aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-pch.c
AgeCommit message (Collapse)AuthorFilesLines
2013-05-20gpio: Don't override the error code in probe error handlingAxel Lin1-2/+1
Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin <[email protected]> Cc: Tomoya MORINAGA <[email protected]> Cc: Denis Turischev <[email protected]> Cc: Lars Poeschel <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-12-11Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <[email protected]>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-11-28gpio: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <[email protected]> Cc: Grant Likely <[email protected]> Acked-by: Linus Walleij <[email protected]> Cc: Peter Tyser <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-11-28gpio: remove use of __devinitBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <[email protected]> Cc: Grant Likely <[email protected]> Cc: Peter Tyser <[email protected]> Cc: Santosh Shilimkar <[email protected]> Cc: Kevin Hilman <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-11-28gpio: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <[email protected]> Cc: Grant Likely <[email protected]> Cc: Peter Tyser <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-11-04gpio-pch: Set parent dev for gpio chipAlexander Stein1-0/+1
This will show the gpio chip as a child node under /sys/bus/pci/devices/xxxx:xx:xx.x/ Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-08-17gpio: gpio-pch: Use spinlock for register access protectionAxel Lin1-12/+10
gpio_chip.can_sleep is 0, but current code uses mutex in pch_gpio_set pch_gpio_get and pch_gpio_direction_input functions. Thus those functions are not callable from interrupt context. This patch converts mutex into spinlock. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-05-24Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-11/+1
Pull GPIO driver changes from Grant Likely: "Lots of gpio changes, both to core code and drivers. Changes do touch architecture code to remove the need for separate arm/gpio.h includes in most architectures. Some new drivers are added, and a number of gpio drivers are converted to use irq_domains for gpio inputs used as interrupts. Device tree support has been amended to allow multiple gpio_chips to use the same device tree node. Remaining changes are primarily bug fixes." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits) gpio/generic: initialize basic_mmio_gpio shadow variables properly gpiolib: Remove 'const' from data argument of gpiochip_find() gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583 gpiolib: quiet gpiochip_add boot message noise gpio: mpc8xxx: Prevent NULL pointer deref in demux handler gpio/lpc32xx: Add device tree support gpio: Adjust of_xlate API to support multiple GPIO chips gpiolib: Implement devm_gpio_request_one() gpio-mcp23s08: dbg_show: fix pullup configuration display Add support for TCA6424A gpio/omap: (re)fix wakeups on level-triggered GPIOs gpio/omap: fix broken context restore for non-OFF mode transitions gpio/omap: fix missing check in *_runtime_suspend() gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume() gpio/omap: remove suspend/resume callbacks gpio/omap: remove retrigger variable in gpio_irq_handler gpio/omap: remove saved_wakeup field from struct gpio_bank gpio/omap: remove suspend_wakeup field from struct gpio_bank gpio/omap: remove saved_fallingdetect, saved_risingdetect gpio/omap: remove virtual_irq_start variable ... Conflicts: drivers/gpio/gpio-samsung.c
2012-05-11gpio: pch9: Use proper flow type handlersThomas Gleixner1-29/+28
Jean-Francois Dagenais reported: Configuring a gpio pin with the gpio-pch driver with "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for threaded ISR until the ISR thread actually gets to physically clear the interrupt on the triggering chip!! The immediate observable symptom is the high CPU usage for my ISR thread task and the interrupt count in /proc/interrupts incrementing radically. The driver is wrong in several ways: 1) Using handle_simple_irq() does not provide proper flow control handling. In the case of oneshot threaded handlers for the demultiplexed interrupts this results in an interrupt storm because the simple handler does not deal with masking/unmasking. Even without threaded oneshot handlers an interrupt storm for level type interrupts can easily be triggered when the interrupt is disabled and the interrupt line is activated from the device. 2) Acknowlegding the demultiplexed interrupt before calling the handler is wrong for level type interrupts. 3) The set_type function unconditionally enables the interrupt. It's supposed to set the type and nothing else. The unmasking is done by the core code. Move the acknowledge code into a separate function and add it to the demux irqchip callbacks. Remove the unconditional enabling from the set_type() callback and set the proper flow handlers depending on the selected type (level/edge). Reported-and-tested-by: Jean-Francois Dagenais <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2012-04-07gpio: Convert drivers to use module_pci_driver()Axel Lin1-11/+1
This patch converts the drivers in drivers/gpio/* to use module_pci_driver() macro which makes the code smaller and a bit simpler by having less boilerplate. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2012-02-01gpio: Add missing spin_lock_init in gpio-pch driverAxel Lin1-0/+1
This bug was introduced by commit d568a681 "gpio-pch: add spinlock in suspend/resume processing" which adds a spinlock to struct pch_gpio but never init the spinlock. Reported-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Axel Lin <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2012-01-16gpio-pch: cleanup __iomem annotation usageMárton Németh1-1/+1
The __iomem annotation is to be used together with pointers used as iowrite32() parameter. For more details see [1] and [2]. This patch will remove the following sparse warnings ("make C=1"): * warning: incorrect type in assignment (different address spaces) * warning: incorrect type in argument 1 (different address spaces) * warning: incorrect type in argument 2 (different address spaces) References: [1] A new I/O memory access mechanism (Sep 15, 2004) http://lwn.net/Articles/102232/ [2] Being more anal about iospace accesses (Sep 15, 2004) http://lwn.net/Articles/102240/ Signed-off-by: Márton Németh <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2012-01-16gpio-pch: cleanup NULL pointer checkingMárton Németh1-1/+1
This patch will remove the following sparse warning ("make C=1"): * warning: Using plain integer as NULL pointer Signed-off-by: Márton Németh <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-12-12pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA1-3/+3
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-12-12pch_gpio: Support new device LAPIS Semiconductor ML7831 IOHTomoya MORINAGA1-0/+1
ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-10-31drivers/gpio: Fix drivers who are implicit users of module.hPaul Gortmaker1-0/+1
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in gpio are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <[email protected]>
2011-10-19gpio-pch: Use NUMA_NO_NODE not GFP_KERNELTomoya MORINAGA1-1/+1
Currently, GFP_KERNEL is used as parameter of irq_alloc_descs like below. irq_base = irq_alloc_descs(-1, IOH_IRQ_BASE, num_ports[j], GFP_KERNEL); This is not true. So, this patch uses NUMA_NO_NODE not GFP_KERNEL. Reported-by: Dan Carpenter <[email protected]> Reported-by: David Rientjes <[email protected]> Signed-off-by: Tomoya MORINAGA <[email protected]> Acked-by: David Rientjes <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-10-05gpio-pch: Support interrupt functionTomoya MORINAGA1-0/+187
Signed-off-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-10-05gpio-pch: Save register value in suspend()Tomoya MORINAGA1-1/+21
Currently, when suspend is occurred, register im0/1 and gpio_use_sel are not saved. This patch modifies so that register im0/1 and gpio_use_sel are saved. Signed-off-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-10-05gpio-pch: modify gpio_nums and maskTomoya MORINAGA1-6/+25
Currently, the number of GPIO pins is set fixed value(=12). Also PIN MASK is set as '0xfff'. However the pins differs by IOH. This patch sets the value correctly. Signed-off-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-10-05gpio-pch: support ML7223 IOH n-BusTomoya MORINAGA1-0/+1
Signed-off-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-10-05gpio-pch: add spinlock in suspend/resume processingTomoya MORINAGA1-0/+10
Signed-off-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-10-05gpio-pch: Delete invalid "restore" code in suspend()Tomoya MORINAGA1-1/+0
Signed-off-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-06-06gpio: reorganize driversGrant Likely1-0/+316
Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.