aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
AgeCommit message (Collapse)AuthorFilesLines
2023-08-07drm/amdgpu: Fix style issues in amdgpu_debugfs.cPraful Swarnakar1-1/+2
Fixes the following to align to linux coding style: WARNING: Missing a blank line after declarations WARNING: sizeof *rd should be sizeof(*rd) Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Guchun Chen <[email protected]> Signed-off-by: Praful Swarnakar <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Srinivasan Shanmugam <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-18drm/amdgpu: Add RLCG interface driver implementation for gfx v9.4.3 (v3)Victor Lu1-2/+2
Add RLCG interface support for gfx v9.4.3 and multiple XCCs. Do not enable it yet. v2: Fix amdgpu_rlcg_reg_access_ctrl init, add support for multiple XCCs in amdgpu_mm_wreg_mmio_rlc v3: Use GET_INST() when indexing amdgpu_rlcg_reg_access_ctrl Signed-off-by: Victor Lu <[email protected]> Reviewed-by: Zhigang Luo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-09drm/amd/amdgpu: Fix up locking etc in amdgpu_debugfs_gprwave_ioctl()Dan Carpenter1-4/+5
There are two bugs here. 1) Drop the lock if copy_from_user() fails. 2) If the copy fails then the correct error code is -EFAULT instead of -EINVAL. I also broke up the long line and changed "sizeof rd->id" to "sizeof(rd->id)". Fixes: 553f973a0d7b ("drm/amd/amdgpu: Update debugfs for XCC support (v3)") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-09drm/amdgpu: remove unnecessary (void*) conversionsSu Hui1-2/+2
No need cast (void*) to (struct amdgpu_device *). Signed-off-by: Su Hui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-09drm/amd/amdgpu: Update debugfs for XCC support (v3)Tom St Denis1-18/+184
This patch updates the 'regs2' interface for MMIO registers to add a new IOCTL command for a 'v2' state data that includes the XCC ID. This patch then updates amdgpu_gfx_select_se_sh() and amdgpu_gfx_select_me_pipe_q() (and the implementations in the gfx drivers) to support an additional parameter. This patch then creates a new debugfs interface "gprwave" which is a merge of shader GPR and wave status access. This new inteface uses an IOCTL to select banks as well as XCC identity. (v2) Fix missing xcc_id in wave_ind function (v3) Fix pm runtime calls and mutex locking (v4) Fix bad label Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-09drm/amd/amdgpu: Fix style problems in amdgpu_debugfs.cSrinivasan Shanmugam1-13/+15
Fix the following issues reported by checkpatch: WARNING: please, no space before tabs WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: sizeof *rd should be sizeof(*rd) WARNING: Missing a blank line after declarations WARNING: sizeof rd->id should be sizeof(rd->id) WARNING: static const char * array should probably be static const char * const WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'. WARNING: Prefer seq_puts to seq_printf ERROR: space prohibited after that open parenthesis '(' Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-04-18drm/amdgpu: add xcc index argument to select_sh_se function v2Le Ma1-8/+8
v1: To support multiple XCD case (Le) v2: introduce xcc index to gfx_v11_0_select_sh_se (Hawking) Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-12-06drm/ttm: remove ttm_bo_(un)lock_delayed_workqueueChristian König1-5/+1
Those functions never worked correctly since it is still perfectly possible that a buffer object is released and the background worker restarted even after calling them. Signed-off-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Reviewed-by: Arunpravin Paneer Selvam <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-11-15drm/amdgpu: clarify DC checksAlex Deucher1-1/+1
There are several places where we don't want to check if a particular asic could support DC, but rather, if DC is enabled. Set a flag if DC is enabled and check for that rather than if a device supports DC or not. Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18Revert "drm/amdgpu: add debugfs amdgpu_reset_level"Victor Zhao1-2/+0
This reverts commit 5bd8d53f6fa53eab5433698d1362dae2aa53c1cc. This commit breaks the reset logic for aldebaran, revert it for now. Will move the mask inside the reset handler. Fixes: 5bd8d53f6fa53e ("drm/amdgpu: add debugfs amdgpu_reset_level") Signed-off-by: Victor Zhao <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd: Add detailed GFXOFF stats to debugfsAndré Almeida1-0/+168
Add debugfs interface to log GFXOFF statistics: - Read amdgpu_gfxoff_count to get the total GFXOFF entry count at the time of query since system power-up - Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop. Read it to get average GFXOFF residency % multiplied by 100 during the last logging interval. Both features are designed to be keep the values persistent between suspends. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: add debugfs amdgpu_reset_levelVictor Zhao1-0/+2
Introduce amdgpu_reset_level debugfs in order to help debug and test specific type of reset. Also helps blocking unwanted type of resets. By default, mode2 reset will not be enabled v2: make this debugfs in adev and use debugfs_create_u32 Signed-off-by: Victor Zhao <[email protected]> Acked-by: Andrey Grodzovsky <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-10drm/amdgpu: double free error and freeing uninitialized null pointerSebin Sebastian1-2/+3
Fix a double free and an uninitialized pointer read error. Both tmp and new are pointing at same address and both are freed which leads to double free. Adding a check to verify if new and tmp are free in the error_free label fixes the double free issue. new is not initialized to null which also leads to a free on an uninitialized pointer. Reviewed-by: André Almeida <[email protected]> Suggested by: S. Amaranath <[email protected]> Signed-off-by: Sebin Sebastian <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-07-25drm/amd/debugfs: Expose GFXOFF state to userspaceAndré Almeida1-2/+47
GFXOFF has two different "state" values: one to define if the GPU is allowed/disallowed to enter GFXOFF, usually called state; and another one to define if currently GFXOFF is being used, usually called status. Even when GFXOFF is allowed, GPU firmware can decide to not used it accordingly to the GPU load. Userspace can allow/disallow GPUs to enter into GFXOFF via debugfs. The kernel maintains a counter of requests for GFXOFF (gfx_off_req_count) that should be decreased to allow GFXOFF and increased to disallow. The issue with this interface is that userspace can't be sure if GFXOFF is currently allowed. Even by checking amdgpu_gfxoff file, one might get an ambiguous 2, that means that GPU is currently out of GFXOFF, but that can be either because it's currently disallowed or because it's allowed but given the current GPU load it's enabled. Then, userspace needs to rely on the fact that GFXOFF is enabled by default on boot and to track this information. To make userspace life easier and GFXOFF more reliable, return the current state of GFXOFF to userspace when reading amdgpu_gfxoff with the same semantics of writing: 0 means not allowed, not 0 means allowed. Expose the current status of GFXOFF through a new file, amdgpu_gfxoff_status. Signed-off-by: André Almeida <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-07-05drm/amdpgu/debugfs: Simplify some exit pathsAndré Almeida1-65/+42
To avoid code repetition, unify the function exit path when possible. No functional changes. Acked-by: Christian König <[email protected]> Signed-off-by: André Almeida <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-06-06drm/amdgpu: save the reset dump register value for devcoredumpSomalapuram Amaranath1-0/+7
Allocate memory for register value and use the same values for devcoredump. v1 -> v2: Change krealloc_array() to kmalloc_array() v2 -> v3: Fix alignment Signed-off-by: Somalapuram Amaranath <[email protected]> Reviewed-by: Shashank Sharma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-21drm/amdgpu: Add debugfs TA load/unload/invoke supportCandice Li1-0/+2
v1: Add debugfs support to load/unload/invoke TA in runtime. v2: 1. Update some variables to static. 2. Use PAGE_ALIGN to calculate shared buf size directly. 3. Remove fp check. 4. Update debugfs from read to write. Signed-off-by: John Clements <[email protected]> Signed-off-by: Candice Li <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-11drm/amd/amdgpu: Update debugfs GCA dataTom St Denis1-3/+4
The data revision was not changed to 5 from 4 when the CG flags were extended to 64-bits. Since this was missed I took the opportunity to add future upper 64-bits of PG flags as well so we don't need to bump it again when that comes. Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-08drm/amdgpu: expand cg_flags from u32 to u64Evan Quan1-1/+4
With this, we can support more CG flags. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-03-04drm/amdgpu/vcn: Add vcn firmware logRuijing Dong1-0/+10
vcn fwlog is for debugging purpose only, by default, it is disabled. Signed-off-by: Ruijing Dong <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-03-02drm/amdgpu: Fix realloc of ptrTom Rix1-2/+7
Clang static analysis reports this error amdgpu_debugfs.c:1690:9: warning: 1st function call argument is an uninitialized value tmp = krealloc_array(tmp, i + 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~ realloc uses tmp, so tmp can not be garbage. And the return needs to be checked. Fixes: 5ce5a584cb82 ("drm/amdgpu: add debugfs for reset registers list") Reviewed-by: Christian König <[email protected]> Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-03-01Merge tag 'amd-drm-next-5.18-2022-02-25' of ↵Dave Airlie1-0/+105
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.18-2022-02-25: amdgpu: - Raven2 suspend/resume fix - SDMA 5.2.6 updates - VCN 3.1.2 updates - SMU 13.0.5 updates - DCN 3.1.5 updates - Virtual display fixes - SMU code cleanup - Harvest fixes - Expose benchmark tests via debugfs - Drop no longer relevant gart aperture tests - More RAS restructuring - W=1 fixes - PSR rework - DP/VGA adapter fixes - DP MST fixes - GPUVM eviction fix - GPU reset debugfs register dumping support - Misc display fixes - SR-IOV fix - Aldebaran mGPU fix - Add module parameter to disable XGMI for testing amdkfd: - IH ring overflow logging fixes - CRIU fixes - Misc fixes Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-25Merge tag 'drm-misc-next-2022-02-23' of ↵Dave Airlie1-4/+6
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Split out panel-lvds and lvds dt bindings . - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h and use it in drivers and tomoyo. - Clarify dma_fence_chain and dma_fence_array should never include eachother. - Flatten chains in syncobj's. - Don't double add in fbdev/defio when page is already enlisted. - Don't sort deferred-I/O pages by default in fbdev. Core Changes: - Fix missing pm_runtime_put_sync in bridge. - Set modifier support to only linear fb modifier if drivers don't advertise support. - As a result, we remove allow_fb_modifiers. - Add missing clear for EDID Deep Color Modes in drm_reset_display_info. - Assorted documentation updates. - Warn once in drm_clflush if there is no arch support. - Add missing select for dp helper in drm_panel_edp. - Assorted small fixes. - Improve fb-helper's clipping handling. - Don't dump shmem mmaps in a core dump. - Add accounting to ttm resource manager, and use it in amdgpu. - Allow querying the detected eDP panel through debugfs. - Add helpers for xrgb8888 to 8 and 1 bits gray. - Improve drm's buddy allocator. - Add selftests for the buddy allocator. Driver Changes: - Add support for nomodeset to a lot of drm drivers. - Use drm_module_*_driver in a lot of drm drivers. - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau, bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86. - Add bridge/it6505. - Create DP and DVI-I connectors in ast. - Assorted nouveau backlight fixes. - Rework amdgpu reset handling. - Add dt bindings for ingenic,jz4780-dw-hdmi. - Support reading edid through aux channel in ingenic. - Add a drm driver for Solomon SSD130x OLED displays. - Add simple support for sharp LQ140M1JW46. - Add more panels to nt35560. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-23drm/amdgpu: add debugfs for reset registers listSomalapuram Amaranath1-0/+82
List of register populated for dump collection during the GPU reset. Signed-off-by: Somalapuram Amaranath <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-23drm/amdgpu: expose benchmarks via debugfsAlex Deucher1-0/+23
They provide a nice smoke test of transfer performance using SDMA. Allow the user to run these at runtime rather than only at init time. v2: fix permissions (Alex) Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-17drm/amd/amdgpu: Add APU flag to gca_config debugfs data (v3)Tom St Denis1-1/+4
Needed by umr to detect if ip discovered ASIC is an APU or not. (v2): Remove asic type from packet it's not strictly needed (v3): Correct comment Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-09drm/amdgpu: Move reset sem into reset_domainAndrey Grodzovsky1-4/+6
We want single instance of reset sem across all reset clients because in case of XGMI we should stop access cross device MMIO because any of them could be in a reset in the moment. Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://www.spinics.net/lists/amd-gfx/msg74117.html
2022-01-18drm/amdgpu: Add missing pm_runtime_put_autosuspendYongzhi Liu1-1/+3
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, thus a matching decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Yongzhi Liu <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-01-14drm/amd/pm: do not expose implementation details to other blocks out of powerEvan Quan1-11/+14
Those implementation details(whether swsmu supported, some ppt_funcs supported, accessing internal statistics ...)should be kept internally. It's not a good practice and even error prone to expose implementation details. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-14drm/amdgpu: move smu_debug_mask to a more proper placeEvan Quan1-1/+1
As the smu_context will be invisible from outside(of power). Also, the smu_debug_mask can be shared around all power code instead of some specific framework(swSMU) only. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-13drm/amdgpu: add support for SMU debug optionLang Yu1-0/+3
SMU firmware expects the driver maintains error context and doesn't interact with SMU any more when SMU errors occurred. That will aid in debugging SMU firmware issues. Add SMU debug option support for this request, it can be enabled or disabled via amdgpu_smu_debug debugfs file. Use a 32-bit mask to indicate corresponding debug modes. Currently, only one mode(HALT_ON_ERROR) is supported. When enabled, it brings hardware to a kind of halt state so that no one can touch it any more in the envent of SMU errors. The dirver interacts with SMU via sending messages. And threre are three ways to sending messages to SMU in current implementation. Handle them respectively as following: 1, smu_cmn_send_smc_msg_with_param() for normal timeout cases Halt on any error. 2, smu_cmn_send_msg_without_waiting()/smu_cmn_wait_for_response() for longer timeout cases Halt on errors apart from ETIME. Otherwise this way won't work. Let the user handle ETIME error in such a case. 3, smu_cmn_send_msg_without_waiting() for no waiting cases Halt on errors apart from ETIME. Otherwise second way won't work. == Command Guide == 1, enable HALT_ON_ERROR mode # echo 0x1 > /sys/kernel/debug/dri/0/amdgpu_smu_debug 2, disable HALT_ON_ERROR mode # echo 0x0 > /sys/kernel/debug/dri/0/amdgpu_smu_debug v5: - Use bit mask to allow more debug features.(Evan) - Use WRAN() instead of BUG().(Evan) v4: - Set to halt state instead of a simple hang.(Christian) v3: - Use debugfs_create_bool().(Christian) - Put variable into smu_context struct. - Don't resend command when timeout. v2: - Resend command when timeout.(Lijo) - Use debugfs file instead of module parameter. Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-07drm/amdgpu: unify BO evicting method in amdgpu_ttmNirmoy Das1-5/+3
Unify BO evicting functionality for possible memory types in amdgpu_ttm.c. Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-06drm/amdgpu: return early if debugfs is not initializedNirmoy Das1-0/+3
Check first if debugfs is initialized before creating amdgpu debugfs files. References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686 Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-05drm/amdgpu: revert "Add autodump debugfs node for gpu reset v8"Christian König1-80/+0
This reverts commit 728e7e0cd61899208e924472b9e641dbeb0775c4. Further discussion reveals that this feature is severely broken and needs to be reverted ASAP. GPU reset can never be delayed by userspace even for debugging or otherwise we can run into in kernel deadlocks. Signed-off-by: Christian König <[email protected]> Acked-by: Alex Deucher <[email protected]> Acked-by: Nirmoy Das <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-04drm/amdgpu: add debugfs access to the IP discovery tableAlex Deucher1-0/+5
Useful for debugging and new asic validation. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-09-14drm/amdgpu: Fix a race of IB testxinhui pan1-2/+2
Direct IB submission should be exclusive. So use write lock. Signed-off-by: xinhui pan <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-09-14drm/amdgpu: cleanup debugfs for amdgpu ringsNirmoy Das1-3/+1
Use debugfs_create_file_size API for creating ring debugfs, and as its a NULL returning API, change the return type for amdgpu_debugfs_ring_init API as well. Also cleanup surrounding code. Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Shashank Sharma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-09-14drm/amdgpu: use IS_ERR for debugfs APIsNirmoy Das1-6/+4
debugfs APIs returns encoded error so use IS_ERR for checking return value. v2: return PTR_ERR(ent) References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686 Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Reviewed-By: Shashank Sharma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-09-01drm/amd/amdgpu: New debugfs interface for MMIO registers (v5)Tom St Denis1-0/+152
This new debugfs interface uses an IOCTL interface in order to pass along state information like SRBM and GRBM bank switching. This new interface also allows a full 32-bit MMIO address range which the previous didn't. With this new design we have room to grow the flexibility of the file as need be. (v2): Move read/write to .read/.write, fix style, add comment for IOCTL data structure (v3): C style comments (v4): use u32 in struct and remove offset variable (v5): Drop flag clearing in op function, use 0xFFFFFFFF for broadcast instead of 0x3FF, use mutex for op/ioctl. Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-08-16drm/amd/amdgpu embed hw_fence into amdgpu_jobJack Zhang1-1/+1
Why: Previously hw fence is alloced separately with job. It caused historical lifetime issues and corner cases. The ideal situation is to take fence to manage both job and fence's lifetime, and simplify the design of gpu-scheduler. How: We propose to embed hw_fence into amdgpu_job. 1. We cover the normal job submission by this method. 2. For ib_test, and submit without a parent job keep the legacy way to create a hw fence separately. v2: use AMDGPU_FENCE_FLAG_EMBED_IN_JOB_BIT to show that the fence is embedded in a job. v3: remove redundant variable ring in amdgpu_job v4: add tdr sequence support for this feature. Add a job_run_counter to indicate whether this job is a resubmit job. v5 add missing handling in amdgpu_fence_enable_signaling Signed-off-by: Jingwen Chen <[email protected]> Signed-off-by: Jack Zhang <[email protected]> Reviewed-by: Andrey Grodzovsky <[email protected]> Reviewed by: Monk Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-06-15drm/amdgpu: remove amdgpu_vm_ptNirmoy Das1-2/+2
Page table entries are now in embedded in VM BO, so we do not need struct amdgpu_vm_pt. This patch replaces struct amdgpu_vm_pt with struct amdgpu_vm_bo_base. Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-05-21drm/amd/amdgpu/amdgpu_debugfs: Fix a couple of misnamed functionsLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1004: warning: expecting prototype for amdgpu_debugfs_regs_gfxoff_write(). Prototype was for amdgpu_debugfs_gfxoff_write() instead drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1053: warning: expecting prototype for amdgpu_debugfs_regs_gfxoff_status(). Prototype was for amdgpu_debugfs_gfxoff_read() instead Cc: Alex Deucher <[email protected]> Cc: "Christian König" <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-03-03drm/amdgpu: fix parameter error of RREG32_PCIE() in amdgpu_regs_pcieKevin Wang1-2/+2
the register offset isn't needed division by 4 to pass RREG32_PCIE() Signed-off-by: Kevin Wang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-02-26drm/amdgpu: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTEYang Li1-2/+2
Fix the following coccicheck warning: ./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1589:0-23: WARNING: fops_ib_preempt should be defined with DEFINE_DEBUGFS_ATTRIBUTE ./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1592:0-23: WARNING: fops_sclk_set should be defined with DEFINE_DEBUGFS_ATTRIBUTE Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-02-18drm/amdgpu: do not use drm middle layer for debugfsNirmoy Das1-107/+49
Use debugfs API directly instead of drm middle layer. This also includes following debugfs file output changes: 1 amdgpu_evict_vram/amdgpu_evict_gtt output will not contain any braces. e.g. (0) --> 0 2 amdgpu_gpu_recover output will print return value of amdgpu_device_gpu_recover() instead of not so important "gpu recover" message. v2: * checkpatch.pl: use '0444' instead of S_IRUGO. * remove S_IFREG from mode. * remove mode variable. Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-02-18drm/amd/pm: do not use drm middle layer for debugfsNirmoy Das1-5/+1
Use debugfs API directly instead of drm middle layer. v2: * checkpatch.pl: use '0444' instead of S_IRUGO. * remove S_IFREG from mode. * remove mode variable. Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-02-18drm/amd/display: do not use drm middle layer for debugfsNirmoy Das1-4/+2
Use debugfs API directly instead of drm middle layer. v2: * checkpatch.pl: use '0444' instead of S_IRUGO. * remove S_IFREG from mode. * remove mode variable. Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-02-18drm/amdgpu: do not keep debugfs dentryNirmoy Das1-11/+9
Cleanup unnecessary debugfs dentries and surrounding functions. v3: remove return value check for debugfs_create_file() v2: remove ttm_debugfs_entries array. do not init variables. Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-20Merge tag 'amd-drm-next-5.12-2021-01-20' of ↵Daniel Vetter1-0/+3
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.12-2021-01-20: amdgpu: - Fix non-x86 build - W=1 fixes from Lee Jones - Enable GPU reset on Navy Flounder - Kernel doc fixes - SMU workload profile fixes for APUs - Display updates - SR-IOV fixes - Vangogh SMU feature enablment and bug fixes - GPU reset support for Vangogh - Misc cleanups Conflicts: drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c Resolve the conflict by picking the initialization value from amd from f03e80d2e82c ("drm/amd/display: Initialize stack variable") over the one Linus picked in 61d791365b72 ("drm/amd/display: avoid uninitialized variable warning"). It shouldn't matter. From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Daniel Vetter <[email protected]>
2021-01-13drm/amdgpu: Add secure display TA interfaceJinzhou Su1-0/+3
Add interface to load, unload, invoke command for secure display TA. v2: Add debugfs interface for secure display TA v3: fix warning in copy_from_user (Alex) Signed-off-by: Jinzhou.Su <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.