aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu.h
AgeCommit message (Collapse)AuthorFilesLines
2019-07-16drm/amdkfd: Consistently apply noretry settingFelix Kuehling1-0/+1
Apply the same setting to SH_MEM_CONFIG and VM_CONTEXT1_CNTL. This makes the noretry param no longer KFD-specific. On GFX10 I'm not changing SH_MEM_CONFIG in this commit because GFX10 has different retry behaviour in the SQ and I don't have a way to test it at the moment. Suggested-by: Christian König <[email protected]> CC: Philip Yang <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by : Shaoyun.liu < [email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-01drm/amdgpu: add field indicating if has PCIE atomics supportJack Xiao1-0/+1
The new field in amdgpu device is used to record whether the system has PCIE atomics support. The field can be exposed to UMD or kfd whether PCIE atomics have supported. Signed-off-by: Jack Xiao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-07-01drm/amdgpu: fix MGPU fan boost enablement for XGMI resetEvan Quan1-0/+4
MGPU fan boost feature should not be enabled until all the devices from the same hive are all back from reset. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-25Merge branch 'drm-next' into drm-next-5.3Alex Deucher1-2/+2
Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <[email protected]>
2019-06-22drm/amdgpu: drop unused df init callbackAlex Deucher1-1/+0
It was replaced with the sw_init callback so is no longer needed. Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu/mes: add mes header file and definitionJack Xiao1-0/+5
Add dummy header file and definitions of mes. Acked-by: Hawking Zhang <[email protected]> Signed-off-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu/mes: add amdgpu_mes driver parameterJack Xiao1-0/+1
amdgpu_mes, which is a driver scope parameter, is used to whether enable mes or not. MES (Micro Engine Scheduler) is the new on chip hw scheduling microcontroller. It can be used to handle queue scheduling and preemption and priorities. Acked-by: Hawking Zhang <[email protected]> Signed-off-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu/discovery: add module param for ip discovery enablementXiaojie Yuan1-0/+1
to control enablement. Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu/discovery: add ip discovery initial supportXiaojie Yuan1-0/+4
The IP discovery table lists is populated by the psp at power on and includes all of the hw details on the board: - List of IPs and MMIO offsets - IP harvest details - IP configuration details v2: prefix struct and function names with 'amdgpu' v3: read table binary from vram using mmMM_INDEX and mmMM_DATA update TABLE_BINARY_MAX_SIZE to 64kb (1 TMR) add 'instance_number' field per ip info consider endianness and replace uint8/16/32_t with u8/16/32 initialize register base addresses initialize adev->gfx.config and adev->gfx.cu_info to replace gpu info fw get major and minor version using a single api don't expose internal data structures in amdgpu_discovery.h v4: RCC_CONFIG_MEMSIZE is in MB units hold mmio_idx_lock while reading ip discovery binary v5: pick out discovery.h as a cross-OS header do structure pointer cast directly consider endianness while using the member of structure convert base addresses to dword at boot up, PSP BL copies ip discovery binary from VBIOS(SPIROM) image to the top of the frame buffer (just below the reserved regions for PSP & SMU). ip discovery data table includes the collection of each ip's identification number, base addresses, version number, and harvest setting placeholder. gc data table includes gfx info structure. Signed-off-by: Xiaojie Yuan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu: add mcbp unit test in debugfs (v3)Jack Xiao1-0/+1
The MCBP unit test is used to test the functionality of MCBP. It emualtes to send preemption request and resubmit the unfinished jobs. v2: squash in fixes (Alex) v3: squash in memory leak fix (Jack) Acked-by: Hawking Zhang <[email protected]> Signed-off-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-21drm/amdgpu: add mcbp driver parameterJack Xiao1-0/+1
Add mcbp driver parameter, so that mcbp feature can be enabled/disabled by driver parameter. Acked-by: Hawking Zhang <[email protected]> Signed-off-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: add module parameter for async_gfx_ring enablementHawking Zhang1-0/+1
0 means disable async_gfx_ring and is the default setting 1 means enable async_gfx_ring Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Jack Xiao <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: enable gfx eop interrupt per gfx pipeHawking Zhang1-1/+2
Navi10 has 2 gfx pipe and need to enable gfx eop interrupt per pipe, instead of enable eop int for all gfx pipes at one time. Signed-off-by: Hawking Zhang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: add nbio callbacks for vcn doorbell supportLeo Liu1-0/+2
For Navi10 VCN2.0, the engine supports Doorbell Signed-off-by: Leo Liu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-20drm/amdgpu: update df_v3_6 for xgmi perfmons (v2)Jonathan Kim1-0/+18
add pmu attribute groups and structures for perf events. add sysfs to track available df perfmon counters fix overflow handling in perfmon counter reads. v2: squash in fix (Alex) Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-14Merge tag 'drm-misc-next-2019-06-14' of ↵Daniel Vetter1-2/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3: UAPI Changes: Cross-subsystem Changes: - Add code to signal all dma-fences when freed with pending signals. - Annotate reservation object access in CONFIG_DEBUG_MUTEXES Core Changes: - Assorted documentation fixes. - Use irqsave/restore spinlock to add crc entry. - Move code around to drm_client, for internal modeset clients. - Make drm_crtc.h and drm_debugfs.h self-contained. - Remove drm_fb_helper_connector. - Add bootsplash to todo. - Fix lock ordering in pan_display_legacy. - Support pinning buffers to current location in gem-vram. - Remove the now unused locking functions from gem-vram. - Remove the now unused kmap-object argument from vram helpers. - Stop checking return value of debugfs_create. - Add atomic encoder enable/disable helpers. - pass drm_atomic_state to atomic connector check. - Add atomic support for bridge enable/disable. - Add self refresh helpers to core. Driver Changes: - Add extra delay to make MTP SDM845 work. - Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip. - Add zpos and ?BGR8888 support to meson. - More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis. - Allow synopsis to unwedge the i2c hdmi bus. - Add orientation quirks for GPD panels. - Edid cleanups and fixing handling for edid < 1.2. - Add runtime pm to stm. - Handle s/r in dw-hdmi. - Add hooks for power on/off to dsi for stm. - Remove virtio dirty tracking code, done in drm core. - Rework BO handling in ast and mgag200. Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c, needed #include <linux/slab.h> to make it compile. Signed-off-by: Daniel Vetter <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-11drm/amdgpu: Add module parameter for specifying default ABM levelNicholas Kazlauskas1-0/+1
[Why] It's non trivial to configure or specify an ABM reduction level for userspace outside of X. There is also no method to specify the default ABM value at boot time. A parameter should be added to configure this. [How] Expose a module parameter that can specify the default ABM level to use for eDP connectors on DC enabled hardware that loads the DMCU firmware. The default is still disabled (0), but levels can range from 1-4. Levels control how much the backlight can be reduced, with being the least amount of reduction and four being the most reduction. Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: David Francis <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-11drm/amd/amdgpu: remove vram_page_split kernel option (v3)Tom St Denis1-1/+0
This option is no longer needed. The default code paths are now the only option. v2: Add HPAGE support and a default for non contiguous maps v3: Misread 512 pages as MiB ... Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-06-10drm/amd: drop use of drmP.h in amdgpu.hSam Ravnborg1-2/+2
Delete the unused drmP.h from amdgpu.h. Fix fallout in various files. Signed-off-by: Sam Ravnborg <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Cc: "Christian König" <[email protected]> Cc: "David (ChunMing) Zhou" <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-05drm/amdgpu: fix a race in GPU reset with IB test (v2)Alex Deucher1-1/+1
Split late_init into two functions, one (do_late_init) which just does the hw init, and late_init which calls do_late_init and schedules the IB test work. Call do_late_init in the GPU reset code to run the init code, but not schedule the IB test code. The IB test code is called directly in the gpu reset code so no need to run the IB tests in a separate work thread. If we do, we end up racing. v2: Rework late_init. Pull out the mgpu fan boost and xgmi pstate code into late_init so they get called in all cases. rename the late_init worker thread to delayed work since it's just the IB tests now which can happen later. Schedule the work at init and resume time. It's not needed at reset time because the IB tests are called directly. Reviewed-by: Christian König <[email protected]> Cc: Xinhui Pan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-05-24drm/amdgpu: Add Unique Identifier sysfs file unique_id v2Kent Russell1-0/+2
Add a file that provides a Unique ID for the GPU. This will persist across machines and is guaranteed to be unique. This is only available for GFX9 and newer, so older ASICs will not have this file in the sysfs pool v2: Store it in adev for ASICs that don't have a hwmgr Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Kent Russell <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-05-24drm/amdgpu: add df perfmon regs and funcs for xgmiJonathan Kim1-0/+10
v6: Squash in warning fix (Colin Ian King) v5: Fix warnings (Alex) v4: fixed mixed delaration and code warnings and minor errors v3: exposing df funcs in amdgpu_df_funcs in amdgpu.h v2: moving permonctl/perfmonctr from default to offset - adding df perfmonctl and perfmonctr registers for df counters - adding df funcs to set perfmonctl and get perfmonctr for df and xgmi counters - exposing df funcs in amdgpu_df_funcs Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-05-24drm/amdgpu: Add PCIe replay count sysfs fileKent Russell1-0/+3
Add a sysfs file for reporting the number of PCIe replays (NAKs). This returns the sum of NAKs received and NAKs generated Signed-off-by: Kent Russell <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-05-24drm/amdgpu: enable separate timeout setting for every ring type V4Evan Quan1-1/+6
Every ring type can have its own timeout setting. - V2: update lockup_timeout parameter format and cosmetic fixes - V3: invalidate 0 and negative values - V4: update lockup_timeout parameter format Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-05-24drm/amdgpu: Remap hdp coherency registersOak Zeng1-0/+7
Remap HDP_MEM_COHERENCY_FLUSH_CNTL and HDP_REG_COHERENCY_FLUSH_CNTL to an empty page in mmio space. We will later map this page to process space so application can flush hdp. This can't be done properly at those registers' original location because it will expose more than desired registers to process space. v2: Use explicit register hole location v3: Moved remapped hdp registers into adev struct v4: Use more generic name for remapped page Expose register offset in kfd_ioctl.h v5: Move hdp register remap function to nbio ip function v6: Fixed operator precedence issue and other bugs Signed-off-by: Oak Zeng <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-04-12drm/amdgpu: add timeline support in amdgpu CS v3Chunming Zhou1-2/+8
syncobj wait/signal operation is appending in command submission. v2: separate to two kinds in/out_deps functions v3: fix checking for timeline syncobj Signed-off-by: Chunming Zhou <[email protected]> Cc: Tobias Hector <[email protected]> Cc: Jason Ekstrand <[email protected]> Cc: Dave Airlie <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Lionel Landwerlin <[email protected]> Reviewed-by: Lionel Landwerlin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-04-03drm/amd/display: In VRR mode, do DRM core vblank handling at end of vblank. (v2)Mario Kleiner1-0/+1
In VRR mode, proper vblank/pageflip timestamps can only be computed after the display scanout position has left front-porch. Therefore delay calls to drm_crtc_handle_vblank(), and thereby calls to drm_update_vblank_count() and pageflip event delivery, to after the end of front-porch when in VRR mode. We add a new vupdate irq, which triggers at the end of the vupdate interval, ie. at the end of vblank, and calls the core vblank handler function. The new irq handler is not executed in standard non-VRR mode, so vblank handling for fixed refresh rate mode is identical to the past implementation. v2: Implement feedback by Nicholas and Paul Menzel. Signed-off-by: Mario Kleiner <[email protected]> Acked-by: Harry Wentland <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-03-21drm/amdgpu: revert "XGMI pstate switch initial support"Christian König1-3/+0
This reverts commit 9b638f9751308ae3ae8f28e0c6e9decffd97f5f9. Adding this to the mapping is complete nonsense and the whole implementation looks racy. This patch wasn't thoughtfully reviewed and should be reverted for now. Signed-off-by: Christian König <[email protected]> Acked-by: Liu, Shaoyun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-03-19drm/amdgpu: add module parameters for rasxinhui pan1-0/+2
Allow RAS feature enable/disable via boot parameter. Signed-off-by: xinhui pan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-03-19drm/amd/powerplay: apply Vega20 BACO workaroundEvan Quan1-0/+1
Applied vdci flush workaround for Vega20 BACO. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-03-19drm/amdgpu: XGMI pstate switch initial supportshaoyunl1-0/+4
Driver vote low to high pstate switch whenever there is an outstanding XGMI mapping request. Driver vote high to low pstate when all the outstanding XGMI mapping is terminated. Signed-off-by: shaoyunl <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-03-19drm/amd/powerplay: add limit of pp_feature for smu (v3)Likun Gao1-1/+0
Move pp_feature from the struct of amd_powerplay to amdgpu_device. Add pp_feature limit for overdrive interface. v2: put pp_feature into struct amdgpu_pm. v3: merge feature_mask with pp_feature. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Suggested-by: Alex Deucher <[email protected]> Suggested-by: Huang Rui <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-03-19drm/amd/powerplay: add new smu ip blockHuang Rui1-0/+4
This patch add amdgpu_smu ip block skeleton as placeholder. We plan use new smu ip block from Vega20. Signed-off-by: Huang Rui <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-02-15drm/amdgpu: Check if fd really is an amdgpu fd.Bas Nieuwenhuizen1-0/+2
Otherwise we interpret the file private data as drm & amdgpu data while it might not be, possibly allowing one to get memory corruption. Signed-off-by: Bas Nieuwenhuizen <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-01-25drm/amdgpu: Fix sdma doorbell range settingOak Zeng1-1/+1
Different ASIC has different SDMA queue number so different SDMA doorbell range. Introduce an extra parameter to sdma_doorbell_range function and set sdma doorbell range correctly. Signed-off-by: Oak Zeng <[email protected]> Reviewed-by: Philip Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-01-14drm/amdgpu: add need_reset_on_init asic callback (v2)Alex Deucher1-0/+3
Used to determine if we need to reset the asic on init due to the driver having been previously loaded or not shutdown cleanly. E.g., kexec or VM passthrough. v2: rebase Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-01-14drm/amdgpu: Add sysfs file for PCIe usage v5Kent Russell1-0/+4
Add a sysfs file that reports the number of bytes transmitted and received in the last second. This can be used to approximate the PCIe bandwidth usage over the last second. v2: Clarify use of mps as estimation of bandwidth v3: Don't make the file on APUs v4: Early exit for APUs in the read function, change output to display "packets-received packets-sent mps" v5: fix missing header for si (Alex) Signed-off-by: Kent Russell <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-12-25Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-137/+17
Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...
2018-12-10drm/amdgpu: Limit vm max ctx number to 4096Rex Zhu1-0/+1
driver need to reserve resource for each ctx for some hw features. so add this limitation. Reviewed-by: Christian König <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-12-07drm/amdgpu: Add KFD VRAM limit checkingFelix Kuehling1-3/+4
We don't want KFD processes evicting each other over VRAM usage. Therefore prevent overcommitting VRAM among KFD applications with a per-GPU limit. Also leave enough room for page tables on top of the application memory usage. Acked-by: Alex Deucher <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-12-04drm/amdgpu: enlarge maximum waiting time of KIQwentalou1-1/+1
KIQ in VF’s init delayed by another VF’s reset, which would cause late_init failed occasionally. MAX_KIQ_REG_TRY enlarged from 20 to 80 would fix this issue. Reviewed-by: Christian König <[email protected]> Signed-off-by: Wentao Lou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-12-03drm/amdgpu: Implement concurrent asic reset for XGMI.Andrey Grodzovsky1-0/+2
Use per hive wq to concurrently send reset commands to all nodes in the hive. v2: Switch to system_highpri_wq after dropping dedicated queue. Fix non XGMI code path KASAN error. Stop the hive reset for each node loop if there is a reset failure on any of the nodes. Signed-off-by: Andrey Grodzovsky <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-28drm/amdgpu: Refactor GPU reset for XGMI hive caseAndrey Grodzovsky1-0/+1
For XGMI hive case do reset in steps where each step iterates over all devs in hive. This especially important for asic reset since all PSP FW in hive must come up within a limited time (around 1 sec) to properply negotiate the link. Do this by refactoring amdgpu_device_gpu_recover and amdgpu_device_reset into pre_asic_reset, asic_reset and post_asic_reset functions where is part is exectued for all the GPUs in the hive before going to the next step. v2: Update names for amdgpu_device_lock/unlock functions. v3: Introduce per hive locking to avoid multiple resets for GPUs in same hive. v4: Remove delayed_workqueue()/ttm_bo_unlock_delayed_workqueue() - they are copy & pasted over from radeon and on amdgpu there isn't any reason for that any more. Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-28drm/amdgpu: Refactor amdgpu_xgmi_add_deviceAndrey Grodzovsky1-6/+0
This is prep work for updating each PSP FW in hive after GPU reset. Split into build topology SW state and update each PSP FW in the hive. Save topology and count of XGMI devices for reuse. v2: Create seperate header for XGMI. Signed-off-by: Andrey Grodzovsky <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-28drm/amdgpu: Move doorbell structures to seperate fileOak Zeng1-220/+1
Move doorbell structures, enum definitions and helper functions from amdgpu.h to amdgpu_doorbell.h. No functional change Signed-off-by: Oak Zeng <[email protected]> Proposed-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-28drm/amdgpu: Doorbell layout for vega20 and future asicOak Zeng1-0/+50
This introduces new doorbell layout for vega20 and future asics v2: Use enum definition instead of hardcoded value Signed-off-by: Oak Zeng <[email protected]> Suggested-by: Felix Kuehling <[email protected]> Suggested-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-28drm/amdgpu: Vega10 doorbell index initializationOak Zeng1-10/+4
v2: Use enum definition instead of hardcoded value v3: Remove unused enum definition Signed-off-by: Oak Zeng <[email protected]> Suggested-by: Felix Kuehling <[email protected]> Suggested-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-28drm/amdgpu: Add asic func interface to init doorbell indexOak Zeng1-0/+3
This is preparation to move doorbell index initialization to amdgpu_asic_funcs Signed-off-by: Oak Zeng <[email protected]> Proposed-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-28drm/amdgpu: Add field in amdgpu_dev to hold reserved doorbell indexOak Zeng1-0/+50
This is a preparation work to make reserved doorbell index per device, instead of using a global macro definition. By doing this, we can easily change doorbell layout for future ASICs while not affecting ASICs in production. Signed-off-by: Oak Zeng <[email protected]> Suggested-by: Felix Kuehling <[email protected]> Suggested-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-26drm/amd: Query and use ACPI backlight capsDavid Francis1-0/+3
ACPI ATIF has a function called query backlight transfer characteristics. Among the information returned by this function is the minimum and maximum input signals for the backlight Call that function on ACPI init. When DM backlight device is updated, copy over the backlight caps into DM, but only once. Use the backlight caps in the backlight-to-dc calculation Signed-off-by: David Francis <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.