Age | Commit message (Collapse) | Author | Files | Lines |
|
Some Makefiles already pass -ffreestanding unconditionally.
For example, arch/arm64/lib/Makefile, arch/x86/purgatory/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -ffreestanding.
I confirmed GCC 4.8 and Clang manuals document this option.
Get rid of cc-option from -ffreestanding.
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
|
|
Some Makefiles already pass -fno-stack-protector unconditionally.
For example, arch/arm64/kernel/vdso/Makefile, arch/x86/xen/Makefile.
No problem report so far about hard-coding this option. So, we can
assume all supported compilers know -fno-stack-protector.
GCC 4.8 and Clang support this option (https://godbolt.org/z/_HDGzN)
Get rid of cc-option from -fno-stack-protector.
Remove CONFIG_CC_HAS_STACKPROTECTOR_NONE, which is always 'y'.
Note:
arch/mips/vdso/Makefile adds -fno-stack-protector twice, first
unconditionally, and second conditionally. I removed the second one.
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
|
|
When copying the setup_header into the boot_params buffer, only the data
that is actually part of the setup_header should be copied.
efi_pe_entry() currently copies the entire second sector, which
initializes some of the fields in boot_params beyond the setup_header
with garbage (i.e. part of the real-mode boot code gets copied into
those fields).
This does not cause any issues currently because the fields that are
overwritten are padding, BIOS EDD information that won't get used, and
the E820 table which will get properly filled in later.
Fix this to only copy data that is actually part of the setup_header
structure.
Signed-off-by: Arvind Sankar <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Commit
987053a30016 ("efi/x86: Move command-line initrd loading to efi_main")
made the ramdisk_addr/ramdisk_size variables in efi_pe_entry unused, but
neglected to delete them.
Delete these unused variables.
Signed-off-by: Arvind Sankar <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off
(or both), even though the EFI spec does not actually support this.
While booting at HYP mode is something we might tolerate, fiddling
with the caches is a more serious issue, as disabling the caches is
tricky to do safely from C code, and running without the Dcache makes
it impossible to support unaligned memory accesses, which is another
explicit requirement imposed by the EFI spec.
So take note of the CPU mode and MMU state in the EFI stub diagnostic
output so that we can easily diagnose any issues that may arise from
this. E.g.,
EFI stub: Entering in SVC mode with MMU enabled
Also, capture the CPSR and SCTLR system register values at EFI stub
entry, and after ExitBootServices() returns, and check whether the
MMU and Dcache were disabled at any point. If this is the case, a
diagnostic message like the following will be emitted:
efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware!
efi: CPSR at EFI stub entry : 0x600001d3
efi: SCTLR at EFI stub entry : 0x00c51838
efi: CPSR after ExitBootServices() : 0x600001d3
efi: SCTLR after ExitBootServices(): 0x00c50838
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Leif Lindholm <[email protected]>
|
|
On arm64, the EFI stub is built into the kernel proper, and so the stub
can refer to its symbols directly. Therefore, the practice of using EFI
configuration tables to pass information between them is never needed,
so we can omit any code consuming such tables when building for arm64.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Leif Lindholm <[email protected]>
|
|
In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and
CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables
are tied to specific Kconfig options. Currently this is not the case
for modifying the ACPI SSDT via the efivar_ssdt kernel command line
option and associated EFI variable.
This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults
disabled, in order to allow enabling or disabling that feature during
the build.
Cc: <[email protected]>
Signed-off-by: Peter Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Provide missing descriptions for EFI stub helper functions.
Adjust formatting of existing descriptions to kernel style.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Commit 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine") introduced a
regression that made a couple of (badly configured) systems fail to
boot [1]: Until 5.6, we silently accepted Unix-style file separators in
EFI paths, which might violate the EFI standard, but are an easy to make
mistake. This fix restores the pre-5.7 behaviour.
[1] https://bbs.archlinux.org/viewtopic.php?id=256273
Fixes: 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine")
Signed-off-by: Philipp Fent <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ardb: rewrite as chained if/else statements]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Include <linux/string.h> into skip_spaces.c to silence a compiler
warning about a missing prototype.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
Lastly, make use of the sizeof_field() helper instead of an open-coded
version.
This issue was found with the help of Coccinelle and audited _manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/20200527171425.GA4053@embeddedor
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.
Fixes: 0bb549052d33 ("efi: Add esrt support")
Signed-off-by: Qiushi Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Commit
bbf8e8b0fe04 ("efi/libstub: Optimize for size instead of speed")
changed the optimization level for the EFI stub to -Os from -O2.
Andrey Ignatov reports that this breaks the build with gcc 4.8.5.
Testing on godbolt.org, the combination of -Os,
-fno-asynchronous-unwind-tables, and ms_abi functions doesn't work,
failing with the error:
sorry, unimplemented: ms_abi attribute requires
-maccumulate-outgoing-args or subtarget optimization implying it
This does appear to work with gcc 4.9 onwards.
Add -maccumulate-outgoing-args explicitly to unbreak the build with
pre-4.9 versions of gcc.
Reported-by: Andrey Ignatov <[email protected]>
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Define a new initializer for the mmap locking api. Initially this just
evaluates to __RWSEM_INITIALIZER as the API is defined as wrappers around
rwsem.
Signed-off-by: Michel Lespinasse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Laurent Dufour <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Liam Howlett <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ying Han <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess/access_ok updates from Al Viro:
"Removals of trivially pointless access_ok() calls.
Note: the fiemap stuff was removed from the series, since they are
duplicates with part of ext4 series carried in Ted's tree"
* 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vmci_host: get rid of pointless access_ok()
hfi1: get rid of pointless access_ok()
usb: get rid of pointless access_ok() calls
lpfc_debugfs: get rid of pointless access_ok()
efi_test: get rid of pointless access_ok()
drm_read(): get rid of pointless access_ok()
via-pmu: don't bother with access_ok()
drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()
omapfb: get rid of pointless access_ok() calls
amifb: get rid of pointless access_ok() calls
drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()
drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()
cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()
nvram: drop useless access_ok()
n_hdlc_tty_read(): remove pointless access_ok()
tomoyo_write_control(): get rid of pointless access_ok()
btrfs_ioctl_send(): don't bother with access_ok()
fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade...
dlmfs_file_write(): get rid of pointless access_ok()
|
|
Pull ARM updates from Russell King:
- remove a now unnecessary usage of the KERNEL_DS for
sys_oabi_epoll_ctl()
- update my email address in a number of drivers
- decompressor EFI updates from Ard Biesheuvel
- module unwind section handling updates
- sparsemem Kconfig cleanups
- make act_mm macro respect THREAD_SIZE
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8980/1: Allow either FLATMEM or SPARSEMEM on the multiplatform build
ARM: 8979/1: Remove redundant ARCH_SPARSEMEM_DEFAULT setting
ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE
ARM: decompressor: run decompressor in place if loaded via UEFI
ARM: decompressor: move GOT into .data for EFI enabled builds
ARM: decompressor: defer loading of the contents of the LC0 structure
ARM: decompressor: split off _edata and stack base into separate object
ARM: decompressor: move headroom variable out of LC0
ARM: 8976/1: module: allow arch overrides for .init section names
ARM: 8975/1: module: fix handling of unwind init sections
ARM: 8974/1: use SPARSMEM_STATIC when SPARSEMEM is enabled
ARM: 8971/1: replace the sole use of a symbol with its definition
ARM: 8969/1: decompressor: simplify libfdt builds
Update rmk's email address in various drivers
ARM: compat: remove KERNEL_DS usage in sys_oabi_epoll_ctl()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
|
|
really, people - get_user(), copy_from_user(), memdup_user(), etc.
all fail if access_ok() does.
Signed-off-by: Al Viro <[email protected]>
|
|
Commit
987053a30016 ("efi/x86: Move command-line initrd loading to efi_main")
moved the command-line initrd loading into efi_main(), with a check
to ensure that it was attempted only if the EFI stub was booted via
efi_pe_entry rather than the EFI handover entry.
However, in the case where it was booted via handover entry, and thus an
initrd may have already been loaded by the bootloader, it then wrote 0
for the initrd address and size, removing any existing initrd.
Fix this by checking if size is positive before setting the fields in
the bootparams structure.
Fixes: 987053a30016 ("efi/x86: Move command-line initrd loading to efi_main")
Reported-by: Dan Williams <[email protected]>
Signed-off-by: Arvind Sankar <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Tested-by: Dan Williams <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
More EFI changes for v5.8:
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Some fixes for issues introduced by the first batch of v5.8 changes
- Fix a missing prototypes warning
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
Conflicts:
drivers/firmware/efi/libstub/efistub.h
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Fix a missing prototype warning by adding a forward declaration
for the PE/COFF entrypoint, and while at it, align the function
name between the x86 and ARM versions of the stub.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
"- fix EFI framebuffer earlycon for wide fonts
- avoid filling screen_info with garbage if the EFI framebuffer is not
available
- fix a potential host tool build error due to a symbol clash on x86
- work around a EFI firmware bug regarding the binary format of the TPM
final events table
- fix a missing memory free by reworking the E820 table sizing routine to
not do the allocation in the first place
- add CPER parsing for firmware errors"
|
|
The documentation provided by kobject_init_and_add() clearly spells out
the need to call kobject_put() on the kobject if an error is returned.
Add this missing call to the error path.
Cc: <[email protected]>
Reported-by: 亿一 <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Now that we removed the memory limit for the allocation of the
command line, there is no longer a need to use the page based
allocator so switch to a pool allocation instead.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Check if the command line passed in is larger than COMMAND_LINE_SIZE,
and truncate it to the last full argument if so.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Now we can use snprintf to do the UTF-16 to UTF-8 translation for the
command line.
Drop the special "zero" trick to handle an empty command line. This was
unnecessary even before this since with options_chars == 0,
efi_utf16_to_utf8 would not have accessed options at all. snprintf won't
access it either with a precision of 0.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
efi_convert_cmdline currently overestimates the length of the equivalent
UTF-8 encoding.
snprintf can now be used to do the conversion to UTF-8, however, it does
not have a way to specify the size of the UTF-16 string, only the size
of the resulting UTF-8 string. So in order to use it, we need to
precalculate the exact UTF-8 size.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
efi_printk can now handle the UTF-16 filename, so print it using efi_err
instead of a separate efi_char16_puts call.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
In order to be able to use the UTF-16 support added to vsprintf in the
previous commit, enhance efi_puts to decode UTF-8 into UTF-16. Invalid
UTF-8 encodings are passed through unchanged.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Support %lc and %ls to output UTF-16 strings (converted to UTF-8).
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Add video=efifb:list option to list the modes that are available.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Add the required typedefs etc for using con_in's simple text input
protocol, and for using the boottime event services.
Also add the prototype for the "stall" boot service.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Use the efi_printk function in efi_info/efi_err, and add efi_debug. This
allows formatted output at different log levels.
Add the notion of a loglevel instead of just quiet/not-quiet, and
parse the efi=debug kernel parameter in addition to quiet.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
The decompressor can load from anywhere in memory, and the only reason
the EFI stub code relocates it is to ensure it appears within the first
128 MiB of memory, so that the uncompressed kernel ends up at the right
offset in memory.
We can short circuit this, and simply jump into the decompressor startup
code at the point where it knows where the base of memory lives. This
also means there is no need to disable the MMU and caches, create new
page tables and re-enable them.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Nicolas Pitre <[email protected]>
|
|
Implement vsnprintf instead of vsprintf to avoid the possibility of a
buffer overflow.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
If we get an invalid conversion specifier, bail out instead of trying to
fix it up. The format string likely has a typo or assumed we support
something that we don't, in either case the remaining arguments won't
match up with the remaining format string.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Consolidate the actual output of the formatted text into one place.
Fix a couple of edge cases:
1. If 0 is printed with a precision of 0, the printf specification says
that nothing should be output, with one exception (2b).
2. The specification for octal alternate format (%#o) adds the leading
zero not as a prefix as the 0x for hexadecimal is, but by increasing
the precision if necessary to add the zero. This means that
a. %#.2o turns 8 into "010", but 1 into "01" rather than "001".
b. %#.o prints 0 as "0" rather than "", unlike the situation for
decimal, hexadecimal and regular octal format, which all output an
empty string.
Reduce the space allocated for printing a number to the maximum actually
required (22 bytes for a 64-bit number in octal), instead of the 66
bytes previously allocated.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Print "(null)" for 's' if the input is a NULL pointer.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Factor out the code to get the correct type of numeric argument into a
helper function.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Factor out the width/precision parsing into a helper function.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Treat 'p' as a hexadecimal integer with precision equal to the number of
digits in void *.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
A negative precision should be ignored completely, and the presence of a
valid precision should turn off the 0 flag.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Move flags parsing code out into a helper function.
The '%%' case can be handled up front: it is not allowed to have flags,
width etc.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Support 'll' qualifier for long long by copying the decimal printing
code from lib/vsprintf.c. For simplicity, the 32-bit code is used on
64-bit architectures as well.
Support 'hh' qualifier for signed/unsigned char type integers.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
|