| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, the initrd= command line option to the EFI stub only supports
loading files that reside on the same volume as the loaded image, which
is not workable for loaders like GRUB that don't even implement the
volume abstraction (EFI_SIMPLE_FILE_SYSTEM_PROTOCOL), and load the
kernel from an anonymous buffer in memory. For this reason, another
method was devised that relies on the LoadFile2 protocol.
However, the command line loader is rather useful when using the UEFI
shell or other generic loaders that have no awareness of Linux specific
protocols so let's make it a bit more flexible, by permitting textual
device paths to be provided to initrd= as well, provided that they refer
to a file hosted on a EFI_SIMPLE_FILE_SYSTEM_PROTOCOL volume. E.g.,
initrd=PciRoot(0x0)/Pci(0x3,0x0)/HD(1,MBR,0xBE1AFDFA,0x3F,0xFBFC1)/rootfs.cpio.gz
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The EFI spec is not very clear about which permissions are being given
when allocating pages of a certain type. However, it is quite obvious
that EFI_LOADER_CODE is more likely to permit execution than
EFI_LOADER_DATA, which becomes relevant once we permit booting the
kernel proper with the firmware's 1:1 mapping still active.
Ostensibly, recent systems such as the Surface Pro X grant executable
permissions to EFI_LOADER_CODE regions but not EFI_LOADER_DATA regions.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
|
|
There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq()
or platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
./drivers/firmware/tegra/bpmp-tegra210.c:204:2-9: line 204 is redundant
because platform_get_irq() already prints an error
./drivers/firmware/tegra/bpmp-tegra210.c:216:2-9: line 216 is redundant
because platform_get_irq() already prints an error
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2579
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Force the use of SetVirtualAddressMap() on Ampera Altra arm64
machines, which crash in SetTime() if no virtual remapping is used
This is the first time we've added an SMBIOS based quirk on arm64,
but fortunately, we can just call a EFI protocol to grab the type #1
SMBIOS record when running in the stub, so we don't need all the
machinery we have in the kernel proper to parse SMBIOS data.
- Drop a spurious warning on misaligned runtime regions when using 16k
or 64k pages on arm64
* tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Fix handling of misaligned runtime regions and drop warning
arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines
|
|
Ampere Altra machines are reported to misbehave when the SetTime() EFI
runtime service is called after ExitBootServices() but before calling
SetVirtualAddressMap(). Given that the latter is horrid, pointless and
explicitly documented as optional by the EFI spec, we no longer invoke
it at boot if the configured size of the VA space guarantees that the
EFI runtime memory regions can remain mapped 1:1 like they are at boot
time.
On Ampere Altra machines, this results in SetTime() calls issued by the
rtc-efi driver triggering synchronous exceptions during boot. We can
now recover from those without bringing down the system entirely, due to
commit 23715a26c8d81291 ("arm64: efi: Recover from synchronous
exceptions occurring in firmware"). However, it would be better to avoid
the issue entirely, given that the firmware appears to remain in a funny
state after this.
So attempt to identify these machines based on the 'family' field in the
type #1 SMBIOS record, and call SetVirtualAddressMap() unconditionally
in that case.
Tested-by: Alexandru Elisei <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The CBMEM area is a downward-growing memory region used by coreboot to
dynamically allocate tagged data structures ("CBMEM entries") that
remain resident during boot.
This implements a driver which exports access to the CBMEM entries
via sysfs under /sys/bus/coreboot/devices/cbmem-<id>.
This implementation is quite versatile. Examples of how it could be
used are given below:
* Tools like util/cbmem from the coreboot tree could use this driver
instead of finding CBMEM in /dev/mem directly. Alternatively,
firmware developers debugging an issue may find the sysfs interface
more ergonomic than the cbmem tool and choose to use it directly.
* The crossystem tool, which exposes verified boot variables, can use
this driver to read the vboot work buffer.
* Tools which read the BIOS SPI flash (e.g., flashrom) can find the
flash layout in CBMEM directly, which is significantly faster than
searching the flash directly.
Write access is provided to all CBMEM regions via
/sys/bus/coreboot/devices/cbmem-<id>/mem, as the existing cbmem
tooling updates this memory region, and envisioned use cases with
crossystem can benefit from updating memory regions.
Link: https://issuetracker.google.com/239604743
Cc: Stephen Boyd <[email protected]>
Cc: Tzung-Bi Shih <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Julius Werner <[email protected]>
Tested-by: Jack Rosenthal <[email protected]>
Signed-off-by: Jack Rosenthal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The coreboot_table driver registers a coreboot bus while probing a
"coreboot_table" device representing the coreboot table memory region.
Probing this device (i.e., registering the bus) is a dependency for the
module_init() functions of any driver for this bus (e.g.,
memconsole-coreboot.c / memconsole_driver_init()).
With synchronous probe, this dependency works OK, as the link order in
the Makefile ensures coreboot_table_driver_init() (and thus,
coreboot_table_probe()) completes before a coreboot device driver tries
to add itself to the bus.
With asynchronous probe, however, coreboot_table_probe() may race with
memconsole_driver_init(), and so we're liable to hit one of these two:
1. coreboot_driver_register() eventually hits "[...] the bus was not
initialized.", and the memconsole driver fails to register; or
2. coreboot_driver_register() gets past #1, but still races with
bus_register() and hits some other undefined/crashing behavior (e.g.,
in driver_find() [1])
We can resolve this by registering the bus in our initcall, and only
deferring "device" work (scanning the coreboot memory region and
creating sub-devices) to probe().
[1] Example failure, using 'driver_async_probe=*' kernel command line:
[ 0.114217] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
[ 0.114307] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc1 #63
[ 0.114316] Hardware name: Google Scarlet (DT)
...
[ 0.114488] Call trace:
[ 0.114494] _raw_spin_lock+0x34/0x60
[ 0.114502] kset_find_obj+0x28/0x84
[ 0.114511] driver_find+0x30/0x50
[ 0.114520] driver_register+0x64/0x10c
[ 0.114528] coreboot_driver_register+0x30/0x3c
[ 0.114540] memconsole_driver_init+0x24/0x30
[ 0.114550] do_one_initcall+0x154/0x2e0
[ 0.114560] do_initcall_level+0x134/0x160
[ 0.114571] do_initcalls+0x60/0xa0
[ 0.114579] do_basic_setup+0x28/0x34
[ 0.114588] kernel_init_freeable+0xf8/0x150
[ 0.114596] kernel_init+0x2c/0x12c
[ 0.114607] ret_from_fork+0x10/0x20
[ 0.114624] Code: 5280002b 1100054a b900092a f9800011 (885ffc01)
[ 0.114631] ---[ end trace 0000000000000000 ]---
Fixes: b81e3140e412 ("firmware: coreboot: Make bus registration symmetric")
Cc: <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/20221019180934.1.If29e167d8a4771b0bf4a39c89c6946ed764817b9@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Provide NVMEM content to the NVRAM driver from a simple
memory resource. This is necessary to use NVRAM in a memory-
mapped flash device. Patch taken from OpenWrts development
tree.
This patch makes it possible to use memory-mapped NVRAM
on the D-Link DWL-8610AP and the D-Link DIR-890L.
Cc: Hauke Mehrtens <[email protected]>
Cc: [email protected]
Cc: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Rafał Miłecki <[email protected]>
[Added an export for modules potentially using the init symbol]
Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
|
|
Enable asynchronous unwind table generation for both the core kernel as
well as modules, and emit the resulting .eh_frame sections as init code
so we can use the unwind directives for code patching at boot or module
load time.
This will be used by dynamic shadow call stack support, which will rely
on code patching rather than compiler codegen to emit the shadow call
stack push and pop instructions.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Tested-by: Sami Tolvanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Even though our EFI zboot decompressor is pedantically spec compliant
and idiomatic for EFI image loaders, calling LoadImage() and
StartImage() for the nested image is a bit of a burden. Not only does it
create workflow issues for the distros (as both the inner and outer
PE/COFF images need to be signed for secure boot), it also copies the
image around in memory numerous times:
- first, the image is decompressed into a buffer;
- the buffer is consumed by LoadImage(), which copies the sections into
a newly allocated memory region to hold the executable image;
- once the EFI stub is invoked by StartImage(), it will also move the
image in memory in case of KASLR, mirrored memory or if the image must
execute from a certain a priori defined address.
There are only two EFI spec compliant ways to load code into memory and
execute it:
- use LoadImage() and StartImage(),
- call ExitBootServices() and take ownership of the entire system, after
which anything goes.
Given that the EFI zboot decompressor always invokes the EFI stub, and
given that both are built from the same set of objects, let's merge the
two, so that we can avoid LoadImage()/StartImage but still load our
image into memory without breaking the above rules.
This also means we can decompress the image directly into its final
location, which could be randomized or meet other platform specific
constraints that LoadImage() does not know how to adhere to. It also
means that, even if the encapsulated image still has the EFI stub
incorporated as well, it does not need to be signed for secure boot when
wrapping it in the EFI zboot decompressor.
In the future, we might decide to retire the EFI stub attached to the
decompressed image, but for the time being, they can happily coexist.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The LoongArch build of the EFI stub is part of the core kernel image, and
therefore accesses section markers directly when it needs to figure out
the size of the various section.
The zboot decompressor does not have access to those symbols, but
doesn't really need that either. So let's move handle_kernel_image()
into a separate file (or rather, move everything else into a separate
file) so that the zboot build does not pull in unused code that links to
symbols that it does not define.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Currently, the EFI entry code for LoongArch is set up to copy the
executable image to the preferred offset, but instead of branching
directly into that image, it branches to the local copy of kernel_entry,
and relies on the logic in that function to switch to the link time
address instead.
This is a bit sloppy, and not something we can support once we merge the
EFI decompressor with the EFI stub. So let's clean this up a bit, by
adding a helper that computes the offset of kernel_entry from the start
of the image, and simply adding the result to VMLINUX_LOAD_ADDRESS.
And considering that we cannot execute from anywhere else anyway, let's
avoid efi_relocate_kernel() and just allocate the pages instead.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The arm64 build of the EFI stub is part of the core kernel image, and
therefore accesses section markers directly when it needs to figure out
the size of the various section.
The zboot decompressor does not have access to those symbols, but
doesn't really need that either. So let's move handle_kernel_image()
into a separate file (or rather, move everything else into a separate
file) so that the zboot build does not pull in unused code that links to
symbols that it does not define.
While at it, introduce a helper routine that the generic zboot loader
will need to invoke after decompressing the image but before invoking
it, to ensure that the I-side view of memory is consistent.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The RISC-V build of the EFI stub is part of the core kernel image, and
therefore accesses section markers directly when it needs to figure out
the size of the various section.
The zboot decompressor does not have access to those symbols, but
doesn't really need that either. So let's move handle_kernel_image()
into a separate file (or rather, move everything else into a separate
file) so that the zboot build does not pull in unused code that links to
symbols that it does not define.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Factor out the expressions that describe the preferred placement of the
loaded image as well as the minimum alignment so we can reuse them in
the decompressor.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
In order to be able to switch from LoadImage() [which treats the
supplied PE/COFF image as file input only, and reconstructs the memory
image based on the section descriptors] to a mode where we allocate the
memory directly, and invoke the image in place, we need to now how much
memory to allocate beyond the end of the image. So copy this information
from the payload's PE/COFF header to the end of the compressed version
of the payload, so that the decompressor app can access it before
performing the decompression itself.
We'll also need to size of the code region once we switch arm64 to
jumping to the kernel proper with MMU and caches enabled, so let's
capture that information as well. Note that SizeOfCode does not account
for the header, so we need SizeOfHeaders as well.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
In preparation for allowing the EFI zboot decompressor to reuse most of
the EFI stub machinery, factor out the actual EFI PE/COFF entrypoint
into a separate file.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Clone the implementations of strrchr() and memchr() in lib/string.c so
we can use them in the standalone zboot decompressor app. These routines
are used by the FDT handling code.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Currently, arm64, RISC-V and LoongArch rely on the fact that struct
screen_info can be accessed directly, due to the fact that the EFI stub
and the core kernel are part of the same image. This will change after a
future patch, so let's ensure that the screen_info handling is able to
deal with this, by adopting the arm32 approach of passing it as a
configuration table. While at it, switch to ACPI reclaim memory to hold
the screen_info data, which is more appropriate for this kind of
allocation.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Split the efi_printk() routine into its own source file, and provide
local implementations of strlen() and strnlen() so that the standalone
zboot app can efi_err and efi_info etc.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
We will no longer be able to call into the kernel image once we merge
the decompressor with the EFI stub, so we need our own implementation of
memcmp(). Let's add the one from lib/string.c and simplify it.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
In preparation for moving the EFI stub functionality into the zboot
decompressor, switch to the stub's implementation of strncmp()
unconditionally.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
We will be sharing efi-entry.S with the zboot decompressor build, which
does not link against vmlinux directly. So move it into the libstub
source directory so we can include in the libstub static library.
Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
|
|
The efi_enter_kernel() routine will be shared between the existing EFI
stub and the zboot decompressor, and the version of
dcache_clean_to_poc() that the core kernel exports to the stub will not
be available in the latter case.
So move the handling into the .c file which will remain part of the stub
build that integrates directly with the kernel proper.
Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
|
|
No need for the same pattern to be used four times for each architecture
individually if we can just apply it once later.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The EFI properties table was a short lived experiment that never saw the
light of day on non-x86 (if at all) so let's drop the handling of it.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Randomizing the UEFI runtime memory map requires the use of the
SetVirtualAddressMap() EFI boot service, which we prefer to avoid. So
let's drop randomization, which was already problematic in combination
with hibernation, which means that distro kernels never enabled it in
the first place.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
UEFI runtime page tables dump only for ARM64 at present,
but ARM support EFI and ARM_PTDUMP_DEBUGFS now. Since
ARM could potentially execute with a 1G/3G user/kernel
split, choosing 1G as the upper limit for UEFI runtime
end, with this, we could enable UEFI runtime page tables
on ARM.
Acked-by: Ard Biesheuvel <[email protected]>
Tested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- A pair of tweaks to the EFI random seed code so that externally
provided version of this config table are handled more robustly
- Another fix for the v6.0 EFI variable refactor that turned out to
break Apple machines which don't provide QueryVariableInfo()
- Add some guard rails to the EFI runtime service call wrapper so we
can recover from synchronous exceptions caused by firmware
* tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Recover from synchronous exceptions occurring in firmware
efi: efivars: Fix variable writes with unsupported query_variable_store()
efi: random: Use 'ACPI reclaim' memory for random seed
efi: random: reduce seed size to 32 bytes
efi/tpm: Pass correct address to memblock_reserve
|
|
'xfer_alloc_table' is a bitmap. So use 'devm_bitmap_zalloc()' to simplify
code and improve the semantic of the code.
While at it, remove a redundant 'bitmap_zero()' call.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/43ab1a7dd073d0d037d5d4bbbd5f8335de605826.1667457664.git.christophe.jaillet@wanadoo.fr
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
- dma-buf: locking improvements
- firmware: New API in the RaspberryPi firmware driver used by vc4
Core Changes:
- client: Null pointer dereference fix in drm_client_buffer_delete()
- mm/buddy: Add back random seed log
- ttm: Convert ttm_resource to use size_t for its size, fix for an
undefined behaviour
Driver Changes:
- bridge:
- adv7511: use dev_err_probe
- it6505: Fix return value check of pm_runtime_get_sync
- panel:
- sitronix: Fixes and clean-ups
- lcdif: Increase DMA burst size
- rockchip: runtime_pm improvements
- vc4: Fix for a regression preventing the use of 4k @ 60Hz, and
further HDMI rate constraints check.
- vmwgfx: Cursor improvements
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103083437.ksrh3hcdvxaof62l@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.1
A bunch of fixes to handle:
1. A possible resource leak in scmi_remove(). The returned error
value gets ignored by the driver core and can remove the device and
free the devm-allocated resources. As a simple solution to be able to
easily backport, the bind attributes in the driver is suppressed as
there is no need to support it. Additionally the remove path is cleaned
up by adding device links between the core and the protocol devices
so that a proper and complete unbinding happens.
2. A possible spin-loop in the SCMI transmit path in case of misbehaving
platform firmware. A timeout is added to the existing loop so that
the SCMI stack can bailout aborting the transmission with warnings.
3. Optional Rx channel correctly by reporting any memory errors instead
of ignoring the same with other allowed errors.
4. The use of proper device for all the device managed allocations in the
virtio transport.
5. Incorrect deferred_tx_wq release on the error paths by using devres
API(devm_add_action_or_reset) to manage the release in the error path.
* tag 'scmi-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Use devres to allocate the dedicated deferred_tx_wq polling workqueue so
as to automatically trigger the proper resource release on error path.
Reported-by: Dan Carpenter <[email protected]>
Fixes: 5a3b7185c47c ("firmware: arm_scmi: Add atomic mode support to virtio transport")
Signed-off-by: Cristian Marussi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sudeep Holla <[email protected]>
|
|
SCMI virtio transport device managed allocations must use the main
platform device in devres operations instead of the channel devices.
Cc: Peter Hilber <[email protected]>
Fixes: 46abe13b5e3d ("firmware: arm_scmi: Add virtio transport")
Signed-off-by: Cristian Marussi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sudeep Holla <[email protected]>
|
|
SCMI Rx channels are optional and they can fail to be setup when not
present but anyway channels setup routines must bail-out on memory errors.
Make channels setup, and related probing, fail when memory errors are
reported on Rx channels.
Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Cristian Marussi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sudeep Holla <[email protected]>
|
|
SCMI transports based on shared memory, at start of transmissions, have
to wait for the shared Tx channel area to be eventually freed by the
SCMI platform before accessing the channel. In fact the channel is owned
by the SCMI platform until marked as free by the platform itself and,
as such, cannot be used by the agent until relinquished.
As a consequence a badly misbehaving SCMI platform firmware could lock
the channel indefinitely and make the kernel side SCMI stack loop
forever waiting for such channel to be freed, possibly hanging the
whole boot sequence.
Add a timeout to the existent Tx waiting spin-loop so that, when the
system ends up in this situation, the SCMI stack can at least bail-out,
nosily warn the user, and abort the transmission.
Reported-by: YaxiongTian <[email protected]>
Suggested-by: YaxiongTian <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Etienne Carriere <[email protected]>
Cc: Florian Fainelli <[email protected]>
Signed-off-by: Cristian Marussi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Suppress the capability to unbind the core SCMI driver since all the
SCMI stack protocol drivers depend on it.
Fixes: aa4f886f3893 ("firmware: arm_scmi: add basic driver infrastructure for SCMI")
Signed-off-by: Cristian Marussi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Platform drivers .remove callbacks are not supposed to fail and report
errors. Such errors are indeed ignored by the core platform drivers
and the driver unbind process is anyway completed.
The SCMI core platform driver as it is now, instead, bails out reporting
an error in case of an explicit unbind request.
Fix the removal path by adding proper device links between the core SCMI
device and the SCMI protocol devices so that a full SCMI stack unbind is
triggered when the core driver is removed. The remove process does not
bail out anymore on the anomalous conditions triggered by an explicit
unbind but the user is still warned.
Reported-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Cristian Marussi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Commit 8a254d90a775 ("efi: efivars: Fix variable writes without
query_variable_store()") addressed an issue that was introduced during
the EFI variable store refactor, where alternative implementations of
the efivars layer that lacked query_variable_store() would no longer
work.
Unfortunately, there is another case to consider here, which was missed:
if the efivars layer is backed by the EFI runtime services as usual, but
the EFI implementation predates the introduction of QueryVariableInfo(),
we will return EFI_UNSUPPORTED, and this is no longer being dealt with
correctly.
So let's fix this, and while at it, clean up the code a bit, by merging
the check_var_size() routines as well as their callers.
Cc: <[email protected]> # v6.0
Fixes: bbc6d2c6ef22 ("efi: vars: Switch to new wrapper layer")
Signed-off-by: Ard Biesheuvel <[email protected]>
Tested-by: Aditya Garg <[email protected]>
|
|
Commit b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled
mode during system suspend") uses read_poll_timeout_atomic() macro
in ti_sci_do_xfer() to wait for completion when the system is
suspending. The break condition of the macro is set to "true" which
will cause it break immediately when evaluated, likely before the
TISCI xfer is completed, and always return 0. We want to poll here
until "done_state == true".
1) Change the break condition of read_poll_timeout_atomic() to
the bool variable "done_state".
2) The read_poll_timeout_atomic() returns 0 if the break condition
is met or -ETIMEDOUT if not. Since our break condition has changed
to "done_state", we also don't have to check for "!done_state" when
evaluating the return value.
Fixes: b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend")
Signed-off-by: Georgi Vlaev <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Usages of the 'res_map' bitmap is protected with a spinlock, so non-atomic
functions can be used to set/clear bits.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/fb7edc555b6fa7c74707f13e422196693a834bc8.1657308216.git.christophe.jaillet@wanadoo.fr
|
|
Use devm_bitmap_zalloc() instead of hand-writing them.
It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/3ee11e9e83f7c1552d237f5c28f554319fcbbf1f.1657308216.git.christophe.jaillet@wanadoo.fr
|
|
The firmware allows to query for its clocks the operating range of a
given clock. We'll need this for some drivers (KMS, in particular) to
infer the state of some configuration options, so let's create a
function to do so.
Acked-by: Stephen Boyd <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
A significant number of RaspberryPi drivers using the firmware don't
have a phandle to it, so end up scanning the device tree to find a node
with the firmware compatible.
That code is duplicated everywhere, so let's introduce a helper instead.
Acked-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
The CPU and BPMP inter-processor communication code is only partially
endian-aware, so it doesn't work properly when run on a big-endian CPU
anyway. Running Tegra SoCs in big-endian mode has also never been
supported, especially not on those with 64-bit ARM processors.
If big-endian support ever becomes necessary this can be added back but
will need additional fixes for completeness.
Signed-off-by: Thierry Reding <[email protected]>
|
|
The shared memory used for inter-processor communication between the CPU
and the BPMP can reside either in system memory or in I/O memory. Use
the iosys-map helpers to abstract these differences away.
Signed-off-by: Thierry Reding <[email protected]>
|
|
The canonical type for 32-bit unsigned integers in the kernel is u32, so
use that instead of uint32_t.
Signed-off-by: Thierry Reding <[email protected]>
|
|
EFI runtime services data is guaranteed to be preserved by the OS,
making it a suitable candidate for the EFI random seed table, which may
be passed to kexec kernels as well (after refreshing the seed), and so
we need to ensure that the memory is preserved without support from the
OS itself.
However, runtime services data is intended for allocations that are
relevant to the implementations of the runtime services themselves, and
so they are unmapped from the kernel linear map, and mapped into the EFI
page tables that are active while runtime service invocations are in
progress. None of this is needed for the RNG seed.
So let's switch to EFI 'ACPI reclaim' memory: in spite of the name,
there is nothing exclusively ACPI about it, it is simply a type of
allocation that carries firmware provided data which may or may not be
relevant to the OS, and it is left up to the OS to decide whether to
reclaim it after having consumed its contents.
Given that in Linux, we never reclaim these allocations, it is a good
choice for the EFI RNG seed, as the allocation is guaranteed to survive
kexec reboots.
One additional reason for changing this now is to align it with the
upcoming recommendation for EFI bootloader provided RNG seeds, which
must not use EFI runtime services code/data allocations.
Cc: <[email protected]> # v4.14+
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
We no longer need at least 64 bytes of random seed to permit the early
crng init to complete. The RNG is now based on Blake2s, so reduce the
EFI seed size to the Blake2s hash size, which is sufficient for our
purposes.
While at it, drop the READ_ONCE(), which was supposed to prevent size
from being evaluated after seed was unmapped. However, this cannot
actually happen, so READ_ONCE() is unnecessary here.
Cc: <[email protected]> # v4.14+
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Jason A. Donenfeld <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
|