230.199154] kfd_ioctl+0x277/0x500 [amdgpu] [ 1230.200458] ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu] [ 1230.201656] ? tomoyo_file_ioctl+0x19/0x20 [ 1230.202831] ksys_ioctl+0x98/0xb0 [ 1230.204004] __x64_sys_ioctl+0x1a/0x20 [ 1230.205174] do_syscall_64+0x5f/0x250 [ 1230.206339] entry_SYSCALL_64_after_hwframe+0x49/0xbe 2. remove try_lock and introduce atomic hive->in_reset, to avoid re-enter GPU recovery. v4: 1. remove an unnecessary whitespace change in kfd_chardev.c 2. remove comment codes in amdgpu_device.c 3. add more detailed comment in commit message 4. define a wrap function amdgpu_in_reset v5: 1. Fix some style issues. Reviewed-by: Hawking Zhang <[email protected]> Suggested-by: Andrey Grodzovsky <[email protected]> Suggested-by: Christian König <[email protected]> Suggested-by: Felix Kuehling <[email protected]> Suggested-by: Lijo Lazar <[email protected]> Suggested-by: Luben Tukov <[email protected]> Signed-off-by: Dennis Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-07-21drm/amdgpu: add read amdgpu_gfxoff status in debugfsJinzhou.Su1-0/+14
Add interface for SMU12 device, used by UMR. v2: fix code style Signed-off-by: Jinzhou.Su <[email protected]> Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-05-01drm/amdgpu: Rename amdgpu_gfx_kcq_queue_mask_transform()Yong Zhao1-8/+8
Rename it to amdgpu_queue_mask_bit_to_set_resource_bit() to be more specific about its functionality. KFD will use it later. Signed-off-by: Yong Zhao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-05-01drm/amdgpu: update the method to set kcq queue maskLikun Gao1-1/+14
Use a common method to set queue mask before set kiq resource. The value of queue mask must suitablt for the designated form. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-24drm/amdgpu: protect ring overrunYintian Tao1-4/+18
Wait for the oldest sequence on the ring to be signaled in order to make sure there will be no command overrun. v2: fix coding stype and remove abs operation v3: remove the initialization of variable r Signed-off-by: Yintian Tao <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-23drm/amdgpu: request reg_val_offs each kiq read regYintian Tao1-8/+11
According to the current kiq read register method, there will be race condition when using KIQ to read register if multiple clients want to read at same time just like the expample below: 1. client-A start to read REG-0 throguh KIQ 2. client-A poll the seqno-0 3. client-B start to read REG-1 through KIQ 4. client-B poll the seqno-1 5. the kiq complete these two read operation 6. client-A to read the register at the wb buffer and get REG-1 value Therefore, use amdgpu_device_wb_get() to request reg_val_offs for each kiq read register. v2: fix the error remove v3: fix the print typo v4: remove unused variables Signed-off-by: Yintian Tao <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-13drm/amdgpu/kiq: add no_scheduler flag to KIQAlex Deucher1-0/+1
We don't want a GPU scheduler for this ring. Reviewed-by: Christian König <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-09drm/amdgpu: rework sched_list generationNirmoy Das1-1/+2
Generate HW IP's sched_list in amdgpu_ring_init() instead of amdgpu_ctx.c. This makes amdgpu_ctx_init_compute_sched(), ring.has_high_prio and amdgpu_ctx_init_sched() unnecessary. This patch also stores sched_list for all HW IPs in one big array in struct amdgpu_device which makes amdgpu_ctx_init_entity() much more leaner. v2: fix a coding style issue do not use drm hw_ip const to populate amdgpu_ring_type enum v3: remove ctx reference and move sched array and num_sched to a struct use num_scheds to detect uninitialized scheduler list v4: use array_index_nospec for user space controlled variables fix possible checkpatch.pl warnings Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-10drm/amdgpu: call ras_debugfs_create_all in debugfs_initTao Zhou1-1/+0
and remove each ras IP's own debugfs creation this is required to fix ras when the driver does not use the drm load and unload callbacks due to ordering issues with the drm device node. Signed-off-by: Tao Zhou <[email protected]> Signed-off-by: Stanley.Yang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-09drm/amdgpu: set compute queue priority at mqd_initNirmoy Das1-0/+8
We were changing compute ring priority while rings were being used before every job submission which is not recommended. This patch sets compute queue priority at mqd initialization for gfx8, gfx9 and gfx10. Policy: make queue 0 of each pipe as high priority compute queue High/normal priority compute sched lists are generated from set of high/normal priority compute queues. At context creation, entity of compute queue get a sched list from high or normal priority depending on ctx->priority Signed-off-by: Nirmoy Das <[email protected]> Acked-by: Alex Deucher <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-26drm/amdgpu: use amdgpu_ring_test_helper when possibleNirmoy Das1-1/+1
amdgpu_ring_test_helper already handles ring->sched.ready correctly Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-01-22drm/amdgpu: provide a generic function interface for reading/writing ↵chen gong1-2/+94
register by KIQ Move amdgpu_virt_kiq_rreg/amdgpu_virt_kiq_wreg function to amdgpu_gfx.c, and rename them to amdgpu_kiq_rreg/amdgpu_kiq_wreg.Make it generic and flexible. Signed-off-by: chen gong <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-01-14drm/amd/powerplay: cover the powerplay implementation details V3Evan Quan1-6/+0
This can save users much troubles. As they do not actually need to care whether swSMU or traditional powerplay routine should be used. V2: apply the fixes to vi.c and cik.c also V3: squash in oops fix Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-18drm/amdgpu: drop useless BACO arg in amdgpu_ras_reset_gpuGuchun Chen1-1/+1
BACO reset mode strategy is determined by latter func when calling amdgpu_ras_reset_gpu. So not to confuse audience, drop it. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-22drm/amdgpu/gfx10: fix out-of-bound mqd_backup array accessXiaojie Yuan1-2/+0
Fixes: 0900a9efdb7909 ("drm/amdgpu/gfx10: fix mqd backup/restore for gfx rings (v2)") Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-22drm/amdgpu/gfx10: fix mqd backup/restore for gfx rings (v2)Xiaojie Yuan1-1/+1
1. no need to allocate an extra member for 'mqd_backup' array 2. backup/restore mqd to/from the correct 'mqd_backup' array slot v2: warning fix (Alex) Signed-off-by: Xiaojie Yuan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-10-25drm/amdgpu: remove unused parameter in amdgpu_gfx_kiq_free_ringNirmoy Das1-2/+1
Signed-off-by: Nirmoy Das <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-10-03drm/amdgpu: remove set but not used variable 'pipe'yu kuai1-3/+1
Fixes gcc '-Wunused-but-set-variable' warning: rivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_graphics_queue_acquire’: drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:234:16: warning: variable ‘pipe’ set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Reported-by: Hulk Robot <[email protected]> Signed-off-by: yu kuai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-10-03drm/amdgpu: add comments in ras interrupt callbackTao Zhou1-1/+6
add comments to clarify why checking GFX IP BLOCK for each ras interrupt callback Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-10-03drm/amdgpu: remove ih_info parameter of gfx_ras_late_initTao Zhou1-9/+7
gfx_ras_late_init can get the info by itself Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-10-03drm/amdgpu: add common gfx_ras_fini functionTao Zhou1-0/+15
gfx_ras_fini can be shared among all generations of gfx Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-10-03drm/amdgpu: move gfx ecc functions to generic gfx fileTao Zhou1-0/+33
gfx ras ecc common functions could be reused among all gfx generations Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-09-13drm/amdgpu/gfx: switch to amdgpu_gfx_ras_late_init helper functionHawking Zhang1-0/+49
amdgpu_gfx_ras_late_init is used to init gfx specfic ras debugfs/sysfs node and gfx specific interrupt handler. It can be shared among gfx generations Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: enable async gfx ring for navi14Xiaojie Yuan1-3/+3
Same as navi10. Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-25Merge branch 'drm-next' into drm-next-5.3Alex Deucher1-1/+1
Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amd: add gfxoff support on navi10Kenneth Feng1-1/+3
add the gfxoff interface to navi10,it's disabled by default. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: create mqd for gfx queues on navi10Hawking Zhang1-1/+34
mqd is the memory queue descriptor for gfx and compute. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Jack Xiao <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu/gfx10: add special unmap_queues packet for preemptionJack Xiao1-1/+2
CP introduced a special unmap_queues packet for gfx preemtion. Acked-by: Alex Deucher <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: Move common code to amdgpu_gfx.cHawking Zhang1-0/+47
move common code to amdgpu_gfx_enable_kcq,so this function can be shared with gfx8 and gfx9 Signed-off-by: Hawking Zhang <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: Add common gfx func Disable kcq via kiqRex Zhu1-0/+19
so can be shared with gfx8 and gfx9 Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: rename amdgpu_gfx_compute_mqd_sw_initHawking Zhang1-4/+4
The function now will create mqd bos for both gfx queue and compute queue Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Jack Xiao <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: add helper function for gfx queue/bitmap transitionHawking Zhang1-6/+36
Similar to what we do for compute already. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Jack Xiao <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.