aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2018-03-26gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacksWilliam Breathitt Gray1-0/+117
The ACCES I/O PCIe-IDIO-24 series of devices provides 24 optically-isolated digital I/O accessed via six 8-bit ports. Since eight input lines are acquired on a single port input read -- and similarly eight output lines are set on a single port output write -- the PCIe-IDIO-24 GPIO driver may improve multiple I/O reads/writes by utilizing a get_multiple/set_multiple callbacks. This patch implements the idio_24_gpio_get_multiple function which serves as the respective get_multiple callback, and implements the idio_24_gpio_set_multiple function which serves as the respective set_multiple callback. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-26gpio: pci-idio-16: Implement get_multiple callbackWilliam Breathitt Gray1-0/+50
The ACCES I/O PCI-IDIO-16 series of devices provides 16 optically-isolated digital inputs accessed via two 8-bit ports. Since eight input lines are acquired on a single port input read, the PCI-IDIO-16 GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the idio_16_gpio_get_multiple function which serves as the respective get_multiple callback. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-26gpio: 104-idio-16: Implement get_multiple callbackWilliam Breathitt Gray1-0/+15
The ACCES I/O 104-IDIO-16 series of devices provides 16 optically-isolated digital inputs accessed via two 8-bit ports. Since eight input lines are acquired on a single port input read, the 104-IDIO-16 GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the idio_16_gpio_get_multiple function which serves as the respective get_multiple callback. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: ks8695: Include the right headerLinus Walleij1-1/+1
This driver is a pure GPIO driver and should only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: kempld: Include the right headerLinus Walleij1-1/+1
This driver is a pure GPIO driver and should only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: janz-ttl: Use BIT() macroLinus Walleij1-6/+7
This makes the code more readable by using the BIT() macro. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: janz-ttl: Include the right headerLinus Walleij1-1/+1
This driver is a pure GPIO driver and should only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: it87: Include the right headerLinus Walleij1-1/+1
This driver is a pure GPIO driver and should only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: ich: Use BIT() macroLinus Walleij1-8/+9
Using BIT() makes (1 << foo) constructions easier to read, and also account for common mistakes where bit 31 is not working because of numbers being interpreted as negative unless specified as unsigned. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: ich: Include the right headerLinus Walleij1-2/+2
This driver is a pure GPIO driver and should only include <linux/gpio/driver.h>. Refrain from using GPIOF_* flags in the driver, just use 1/0 to return direction. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: htc-gpio: Include the right headerLinus Walleij1-0/+1
This driver is a pure GPIO driver and should only include <linux/gpio/driver.h>. Drop the include of <linux/gpio.h> from the platform data header as well, it serves no purpose. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: grgpio: Include the right headerLinus Walleij1-2/+1
This driver is a pure GPIO driver and should only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: ftgpio010: Drop of_gpio.h includeLinus Walleij1-1/+0
This driver does not make use of the functions in <linux/of_gpio.h> so drop this include. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: em: Use the right includeLinus Walleij1-1/+1
The Emma Mobile (EM) GPIO driver uses the too generic include <linux/gpio.h>. It is a driver so it should just use <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: ge: Drop of_gpio.h includeLinus Walleij1-1/+0
This driver does not make use of the functions in <linux/of_gpio.h> so drop this include. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: dln2: Include proper headerLinus Walleij1-4/+3
This driver has no business including <linux/gpio.h>, it is a driver so include <linux/gpio/driver.h>. GPIOF_DIR_IN/GPIOF_DIR_OUT are for consumers and should not be used in drivers to use just 1/0 instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-18Merge tag 'v4.16-rc5' into develLinus Walleij2-23/+20
Linux 4.16-rc5 merged into the GPIO devel branch to resolve a nasty conflict between fixes and devel in the RCAR driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-06gpio: mockup: Update Bamvors mail addressLinus Walleij1-2/+2
Bamvor changed his mail so let's updat his mail address everywhere. Cc: Bamvor Jian Zhang <bamv2005@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-05gpio: rcar: Use wakeup_path i.s.o. explicit clock handlingGeert Uytterhoeven1-22/+16
Since commit ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable when wake-up is enabled"), when a GPIO is used for wakeup, the GPIO block's module clock (if exists) is manually kept running during system suspend, to make sure the device stays active. However, this explicit clock handling is merely a workaround for a failure to properly communicate wakeup information to the device core. Instead, set the device's power.wakeup_path field, to indicate this device is part of the wakeup path. Depending on the PM Domain's active_wakeup configuration, the genpd core code will keep the device enabled (and the clock running) during system suspend when needed. This allows for the removal of all explicit clock handling code from the driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-02gpio: raspberrypi-exp: explain Kconfig dependencyBaruch Siach1-0/+2
Commit 7ed915059c3001 (gpio: raspberrypi-ext: fix firmware dependency) fixed the Kconfig dependency to ensure that gpio-raspberrypi-exp is not built-in when the firmware is a module. But the Kconfig syntax for doing so is cryptic. Add a comment to make it a little easier. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-02gpio: Add GPIO driver for Spreadtrum SC9860 platformBaolin Wang3-0/+299
The Spreadtrum SC9860 platform GPIO controller contains 16 groups and each group contains 16 GPIOs. Each GPIO can set input/output and has the interrupt capability. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-02gpio: raspberrypi-ext: fix firmware dependencyArnd Bergmann1-1/+1
When the firmware driver is a loadable module, the gpio driver cannot be built-in: drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_set': gpio-raspberrypi-exp.c:(.text+0xb4): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_get': gpio-raspberrypi-exp.c:(.text+0x1ec): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_get_direction': gpio-raspberrypi-exp.c:(.text+0x360): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_get_polarity': gpio-raspberrypi-exp.c:(.text+0x4d4): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_dir_out': gpio-raspberrypi-exp.c:(.text+0x670): undefined reference to `rpi_firmware_property' drivers/gpio/gpio-raspberrypi-exp.o:gpio-raspberrypi-exp.c:(.text+0x7fc): more undefined references to `rpi_firmware_property' follow drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_dir_in': drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_probe': gpio-raspberrypi-exp.c:(.text+0x93c): undefined reference to `rpi_firmware_get' We already have a Kconfig dependency for it, but when compile-testing, it is disregarded. This changes the dependency so that compile-testing is only done when the firmware driver is completely disabled. Fixes: a98d90e7d588 ("gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-02gpiolib: friendly debug information for consumerWang Dongsheng1-1/+1
"failed" maybe makes observer confuse when a consumer can not lookup, so change to a friendly information. Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-01gpio: Drop TZ1090 driversJames Hogan4-850/+0
Now that arch/metag/ has been removed, along with TZ1090 SoC support, remove the TZ1090 GPIO drivers. They are of no value without the architecture and SoC platform code. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-metag@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-27gpio: Handle deferred probing in of_find_gpio() properlyChen-Yu Tsai1-1/+1
of_get_named_gpiod_flags() used directly in of_find_gpio() or indirectly through of_find_spi_gpio() or of_find_regulator_gpio() can return -EPROBE_DEFER. This gets overwritten by the subsequent of_find_*_gpio() calls. This patch fixes this by trying of_find_spi_gpio() or of_find_regulator_gpio() only if deferred probing was not requested by the previous of_get_named_gpiod_flags() call. Fixes: 6a537d48461d ("gpio: of: Support regulator nonstandard GPIO properties") Fixes: c85823390215 ("gpio: of: Support SPI nonstandard GPIO properties") Signed-off-by: Chen-Yu Tsai <wens@csie.org> [Augmented to fit with Maxime's patch] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-27gpiolib: Keep returning EPROBE_DEFER when we shouldMaxime Ripard1-0/+13
Commits c85823390215 ("gpio: of: Support SPI nonstandard GPIO properties") and 6a537d48461d ("gpio: of: Support regulator nonstandard GPIO properties") have introduced a regression in the way error codes from of_get_named_gpiod_flags are handled. Previously, those errors codes were returned immediately, but the two commits mentioned above are now overwriting the error pointer, meaning that whatever value has been returned will be dropped in favor of whatever the two new functions will return. This might not be a big deal except for EPROBE_DEFER, on which GPIOlib customers will depend on, and that will now be returned as an hard error which means that they will not probe anymore, instead of gently deferring their probe. Since EPROBE_DEFER basically means that we have found a valid property but there was no GPIO controller registered to handle it, fix this issues by returning it as soon as we encounter it. Fixes: c85823390215 ("gpio: of: Support SPI nonstandard GPIO properties") Fixes: 6a537d48461d ("gpio: of: Support regulator nonstandard GPIO properties") Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [Fold in fix to the fix] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-26Revert "gpio: winbond: fix ISA_BUS_API dependency"Maciej S. Szmigiero1-1/+1
This reverts commit 92a8046c9d952a2a7d21dfcd3afadc72a0bc0f72. Now that the patch series changing ISA_BUS_API dependency to selection was merged this reversion will do the same for gpio-winbond driver to make it consistent with other ISA bus gpio drivers. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-23gpio: tps68470: Update to SPDX license identifierRajmohan Mani1-9/+1
Remove the GPL v2 license boilerplate and update with the SPDX license identifier. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: Change ISA_BUS_API dependency to selectionWilliam Breathitt Gray1-5/+9
The ISA_BUS_API Kconfig option enables the compilation of the ISA bus driver. The ISA bus driver does not perform any hardware interaction, and is instead just a thin layer of software abstraction to eliminate boilerplate code common to ISA-style device drivers. Since ISA_BUS_API has no dependencies and does not jeopardize the integrity of the system when enabled, drivers should select it when the ISA bus driver functionality is needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: gpio-rcar: Support S2RAMHien Dang1-0/+66
This patch adds an implementation that saves and restores the state of GPIO configuration on suspend and resume. Signed-off-by: Hien Dang <hien.dang.eb@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Modify structure of the bank info to simplify a saving registers] [Remove DEV_PM_OPS macro] Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: dwapb: Call directly into the gpiochip to read valueLinus Walleij1-7/+30
We were going out through the (legacy) gpio API to read the value of a line to set up polarity inversion. This is abusive. Do something less abusive by looking up the actual struct gpio_chip * instance and calling .get() directly on it. Acked-by: Hoan Tran <hotran@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: dwapb: Use "stride" rather than "size" for register distanceLinus Walleij1-12/+12
This terminology is more precise. Also cut the stride calculation in the preprocessor, it confuses more than it helps when reading the driver. Acked-by: Hoan Tran <hotran@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: include consumer header in gpiolib.hLinus Walleij1-1/+1
We are forward-declaring enum gpiod_flags, but this is not referenced by pointer, it is a real struct member, so we need to actually include it to compile anything including the local gpiolib.h header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio-intel-mid: Delete an error messageMarkus Elfring1-3/+1
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: tegra: Convert to use DEFINE_SHOW_ATTRIBUTE macroAxel Lin1-13/+3
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: merrifield: Delete an error messageMarkus Elfring1-3/+1
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio-ml-ioh: Delete an error messageMarkus Elfring1-1/+0
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: omap: Improve a size determinationMarkus Elfring1-1/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: omap: Delete an error messageMarkus Elfring1-3/+1
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: timberdale: Improve a size determinationMarkus Elfring1-1/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: timberdale: Delete an error messageMarkus Elfring1-3/+2
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: Add GPIO driver for Nintendo WiiJonathan Neuschäfer3-0/+125
The Nintendo Wii's chipset (called "Hollywood") has a GPIO controller that supports a configurable number of pins (up to 32), interrupts, and some special mechanisms to share the controller between the system's security processor (an ARM926) and the PowerPC CPU. Pin multiplexing is not supported. This patch adds a basic driver for this GPIO controller. Interrupt support will come in a later patch. This patch is based on code developed by Albert Herranz and the GameCube Linux Team, file arch/powerpc/platforms/embedded6xx/hlwd-gpio.c, available at https://github.com/DeltaResero/GC-Wii-Linux-Kernels, but has grown quite dissimilar. v3: - Do some style cleanups, as suggest by Andy Shevchenko v2: - Change hlwd_gpio_driver.driver.name to "gpio-hlwd" to match the filename (was "hlwd_gpio") - Remove unnecessary include of linux/of_gpio.h, as suggested by Linus Walleij. - Add struct device pointer to context struct to make it possible to use dev_info(hlwd->dev, "..."), as suggested by Linus Walleij - Use the GPIO_GENERIC library to reduce code size, as suggested by Linus Walleij - Use iowrite32be instead of __raw_writel for big-endian MMIO access, as suggested by Linus Walleij - Remove commit message paragraph suggesting to diff against the original driver, because it's so different now Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Cc: Albert Herranz <albert_herranz@yahoo.es> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox serviceDave Stevenson3-0/+262
Pi3 and Compute Module 3 have a GPIO expander that the VPU communicates with. There is a mailbox service that now allows control of this expander, so add a kernel driver that can make use of it. Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-13gpio: ftgpio010: Fix some more registersLinus Walleij1-2/+4
There is a register for "bypass" which seems to not be used for anything in some silicon designs, but may be used in others, and there is both a raw and masked interrupt status register. Define them all for clarity, no semantic changes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-12gpio: Support gpio nexus dt bindingsStephen Boyd1-2/+2
Platforms like 96boards have a standardized connector/expansion slot that exposes signals like GPIOs to expansion boards in an SoC agnostic way. We'd like the DT overlays for the expansion boards to be written once without knowledge of the SoC on the other side of the connector. This avoids the unscalable combinatorial explosion of a different DT overlay for each expansion board and SoC pair. Now that we have nexus support in the OF core let's change the function call here that parses the phandle lists of gpios to use the nexus variant. This allows us to remap phandles and their arguments through any number of nexus nodes and end up with the actual gpio provider being used. Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-02-12gpio: davinci: add support for pinmux gpio rangesDavid Lechner1-0/+6
This adds support for the pinmux gpio ranges feature to the DaVinci gpio driver. Only device tree is supported since the non-DT boards don't use a generic pinmux controller. Cc: Keerthy <j-keerthy@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-12gpio-wm831x: Use seq_putc() in wm831x_gpio_dbg_show()Markus Elfring1-1/+1
A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-02Merge tag 'pinctrl-v4.16-1' of ↵Linus Torvalds2-74/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...
2018-01-31Merge tag 'gpio-v4.16-1' of ↵Linus Torvalds35-533/+1951
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ...
Powered by cgit, Gruvboxed by Blaster4385.