| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I
found after restarting my randconfig build testing that had been
dormant for a while.
On the Nokia N950/N9 phone, a DT fix is required to address a boot
regression.
For the bcm283x (Raspberry Pi), two DT fixes address minor issues"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: imx8: select SOC_BUS
soc: tegra: fix tegra_pmc_get_suspend_mode definition
soc: fsl: dpio: avoid stack usage warning
soc: fsl: dpio: fix incorrect pointer conversions
ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y
ARM: dts: bcm283x: Disable dsi0 node
firmware: xilinx: make firmware_debugfs_root static
drivers: soc: xilinx: fix firmware driver Kconfig dependency
ARM: dts: bcm283x: Add cells encoding format to firmware bus
ARM: dts: OMAP3: disable RNG on N950/N9
|
|
The header of the message to send can be changed if the
response is longer than the request:
- 1st word, the header is sent
- the remaining words of the message are sent
- the response is received asynchronously during the
execution of the loop, changing the size field in
the header
- the for loop test the termination condition using
the corrupted header
It is the case for the API build_info which has just a
header as request but 3 words in response.
This issue is fixed storing the header locally instead of
using a pointer on it.
Fixes: edbee095fafb (firmware: imx: add SCU firmware driver support)
Signed-off-by: Franck LENORMAND <[email protected]>
Reviewed-by: Leonard Crestez <[email protected]>
Signed-off-by: Leonard Crestez <[email protected]>
Cc: [email protected]
Reviewed-by: Dong Aisheng <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Most of the arm-stub code is written in an architecture independent manner.
As a result, RISC-V can reuse most of the arm-stub code.
Rename the arm-stub.c to efi-stub.c so that ARM, ARM64 and RISC-V can use it.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The Tegra BPMP driver typically ends up deferring probe because it wants
to attach to the SMMU, so there's little sense in registering it at the
core init-level.
One side-effect of this is that the driver will be probed later even if
it doesn't want to attach to an SMMU, which means that consumers will
end up deferring probe, which in turn takes care of ordering the suspend
and resume queue in the correct way. Currently since suspend/resume
order depends on instantiation order, and because BPMP is listed at the
very end of the device tree (after most of its consumers), the suspend
and resume queue is ordered wrongly, which can cause issues for drivers
(like I2C) which suspend after and resume before BPMP. In the case of
I2C this typically leads to the clock failing to enable.
Besides fixing this suspend/resume ordering issue, this also has the
added benefit of allowing the driver to be built as a loadable module,
which can help decrease the size of multiplatform kernel.
Signed-off-by: Thierry Reding <[email protected]>
|
|
As far as the device is concerned the dma address is the physical
address. There is no need to convert it to a physical address,
especially not using dma-direct internals that are not available
to drivers and which will interact badly with IOMMUs. Last but not
least the commit introducing it claimed to just fix a type issue,
but actually changed behavior.
Fixes: 6e37ccf78a532 ("firmware: qcom_scm: Use proper types for dma mappings")
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The '>' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/firmware/qcom_scm.c:946:25-30: WARNING: conversion to bool not
needed here
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
SMCCC can return NOT_SUPPORTED(-1). Map it to appropriate Linux error
codes namely -EOPNOTSUPP.
Link: https://lore.kernel.org/r/[email protected]
Reported-and-Tested-by:: Etienne Carriere <[email protected]>
Reviewed-by: Etienne Carriere <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Upon reception of an unexpected bogus delayed response, clear the channel
and bail-out safely.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4d09852b6f01 ("firmware: arm_scmi: Add support for notifications message processing")
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Clear channel properly when done processing a delayed response.
This will let the platform firmware know that the channel is now free to
use it for any new delayed response or notification.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
(sudeep.holla: Updated commit log to reflect that channel is now free for
platform to use)
Signed-off-by: Sudeep Holla <[email protected]>
|
|
When an unexpected response message is received we currently warn the user
and bail-out, ensure to also free the channel by invoking the transport
independent operation .clear_channel()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
SCMI transport operation .clear_notification() is indeed a generic method
to clear the channel in a transport dependent way, as such it could be a
useful helper also in other contexts.
Rename such method as .clear_channel(), renaming accordingly also its
already existent call-sites.
No functional change.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Current imx-scu requires four TX and four RX to communicate with
SCU. This is low efficient and causes lots of mailbox interrupts.
With imx-mailbox driver could support one TX to use all four transmit
registers and one RX to use all four receive registers, imx-scu
could use one TX and one RX.
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
It is nice to allow compile-testing the firmware drivers, but this
fails when the dependency is a loadable module:
aarch64-linux-ld: drivers/firmware/imx/scu-pd.o: in function `imx_sc_pd_power':
scu-pd.c:(.text+0xd8): undefined reference to `imx_scu_call_rpc'
aarch64-linux-ld: scu-pd.c:(.text+0x108): undefined reference to `imx_scu_call_rpc'
aarch64-linux-ld: drivers/firmware/imx/scu-pd.o: in function `imx_sc_pd_probe':
Change the dependencies to ensure that any driver we depend on is
either reachable or we are compile-testing and it is disabled,
effectively reverting most of the previous changes that turned
out to be incorrect.
Fixes: a9f85f93ed73 ("firmware: imx: add COMPILE_TEST support")
Fixes: 5b00b8375416 ("firmware: imx: add COMPILE_TEST for IMX_SCU driver")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Fix the following sparse warning:
drivers/firmware/xilinx/zynqmp-debug.c:38:15: warning: symbol
'firmware_debugfs_root' was not declared. Should it be static?
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Add the mechanisms to distinguish notifications from delayed responses
and command responses. Also add support to properly fetch notification
messages upon reception. Notifications processing does not continue any
further after the fetch phase.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jonathan Cameron <[email protected]>
[Reworked/renamed scmi_handle_xfer_delayed_resp()]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add common transport-layer methods to:
- fetch a notification instead of a response
- clear a pending notification
Add also all the needed support in mailbox/shmem transports.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Viresh Kumar <[email protected]>
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add commands' enumerations and messages definitions for all existing
notify-enable commands across all protocols.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
With all the plumbing in place, let's just add the separate dedicated
receive buffers to handle notifications that can arrive asynchronously
from the platform firmware to OS.
Also add one check to see if the platform supports any receive channels
before allocating the receive buffers: since those buffers are optionally
supported though, the whole xfer initialization is also postponed to be
able to check for their existence in advance.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jonathan Cameron <[email protected]>
[Changed parameters in __scmi_xfer_info_init()]
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
The scmi protocol core driver checks for the channel availability
before evaluating the shmem property. If the individual protocols
don't have separate channel assigned to them, the channel alloted
for the BASE protocol is reused automatically.
Therefore there is no need to check for the shmem property in the
parent node if it is absent in the child protocol node.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Peng Fan <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Instead of declaring the channel availabilty unconditionally, let us
check for the presence of "shmem" property and return the channel
availablity accordingly.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Peng Fan <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
The scmi protocol core driver check for non NULL mark_txdone before
invoking the same. There is no need to provide a empty stub. SMC/HVC
calls are synchronous and the call return indicates the completion.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Peng Fan <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
In order to support multiple SMC/HVC transport channels with associated
shared memory, it is better to maintain the mutex per channel instead of
existing global one.
Move the smc_mutex into the scmi_smc structure and also rename it to
shmem_lock which is more appropriate for it's use.
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Peng Fan <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Use the value of "arm,smc-id" property from the device tree as the first
argument for SMCCC call leaving all the other arguments as zero for now.
There is no Rx, only Tx because of smc/hvc not support Rx.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Peng Fan <[email protected]>
[sudeep.holla: reworded commit log/subject and fixed !HAVE_ARM_SMCCC build]
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Arnd reports that commit
9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine")
reworks the file I/O routines in a way that triggers the following
warning:
drivers/firmware/efi/libstub/file.c:240:1: warning: the frame size
of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=]
We can work around this issue dropping an instance of efi_char16_t[256]
from the stack frame, and reusing the 'filename' field of the file info
struct that we use to obtain file information from EFI (which contains
the file name even though we already know it since we used it to open
the file in the first place)
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit
d5cdf4cfeac9 ("efi/x86: Don't relocate the kernel unless necessary")
tries to avoid relocating the kernel in the EFI stub as far as possible.
However, when systemd-boot is used to boot a unified kernel image [1],
the image is constructed by embedding the bzImage as a .linux section in
a PE executable that contains a small stub loader from systemd that will
call the EFI stub handover entry, together with additional sections and
potentially an initrd. When this image is constructed, by for example
dracut, the initrd is placed after the bzImage without ensuring that at
least init_size bytes are available for the bzImage. If the kernel is
not relocated by the EFI stub, this could result in the compressed
kernel's startup code in head_{32,64}.S overwriting the initrd.
To prevent this, unconditionally relocate the kernel if the EFI stub was
entered via the handover entry point.
[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images
Fixes: d5cdf4cfeac9 ("efi/x86: Don't relocate the kernel unless necessary")
Reported-by: Sergey Shatunov <[email protected]>
Signed-off-by: Arvind Sankar <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit
3ee372ccce4d ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
removed the .bss section from the bzImage.
However, while a PE loader is required to zero-initialize the .bss
section before calling the PE entry point, the EFI handover protocol
does not currently document any requirement that .bss be initialized by
the bootloader prior to calling the handover entry.
When systemd-boot is used to boot a unified kernel image [1], the image
is constructed by embedding the bzImage as a .linux section in a PE
executable that contains a small stub loader from systemd together with
additional sections and potentially an initrd. As the .bss section
within the bzImage is no longer explicitly present as part of the file,
it is not initialized before calling the EFI handover entry.
Furthermore, as the size of the embedded .linux section is only the size
of the bzImage file itself, the .bss section's memory may not even have
been allocated.
In particular, this can result in efi_disable_pci_dma being true even
when it was not specified via the command line or configuration option,
which in turn causes crashes while booting on some systems.
To avoid issues, place all EFI stub global variables into the .data
section instead of .bss. As of this writing, only boolean flags for a
few command line arguments and the sys_table pointer were in .bss and
will now move into the .data section.
[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images
Fixes: 3ee372ccce4d ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
Reported-by: Sergey Shatunov <[email protected]>
Signed-off-by: Arvind Sankar <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
The pointer hdr is being assigned a value that is never read and
it is being updated later with a new value. The assignment is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Resolve these conflicts:
arch/x86/Kconfig
arch/x86/kernel/Makefile
Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered since the previous update.
ALSA core:
- Regression fix for OSS PCM emulation
ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
Others:
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped from
anyone's hands"
* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Add driver blacklist
ALSA: usb-audio: Add mixer workaround for TRX40 and co
ALSA: hda/realtek - Add quirk for MSI GL63
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: hda: Fix potential access overflow in beep helper
ASoC: cs4270: pull reset GPIO low then high
ALSA: hda/realtek - Add HP new mute led supported for ALC236
ALSA: hda/realtek - Add supported new mute Led for HP
ASoC: rt5645: Add platform-data for Medion E1239T
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
ASoC: stm32: sai: Add missing cleanup
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
ASoC: Intel: atom: Fix uninitialized variable compiler warning
ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
ASoC: SOF: Turn "firmware boot complete" message into a dbg message
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
ALSA: pcm: oss: Fix regression by buffer overflow fix
edd: Use scnprintf() for avoiding potential buffer overflow
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Ensure that the compiler and linker versions are aligned so that ld
doesn't complain about not understanding a .note.gnu.property section
(emitted when pointer authentication is enabled).
- Force -mbranch-protection=none when the feature is not enabled, in
case a compiler may choose a different default value.
- Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and
rarely enabled.
- Fix checking 16-bit Thumb-2 instructions checking mask in the
emulation of the SETEND instruction (it could match the bottom half
of a 32-bit Thumb-2 instruction).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
arm64: remove CONFIG_DEBUG_ALIGN_RODATA feature
arm64: Always force a branch protection mode when the compiler has one
arm64: Kconfig: ptrauth: Add binutils version check to fix mismatch
init/kconfig: Add LD_VERSION Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix out-of-sync IVs in self-test for IPsec AEAD algorithms
Algorithms:
- Use formally verified implementation of x86/curve25519
Drivers:
- Enhance hwrng support in caam
- Use crypto_engine for skcipher/aead/rsa/hash in caam
- Add Xilinx AES driver
- Add uacce driver
- Register zip engine to uacce in hisilicon
- Add support for OCTEON TX CPT engine in marvell"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
crypto: af_alg - bool type cosmetics
crypto: arm[64]/poly1305 - add artifact to .gitignore files
crypto: caam - limit single JD RNG output to maximum of 16 bytes
crypto: caam - enable prediction resistance in HRWNG
bus: fsl-mc: add api to retrieve mc version
crypto: caam - invalidate entropy register during RNG initialization
crypto: caam - check if RNG job failed
crypto: caam - simplify RNG implementation
crypto: caam - drop global context pointer and init_done
crypto: caam - use struct hwrng's .init for initialization
crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
crypto: ccree - remove duplicated include from cc_aead.c
crypto: chelsio - remove set but not used variable 'adap'
crypto: marvell - enable OcteonTX cpt options for build
crypto: marvell - add the Virtual Function driver for CPT
crypto: marvell - add support for OCTEON TX CPT engine
crypto: marvell - create common Kconfig and Makefile for Marvell
crypto: arm/neon - memzero_explicit aes-cbc key
crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
crypto: atmel-i2c - Fix wakeup fail
...
|
|
When CONFIG_DEBUG_ALIGN_RODATA is enabled, kernel segments mapped with
different permissions (r-x for .text, r-- for .rodata, rw- for .data,
etc) are rounded up to 2 MiB so they can be mapped more efficiently.
In particular, it permits the segments to be mapped using level 2
block entries when using 4k pages, which is expected to result in less
TLB pressure.
However, the mappings for the bulk of the kernel will use level 2
entries anyway, and the misaligned fringes are organized such that they
can take advantage of the contiguous bit, and use far fewer level 3
entries than would be needed otherwise.
This makes the value of this feature dubious at best, and since it is not
enabled in defconfig or in the distro configs, it does not appear to be
in wide use either. So let's just remove it.
Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Acked-by: Will Deacon <[email protected]>
Acked-by: Laura Abbott <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for host software queue for (e)MMC/SD
- Throttle polling rate for CMD6
- Update CMD13 busy condition check for CMD6 commands
- Improve busy detect polling for erase/trim/discard/HPI
- Fixup support for HW busy detection for HPI commands
- Re-work and improve support for eMMC sanitize commands
MMC host:
- mmci:
* Add support for sdmmc variant revision 2.0
- mmci_sdmmc:
* Improve support for busyend detection
* Fixup support for signal voltage switch
* Add support for tuning with delay block
- mtk-sd:
* Fix another SDIO irq issue
- sdhci:
* Disable native card detect when GPIO based type exist
- sdhci:
* Add option to defer request completion
- sdhci_am654:
* Add support to set a tap value per speed mode
- sdhci-esdhc-imx:
* Add support for i.MX8MM based variant
* Fixup support for standard tuning on i.MX8 usdhc
* Optimize for strobe/clock dll settings
* Fixup support for system and runtime suspend/resume
- sdhci-iproc:
* Update regulator/bus-voltage management for bcm2711
- sdhci-msm:
* Prevent clock gating with PWRSAVE_DLL on broken variants
* Fix management of CQE during SDHCI reset
- sdhci-of-arasan:
* Add support for auto tuning on ZynqMP based platforms
- sdhci-omap:
* Add support for system suspend/resume
- sdhci-sprd:
* Add support for HW busy detection
* Enable support host software queue
- sdhci-tegra:
* Add support for HW busy detection
- tmio/renesas_sdhi:
* Enforce retune after runtime suspend
- renesas_sdhi:
* Use manual tap correction for HS400 on some variants
* Add support for manual correction of tap values for tunings"
* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
mmc: cavium-octeon: remove nonsense variable coercion
mmc: mediatek: fix SDIO irq issue
mmc: mmci_sdmmc: Fix clear busyd0end irq flag
dt-bindings: mmc: Fix node name in an example
mmc: core: Re-work the code for eMMC sanitize
mmc: sdhci: use FIELD_GET for preset value bit masks
mmc: sdhci-of-at91: Display clock changes for debug purpose only
mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
sdhci: tegra: Implement Tegra specific set_timeout callback
mmc: sdhci-omap: Add Support for Suspend/Resume
mmc: renesas_sdhi: simplify execute_tuning
mmc: renesas_sdhi: Use BITS_PER_LONG helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"Misc cleanups and small enhancements all around the map"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Fix debug_puthex() parameter type
x86/setup: Fix static memory detection
x86/vmlinux: Drop unneeded linker script discard of .eh_frame
x86/*/Makefile: Use -fno-asynchronous-unwind-tables to suppress .eh_frame sections
x86/boot/compressed: Remove .eh_frame section from bzImage
x86/boot/compressed/64: Remove .bss/.pgtable from bzImage
x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len
x86/boot/compressed/64: Use LEA to initialize boot stack pointer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- loongson64 irq rework
- dmi support loongson
- replace setup_irq() by request_irq()
- jazz cleanups
- minor cleanups and fixes
* tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits)
MIPS: ralink: mt7621: Fix soc_device introduction
MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n
MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3
MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC
MAINTAINERS: Update Loongson64 entry
MIPS: Loongson64: Load built-in dtbs
MIPS: Loongson64: Add generic dts
dt-bindings: mips: Add loongson boards
MIPS: Loongson64: Drop legacy IRQ code
dt-bindings: interrupt-controller: Add Loongson-3 HTPIC
irqchip: Add driver for Loongson-3 HyperTransport PIC controller
dt-bindings: interrupt-controller: Add Loongson LIOINTC
irqchip: loongson-liointc: Workaround LPC IRQ Errata
irqchip: Add driver for Loongson I/O Local Interrupt Controller
docs: mips: remove no longer needed au1xxx_ide.rst documentation
MIPS: Alchemy: remove no longer used au1xxx_ide.h header
ide: remove no longer used au1xxx-ide driver
MIPS: Add support for Desktop Management Interface (DMI)
firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START
MIPS: ralink: mt7621: introduce 'soc_device' initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core SMP updates from Thomas Gleixner:
"CPU (hotplug) updates:
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low
level functions cpu_up/down() are now confined to the core code and
not longer accessible from random code"
* tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus()
cpu/hotplug: Hide cpu_up/down()
cpu/hotplug: Move bringup of secondary CPUs out of smp_init()
torture: Replace cpu_up/down() with add/remove_cpu()
firmware: psci: Replace cpu_up/down() with add/remove_cpu()
xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()
parisc: Replace cpu_up/down() with add/remove_cpu()
sparc: Replace cpu_up/down() with add/remove_cpu()
powerpc: Replace cpu_up/down() with add/remove_cpu()
x86/smp: Replace cpu_up/down() with add/remove_cpu()
arm64: hibernate: Use bringup_hibernate_cpu()
cpu/hotplug: Provide bringup_hibernate_cpu()
arm64: Use reboot_cpu instead of hardconding it to 0
arm64: Don't use disable_nonboot_cpus()
ARM: Use reboot_cpu instead of hardcoding it to 0
ARM: Don't use disable_nonboot_cpus()
ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus()
cpu/hotplug: Create a new function to shutdown nonboot cpus
cpu/hotplug: Add new {add,remove}_cpu() functions
sched/core: Remove rq.hrtick_csd_pending
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core changes for 5.7-rc1.
Nothing huge in here, just lots of little firmware core changes and
use of new apis, a libfs fix, a debugfs api change, and some driver
core deferred probe rework.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
Revert "driver core: Set fw_devlink to "permissive" behavior by default"
driver core: Set fw_devlink to "permissive" behavior by default
driver core: Replace open-coded list_last_entry()
driver core: Read atomic counter once in driver_probe_done()
libfs: fix infoleak in simple_attr_read()
driver core: Add device links from fwnode only for the primary device
platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
Input: silead - Switch to firmware_request_platform for retreiving the fw
selftests: firmware: Add firmware_request_platform tests
test_firmware: add support for firmware_request_platform
firmware: Add new platform fallback mechanism and firmware_request_platform()
Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
drivers: base: power: wakeup.c: Use built-in RCU list checking
component: allow missing unbind callback
debugfs: remove return value of debugfs_create_file_size()
debugfs: Check module state before warning in {full/open}_proxy_open()
firmware: fix a double abort case with fw_load_sysfs_fallback
arch_topology: Fix putting invalid cpu clk
...
|
|
Linux 5.6
|
|
Commit:
ec93fc371f014a6f ("efi/libstub: Add support for loading the initrd from a device path")
added a diagnostic print to the ARM version of the EFI stub that
reports whether an initrd has been loaded that was passed
via the command line using initrd=.
However, it failed to take into account that, for historical reasons,
the file loading routines return EFI_SUCCESS when no file was found,
and the only way to decide whether a file was loaded is to inspect
the 'size' argument that is passed by reference. So let's inspect
this returned size, to prevent the print from being emitted even if
no initrd was loaded at all.
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
|
|
Commit:
9f9223778ef3 ("efi/libstub/arm: Make efi_entry() an ordinary PE/COFF entrypoint")
did some code refactoring to get rid of the EFI entry point assembler
code, and in the process, it got rid of the assignment of image_addr
to the value of _text. Instead, it switched to using the image_base
field of the efi_loaded_image struct provided by UEFI, which should
contain the same value.
However, Michael reports that this is not the case: older GRUB builds
corrupt this value in some way, and since we can easily switch back to
referring to _text to discover this value, let's simply do that.
While at it, fix another issue in commit 9f9223778ef3, which may result
in the unassigned image_addr to be misidentified as the preferred load
offset of the kernel, which is unlikely but will cause a boot crash if
it does occur.
Finally, let's add a warning if the _text vs. image_base discrepancy is
detected, so we can tell more easily how widespread this issue actually
is.
Reported-by: Michael Kelley <[email protected]>
Tested-by: Michael Kelley <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI/SCPI updates for v5.7
1. Abstraction of the scmi transport type from the core protocol driver
which enables addition of other transports like SMC/HVC, SPCI and
virtio apart from the existing mailbox
2. Miscellaneous fix for minor formatting issues with the kernel-doc
style comments
3. Replacement of zero-length array with flexible-array member which is
part of tree-wide cleanup
* tag 'scmi-updates-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
misc: vexpress: Replace zero-length array with flexible-array member
firmware: arm_scpi: Replace zero-length array with flexible-array member
firmware: arm_scmi/perf: Replace zero-length array with flexible-array member
firmware: arm_scmi: Replace zero-length array with flexible-array member
firmware: arm_scmi: Make scmi core independent of the transport type
firmware: arm_scmi: Move macros and helpers to common.h
firmware: arm_scmi: Update doc style comments
Link: https://lore.kernel.org/r/20200304175247.GA5402@bogus
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.7-rc1
A trivial typofix for the Kconfig entry of the Tegra IVC library.
* tag 'tegra-for-5.7-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Fix a typo in Kconfig
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.7:
- Update SCU power domain driver to include PD ranges for audio, CM40
I2C and INTMUX, also enlarge PD range for mu_b.
- Remove IMX_SC_RPC_SVC_ABORT from SCU API, as it was added by mistake.
- Increase build test coverage for i.MX8M SoC and IMX_SCU driver.
- Improve i.MX GPC power up sequencing to ensure that the reset is
properly propagated through the peripheral devices in the power
domain.
* tag 'imx-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
firmware: imx: scu-pd: add power domain for I2C and INTMUX in CM40 SS
firmware: imx: Remove IMX_SC_RPC_SVC_ABORT
firmware: imx: scu-pd: enlarge PD range for mu_b
firmware: imx: scu-pd: Add missing audio PD ranges
soc: imx: gpcv2: include linux/sizes.h
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|