aboutsummaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)AuthorFilesLines
2023-04-10Merge 6.3-rc6 into char-misc-nextGreg Kroah-Hartman20-47/+184
We need it here to apply other char/misc driver changes to. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-04-08irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4Shanker Donthineni2-23/+31
The T241 platform suffers from the T241-FABRIC-4 erratum which causes unexpected behavior in the GIC when multiple transactions are received simultaneously from different sources. This hardware issue impacts NVIDIA server platforms that use more than two T241 chips interconnected. Each chip has support for 320 {E}SPIs. This issue occurs when multiple packets from different GICs are incorrectly interleaved at the target chip. The erratum text below specifies exactly what can cause multiple transfer packets susceptible to interleaving and GIC state corruption. GIC state corruption can lead to a range of problems, including kernel panics, and unexpected behavior. >From the erratum text: "In some cases, inter-socket AXI4 Stream packets with multiple transfers, may be interleaved by the fabric when presented to ARM Generic Interrupt Controller. GIC expects all transfers of a packet to be delivered without any interleaving. The following GICv3 commands may result in multiple transfer packets over inter-socket AXI4 Stream interface: - Register reads from GICD_I* and GICD_N* - Register writes to 64-bit GICD registers other than GICD_IROUTERn* - ITS command MOVALL Multiple commands in GICv4+ utilize multiple transfer packets, including VMOVP, VMOVI, VMAPP, and 64-bit register accesses." This issue impacts system configurations with more than 2 sockets, that require multi-transfer packets to be sent over inter-socket AXI4 Stream interface between GIC instances on different sockets. GICv4 cannot be supported. GICv3 SW model can only be supported with the workaround. Single and Dual socket configurations are not impacted by this issue and support GICv3 and GICv4." Link: https://developer.nvidia.com/docs/t241-fabric-4/nvidia-t241-fabric-4-errata.pdf Writing to the chip alias region of the GICD_In{E} registers except GICD_ICENABLERn has an equivalent effect as writing to the global distributor. The SPI interrupt deactivate path is not impacted by the erratum. To fix this problem, implement a workaround that ensures read accesses to the GICD_In{E} registers are directed to the chip that owns the SPI, and disable GICv4.x features. To simplify code changes, the gic_configure_irq() function uses the same alias region for both read and write operations to GICD_ICFGR. Co-developed-by: Vikram Sethi <[email protected]> Signed-off-by: Vikram Sethi <[email protected]> Signed-off-by: Shanker Donthineni <[email protected]> Acked-by: Sudeep Holla <[email protected]> (for SMCCC/SOC ID bits) Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07efi/cper: Remove unnecessary aer.h includeBjorn Helgaas1-1/+0
<linux/aer.h> is unused, so remove it. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Ard Biesheuvel <[email protected]>
2023-04-07firmware: turris-mox-rwtm: make kobj_type structure constantThomas Weißschuh1-1/+1
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definition to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <[email protected]> Reviewed-by: Marek Behún <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2023-04-05efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernelHuacai Chen1-17/+7
Since Linux-6.3, LoongArch supports PIE kernel now, so let's reintroduce efi_relocate_kernel() to relocate the core kernel. Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2023-04-05firmware: arm_scmi: Add support for unidirectional mailbox channelsCristian Marussi1-11/+84
Extend the SCMI transport layer to support mailbox controllers that expose communication channels that are unidirectional by nature. Signed-off-by: Cristian Marussi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]>
2023-04-04firmware: Use of_property_present() for testing DT property presenceRob Herring2-4/+4
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <[email protected]> Acked-by: Sudeep Holla <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2023-04-03firmware: tegra: bpmp: Fix error paths in debugfsMikko Perttunen1-4/+8
Some error paths in mrq_debug_read and bpmp_debug_show would overwrite the return error code with a subsequent call to mrq_debug_close. Change the code to only change the error code if there was no prior error. Signed-off-by: Mikko Perttunen <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2023-04-03firmware: cs_dsp: Add a debugfs entry containing control detailsSimon Trimmer1-0/+31
The file named 'controls' in the DSP's debugfs root contains a formatted table describing the controls defined within the loaded DSP firmware, it is of the form name: len region:offset addr fwname algid ctltype flags en dirty Where flags is represented as a character for each flag if set, or '-', enabled is whether the control is enabled or disabled and dirty is whether the control value is set in the cache but not the hardware. Signed-off-by: Simon Trimmer <[email protected]> Signed-off-by: Richard Fitzgerald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-03-28firmware: arm_sdei: Fix sleep from invalid context BUGPierre Gondois1-17/+20
Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/[email protected]/ Suggested-by: James Morse <[email protected]> Signed-off-by: Pierre Gondois <[email protected]> Reviewed-by: James Morse <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2023-03-27firmware: meson_sm: populate platform devices from sm device tree dataDmitry Rokosov1-1/+4
In some meson boards, secure monitor device has children, for example, power secure controller. By default, secure monitor isn't the bus in terms of device tree subsystem, so the of_platform initialization code doesn't populate its device tree data. As a result, secure monitor's children aren't probed at all. Run the 'of_platform_populate()' routine manually to resolve such issues. Signed-off-by: Dmitry Rokosov <[email protected]> Acked-by: Martin Blumenstingl <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-03-27firmware: arm_scmi: Fix xfers allocation on Rx channelCristian Marussi1-1/+1
Two distinct pools of xfer descriptors are allocated at initialization time: one (Tx) used to provide xfers to track commands and their replies (or delayed replies) and another (Rx) to pick xfers from to be used for processing notifications. Such pools, though, are allocated globally to be used by the whole SCMI instance, they are not allocated per-channel and as such the allocation of notifications xfers cannot be simply skipped if no Rx channel was found for the base protocol common channel, because there could be defined more optional per-protocol dedicated channels that instead support Rx channels. Change the conditional check to skip allocation for the notification pool only if no Rx channel has been detected on any per-channel protocol at all. Fixes: 4ebd8f6dea81 ("firmware: arm_scmi: Add receive buffer support for notifications") Signed-off-by: Cristian Marussi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]>
2023-03-24Merge tag 'arm-fixes-6.3-2' of ↵Linus Torvalds4-10/+46
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "As usual, most of the bug fixes address issues in the devicetree files, and out of these, most are for the Qualcomm and NXP platforms, including: - A missing 'reserved-memory' property on LG G Watch R that is needed to prevent clashing with firmware - Annotations for cache coherency on multiple machines - Corrections for pinctrl, regulator, clock, iommu and power domain properties for i.MX and Qualcomm to correctly reflect the hardware settings - Firmware file names on multiple machines SA8540P Ride board - An incompatible change to the qcom vadc driver requires adding individual labels - Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property and switch to the new bindings. - A fix for PCI bus address translation Tegra194 and Tegra234. There are also a couple of device driver fixes, addressing: - A race condition in the amdtee driver - A performance regression in the Qualcomm 'llcc' driver - An unitialized variable use NXP i.MX 'weim' driver - Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and the Arm scmi firmware driver" * tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes bus: imx-weim: fix branch condition evaluates to a garbage value arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl arm64: dts: imx93: Fix eqos properties arm64: dts: imx8mp: Fix LCDIF2 node clock order arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio firmware: qcom: scm: fix bogus irq error at probe arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address ...
2023-03-24Merge tag 'efi-fixes-for-v6.3-1' of ↵Linus Torvalds16-37/+138
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - Set the NX compat flag for arm64 and zboot, to ensure compatibility with EFI firmware that complies with tightening requirements imposed across the ecosystem. - Improve identification of Ampere Altra systems based on SMBIOS data. - Fix some issues related to the EFI framebuffer that were introduced as a result from some refactoring related to zboot and the merge with sysfb. - Makefile tweak to avoid rebuilding vmlinuz unnecessarily. - Fix efi_random_alloc() return value on out of memory condition. * tag 'efi-fixes-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failure efi/libstub: Use relocated version of kernel's struct screen_info efi/libstub: zboot: Add compressed image to make targets efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L efi: sysfb_efi: Fix DMI quirks not working for simpledrm efi/libstub: smbios: Drop unused 'recsize' parameter arm64: efi: Use SMBIOS processor version to key off Ampere quirk efi/libstub: smbios: Use length member instead of record struct size efi: earlycon: Reprobe after parsing config tables arm64: efi: Set NX compat flag in PE/COFF header efi/libstub: arm64: Remap relocated image with strict permissions efi/libstub: zboot: Mark zboot EFI application as NX compatible
2023-03-24Merge tag 'qcom-driver-fixes-for-6.3' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes Qualcomm driver fixes for v6.3 Support for the secure world interrupting the SCM driver drive the wait queue mechanism was recently introduced, but most platforms doesn't have this mechanism and an error should not be printed in the log. The rmtfs_mem driver recently gained support for assigning the region to multiple VMIDs, but accidentally removed the support for running without assignment. A couple of changes are introducd to correct this. The SC8280XP LLCC slice configuration is wrong, reslting in incorrect configuration of the hardware. The table is corrected, based on the datasheet. * tag 'qcom-driver-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: firmware: qcom: scm: fix bogus irq error at probe soc: qcom: rmtfs: handle optional qcom,vmid correctly soc: qcom: rmtfs: fix error handling reading qcom,vmid soc: qcom: llcc: Fix slice configuration values for SC8280XP Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-03-23efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failureArd Biesheuvel1-0/+1
The logic in efi_random_alloc() will iterate over the memory map twice, once to count the number of candidate slots, and another time to locate the chosen slot after randomization. If there is insufficient memory to do the allocation, the second loop will run to completion without actually having located a slot, but we currently return EFI_SUCCESS in this case, as we fail to initialize status to the appropriate error value of EFI_OUT_OF_RESOURCES. Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-23efi/libstub: Use relocated version of kernel's struct screen_infoArd Biesheuvel6-14/+21
In some cases, we expose the kernel's struct screen_info to the EFI stub directly, so it gets populated before even entering the kernel. This means the early console is available as soon as the early param parsing happens, which is nice. It also means we need two different ways to pass this information, as this trick only works if the EFI stub is baked into the core kernel image, which is not always the case. Huacai reports that the preparatory refactoring that was needed to implement this alternative method for zboot resulted in a non-functional efifb earlycon for other cases as well, due to the reordering of the kernel image relocation with the population of the screen_info struct, and the latter now takes place after copying the image to its new location, which means we copy the old, uninitialized state. So let's ensure that the same-image version of alloc_screen_info() produces the correct screen_info pointer, by taking the displacement of the loaded image into account. Reported-by: Huacai Chen <[email protected]> Tested-by: Huacai Chen <[email protected]> Link: https://lore.kernel.org/linux-efi/[email protected]/ Fixes: 42c8ea3dca094ab8 ("efi: libstub: Factor out EFI stub entrypoint into separate file") Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-21firmware: qcom_scm: Add SM6375 compatibleKonrad Dybcio1-0/+1
While it was introduced in bindings, requiring a core clock, and added into the DT, this compatible was apparently forgotten about on the driver side of things. Fix it. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-21efi/libstub: zboot: Add compressed image to make targetsArd Biesheuvel1-1/+1
Avoid needlessly rebuilding the compressed image by adding the file 'vmlinuz' to the 'targets' Kbuild make variable. Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-21firmware: cs_dsp: Support DSPs that don't require firmware downloadSimon Trimmer1-0/+3
When a DSP can self-boot from ROM it is not necessary to download firmware during the powering up sequence. A DSP that required firmware download would fail in a previous configuration step if firmware was not available. Signed-off-by: Simon Trimmer <[email protected]> Signed-off-by: Richard Fitzgerald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-03-21firmware: cs_dsp: Introduce no_core_startstop for self-booting DSPsSimon Trimmer1-1/+13
There are devices containing Halo Core DSPs that self-boot, cs_dsp is used to manage the running firmware but the host does not have direct control over starting and stopping the DSP and so cs_dsp should consider the DSP to be always running. Signed-off-by: Simon Trimmer <[email protected]> Signed-off-by: Richard Fitzgerald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-03-20Merge 6.3-rc3 into char-misc-nextGreg Kroah-Hartman1-1/+1
We need the mainline fixes in this branch for testing and other subsystem changes to be based properly on. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-19firmware: qcom_scm: Clear download bit during rebootMukesh Ojha1-2/+1
During normal restart of a system download bit should be cleared irrespective of whether download mode is set or not. Fixes: 8c1b7dc9ba22 ("firmware: qcom: scm: Expose download-mode control") Signed-off-by: Mukesh Ojha <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-18efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/LHans de Goede1-0/+8
Another Lenovo convertable which reports a landscape resolution of 1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes. Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-18efi: sysfb_efi: Fix DMI quirks not working for simpledrmHans de Goede3-3/+8
Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init() from before the [sysfb_]parse_mode() call to after it. But sysfb_apply_efi_quirks() modifies the global screen_info struct which [sysfb_]parse_mode() parses, so doing it later is too late. This has broken all DMI based quirks for correcting wrong firmware efifb settings when simpledrm is used. To fix this move the sysfb_apply_efi_quirks() call back to its old place and split the new setup of the efifb_fwnode (which requires the platform_device) into its own function and call that at the place of the moved sysfb_apply_efi_quirks(pd) calls. Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") Cc: [email protected] Cc: Javier Martinez Canillas <[email protected]> Cc: Thomas Zimmermann <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-18efi/libstub: smbios: Drop unused 'recsize' parameterArd Biesheuvel2-4/+3
We no longer use the recsize argument for locating the string table in an SMBIOS record, so we can drop it from the internal API. Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-18arm64: efi: Use SMBIOS processor version to key off Ampere quirkArd Biesheuvel3-13/+80
Instead of using the SMBIOS type 1 record 'family' field, which is often modified by OEMs, use the type 4 'processor ID' and 'processor version' fields, which are set to a small set of probe-able values on all known Ampere EFI systems in the field. Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...") Tested-by: Andrea Righi <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-18efi/libstub: smbios: Use length member instead of record struct sizeArd Biesheuvel1-1/+1
The type 1 SMBIOS record happens to always be the same size, but there are other record types which have been augmented over time, and so we should really use the length field in the header to decide where the string table starts. Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...") Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-15firmware: qcom_scm: Use fixed width src vm bitmapElliot Berman1-5/+7
The maximum VMID for assign_mem is 63. Use a u64 to represent this bitmap instead of architecture-dependent "unsigned int" which varies in size on 32-bit and 64-bit platforms. Acked-by: Kalle Valo <[email protected]> (ath10k) Tested-by: Gokul krishna Krishnakumar <[email protected]> Signed-off-by: Elliot Berman <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-13efi: earlycon: Reprobe after parsing config tablesArd Biesheuvel2-3/+16
Commit 732ea9db9d8a ("efi: libstub: Move screen_info handling to common code") reorganized the earlycon handling so that all architectures pass the screen_info data via a EFI config table instead of populating struct screen_info directly, as the latter is only possible when the EFI stub is baked into the kernel (and not into the decompressor). However, this means that struct screen_info may not have been populated yet by the time the earlycon probe takes place, and this results in a non-functional early console. So let's probe again right after parsing the config tables and populating struct screen_info. Note that this means that earlycon output starts a bit later than before, and so it may fail to capture issues that occur while doing the early EFI initialization. Fixes: 732ea9db9d8a ("efi: libstub: Move screen_info handling to common code") Reported-by: Shawn Guo <[email protected]> Tested-by: Shawn Guo <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-10efi/libstub: arm64: Remap relocated image with strict permissionsArd Biesheuvel1-0/+1
After relocating the executable image, use the EFI memory attributes protocol to remap the code and data regions with the appropriate permissions. Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-10efi/libstub: zboot: Mark zboot EFI application as NX compatibleArd Biesheuvel1-1/+1
Now that the zboot loader will invoke the EFI memory attributes protocol to remap the decompressed code and rodata as read-only/executable, we can set the PE/COFF header flag that indicates to the firmware that the application does not rely on writable memory being executable at the same time. Cc: <[email protected]> # v6.2+ Signed-off-by: Ard Biesheuvel <[email protected]>
2023-03-09firmware: qcom: scm: fix bogus irq error at probeJohan Hovold1-1/+1
A recent commit added support for an optional interrupt which is only available on some platforms. Stop spamming the logs with bogus error messages on platforms that do not use this new optional resource: qcom_scm firmware:scm: error -ENXIO: IRQ index 0 not found Fixes: 6bf325992236 ("firmware: qcom: scm: Add wait-queue handling logic") Cc: Guru Das Srinagesh <[email protected]> Cc: Sibi Sankar <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Tested-by: Steev Klimaszewski <[email protected]> # Thinkpad X13s Acked-by: Guru Das Srinagesh <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-09edd: make kobj_type structure constantThomas Weißschuh1-1/+1
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definition to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-09firmware: xilinx: don't make a sleepable memory allocation from an atomic ↵Roman Gushchin1-1/+1
context The following issue was discovered using lockdep: [ 6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209 [ 6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0 [ 6.702431] 2 locks held by swapper/0/1: [ 6.706300] #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90 [ 6.714900] #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140 [ 6.723156] irq event stamp: 304030 [ 6.726596] hardirqs last enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0 [ 6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140 [ 6.744742] softirqs last enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894 [ 6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280 [ 6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G U 5.15.36 #2 [ 6.768048] Hardware name: xlnx,zynqmp (DT) [ 6.772179] Call trace: [ 6.774584] dump_backtrace+0x0/0x300 [ 6.778197] show_stack+0x18/0x30 [ 6.781465] dump_stack_lvl+0xb8/0xec [ 6.785077] dump_stack+0x1c/0x38 [ 6.788345] ___might_sleep+0x1a8/0x2a0 [ 6.792129] __might_sleep+0x6c/0xd0 [ 6.795655] kmem_cache_alloc_trace+0x270/0x3d0 [ 6.800127] do_feature_check_call+0x100/0x220 [ 6.804513] zynqmp_pm_invoke_fn+0x8c/0xb0 [ 6.808555] zynqmp_pm_clock_getstate+0x90/0xe0 [ 6.813027] zynqmp_pll_is_enabled+0x8c/0x120 [ 6.817327] zynqmp_pll_enable+0x38/0xc0 [ 6.821197] clk_core_enable+0x144/0x400 [ 6.825067] clk_core_enable+0xd4/0x400 [ 6.828851] clk_core_enable+0xd4/0x400 [ 6.832635] clk_core_enable+0xd4/0x400 [ 6.836419] clk_core_enable+0xd4/0x400 [ 6.840203] clk_core_enable+0xd4/0x400 [ 6.843987] clk_core_enable+0xd4/0x400 [ 6.847771] clk_core_enable+0xd4/0x400 [ 6.851555] clk_core_enable_lock+0x24/0x50 [ 6.855683] clk_enable+0x24/0x40 [ 6.858952] fclk_probe+0x84/0xf0 [ 6.862220] platform_probe+0x8c/0x110 [ 6.865918] really_probe+0x110/0x5f0 [ 6.869530] __driver_probe_device+0xcc/0x210 [ 6.873830] driver_probe_device+0x64/0x140 [ 6.877958] __driver_attach+0x114/0x1f0 [ 6.881828] bus_for_each_dev+0xe8/0x160 [ 6.885698] driver_attach+0x34/0x50 [ 6.889224] bus_add_driver+0x228/0x300 [ 6.893008] driver_register+0xc0/0x1e0 [ 6.896792] __platform_driver_register+0x44/0x60 [ 6.901436] fclk_driver_init+0x1c/0x28 [ 6.905220] do_one_initcall+0x104/0x590 [ 6.909091] kernel_init_freeable+0x254/0x2bc [ 6.913390] kernel_init+0x24/0x130 [ 6.916831] ret_from_fork+0x10/0x20 Fix it by passing the GFP_ATOMIC gfp flag for the corresponding memory allocation. Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check") Cc: stable <[email protected]> Signed-off-by: Roman Gushchin <[email protected]> Cc: Amit Sunil Dhamne <[email protected]> Cc: Michal Simek <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-09firmware: xilinx: Add pm api function for PL config reg readbackNava kishore Manne1-0/+33
Adds PM API for performing Programmable Logic(PL) configuration register readback. It provides an interface to the firmware(pmufw) to readback the FPGA configuration register. Signed-off-by: Nava kishore Manne <[email protected]> Acked-by: Xu Yilun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-09firmware: dmi-sysfs: make kobj_type structures constantThomas Weißschuh1-2/+2
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-03-08firmware: arm_scmi: Use the bitmap API to allocate bitmapsChristophe JAILLET1-2/+2
Use devm_bitmap_zalloc() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Cristian Marussi <[email protected]> Tested-by: Cristian Marussi <[email protected]> Link: https://lore.kernel.org/r/c073b1607ada34d5bde6ce1009179cf15bbf0da3.1657308593.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sudeep Holla <[email protected]>
2023-03-08firmware: arm_scmi: Fix device node validation for mailbox transportCristian Marussi1-0/+37
When mailboxes are used as a transport it is possible to setup the SCMI transport layer, depending on the underlying channels configuration, to use one or two mailboxes, associated, respectively, to one or two, distinct, shared memory areas: any other combination should be treated as invalid. Add more strict checking of SCMI mailbox transport device node descriptors. Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Cc: <[email protected]> # 4.19 Signed-off-by: Cristian Marussi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]>
2023-03-06firmware: arm_scmi: Fix raw coexistence mode behaviour on failure pathCristian Marussi1-3/+3
When SCMI raw coexistence mode is enabled make the core stack probe successfully even when the initial base protocol exchanges with the platform/server failed. This behaviour enables the system to boot with a broken regular SCMI stack but with a fully functional and accessible SCMI raw debugfs interface that can be used to further debug the issue. Signed-off-by: Cristian Marussi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]>
2023-03-06firmware: arm_scmi: Remove duplicate include header inclusionYe Xingchen1-1/+0
linux/of.h is included more than once, just remove the duplicate include header inclusion. Signed-off-by: Ye Xingchen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]>
2023-03-06firmware: arm_scmi: Return a literal instead of a variableDan Carpenter1-1/+1
In this context "return scmi_dev;" and "return NULL;" are equivalent but it is more readable to return a literal. Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Cristian Marussi <[email protected]> Link: https://lore.kernel.org/r/Y/Yx8pOdf8rNhPVe@kili Signed-off-by: Sudeep Holla <[email protected]>
2023-03-06firmware: arm_scmi: Clean up a return statement in scmi_probeDan Carpenter1-2/+2
The comments say "enabled" where "disabled" is intended. Also it's cleaner to return zero explicitly instead of ret. Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/Y86im5M49p3ePGxj@kili Signed-off-by: Sudeep Holla <[email protected]>
2023-03-06firmware: imx: scu-pd: add missed lvds lpi2c and pwm power domainsClark Wang1-0/+4
LVDS' lpi2c and pwm power domains definitions are missed. Add them here. Signed-off-by: Clark Wang <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2023-03-06firmware: imx: scu: use dev_err_probeAlexander Stein1-3/+2
This simplifies the code and silences -517 error messages. Also the reason is listed in /sys/kernel/debug/devices_deferred. Signed-off-by: Alexander Stein <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2023-02-27Merge tag 'soc-drivers-6.3' of ↵Linus Torvalds18-573/+2908
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...
2023-02-24Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
2023-02-24Merge tag 'char-misc-6.3-rc1' of ↵Linus Torvalds4-26/+25
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits) scripts/tags.sh: fix incompatibility with PCRE2 firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries mei: lower the log level for non-fatal failed messages mei: bus: disallow driver match while dismantling device misc: vmw_balloon: fix memory leak with using debugfs_lookup() nvmem: stm32: fix OPTEE dependency dt-bindings: nvmem: qfprom: add IPQ8074 compatible nvmem: qcom-spmi-sdam: register at device init time nvmem: rave-sp-eeprm: fix kernel-doc bad line warning nvmem: stm32: detect bsec pta presence for STM32MP15x nvmem: stm32: add OP-TEE support for STM32MP13x nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() nvmem: core: add nvmem_add_one_cell() nvmem: core: drop the removal of the cells in nvmem_add_cells() nvmem: core: move struct nvmem_cell_info to nvmem-provider.h nvmem: core: add an index parameter to the cell of: property: add #nvmem-cell-cells property of: property: make #.*-cells optional for simple props of: base: add of_parse_phandle_with_optional_args() net: add helper eth_addr_add() ...
2023-02-23Merge tag 'efi-next-for-v6.3' of ↵Linus Torvalds12-59/+232
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "A healthy mix of EFI contributions this time: - Performance tweaks for efifb earlycon (Andy) - Preparatory refactoring and cleanup work in the efivar layer, which is needed to accommodate the Snapdragon arm64 laptops that expose their EFI variable store via a TEE secure world API (Johan) - Enhancements to the EFI memory map handling so that Xen dom0 can safely access EFI configuration tables (Demi Marie) - Wire up the newly introduced IBT/BTI flag in the EFI memory attributes table, so that firmware that is generated with ENDBR/BTI landing pads will be mapped with enforcement enabled - Clean up how we check and print the EFI revision exposed by the firmware - Incorporate EFI memory attributes protocol definition and wire it up in the EFI zboot code (Evgeniy) This ensures that these images can execute under new and stricter rules regarding the default memory permissions for EFI page allocations (More work is in progress here) - CPER header cleanup (Dan Williams) - Use a raw spinlock to protect the EFI runtime services stack on arm64 to ensure the correct semantics under -rt (Pierre) - EFI framebuffer quirk for Lenovo Ideapad (Darrell)" * tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3 arm64: efi: Make efi_rt_lock a raw_spinlock efi: Add mixed-mode thunk recipe for GetMemoryAttributes efi: x86: Wire up IBT annotation in memory attributes table efi: arm64: Wire up BTI annotation in memory attributes table efi: Discover BTI support in runtime services regions efi/cper, cxl: Remove cxl_err.h efi: Use standard format for printing the EFI revision efi: Drop minimum EFI version check at boot efi: zboot: Use EFI protocol to remap code/data with the right attributes efi/libstub: Add memory attribute protocol definitions efi: efivars: prevent double registration efi: verify that variable services are supported efivarfs: always register filesystem efi: efivars: add efivars printk prefix efi: Warn if trying to reserve memory under Xen efi: Actually enable the ESRT under Xen efi: Apply allowlist to EFI configuration tables when running under Xen efi: xen: Implement memory descriptor lookup based on hypercall efi: memmap: Disregard bogus entries instead of returning them ...
2023-02-22Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-6/+37
Pull drm updates from Dave Airlie: "There are a bunch of changes all over in the usual places. Highlights: - habanalabs moves from misc to accel - first accel driver for Intel VPU (Versatile Processing Unit) inference engine - dropped all the ancient legacy DRI1 drivers. I think it's been at least 10 years since anyone has heard about these. - Intel DG2 updates and prelim Meteorlake enablement - etnaviv adds support for Versilicon NPU device (a GPU like engine with inference accelerators) Detailed summary: Removals: - remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via New driver: - intel VPU accelerator driver - habanalabs comes via drm tree now drm/core: - use drm_dbg_ helpers in several places - Document defaults for CRTC backgrounds - Document use of drm_minor edid: - improve mode parsing and refactoring connector: - support analog TV mode property media: - add some common formats udmabuf: - add vmap/vunmap methods fourcc: - add XRGB1555 and RGB565 formats - document open source user waiver firmware: - fix color-format selection for system framebuffer format-helper: - Add conversion from XRGB8888 to various sysfb formats - Make XRGB8888 the only driver-emulated legacy format - Add conversion from XRGB8888 to XBGR8888 and ABGR8888 fb-helper: - fix preferred depth and bpp values across drivers - Avoid blank consoles from selecting an incorrect color format probe-helper: - Enable/disable HPD on connectors scheduler: - Fix lockup in drm_sched_entity_kill() - Deprecate drm_sched_resubmit_jobs() bridge: - remove unused functions - implement i2c probe_new in various drivers - ite-it6505: Locking fixes, Cache EDID data - ite-it66121: Support IT6610 chip - lontium-tl9611: Fix HDMI on DragonBoard 845c - parade-ps8640: Use atomic bridge functions - Support i.MX93 LDB plus DT bindings debugfs: - add per device helpers and convert drivers displayport: - mst fixes - add DP adaptive sync DPCD definitions fbdev: - always pick 32bpp as default - remove some unused code simpledrm: - support system memory framebuffers panel: - add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 - Use ktime_get_boottime() to measure power-down delay - Fix auto-suspend delay - Visionox VTDR6130 AMOLED DSI - Support Himax HX8394 - Convert many drivers to common generic DSI write-sequence helper - AUO A030JTN01 ttm: - drop bo wait wrapper - fix MIPS build habanalabs: - moved driver to accel subsystem - gaudi2 decoder error improvement - more trace events - Gaudi2 abrupt reset by firmware support - add uAPI to flush memory transactions - add uAPI to pass through userspace reqs to fw - remove dma-buf export by handle amdgpu: - add new INFO queries for peak and min sclk/mclk for profile modes - Add PCIe info to the INFO IOCTL - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Allow 0 as a vram limit on APUs - Handle profiling modes for SMU13.x - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - Fix power reporting on certain firmwares for CZN/RN - Allow S0ix without BIOS support - Enable freesync over PCon - Re-enable the AGP aperture on GMC 11.x amdkfd: - Error handling fixes - PASID fixes - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Switch 1 element arrays to flexible arrays - Fix memory leak on shutdown - move to new logging i915: - Meteorlake display/OA/GSC fw/workarounds enabling - DP MST DSC support - Gamma/degamma readout support for the state checker - Enable SDP split support for DP 2.0 - Add probe blocking support to i915.force_probe parameter - Enable Xe HP 4tile support - Avoid display direct calls to uncore - Fix HuC delayed load memory leaks - Add DG2 workarounds Wa_18018764978 and Wa_18019271663 - Improve suspend / resume times with VT-d scanout workaround active - Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state - Fix TLB invalidation for Gen12.50 video and compute engines - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid - Start using unversioned DMC firmware paths for new platforms - ELD refactor: Stop using hardware buffer, precompute ELD - lots of display code refactoring nouveau: - drop legacy ioctl support - replace 0-sized array msm: - dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform - Added bindings for SM8150 - dpu: Partial support for DSC on SM8150 and SM8250 - dpu: Fixed color transformation matrix being lost on suspend/resume - dp: Support SDM845 and SC8280XP platforms - dp: Support for limiting DP link rate via DT property - dsi: Validate display modes according to the DSI OPP table - dsi: DSI PHY support for the SM6375 platform - Add MSM_SUBMIT_BO_NO_IMPLICI - a2xx: Support to load legacy firmware - a6xx: GPU devcore dump updates for a650/a660 - GPU devfreq tuning and fixes - Turn 8960 HDMI PHY into clock provider, - Make 8960 HDMI PHY use PXO clock from DT etnaviv: - experimental versilicon NPU support - report GPU load via fdinfo format - MMU fault message improvements tegra: - rework syncpoint interrupt mediatek: - DSI timing fix - fix config deps ast: - various fixes exynos: - restore bridge chain order fixes gud: - convert to shadow plane buffers - perform flushing synchronously during atomic update - Use new debugfs helpers arm/hdlcd: - Use new debugfs helper ili9486: - Support 16-bit pixel data imx: - Split off IPUv3 driver mipi-dbi: - convert to DRM shadow-plane helpers - rsp driver changes - Support separate I/O-voltage supply mxsfb: - Depend on ARCH_MXS or ARCH_MXC sun4i: - convert to new TV mode property vc4: - convert to new TV mode property - kunit tests - Support RGB565 and RGB666 formats - convert dsi driver to bridge - Various HVS an CRTC fixes v3d: - Do not opencode drm_gem_object_lookup() virtio: - improve tracing vkms: - support small cursors in IGT tests - Fix SEGFAULT from incorrect GEM-buffer mapping rcar-du: - fixes and improvements" * tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits) msm/fbdev: fix unused variable warning with clang. drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini() dma-buf: make kobj_type structure constant drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() drm/amd/display: disable SubVP + DRR to prevent underflow drm/amd/display: Fail atomic_check early on normalize_zpos error drm/amd/pm: avoid unaligned access warnings drm/amd/display: avoid unaligned access warnings drm/amd/display: Remove duplicate/repeating expressions drm/amd/display: Remove duplicate/repeating expression drm/amd/display: Make variables declaration inside ifdef guard drm/amd/display: Fix excess arguments on kernel-doc drm/amd/display: Add previously missing includes drm/amd/amdgpu: Add function prototypes to headers drm/amd/display: Add function prototypes to headers drm/amd/display: Turn global functions into static drm/amd/display: remove unused _calculate_degamma_curve function drm/amd/display: remove unused func declaration from resource headers drm/amd/display: unset initial value for tf since it's never used drm/amd/display: camel case cleanup in color_gamma file ...
Powered by cgit, Gruvboxed by Blaster4385.