| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This function checks the header for sanity, registers a bus, and
populates devices for each coreboot table entry. Let's just populate
devices here and pull the other bits up into the caller so that this
function can be repurposed for pure device creation and registration.
Cc: Wei-Ning Huang <[email protected]>
Cc: Julius Werner <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Samuel Holland <[email protected]>
Suggested-by: Julius Werner <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This is all system memory, so we shouldn't be mapping this all with
ioremap() as these aren't I/O regions. Instead, they're memory regions
so we should use memremap(). Pick MEMREMAP_WB so we can map memory from
RAM directly if that's possible, otherwise it falls back to
ioremap_cache() like is being done here already. This also nicely
silences the sparse warnings in this code and reduces the need to copy
anything around anymore.
Cc: Wei-Ning Huang <[email protected]>
Cc: Julius Werner <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Samuel Holland <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The DT based and ACPI based platform drivers here do the same thing; map
some memory and hand it over to the coreboot bus to populate devices.
The only major difference is that the DT based driver doesn't map the
coreboot table header to figure out how large of a region to map for the
whole coreboot table and it uses of_iomap() instead of ioremap_cache().
A cached or non-cached mapping shouldn't matter here and mapping some
smaller region first before mapping the whole table is just more work
but should be OK. In the end, we can remove two files and combine the
code all in one place making it easier to reason about things.
We leave the old Kconfigs in place for a little while longer but make
them hidden and select the previously hidden config option. This way
users can upgrade without having to know to reselect this config in the
future. Later on we can remove the old hidden configs.
Cc: Wei-Ning Huang <[email protected]>
Cc: Julius Werner <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Samuel Holland <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The bus is registered in module_init() but is unregistered when the
platform driver remove() function calls coreboot_table_exit(). That
isn't symmetric and it causes the bus to appear on systems that compile
this code in, even when there isn't any coreboot firmware on the device.
Let's move the registration to the coreboot_table_init() function so
that it matches the exit path.
Cc: Wei-Ning Huang <[email protected]>
Cc: Julius Werner <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Samuel Holland <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Both callers of coreboot_table_init() ioremap the pointer that comes in
but they don't unmap the memory on failure. Both of them also fail probe
immediately with the return value of coreboot_table_init(), leaking a
mapping when it fails. The mapping isn't necessary at all after devices
are populated either, so we can just drop the mapping here when we exit
the function. Let's do that to simplify the code a bit and plug the leak.
Cc: Wei-Ning Huang <[email protected]>
Cc: Julius Werner <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Samuel Holland <[email protected]>
Fixes: 570d30c2823f ("firmware: coreboot: Expose the coreboot table as a bus")
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that the /firmware/coreboot node in DT is populated by the core DT
platform code with commit 3aa0582fdb82 ("of: platform: populate
/firmware/ node from of_platform_default_populate_init()") we should and
can remove the platform device creation here. Otherwise, the
of_platform_device_create() call will fail, the coreboot of driver won't
be registered, and this driver will never bind. At the same time, we
should move this driver to use MODULE_DEVICE_TABLE so that module
auto-load works properly when the coreboot device is auto-populated and
we should drop the of_node handling that was presumably placed here to
hold a reference to the DT node created during module init that no
longer happens.
Cc: Wei-Ning Huang <[email protected]>
Cc: Julius Werner <[email protected]>
Reviewed-by: Brian Norris <[email protected]>
Cc: Samuel Holland <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Fixes: 3aa0582fdb82 ("of: platform: populate /firmware/ node from of_platform_default_populate_init()")
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The structure gsmi_dev is local to the source and does not need to be
in global scope, so make it static.
Cleans up sparse warning:
symbol 'gsmi_dev' was not declared. Should it be static?
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
static struct ro_vpd and rw_vpd are initialized by vpd_sections_init()
in vpd_probe() based on header's ro and rw sizes.
In vpd_remove() vpd_section_destroy() performs deinitialization based
on enabled flag, which is set to true by vpd_sections_init().
This leads to call of vpd_section_destroy() on already destroyed section
for probe-release-probe-release sequence if first probe performs
ro_vpd initialization and second probe does not initialize it.
The patch adds changing enabled flag on vpd_section_destroy and adds
cleanup on the error path of vpd_sections_init.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Register a simplefb framebuffer when the coreboot table contains a
framebuffer entry.
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that all users of the coreboot_table_find function have been updated
to hang off the coreboot table bus instead, remove it.
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove the ad-hoc coreboot table search. Now the driver will only be
probed when the necessary coreboot table entry has already been found.
Furthermore, since the coreboot bus takes care of creating the device, a
separate platform device is no longer needed.
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove the ad-hoc coreboot table search. Now the driver will only be
probed when the necessary coreboot table entry has already been found.
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This simplifies creating device drivers for hardware or information
described in the coreboot table. It also avoids needing to search
through the table every time a driver is loaded.
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The driver exit function needs to unregister both platform device and
driver. Also, during registration, register driver first and perform
error checks.
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Guenter Roeck <[email protected]>
Cc: stable <[email protected]>
Tested-by: Randy Dunlap <[email protected]>
Reviewed-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It doesn't make sense to have /sys/firmware/vpd if the device is not
instantiated, so tie its lifetime to the device.
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Guenter Roeck <[email protected]>
Cc: stable <[email protected]>
Reviewed-by: Dmitry Torokhov <[email protected]>
Tested-by: Randy Dunlap <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
vpd sections are initialized during probe and thus should be destroyed
in the remove function.
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Cc: stable <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Reviewed-by: Dmitry Torokhov <[email protected]>
Tested-by: Randy Dunlap <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>
|
|
In functions vpd_sections_init() and vpd_section_init(), iounmap() is
used to unmap memory. However, in these cases, memunmap() should be
used.
Signed-off-by: Pan Bian <[email protected]>
Reviewed-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We want the char/misc driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit 7975bd4cca05a99aa14964cfa22366ee64da50ad, because
VPD relies on driver core to handle deferrals returned by
coreboot_table_find().
Signed-off-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There is no reason why VPD should register platform device and driver,
given that we do not use their respective kobjects to attach attributes,
nor do we need suspend/resume hooks, or any other features of device
core.
Signed-off-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
ro_vpd and rw_vpd are static module-scope variables that are guaranteed
to be initialized with zeroes, there is no need for explicit memset().
Signed-off-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When creating name for the "raw" attribute, let's switch to using
kaspeintf() instead of doing it by hand. Also make sure we handle
errors.
Signed-off-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Instead of open-coding kstrndup with kzalloc + memcpy, let's use
the helper.
Signed-off-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
kobject_del() only unlinks kobject, we need to use kobject_put() to
make sure kobject will go away completely.
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We should not free info->key before we remove sysfs attribute that uses
this data as its name.
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We should only add section attribute to the list of section attributes
if we successfully created corresponding sysfs attribute.
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The recent coreboot memory console update (firmware: google: memconsole:
Adapt to new coreboot ring buffer format) introduced a small security
issue in the driver: The new driver implementation parses the memory
console structure again on every access. This is intentional so that
additional lines added concurrently by runtime firmware can be read out.
However, if an attacker can write to the structure, they could increase
the size value to a point where the driver would read potentially
sensitive memory areas from outside the original console buffer during
the next access. This can be done through /dev/mem, since the console
buffer usually resides in firmware-reserved memory that is not covered
by STRICT_DEVMEM.
This patch resolves that problem by reading the buffer's size value only
once during boot (where we can still trust the structure). Other parts
of the structure can still be modified at runtime, but the driver's
bounds checks make sure that it will never read outside the buffer.
Fixes: a5061d028 ("firmware: google: memconsole: Adapt to new coreboot ring buffer format")
Signed-off-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We want the fixes in here as well to handle merge issues.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch fixes several issues:
- if the 1st 'kzalloc' fails, we dereference a NULL pointer
- if the 2nd 'kzalloc' fails, there is a memory leak
- if 'sysfs_create_bin_file' fails there is also a memory leak
Fix it by adding a test after the first memory allocation and some error
handling paths to correctly free memory if needed.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The upstream coreboot implementation of memconsole was enhanced from a
single-boot console to a persistent ring buffer
(https://review.coreboot.org/#/c/18301). This patch changes the kernel
memconsole driver to be able to read the new format in all cases.
Signed-off-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch redesigns the interface between the generic memconsole driver
and its implementations to become more flexible than a flat memory
buffer with unchanging bounds. This allows memconsoles like coreboot's
to include lines that were added by runtime firmware after the driver
was initialized. Since the console log size is thus no longer static,
this means that the /sys/firmware/log file has to become unseekable.
Signed-off-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of new char/misc driver drivers and features for
4.12-rc1.
There's lots of new drivers added this time around, new firmware
drivers from Google, more auxdisplay drivers, extcon drivers, fpga
drivers, and a bunch of other driver updates. Nothing major, except if
you happen to have the hardware for these drivers, and then you will
be happy :)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
firmware: google memconsole: Fix return value check in platform_memconsole_init()
firmware: Google VPD: Fix return value check in vpd_platform_init()
goldfish_pipe: fix build warning about using too much stack.
goldfish_pipe: An implementation of more parallel pipe
fpga fr br: update supported version numbers
fpga: region: release FPGA region reference in error path
fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
mei: drop the TODO from samples
firmware: Google VPD sysfs driver
firmware: Google VPD: import lib_vpd source files
misc: lkdtm: Add volatile to intentional NULL pointer reference
eeprom: idt_89hpesx: Add OF device ID table
misc: ds1682: Add OF device ID table
misc: tsl2550: Add OF device ID table
w1: Remove unneeded use of assert() and remove w1_log.h
w1: Use kernel common min() implementation
uio_mf624: Align memory regions to page size and set correct offsets
uio_mf624: Refactor memory info initialization
uio: Allow handling of non page-aligned memory regions
hangcheck-timer: Fix typo in comment
...
|
|
platform_memconsole_init()
In case of error, the function platform_device_register_simple() returns
ERR_PTR() and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().
Fixes: d384d6f43d1e ("firmware: google memconsole: Add coreboot support")
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In case of error, the function platform_device_register_simple()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
Fixes: 049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch introduces the Google Vital Product Data driver.
This driver reads Vital Product Data from coreboot tables and then
creates the corresponding sysfs entries under /sys/firmware/vpd to
provide easy access for userspace programs (does not require flashrom).
The sysfs is structured as follow:
/sys/firmware/vpd
|-- ro
| |-- key1
| `-- key2
|-- ro_raw
|-- rw
| `-- key1
`-- rw_raw
Where ro_raw and rw_raw contain the raw VPD partition. The files under
ro and rw correspond to the key name in the VPD and the the file content
is the value for the key.
Signed-off-by: Wei-Ning Huang <[email protected]>
Signed-off-by: Thierry Escande <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch imports lib_vpd.h and vpd_decode.c from the Chromium Vital
Product Data project.
This library is used to parse VPD sections obtained from coreboot table
entries describing Chromebook devices product data. Only the sections of
type VPD_TYPE_STRING are decoded.
The VPD string sections in the coreboot tables contain the type (1 byte
set to 0x01 for strings), the key length, the key ascii array, the value
length, and the value ascii array. The key and value arrays are not null
terminated.
Signed-off-by: Wei-Ning Huang <[email protected]>
Signed-off-by: Thierry Escande <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch expands the Google firmware memory console driver to also
work on certain tree based platforms running coreboot, such as ARM/ARM64
Chromebooks. This patch now adds another path to find the coreboot table
through the device tree. In order to find that, a second level
bootloader must have installed the 'coreboot' compatible device tree
node that describes its base address and size.
This patch is a rework/split/merge of patches from the chromeos v4.4
kernel tree originally authored by:
Wei-Ning Huang <[email protected]>
Julius Werner <[email protected]>
Brian Norris <[email protected]>
Signed-off-by: Thierry Escande <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Coreboot (http://www.coreboot.org) allows to save the firmware console
output in a memory buffer. With this patch, the address of this memory
buffer is obtained from coreboot tables on x86 chromebook devices
declaring an ACPI device with name matching GOOGCB00 or BOOT0000.
If the memconsole-coreboot driver is able to find the coreboot table,
the memconsole driver sets the cbmem_console address and initializes the
memconsole sysfs entries.
The coreboot_table-acpi driver is responsible for setting the address of
the coreboot table header when probed. If this address is not yet set
when memconsole-coreboot is probed, then the probe is deferred by
returning -EPROBE_DEFER.
This patch is a rework/split/merge of patches from the chromeos v4.4
kernel tree originally authored by:
Vadim Bendebury <[email protected]>
Wei-Ning Huang <[email protected]>
Yuji Sasaki <[email protected]>
Duncan Laurie <[email protected]>
Julius Werner <[email protected]>
Brian Norris <[email protected]>
Signed-off-by: Thierry Escande <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch splits memconsole.c in 2 parts. One containing the
architecture-independent part and the other one containing the EBDA
specific part. This prepares the integration of coreboot support for the
memconsole.
The memconsole driver is now named as memconsole-x86-legacy.
Signed-off-by: Thierry Escande <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch removes the "Google Firmware Drivers" menu containing a
menuconfig entry with the exact same name. The menuconfig is now
directly under the "Firmware Drivers" entry.
Signed-off-by: Thierry Escande <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
"dma_pool_destroy"
The dma_pool_destroy() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Mike Waychison <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Signed-off-by: Matt Fleming <[email protected]>
|
|
The google memconsole driver is currently broken upstream, as it tries
to read memory that is described as reserved in /proc/iomem, by
dereferencing a pointer obtained through phys_to_virt(). This triggers
a kernel fault as such regions are unmapped after early boot.
The proper workaround is to use ioremap_cache() / iounmap() around such
accesses.
As some unrelated changes, I also converted some printks to use pr_info()
and added some missing __init annotations.
Tested: booted dbg build, verified I could read /sys/firmware/log
Signed-off-by: Michel Lespinasse <[email protected]>
Acked-by: Mike Waychison <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Starting in commit e14ab23dde12b80db4c94b684a2e485b72b16af3,
efivars_sysfs_init() is called both by itself as an init function,
and by drivers/firmware/google/gsmi.c gsmi_init().
This results in runtime warnings such as the following:
[ 5.651330] WARNING: at fs/sysfs/dir.c:530 sysfs_add_one+0xbd/0xe0()
[ 5.657699] sysfs: cannot create duplicate filename '/firmware/gsmi/vars'
Fixing this by removing the redundant efivars_sysfs_init() call in
gsmi_init().
Tested: booted, checked that /firmware/gsmi/vars was still present and
showed the expected contents.
Signed-off-by: Michel Lespinasse <[email protected]>
Acked-by: Matt Fleming <[email protected]>
Acked-by: Mike Waychison <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The GOOGLE_SMI Kconfig symbol depends on DMI and selects EFI. This
causes problems on other archs when introducing DMI support that depends
on EFI, as it results in a recursive dependency:
arch/arm/Kconfig:1845:error: recursive dependency detected!
arch/arm/Kconfig:1845: symbol DMI depends on EFI
Fix by changing the 'select EFI' to a 'depends on EFI'.
Signed-off-by: Ard Biesheuvel <[email protected]>
Cc: David Rientjes <[email protected]>
Acked-by: Mike Waychison <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This driver doesn't need to directly access DMA masks if it uses the
platform_device_register_full() API rather than
platform_device_register_simple() - the former function can initialize
the DMA mask appropriately.
Signed-off-by: Russell King <[email protected]>
|
|
The use of strict_strtoul() is not preferred, because strict_strtoul() is
obsolete. Thus, kstrtoul() should be used.
Signed-off-by: Jingoo Han <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Tom Gundersen <[email protected]>
Cc: Mike Waychison <[email protected]>
Acked-by: Mike Waychison <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Resolve conflicts for Ingo.
Conflicts:
drivers/firmware/Kconfig
drivers/firmware/efivars.c
Signed-off-by: Matt Fleming <[email protected]>
|
|
There isn't really a formal interface for dealing with EFI variables
or struct efivar_entry. Historically, this has led to various bits of
code directly accessing the generic EFI variable ops, which inherently
ties it to specific EFI variable operations instead of indirectly
using whatever ops were registered with register_efivars(). This lead
to the efivarfs code only working with the generic EFI variable ops
and not CONFIG_GOOGLE_SMI.
Encapsulate everything that needs to access '__efivars' inside an
efivar_entry_* API and use the new API in the pstore, sysfs and
efivarfs code.
Much of the efivars code had to be rewritten to use this new API. For
instance, it is now up to the users of the API to build the initial
list of EFI variables in their efivar_init() callback function. The
variable list needs to be passed to efivar_init() which allows us to
keep work arounds for things like implementation bugs in
GetNextVariable() in a central location.
Allowing users of the API to use a callback function to build the list
greatly benefits the efivarfs code which needs to allocate inodes and
dentries for every variable. It previously did this in a racy way
because the code ran without holding the variable spinlock. Both the
sysfs and efivarfs code maintain their own lists which means the two
interfaces can be running simultaneously without interference, though
it should be noted that because no synchronisation is performed it is
very easy to create inconsistencies. efibootmgr doesn't currently use
efivarfs and users are likely to also require the old sysfs interface,
so it makes sense to allow both to be built.
Reviewed-by: Tom Gundersen <[email protected]>
Tested-by: Tom Gundersen <[email protected]>
Cc: Seiji Aguchi <[email protected]>
Cc: Matthew Garrett <[email protected]>
Cc: Jeremy Kerr <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Mike Waychison <[email protected]>
Signed-off-by: Matt Fleming <[email protected]>
|