aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-30drm/amdgpu: Handle job is NULL use case in amdgpu_device_gpu_recoverAndrey Grodzovsky1-6/+4
This should be checked at all places job is accessed. Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-29drm/amdgpu: Enable DC on RenoirRoman Li1-0/+3
Enable DC support for renoir. Acked-by: Harry Wentland <[email protected]> Signed-off-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-29drm/amdgpu: introduce vram lost for reset (v2)Monk Liu1-2/+2
for SOC15/vega10 the BACO reset & mode1 would introduce vram lost in high end address range, current kmd's vram lost checking cannot catch it since it only check very ahead visible frame buffer v2: cover NV as well Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-15drm/amdgpu: Use new mode2 reset interface for RV.Andrey Grodzovsky1-0/+1
Integrate the mode2 reset into rest sequence. v2: Check ppfuncs pointer for NULL Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-12drm/amdgpu: add renoir support for gpu_info and ip block settingHuang Rui1-1/+7
This patch adds renoir support for gpu_info firmware and ip block setting. Acked-by: Huang Rui <[email protected]> Signed-off-by: Huang Rui <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-12drm/amdgpu: add renoir asic_type enumHuang Rui1-0/+1
This patch adds renoir to amd_asic_type enum and amdgpu_asic_name[]. Acked-by: Huang Rui <[email protected]> Signed-off-by: Huang Rui <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-09drm/amdgpu: remove RREG64/WREG64Tao Zhou1-33/+0
atomic 64 bits REG operations are useless currently Reviewed-by: Christian König <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-09drm/amdgpu: replace readq/writeq with atomic64 operationsTao Zhou1-6/+2
what we really want is a read or write that is guaranteed to be 64 bits at a time, atomic64 operations are supported on all architectures Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-06drm/amdgpu: Fix GPU reset crash regression.Andrey Grodzovsky1-0/+2
amdgpu_ip_block.status.hw for GMC wasn't set to false on suspend during GPU reset and so on resume gmc_v9_0_resume wasn't called. Caused by 'drm/amdgpu: fix double ucode load by PSP(v3)' Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-06drm/amdgpu: Fix panic during gpu resetxinhui pan1-1/+1
Clear the flag after hw suspend, otherwise it skips the corresponding hw resume. Signed-off-by: xinhui pan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-02drm/amdgpu: Add nv12 DC ip blockLeo Li1-0/+1
Load DC and amdgpu display manager Signed-off-by: Leo Li <[email protected]> Reviewed-by: Xiaojie Yuan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-02drm/amdgpu: set asic family and ip blocks for navi12Xiaojie Yuan1-0/+1
same with navi10 Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-02drm/amdgpu: add gpu_info firmware for navi12Xiaojie Yuan1-0/+4
gpu_info firmare store asic configuration details. Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-02drm/amdgpu: add navi12 asic typeXiaojie Yuan1-0/+1
Add asic type. Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-02drm/amdgpu: fix double ucode load by PSP(v3)Monk Liu1-21/+38
previously the ucode loading of PSP was repreated, one executed in phase_1 init/re-init/resume and the other in fw_loading routine Avoid this double loading by clearing ip_blocks.status.hw in suspend or reset prior to the FW loading and any block's hw_init/resume v2: still do the smu fw loading since it is needed by bare-metal v3: drop the change in reinit_early_sriov, just clear all block's status.hw in the head place and set the status.hw after hw_init done is enough Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Emily Deng <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-02drm/amdgpu: cleanup vega10 SRIOV code pathMonk Liu1-3/+0
we can simplify all those unnecessary function under SRIOV for vega10 since: 1) PSP L1 policy is by force enabled in SRIOV 2) original logic always set all flags which make itself a dummy step besides, 1) the ih_doorbell_range set should also be skipped for VEGA10 SRIOV. 2) the gfx_common registers should also be skipped for VEGA10 SRIOV. Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Emily Deng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-31drm/amdgpu: add RREG64/WREG64(_PCIE) operationsTao Zhou1-0/+73
add 64 bits register access functions v2: implement 64 bit functions in low level Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Dennis Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-30drm/amdgpu: put the SMC into the proper state on reset/unloadAlex Deucher1-0/+27
When doing a GPU reset or unloading the driver, we need to put the SMU into the apprpriate state for the re-init after the reset or unload to reliably work. I don't think this is necessary for BACO because the SMU actually controls the BACO state to it needs to be active. For suspend (S3), the asic is put into D3 so the SMU would be powered down so I don't think we need to put the SMU into any special state. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: add Arcturus gpu info firmwareLe Ma1-0/+4
Add GPU info firmware for Arcturus. Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: add to set Arcturus ip blocksLe Ma1-0/+1
Add IP blocks for Arcturus. Signed-off-by: Le Ma <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: add Arcturus asic typeLe Ma1-0/+1
Add asic type for Arcturus. Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amd/display: add dm blockBhawanpreet Lakha1-0/+1
enable DC for navi14. Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: set asic family and ip blocks for navi14Xiaojie Yuan1-0/+1
same with navi10 Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: add gpu_info firmware for navi14Xiaojie Yuan1-0/+4
Add navi14 to case statement to load the GPU info firmware. Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-18drm/amdgpu: add navi14 asic typeXiaojie Yuan1-0/+1
Add CHIP_NAVI14 to the list of asic types. Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-09drm/amdgpu/psp: add a mutex to protect access to the psp ringAlex Deucher1-0/+1
We need to serialize access to the psp ring if there are multiple callers at runtime. Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-09drm/amdgpu: properly guard the generic discovery codeAlex Deucher1-2/+2
It's only available on navi and newer. Reviewed-by: Xiaojie Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-08amdgpu: make pmu support optionalArnd Bergmann1-2/+4
When CONFIG_PERF_EVENTS is disabled, we cannot compile the pmu portion of the amdgpu driver: drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:48:38: error: no member named 'hw' in 'struct perf_event' struct hw_perf_event *hwc = &event->hw; ~~~~~ ^ drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:51:13: error: no member named 'attr' in 'struct perf_event' if (event->attr.type != event->pmu->type) ~~~~~ ^ ... Use conditional compilation for this file. Fixes: 9c7c85f7ea1f ("drm/amdgpu: add pmu counters") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-05drm/amdgpu: Disable ras features on all IPs before gpu resetxinhui pan1-0/+4
Perform a ras_suspend to disable ras on all IPs to workaround some ROCm stability issue. Signed-off-by: xinhui pan <[email protected]> Acked-by: Andrey Grodzovsky <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-01drm/amdgpu: enable PCIE atomics ops supportJack Xiao1-0/+11
GPU atomics operation depends on PCIE atomics support. Always enable PCIE atomics ops support in case that it hasn't been enabled. Signed-off-by: Jack Xiao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-01drm/amdgpu: fix MGPU fan boost enablement for XGMI resetEvan Quan1-0/+13
MGPU fan boost feature should not be enabled until all the devices from the same hive are all back from reset. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-25Merge branch 'drm-next' into drm-next-5.3Alex Deucher1-1/+2
Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <[email protected]>
2019-06-22drm/amdgpu: Enable DC support for Navi10Harry Wentland1-0/+3
Enable the IP for navi10. Signed-off-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amd/display: Read soc_bounding_box from gpu_info (v2)Harry Wentland1-1/+9
[WHY] We don't want to expose sensitive ASIC information before ASIC release. [HOW] Encode the soc_bounding_box in the gpu_info FW (for Linux) and read it at driver load. v2: fix warning when CONFIG_DRM_AMD_DC_DCN2_0 is not set (Alex) Signed-off-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu: add to set navi ip blocksHuang Rui1-0/+8
Set the IPs for navi10 in early_init like other asics. Signed-off-by: Huang Rui <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu: update golden setting programming logicHawking Zhang1-1/+4
Since from soc15, make sure only AndMasked bit get changed when applied or_mask Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Le Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu/mes: enable mes on navi10 and later asicJack Xiao1-0/+3
When amdgpu_mes is enabled and asic family is navi10 and later asic, enable mes per device. Acked-by: Hawking Zhang <[email protected]> Signed-off-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu/discovery: add module param for ip discovery enablementXiaojie Yuan1-0/+10
to control enablement. Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu: add mcbp unit test in debugfs (v3)Jack Xiao1-0/+1
The MCBP unit test is used to test the functionality of MCBP. It emualtes to send preemption request and resubmit the unfinished jobs. v2: squash in fixes (Alex) v3: squash in memory leak fix (Jack) Acked-by: Hawking Zhang <[email protected]> Signed-off-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu: enable the static csa when mcbp enabledJack Xiao1-1/+1
CSA is the Context Save Area for preemption. Acked-by: Hawking Zhang <[email protected]> Signed-off-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu: add mcbp driver parameterJack Xiao1-0/+3
Add mcbp driver parameter, so that mcbp feature can be enabled/disabled by driver parameter. Acked-by: Hawking Zhang <[email protected]> Signed-off-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: parse the new members added by gpu_info ucode v1_1Hawking Zhang1-0/+9
Parse the new parameters for gfx10. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: add navi10 gpu info firmwareHuang Rui1-0/+4
gpu info firmware stores configuration data for various IP blocks. Signed-off-by: Huang Rui <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: add navi10 asic typeHuang Rui1-0/+1
Signed-off-by: Huang Rui <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: add pmu countersJonathan Kim1-0/+6
adding perf event counters Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-19Merge v5.2-rc5 into drm-nextDaniel Vetter1-9/+3
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier removal topic branch into drm-misc-next. Signed-off-by: Daniel Vetter <[email protected]>
2019-06-17drm/amdgpu: wait to fetch the vbios until after common initAlex Deucher1-11/+13
We need the asic_funcs set for the get rom callbacks in some cases. Tested-by: Kent Russell <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-14Merge tag 'drm-misc-next-2019-06-14' of ↵Daniel Vetter1-1/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3: UAPI Changes: Cross-subsystem Changes: - Add code to signal all dma-fences when freed with pending signals. - Annotate reservation object access in CONFIG_DEBUG_MUTEXES Core Changes: - Assorted documentation fixes. - Use irqsave/restore spinlock to add crc entry. - Move code around to drm_client, for internal modeset clients. - Make drm_crtc.h and drm_debugfs.h self-contained. - Remove drm_fb_helper_connector. - Add bootsplash to todo. - Fix lock ordering in pan_display_legacy. - Support pinning buffers to current location in gem-vram. - Remove the now unused locking functions from gem-vram. - Remove the now unused kmap-object argument from vram helpers. - Stop checking return value of debugfs_create. - Add atomic encoder enable/disable helpers. - pass drm_atomic_state to atomic connector check. - Add atomic support for bridge enable/disable. - Add self refresh helpers to core. Driver Changes: - Add extra delay to make MTP SDM845 work. - Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip. - Add zpos and ?BGR8888 support to meson. - More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis. - Allow synopsis to unwedge the i2c hdmi bus. - Add orientation quirks for GPD panels. - Edid cleanups and fixing handling for edid < 1.2. - Add runtime pm to stm. - Handle s/r in dw-hdmi. - Add hooks for power on/off to dsi for stm. - Remove virtio dirty tracking code, done in drm core. - Rework BO handling in ast and mgag200. Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c, needed #include <linux/slab.h> to make it compile. Signed-off-by: Daniel Vetter <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-13drm/amdgpu: register pm sysfs for sriov (v2)Yintian Tao1-0/+6
we need register pm sysfs for virt in order to support dpm level modification because smu ip block will not be added under SRIOV v2: whitespace fixes (Alex) Signed-off-by: Yintian Tao <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-11drm/amd/amdgpu: remove vram_page_split kernel option (v3)Tom St Denis1-7/+0
This option is no longer needed. The default code paths are now the only option. v2: Add HPAGE support and a default for non contiguous maps v3: Misread 512 pages as MiB ... Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.