aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-mockup.c
AgeCommit message (Collapse)AuthorFilesLines
2019-03-28gpio: mockup: use simple_read_from_buffer() in debugfs read callbackBartosz Golaszewski1-8/+2
Calling read() for a single byte read will return 2 currently. Use simple_read_from_buffer() which correctly handles all sizes. Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface") Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2019-03-27gpio: mockup: fix debugfs readBartosz Golaszewski1-4/+6
The debugfs read callback must advance ppos or users using read() on the file descriptor will never get the EOL. This wasn't spotted before as I was using busybox cat for testing which uses sendfile() internally and only noticed it now when switched to cat from coreutils. Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface") Signed-off-by: Bartosz Golaszewski <[email protected]>
2019-02-19gpio: mockup: rework debugfs interfaceBartosz Golaszewski1-14/+103
Modify the way the debugfs interface works in gpio-mockup. Introduce the concept of dummy pull config which will keep the mockup lines in known state. The pull values can be modified by writing to the debugfs files corresponding to lines. Lines in input mode always report the current pull value, lines in output mode change the line value but it will revert back to the one specified by current pull when released. Signed-off-by: Bartosz Golaszewski <[email protected]>
2019-02-19gpio: mockup: change the signature of unlocked get/set helpersBartosz Golaszewski1-11/+8
The unlocked variants only get called from places where we already have the pointer to the underlying gpio_mockup_chip structure, so take it as parameter instead of struct gpio_chip. Signed-off-by: Bartosz Golaszewski <[email protected]>
2019-02-19gpio: mockup: change the type of 'offset' to unsigned intBartosz Golaszewski1-1/+1
This field can never be negative. Signed-off-by: Bartosz Golaszewski <[email protected]>
2019-02-19gpio: mockup: don't create the debugfs link named after the labelBartosz Golaszewski1-5/+1
User-space tests no longer use it and we're breaking the interface anyway. Signed-off-by: Bartosz Golaszewski <[email protected]>
2019-02-19gpio: mockup: implement get_multiple()Bartosz Golaszewski1-0/+17
We already support set_multiple(). Implement get_multiple() as well. Signed-off-by: Bartosz Golaszewski <[email protected]>
2019-02-19gpio: mockup: add lockingBartosz Golaszewski1-7/+43
While no user reported any race condition problems with gpio-mockup, let's be on the safe side and use a mutex when performing any changes on the dummy chip structures. Suggested-by: Uwe Kleine-König <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2018-11-16gpio: mockup: fix indicated directionBartosz Golaszewski1-3/+3
Commit 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning") fixed an existing issue but broke libgpiod tests by changing the default direction of dummy lines to output. We don't break user-space so make gpio-mockup behave as before. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-10-03gpio: mockup: use device properties instead of platform_dataBartosz Golaszewski1-31/+51
Some users want to introduce device tree support to the mockup driver. Let's make it easier by switching to using generic device properties. The driver stays compatible with previous use cases and after this conversion there'll be no need to change the way probing of mockup GPIO chips works. Tested with libgpiod test suite. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-05-16gpio: mockup: use the SPDX identifier and remove license boilerplateBartosz Golaszewski1-6/+1
Use the SPDX license identifier for GPLv2.0 or later and remove the license boilerplate. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-03-27gpio: mockup: fix a potential crash when creating debugfs entriesBartosz Golaszewski1-1/+1
If we failed to create the top debugfs directory, we must not try to create the child nodes. We currently only check if gpio_mockup_dbg_dir is not NULL, but it can also contain an errno if debugfs is disabled in build options. Use IS_ERR_OR_NULL() instead. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-03-06gpio: mockup: Update Bamvors mail addressLinus Walleij1-2/+2
Bamvor changed his mail so let's updat his mail address everywhere. Cc: Bamvor Jian Zhang <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-08gpio: mockup: fix a return value checkBartosz Golaszewski1-2/+2
The return value of platform_device_register_resndata() on error is an error code converted to pointer with ERR_PTR(), not NULL. Check the return value correctly. Fixes: 8a39f597bcfd ("gpio: mockup: rework device probing") Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: add helpers for accessing the gpio rangesBartosz Golaszewski1-4/+14
In order to avoid repeating the calculations on every access - add helpers for gpio base and ngpio components of the ranges array. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: rename gpio_mockup_params_nr to gpio_mockup_num_rangesBartosz Golaszewski1-6/+6
This variable holds the number of mockup GPIO ranges so rename it accordingly. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: modify the return value check for devm_irq_sim_init()Bartosz Golaszewski1-1/+1
As discussed with Marc Zyngier: irq_sim_init() and its devres variant should return the base of the allocated interrupt range on success rather than 0. This will be modified later - first, change the way users handle the return value of these routines. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: implement gpio_mockup_set_multiple()Bartosz Golaszewski1-0/+11
Implement the set_multiple() callback and register it with the gpiolib framework. This is only meant to also test the internal kernel API. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: tweak line breaksBartosz Golaszewski1-4/+4
Minor readability tweak: prefer breaking the lines in a way where the second part is longer than the first. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: verify that ngpio > 0Bartosz Golaszewski1-0/+9
Improve the module params sanitization: bail out from init if the user tries to pass a non-positive number of GPIO lines for any mockup chip. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: fix debugfs handlingBartosz Golaszewski1-5/+5
The debugfs routines returning pointers can return NULL or error codes embedded with ERR_PTR(). Check the return values with IS_ERR_OR_NULL(). While we're at it: make the error message more specific so it's not confused with the one emitted when the top-level gpio-mockup debugfs directory creation fails. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: group code by logicBartosz Golaszewski1-23/+23
Keep GPIO chip callbacks, event trigger callbacks and mockup chip setup code visibly separated. We're mostly good - just need to move the line naming routine below. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: change the type of value field in line state structBartosz Golaszewski1-1/+1
GPIO values are universally represented as integers. Change the type of the variable storing the current line value to int for consistency. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: extend the debugfs layoutBartosz Golaszewski1-2/+8
Currently each chip has a dedicated directory in debugfs for event triggers. We use the chip's label for the directory name, but the user can't really associate these directories with chip names without parsing the relevant sysfs entries. Use chip names for directory names. For backward compatibility: create links pointing to the actual directories named using the chip labels. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: pass the named_lines parameter over platform_dataBartosz Golaszewski1-1/+3
Move the last bits of code dealing with module parameters to the init function. Add a new variable to platform data, which indicates to the probe function if it should name the GPIO lines. If we ever want to make the line naming more fine-grained (e.g. per chip switch) it will be easier this way. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: merge gpio_mockup_add() into gpio_mockup_probe()Bartosz Golaszewski1-47/+31
Now that the probe() function only does what is should, there's no need to split the chip adding logic into a separate routine. Merge gpio_mockup_add() into gpio_mockup_probe(). Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: remove a stray tabBartosz Golaszewski1-1/+1
Minor coding style fix. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: implement gpio_mockup_err()Bartosz Golaszewski1-6/+5
Visually shrink the pr_err() calls by encapsulating adding the module name prefix to the message in a macro. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: rework device probingBartosz Golaszewski1-51/+71
We currently create a single platform device in init and then parse the configuration passed to us via module parameters in probe() before creating GPIO chips and registering them with the gpiolib framework. The relation between platform devices and mockup chips should be 1:1. Create a separate platform device for each mockup chip using convenient helpers (platform_device_register_resndata()). Pass a platform data structure to probe() in which the configuration (GPIO base, number of lines, chip index) extracted from the module params is stored. Make probe() create a single mockup chip for every platform device. This approach has several advantages: - we only parse the module parameters in init() and can bail out before attaching any device if the input is invalid (currently we would have to examine kernel logs), - we'll get notified by the device framework about errors in probe() for specific chips, - probe() gets simplified and only does what it's supposed to. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: verify the number of GPIO chips requestedBartosz Golaszewski1-1/+3
The number of supported mockup chips is limited. Check this limit when parsing the module parameters. Also: make sure that each chip is described with a <base - ngpio> pair. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: parse the module params in init, not probeBartosz Golaszewski1-3/+3
If the module parameters are invalid, we should bail out from the init function instead of detecting it during the device probe. That way we don't even allow the user to load the module if we don't accept the arguments. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-12-02gpio: mockup: add missing prefixesBartosz Golaszewski1-11/+12
Add the gpio_mockup_ prefix to the remaining symbols that still don't have it, so that the entire driver code is consistent. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-08-31gpio: mockup: remove unused variable gcColin Ian King1-2/+0
The variable gc is assigned but never read and is redundant. Remove it. Cleans up clang warning: drivers/gpio/gpio-mockup.c:169:2: warning: Value stored to 'gc' is never read Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-08-21gpio: mockup: use irq_simBartosz Golaszewski1-70/+7
Shrink the driver by removing the code dealing with dummy interrupts and replacing it with calls to the irq_sim API. Signed-off-by: Bartosz Golaszewski <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-06-20gpio: mockup: use devm_kcalloc() where applicableBartosz Golaszewski1-4/+4
When allocating a zeroed array of objects use devm_kcalloc() instead of manually calculating the required size and using devm_kzalloc(). Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-06-20gpio: mockup: add myself as authorBartosz Golaszewski1-0/+2
Just taking credit for the recent changes and new features. :) Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-06-20gpio: mockup: improve the error messageBartosz Golaszewski1-2/+3
Indicate the error number and make the message a bit more elaborate. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-06-20gpio: mockup: don't return magic numbers from probe()Bartosz Golaszewski1-1/+1
When the requested number of GPIO lines is 0, return -EINVAL, not -1 which is -EPERM. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-06-20gpio: mockup: improve readabilityBartosz Golaszewski1-7/+13
We currently shift bits here and there without actually explaining what we're doing. Add some helper variables with names indicating their purpose to improve the code readability. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-06-20gpio: mockup: refuse to accept an odd number of GPIO rangesBartosz Golaszewski1-1/+1
Currently we ignore the last odd range value, since each chip is described by two values. Be more strict and require the user to pass an even number of ranges. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-06-20gpio: mockup: tweak gpio_mockup_event_write()Bartosz Golaszewski1-11/+10
Invert the logic of the irq_enabled check and only access the private data after the input is sanitized. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-06-20gpio: mockup: improve the debugfs input sanitizationBartosz Golaszewski1-12/+7
We're currently only checking the first character of the input to the debugfs event files, so a string like '0sdfdsf' is valid and indicates a falling edge event. Be more strict and only allow '0', '1', '0\n' & '1\n'. While we're at it: move the sanitization code before the irq_enabled check so that we indicate an error on invalid input even if nobody is waiting for events. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-05-29gpio: mockup: support irqmask and irqunmaskBartosz Golaszewski1-6/+20
Even though this is a testing module, be nice and actually implement these functions. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-05-29gpio: mockup: be quiet unless something goes wrongBartosz Golaszewski1-3/+0
When inserting and removing the module repeatedly (e.g. when running the libgpiod test-suite) the kernel log gets clobbered with messages reporting successful creation of dummy gpiochips. Remove this message and only emit logs when something bad happens. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-05-29gpio: mockup: add prefixes to the direction enumBartosz Golaszewski1-4/+4
All internal symbols except for the direction enum follow the same convention and use the gpio_mockup prefix. Add the prefix to the DIR_IN and DIR_OUT definitions as well for consistency across the file. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-05-29gpio: mockup: fix direction valuesBartosz Golaszewski1-2/+2
The comment in linux/gpio/driver.h says: @get_direction: returns direction for signal "offset", 0=out, 1=in We got those switched at some point. Fix the values. Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-05-04Merge tag 'gpio-v4.12-1' of ↵Linus Torvalds1-15/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.12 kernel cycle. Core changes: - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers: - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements: - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot" * tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: f7188x: Add a missing break gpio: omap: return error if requested debounce time is not possible gpio: Add ROHM BD9571MWV-M PMIC GPIO driver gpio: gpio-wcove: fix GPIO IRQ status mask gpio: DT bindings, move tca9554 from pcf857x to pca953x gpio: move tca9554 from pcf857x to pca953x gpio: arizona: Correct check whether the pin is an input gpio: Add XRA1403 DTS binding documentation dt-bindings: add exar to vendor prefixes list gpio: gpio-wcove: fix irq pending status bit width gpio: dwapb: use dwapb_read instead of readl_relaxed gpio: aspeed: Add open-source and open-drain support gpio: aspeed: Add debounce support gpio: aspeed: dt: Add optional clocks property gpio: aspeed: dt: Fix description alignment in bindings document gpio: mvebu: Add limited PWM support gpio: Use unsigned int for interrupt numbers gpio: f7188x: Add F71889A GPIO support. gpio: core: Decouple open drain/source flag with active low/high gpio: arizona: Correct handling for reading input GPIOs ...
2017-03-15gpio: mockup: use devm_irq_alloc_descs()Bartosz Golaszewski1-15/+1
Use the resource managed variant of irq_alloc_descs(). This allows us to remove gpio_mockup_remove(). Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Bamvor Jian Zhang <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-03-06gpio: mockup: return -EFAULT if copy_from_user() failsDan Carpenter1-4/+3
copy_from_user() returns the number of bytes remaining to be copied but we want to return negative error codes on failue. Fixes: 9202ba2397d1 ("gpio: mockup: implement event injecting over debugfs") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-02-13gpio: mockup: implement event injecting over debugfsBartosz Golaszewski1-1/+115
Create a debugfs directory for every mockup chip and a single file for every line. Writing (0 or 1) to these files allows the user to inject line events (falling or rising edge respectively). Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.