Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix a double free and an uninitialized pointer read error. Both tmp and
new are pointing at same address and both are freed which leads to
double free. Adding a check to verify if new and tmp are free in the
error_free label fixes the double free issue. new is not initialized to
null which also leads to a free on an uninitialized pointer.
Reviewed-by: André Almeida <[email protected]>
Suggested by: S. Amaranath <[email protected]>
Signed-off-by: Sebin Sebastian <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
GFXOFF has two different "state" values: one to define if the GPU is
allowed/disallowed to enter GFXOFF, usually called state; and another
one to define if currently GFXOFF is being used, usually called status.
Even when GFXOFF is allowed, GPU firmware can decide to not used it
accordingly to the GPU load.
Userspace can allow/disallow GPUs to enter into GFXOFF via debugfs. The
kernel maintains a counter of requests for GFXOFF (gfx_off_req_count)
that should be decreased to allow GFXOFF and increased to disallow.
The issue with this interface is that userspace can't be sure if GFXOFF
is currently allowed. Even by checking amdgpu_gfxoff file, one might get
an ambiguous 2, that means that GPU is currently out of GFXOFF, but that
can be either because it's currently disallowed or because it's allowed
but given the current GPU load it's enabled. Then, userspace needs to
rely on the fact that GFXOFF is enabled by default on boot and to track
this information.
To make userspace life easier and GFXOFF more reliable, return the
current state of GFXOFF to userspace when reading amdgpu_gfxoff with the
same semantics of writing: 0 means not allowed, not 0 means allowed.
Expose the current status of GFXOFF through a new file,
amdgpu_gfxoff_status.
Signed-off-by: André Almeida <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
To avoid code repetition, unify the function exit path when possible. No
functional changes.
Acked-by: Christian König <[email protected]>
Signed-off-by: André Almeida <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Allocate memory for register value and use the same values for devcoredump.
v1 -> v2: Change krealloc_array() to kmalloc_array()
v2 -> v3: Fix alignment
Signed-off-by: Somalapuram Amaranath <[email protected]>
Reviewed-by: Shashank Sharma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v1:
Add debugfs support to load/unload/invoke TA in runtime.
v2:
1. Update some variables to static.
2. Use PAGE_ALIGN to calculate shared buf size directly.
3. Remove fp check.
4. Update debugfs from read to write.
Signed-off-by: John Clements <[email protected]>
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The data revision was not changed to 5 from 4 when the CG flags
were extended to 64-bits. Since this was missed I took
the opportunity to add future upper 64-bits of PG flags
as well so we don't need to bump it again when that comes.
Signed-off-by: Tom St Denis <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
With this, we can support more CG flags.
Signed-off-by: Evan Quan <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
vcn fwlog is for debugging purpose only,
by default, it is disabled.
Signed-off-by: Ruijing Dong <[email protected]>
Reviewed-by: Leo Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Clang static analysis reports this error
amdgpu_debugfs.c:1690:9: warning: 1st function call
argument is an uninitialized value
tmp = krealloc_array(tmp, i + 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~
realloc uses tmp, so tmp can not be garbage.
And the return needs to be checked.
Fixes: 5ce5a584cb82 ("drm/amdgpu: add debugfs for reset registers list")
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.18-2022-02-25:
amdgpu:
- Raven2 suspend/resume fix
- SDMA 5.2.6 updates
- VCN 3.1.2 updates
- SMU 13.0.5 updates
- DCN 3.1.5 updates
- Virtual display fixes
- SMU code cleanup
- Harvest fixes
- Expose benchmark tests via debugfs
- Drop no longer relevant gart aperture tests
- More RAS restructuring
- W=1 fixes
- PSR rework
- DP/VGA adapter fixes
- DP MST fixes
- GPUVM eviction fix
- GPU reset debugfs register dumping support
- Misc display fixes
- SR-IOV fix
- Aldebaran mGPU fix
- Add module parameter to disable XGMI for testing
amdkfd:
- IH ring overflow logging fixes
- CRIU fixes
- Misc fixes
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
List of register populated for dump collection during the GPU reset.
Signed-off-by: Somalapuram Amaranath <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
They provide a nice smoke test of transfer performance
using SDMA. Allow the user to run these at runtime
rather than only at init time.
v2: fix permissions (Alex)
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Needed by umr to detect if ip discovered ASIC is an APU or not.
(v2): Remove asic type from packet it's not strictly needed
(v3): Correct comment
Signed-off-by: Tom St Denis <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
We want single instance of reset sem across all
reset clients because in case of XGMI we should stop
access cross device MMIO because any of them could be
in a reset in the moment.
Signed-off-by: Andrey Grodzovsky <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://www.spinics.net/lists/amd-gfx/msg74117.html
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Those implementation details(whether swsmu supported, some ppt_funcs supported,
accessing internal statistics ...)should be kept internally. It's not a good
practice and even error prone to expose implementation details.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
As the smu_context will be invisible from outside(of power). Also,
the smu_debug_mask can be shared around all power code instead of
some specific framework(swSMU) only.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
SMU firmware expects the driver maintains error context
and doesn't interact with SMU any more when SMU errors
occurred. That will aid in debugging SMU firmware issues.
Add SMU debug option support for this request, it can be
enabled or disabled via amdgpu_smu_debug debugfs file.
Use a 32-bit mask to indicate corresponding debug modes.
Currently, only one mode(HALT_ON_ERROR) is supported.
When enabled, it brings hardware to a kind of halt state
so that no one can touch it any more in the envent of SMU
errors.
The dirver interacts with SMU via sending messages. And
threre are three ways to sending messages to SMU in current
implementation. Handle them respectively as following:
1, smu_cmn_send_smc_msg_with_param() for normal timeout cases
Halt on any error.
2, smu_cmn_send_msg_without_waiting()/smu_cmn_wait_for_response()
for longer timeout cases
Halt on errors apart from ETIME. Otherwise this way won't work.
Let the user handle ETIME error in such a case.
3, smu_cmn_send_msg_without_waiting() for no waiting cases
Halt on errors apart from ETIME. Otherwise second way won't work.
== Command Guide ==
1, enable HALT_ON_ERROR mode
# echo 0x1 > /sys/kernel/debug/dri/0/amdgpu_smu_debug
2, disable HALT_ON_ERROR mode
# echo 0x0 > /sys/kernel/debug/dri/0/amdgpu_smu_debug
v5:
- Use bit mask to allow more debug features.(Evan)
- Use WRAN() instead of BUG().(Evan)
v4:
- Set to halt state instead of a simple hang.(Christian)
v3:
- Use debugfs_create_bool().(Christian)
- Put variable into smu_context struct.
- Don't resend command when timeout.
v2:
- Resend command when timeout.(Lijo)
- Use debugfs file instead of module parameter.
Signed-off-by: Lang Yu <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Unify BO evicting functionality for possible memory
types in amdgpu_ttm.c.
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Check first if debugfs is initialized before creating
amdgpu debugfs files.
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit 728e7e0cd61899208e924472b9e641dbeb0775c4.
Further discussion reveals that this feature is severely broken
and needs to be reverted ASAP.
GPU reset can never be delayed by userspace even for debugging or
otherwise we can run into in kernel deadlocks.
Signed-off-by: Christian König <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Useful for debugging and new asic validation.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Direct IB submission should be exclusive. So use write lock.
Signed-off-by: xinhui pan <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use debugfs_create_file_size API for creating ring debugfs, and as its a
NULL returning API, change the return type for amdgpu_debugfs_ring_init
API as well. Also cleanup surrounding code.
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Shashank Sharma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
debugfs APIs returns encoded error so use
IS_ERR for checking return value.
v2: return PTR_ERR(ent)
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-By: Shashank Sharma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This new debugfs interface uses an IOCTL interface in order to pass
along state information like SRBM and GRBM bank switching. This
new interface also allows a full 32-bit MMIO address range which
the previous didn't. With this new design we have room to grow
the flexibility of the file as need be.
(v2): Move read/write to .read/.write, fix style, add comment
for IOCTL data structure
(v3): C style comments
(v4): use u32 in struct and remove offset variable
(v5): Drop flag clearing in op function, use 0xFFFFFFFF for broadcast
instead of 0x3FF, use mutex for op/ioctl.
Signed-off-by: Tom St Denis <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Why: Previously hw fence is alloced separately with job.
It caused historical lifetime issues and corner cases.
The ideal situation is to take fence to manage both job
and fence's lifetime, and simplify the design of gpu-scheduler.
How:
We propose to embed hw_fence into amdgpu_job.
1. We cover the normal job submission by this method.
2. For ib_test, and submit without a parent job keep the
legacy way to create a hw fence separately.
v2:
use AMDGPU_FENCE_FLAG_EMBED_IN_JOB_BIT to show that the fence is
embedded in a job.
v3:
remove redundant variable ring in amdgpu_job
v4:
add tdr sequence support for this feature. Add a job_run_counter to
indicate whether this job is a resubmit job.
v5
add missing handling in amdgpu_fence_enable_signaling
Signed-off-by: Jingwen Chen <[email protected]>
Signed-off-by: Jack Zhang <[email protected]>
Reviewed-by: Andrey Grodzovsky <[email protected]>
Reviewed by: Monk Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Page table entries are now in embedded in VM BO, so
we do not need struct amdgpu_vm_pt. This patch replaces
struct amdgpu_vm_pt with struct amdgpu_vm_bo_base.
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1004: warning: expecting prototype for amdgpu_debugfs_regs_gfxoff_write(). Prototype was for amdgpu_debugfs_gfxoff_write() instead
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1053: warning: expecting prototype for amdgpu_debugfs_regs_gfxoff_status(). Prototype was for amdgpu_debugfs_gfxoff_read() instead
Cc: Alex Deucher <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Sumit Semwal <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
the register offset isn't needed division by 4 to pass RREG32_PCIE()
Signed-off-by: Kevin Wang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1589:0-23: WARNING:
fops_ib_preempt should be defined with DEFINE_DEBUGFS_ATTRIBUTE
./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1592:0-23: WARNING:
fops_sclk_set should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use debugfs API directly instead of drm middle layer.
This also includes following debugfs file output changes:
1 amdgpu_evict_vram/amdgpu_evict_gtt output will not contain any braces.
e.g. (0) --> 0
2 amdgpu_gpu_recover output will print return value of
amdgpu_device_gpu_recover() instead of not so important "gpu recover"
message.
v2: * checkpatch.pl: use '0444' instead of S_IRUGO.
* remove S_IFREG from mode.
* remove mode variable.
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use debugfs API directly instead of drm middle layer.
v2: * checkpatch.pl: use '0444' instead of S_IRUGO.
* remove S_IFREG from mode.
* remove mode variable.
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use debugfs API directly instead of drm middle layer.
v2: * checkpatch.pl: use '0444' instead of S_IRUGO.
* remove S_IFREG from mode.
* remove mode variable.
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Cleanup unnecessary debugfs dentries and surrounding functions.
v3: remove return value check for debugfs_create_file()
v2: remove ttm_debugfs_entries array.
do not init variables.
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.12-2021-01-20:
amdgpu:
- Fix non-x86 build
- W=1 fixes from Lee Jones
- Enable GPU reset on Navy Flounder
- Kernel doc fixes
- SMU workload profile fixes for APUs
- Display updates
- SR-IOV fixes
- Vangogh SMU feature enablment and bug fixes
- GPU reset support for Vangogh
- Misc cleanups
Conflicts:
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c
Resolve the conflict by picking the initialization value from amd from
f03e80d2e82c ("drm/amd/display: Initialize stack variable") over the
one Linus picked in 61d791365b72 ("drm/amd/display: avoid
uninitialized variable warning"). It shouldn't matter.
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Daniel Vetter <[email protected]>
|
|
Add interface to load, unload, invoke command for
secure display TA.
v2: Add debugfs interface for secure display TA
v3: fix warning in copy_from_user (Alex)
Signed-off-by: Jinzhou.Su <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Required backmerge since we will be based on top of v5.11, and there
has been a request to backmerge already to upstream some features.
Signed-off-by: Maarten Lankhorst <[email protected]>
|
|
Rename "ring_mirror_list" to "pending_list",
to describe what something is, not what it does,
how it's used, or how the hardware implements it.
This also abstracts the actual hardware
implementation, i.e. how the low-level driver
communicates with the device it drives, ring, CAM,
etc., shouldn't be exposed to DRM.
The pending_list keeps jobs submitted, which are
out of our control. Usually this means they are
pending execution status in hardware, but the
latter definition is a more general (inclusive)
definition.
Signed-off-by: Luben Tuikov <[email protected]>
Acked-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/405573/
Cc: Alexander Deucher <[email protected]>
Cc: Andrey Grodzovsky <[email protected]>
Cc: Christian König <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Christian König <[email protected]>
|
|
Rename "node" to "list" in struct drm_sched_job,
in order to make it consistent with what we see
being used throughout gpu_scheduler.h, for
instance in struct drm_sched_entity, as well as
the rest of DRM and the kernel.
Signed-off-by: Luben Tuikov <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/403515/
Cc: Alexander Deucher <[email protected]>
Cc: Andrey Grodzovsky <[email protected]>
Cc: Christian König <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Christian König <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:308: warning: Function parameter or member 'f' not described in 'amdgpu_debugfs_regs_read'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:308: warning: Function parameter or member 'buf' not described in 'amdgpu_debugfs_regs_read'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:308: warning: Function parameter or member 'size' not described in 'amdgpu_debugfs_regs_read'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:308: warning: Function parameter or member 'pos' not described in 'amdgpu_debugfs_regs_read'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:317: warning: Function parameter or member 'f' not described in 'amdgpu_debugfs_regs_write'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:317: warning: Function parameter or member 'buf' not described in 'amdgpu_debugfs_regs_write'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:317: warning: Function parameter or member 'size' not described in 'amdgpu_debugfs_regs_write'
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:317: warning: Function parameter or member 'pos' not described in 'amdgpu_debugfs_regs_write'
Cc: Alex Deucher <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Sumit Semwal <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.11-2020-11-05:
amdgpu:
- Add initial support for Vangogh
- Add support for Green Sardine
- Add initial support for Dimgrey Cavefish
- Scatter/Gather display support for Renoir
- Updates for Sienna Cichlid
- Updates for Navy Flounder
- SMU7 power improvements
- Modifier support for gfx9+
- CI BACO fixes
- Arcturus SMU fixes
- Lots of code cleanups
- DC fixes
- Kernel doc fixes
- Add more GPU HW client information to page fault error logging
- MPO clock tuning for RV
- FP fixes for DCN3 on ARM and PPC
radeon:
- Expose voltage via hwmon on Sumo APUs
amdkfd:
- Fix unique id handling
- Misc fixes
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.11:
UAPI Changes:
- doc: rules for EBUSY on non-blocking commits; requirements for fourcc
modifiers; on parsing EDID
- fbdev/sbuslib: Remove unused FBIOSCURSOR32
- fourcc: deprecate DRM_FORMAT_MOD_NONE
- virtio: Support blob resources for memory allocations; Expose host-visible
and cross-device features
Cross-subsystem Changes:
- devicetree: Add vendor Prefix for Yes Optoelectronics, Shanghai Top Display
Optoelectronics
- dma-buf: Add struct dma_buf_map that stores DMA pointer and I/O-memory flag;
dma_buf_vmap()/vunmap() return address in dma_buf_map; Use struct_size() macro
Core Changes:
- atomic: pass full state to CRTC atomic enable/disable; warn for EBUSY during
non-blocking commits
- dp: Prepare for DP 2.0 DPCD
- dp_mst: Receive extended DPCD caps
- dma-buf: Documentation
- doc: Format modifiers; dma-buf-map; Cleanups
- fbdev: Don't use compat_alloc_user_space(); mark as orphaned
- fb-helper: Take lock in drm_fb_helper_restore_work_fb()
- gem: Convert implementation and drivers to GEM object functions, remove
GEM callbacks from struct drm_driver (expect gem_prime_mmap)
- panel: Cleanups
- pci: Add legacy infix to drm_irq_by_busid()
- sched: Avoid infinite waits in drm_sched_entity_destroy()
- switcheroo: Cleanups
- ttm: Remove AGP support; Don't modify caching during swapout; Major
refactoring of the implementation and API that affects all depending
drivers; Add ttm_bo_wait_ctx(); Add ttm_bo_pin()/unpin() in favor of
TTM_PL_FLAG_NO_EVICT; Remove ttm_bo_create(); Remove fault_reserve_notify()
callback; Push move() implementation into drivers; Remove TTM_PAGE_FLAG_WRITE;
Replace caching flags with init-time cache setting; Push ttm_tt_bind() into
drivers; Replace move_notify() with delete_mem_notify(); No overlapping memcpy();
no more ttm_set_populated()
- vram-helper: Fix BO top-down placement; TTM-related changes; Init GEM
object functions with defaults; Default placement in system memory; Cleanups
Driver Changes:
- amdgpu: Use GEM object functions
- armada: Use GEM object functions
- aspeed: Configure output via sysfs; Init struct drm_driver with
- ast: Reload LUT after FB format changes
- bridge: Add driver and DT bindings for anx7625; Cleanups
- bridge/dw-hdmi: Constify ops
- bridge/ti-sn65dsi86: Add retries for link training
- bridge/lvds-codec: Add support for regulator
- bridge/tc358768: Restore connector support DRM_GEM_CMA_DRIVEROPS; Cleanups
- display/ti,j721e-dss: Add DT properies assigned-clocks, assigned-clocks-parent and
dma-coherent
- display/ti,am65s-dss: Add DT properies assigned-clocks, assigned-clocks-parent and
dma-coherent
- etnaviv: Use GEM object functions
- exynos: Use GEM object functions
- fbdev: Cleanups and compiler fixes throughout framebuffer drivers
- fbdev/cirrusfb: Avoid division by 0
- gma500: Use GEM object functions; Fix double-free of connector; Cleanups
- hisilicon/hibmc: I2C-based DDC support; Use to_hibmc_drm_device(); Cleanups
- i915: Use GEM object functions
- imx/dcss: Init driver with DRM_GEM_CMA_DRIVER_OPS; Cleanups
- ingenic: Reset pixel clock when parent clock changes; support reserved
memory; Alloc F0 and F1 DMA channels at once; Support different pixel formats;
Revert support for cached mmap buffers
on F0/F1; support 30-bit/24-bit/8-bit-palette modes
- komeda: Use DEFINE_SHOW_ATTRIBUTE
- mcde: Detect platform_get_irq() errors
- mediatek: Use GEM object functions
- msm: Use GEM object functions
- nouveau: Cleanups; TTM-related changes; Use GEM object functions
- omapdrm: Use GEM object functions
- panel: Add driver and DT bindings for Novatak nt36672a; Add driver and DT
bindings for YTC700TLAG-05-201C; Add driver and DT bindings for TDO TL070WSH30;
Cleanups
- panel/mantix: Fix reset; Fix deref of NULL pointer in mantix_get_modes()
- panel/otm8009a: Allow non-continuous dsi clock; Cleanups
- panel/rm68200: Allow non-continuous dsi clock; Fix mode to 50 FPS
- panfrost: Fix job timeout handling; Cleanups
- pl111: Use GEM object functions
- qxl: Cleanups; TTM-related changes; Pin new BOs with ttm_bo_init_reserved()
- radeon: Cleanups; TTM-related changes; Use GEM object functions
- rockchip: Use GEM object functions
- shmobile: Cleanups
- tegra: Use GEM object functions
- tidss: Set drm_plane_helper_funcs.prepare_fb
- tilcdc: Don't keep vblank interrupt enabled all the time
- tve200: Detect platform_get_irq() errors
- vc4: Use GEM object functions; Only register components once DSI is attached;
Add Maxime as maintainer
- vgem: Use GEM object functions
- via: Simplify critical section in via_mem_alloc()
- virtgpu: Use GEM object functions
- virtio: Implement blob resources, host-visible and cross-device features;
Support mapping of host-allocated resources; Use UUID APi; Cleanups
- vkms: Use GEM object functions; Switch to SHMEM
- vmwgfx: TTM-related changes; Inline ttm_bo_swapout_all()
- xen: Use GEM object functions
- xlnx: Use GEM object functions
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027100936.GA4858@linux-uq9g
|
|
General code indentation and alignment changes such as replace spaces
by tabs or align function arguments as per the coding style
guidelines. The patch corrects issues for various amdgpu_*.c files
for this driver. Issue reported by checkpatch script.
Signed-off-by: Deepak R Varma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
loaded fw can be queried from sys fs interface
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: John Clements <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Create new debugfs entry to print memory info using VM buffer
objects.
V2: Added Common function for printing BO info.
Dump more VM lists for evicted, moved, relocated, invalidated.
Removed dumping VM mapped BOs.
V3: Fixed coding style comments, renamed print API and variables.
V4: Fixed coding style comments.
Signed-off-by: Mihir Bhogilal Patel <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Make it more clear what the resource manager function
does and nuke the wrapper function.
v2: nuke the wrapper
v3: fix typo in radeon, rebased
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]> (v2)
Link: https://patchwork.freedesktop.org/patch/393914/
|
|
support both direct and indirect accessor in unified
helper functions.
v2: Retire indirect mmio access via mm_index/data
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Kevin Wang <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add a static inline adev_to_drm() to obtain
the DRM device pointer from an amdgpu_device pointer.
Signed-off-by: Luben Tuikov <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|