aboutsummaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)AuthorFilesLines
2022-06-23dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct dw_edma_chipFrank Li2-8/+8
The struct dw_edma contains wr(rd)_ch_cnt fields. The EDMA driver gets write(read) channel number from register, then saves these into dw_edma. The wr(rd)_ch_cnt in dw_edma_chip actually means how many link list memory are available in ll_region_wr(rd)[EDMA_MAX_WR_CH]. Rename it to ll_wr(rd)_cnt to indicate actual usage. Link: https://lore.kernel.org/r/20220524152159.2370739-5-Frank.Li@nxp.com Tested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
2022-06-23dmaengine: dw-edma: Change rg_region to reg_base in struct dw_edma_chipFrank Li3-5/+5
struct dw_edma_region rg_region included virtual address, physical address and size information. But only the virtual address is used by EDMA driver. Change it to void __iomem *reg_base to clean up code. Link: https://lore.kernel.org/r/20220524152159.2370739-4-Frank.Li@nxp.com Tested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
2022-06-23dmaengine: dw-edma: Detach the private data and chip info structuresFrank Li7-148/+117
"struct dw_edma_chip" contains an internal structure "struct dw_edma" that is used by the eDMA core internally and should not be touched by the eDMA controller drivers themselves. But currently, the eDMA controller drivers like "dw-edma-pci" allocate and populate this internal structure before passing it on to the eDMA core. The eDMA core further populates the structure and uses it. This is wrong! Hence, move all the "struct dw_edma" specifics from controller drivers to the eDMA core. Link: https://lore.kernel.org/r/20220524152159.2370739-3-Frank.Li@nxp.com Tested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
2022-06-16dmaengine: dw-edma: Remove unused irq field in struct dw_edma_chipFrank Li1-1/+0
The "irq" field of struct dw_edma_chip was never used. Remove it. Link: https://lore.kernel.org/r/20220524152159.2370739-2-Frank.Li@nxp.com Tested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
2022-06-16dmaengine: stm32-mdma: Remove dead code in stm32_mdma_irq_handler()Alexey Khoroshilov1-5/+0
Local variable chan is initialized by an address of element of chan array that is part of stm32_mdma_device struct, so it does not make sense to compare chan with NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/1655072638-9103-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-16dmaengine: apple-admac: Use {low,upp}er_32_bits() to split 64-bit addressGeert Uytterhoeven1-4/+4
If CONFIG_PHYS_ADDR_T_64BIT is not set: drivers/dma/apple-admac.c: In function ‘admac_cyclic_write_one_desc’: drivers/dma/apple-admac.c:213:22: error: right shift count >= width of type [-Werror=shift-count-overflow] 213 | writel_relaxed(addr >> 32, ad->base + REG_DESC_WRITE(channo)); | ^~ Fix this by using the {low,upp}er_32_bits() helper macros to obtain the address parts. Reported-by: noreply@ellerman.id.au Fixes: b127315d9a78c011 ("dmaengine: apple-admac: Add Apple ADMAC driver") Acked-by: Martin Povišer <povik+lin@cutebit.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20220616141312.1953819-1-geert@linux-m68k.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-10dmaengine: dw-edma: remove a macro conditional with similar branchesVladimir Zapolskiy1-8/+0
After adding commit 8fc5133d6d4d ("dmaengine: dw-edma: Fix unaligned 64bit access") two branches under macro conditional become identical, thus the code can be simplified without any functional change. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Acked-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20220610100700.2295522-1-vladimir.zapolskiy@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULEThomas Gleixner2-8/+2
Based on the normalized pattern: this file is licensed under the term of the gnu general public license version 2 the program licensed as is without any warranty of any kind whether express or implied extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_56.RULE ↵Thomas Gleixner6-32/+6
(part 2) Based on the normalized pattern: this file is licensed under the terms of the gnu general public license version 2 this program is licensed as is without any warranty of any kind whether express or implied extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE ↵Thomas Gleixner2-21/+3
(part 2) Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10dmaengine: dw: dmamux: Fix build without CONFIG_OFMiquel Raynal1-0/+2
When built without OF support, of_match_node() expands to NULL, which produces the following output: >> drivers/dma/dw/rzn1-dmamux.c:105:34: warning: unused variable 'rzn1_dmac_match' [-Wunused-const-variable] static const struct of_device_id rzn1_dmac_match[] = { One way to silence the warning is to enclose the structure definition with an #ifdef CONFIG_OF/#endif block. Fixes: 134d9c52fca2 ("dmaengine: dw: dmamux: Introduce RZN1 DMA router support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220609141455.300879-2-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-10dmaengine: dw: dmamux: Export the module device tableMiquel Raynal1-0/+1
This is a tristate driver that can be built as a module, as a result, the OF match table should be exported with MODULE_DEVICE_TABLE(). Fixes: 134d9c52fca2 ("dmaengine: dw: dmamux: Introduce RZN1 DMA router support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220609141455.300879-1-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-10dmaengine: apple-admac: Fix print formatVinod Koul1-1/+1
We get a warning (treated as error now) drivers/dma/apple-admac.c: In function 'admac_cyclic_write_one_desc': drivers/dma/apple-admac.c:209:26: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'long unsigned int' [-Werror=format=] 209 | dev_dbg(ad->dev, "ch%d descriptor: addr=0x%pad len=0x%zx flags=0x%x\n", Use %lx for priniting the flag Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220610043117.39337-1-vkoul@kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09dmaengine: apple-admac: Add Apple ADMAC driverMartin Povišer3-0/+827
Add driver for Audio DMA Controller present on Apple SoCs from the "Apple Silicon" family. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220531213615.7822-3-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09dmaengine: imx-sdma: Allow imx8m for imx7 FW revsPeter Robinson1-1/+1
The revision of the imx-sdma IP that is in the i.MX8M series is the same is that as that in the i.MX7 series but the imx7d MODULE_FIRMWARE directive is wrapped in a condiditional which means it's not defined when built for aarch64 SOC_IMX8M platforms and hence you get the following errors when the driver loads on imx8m devices: imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware Add the SOC_IMX8M into the check so the firmware can load on i.MX8. Fixes: 1474d48bd639 ("arm64: dts: imx8mq: Add SDMA nodes") Fixes: 941acd566b18 ("dmaengine: imx-sdma: Only check ratio on parts that support 1:1") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: stable@vger.kernel.org # v5.2+ Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20220606161034.3544803-1-pbrobinson@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09dmaengine: dmatest: Replace symbolic permissions by octal permissionsGeert Uytterhoeven1-15/+14
Octal permissions are easier to read. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/a745b883288f95e999b71fac677bbc2daa13c22d.1654702928.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09dmaengine: dmatest: Remove spaces before tabsGeert Uytterhoeven1-2/+2
Scripts/checkpath.pl says "please, no space before tabs". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/d863916120d043e3f9dd2f2670238c34f68f7d5f.1654702886.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09dmaengine: Revert "dmaengine: add verification of DMA_INTERRUPT capability ↵Vinod Koul1-10/+3
for dmatest" This reverts commit a8facc7b9885 ("dmaengine: add verification of DMA_INTERRUPT capability for dmatest") as it causes regression due to the fact that DMA_INTERRUPT in linked to dma_prep_interrupt() so checking that is incorrect here Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220606174906.3979283-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocateMiaoqian Lin1-0/+4
of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Fixes: a074ae38f859 ("dmaengine: Add driver for TI DMA crossbar on DRA7x") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220605042723.17668-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocateMiaoqian Lin1-0/+1
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not needed anymore. Add missing of_node_put() in to fix this. Fixes: ec9bfa1e1a79 ("dmaengine: ti-dma-crossbar: dra7: Use bitops instead of idr") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220605042723.17668-2-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-29Merge tag 'dmaengine-5.19-rc1' of ↵Linus Torvalds45-322/+2420
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Nothing special, this includes a couple of new device support and new driver support and bunch of driver updates. New support: - Tegra gpcdma driver support - Qualcomm SM8350, Sm8450 and SC7280 device support - Renesas RZN1 dma and platform support Updates: - stm32 device pause/resume support and updates - DMA memset ops Documentation and usage clarification - deprecate '#dma-channels' & '#dma-requests' bindings - driver updates for stm32, ptdma idsx etc" * tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits) dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled dmaengine: sun6i: Add support for the D1 variant dmaengine: sun6i: Add support for 34-bit physical addresses dmaengine: sun6i: Do not use virt_to_phys dt-bindings: dma: sun50i-a64: Add compatible for D1 dmaengine: tegra: Remove unused switch case dmaengine: tegra: Fix uninitialized variable usage dmaengine: stm32-dma: add device_pause/device_resume support dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done() dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor dmaengine: qcom: gpi: Add support for sc7280 dt-bindings: dma: pl330: Add power-domains dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler() dmaengine: stm32-mdma: remove GISR1 register dmaengine: ti: deprecate '#dma-channels' dmaengine: mmp: deprecate '#dma-channels' dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests' ...
2022-05-26Merge tag 'arm-multiplatform-5.19-1' of ↵Linus Torvalds1-6/+13
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...
2022-05-25Merge tag 'sound-5.19-rc1' of ↵Linus Torvalds2-6/+72
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Not much dramatic changes at this time, but we've received quite a lot of changes for ASoC, while there are still a few fixes and quirks for usual HD- and USB-auido. Here are some highlights. ASoC: - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs - Initial stages of Intel AVS driver merge - Introduction of v4 IPC mechanism for SOF - TDM mode support for AK4613 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780 Others: - A few regression fixes after the USB-audio endpoint management refactoring - More enhancements for Cirrus HD-audio codec support (still ongoing) - Addition of generic serial MIDI driver" * tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits) ALSA: hda/realtek - Add new type for ALC245 ALSA: usb-audio: Configure sync endpoints before data ALSA: ctxfi: fix typo in comment ALSA: cs5535audio: fix typo in comment ALSA: ctxfi: Add SB046x PCI ID ALSA: usb-audio: Add missing ep_idx in fixed EP quirks ALSA: usb-audio: Workaround for clock setup on TEAC devices ALSA: lola: Bounds check loop iterator against streams array size ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv() ASoC: rt1308-sdw: add the default value of register 0xc320 ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic ASoC: rt9120: Fix 3byte read, valule offset typo ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver. ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition() ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR' ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get() ASoC: SOF: mediatek: remove duplicate include in mt8195.c ASoC: SOF: mediatek: Add mt8195 debug dump ASoC: SOF: mediatek: Add mediatek common debug dump ...
2022-05-19dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabledDave Jiang1-1/+1
When calling idxd_wq_enable() and wq is already enabled, code should return 0 and indicate function is successful instead of return error code and fail. This should also put idxd_wq_enable() in sync with idxd_wq_disable() where it returns 0 if wq is already disabled. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165090980906.1378449.1939401700832432886.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: sun6i: Add support for the D1 variantSamuel Holland2-1/+2
So far it appears to match the configuration of the A100 variant. Since D1 is a RISC-V chip, it does not meet any of the existing dependencies for this driver, so relax the dependency somewhat. Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220424172759.33383-5-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: sun6i: Add support for 34-bit physical addressesSamuel Holland1-15/+38
Recent Allwinner SoCs support >4 GiB of DRAM, so those variants of the DMA engine support >32 bit physical addresses. This is accomplished by placing the high bits in the "para" word in the DMA descriptor. DMA descriptors themselves can be located at >32 bit addresses by putting the high bits in the LSBs of the descriptor address register, taking advantage of the required DMA descriptor alignment. However, support for this is not really necessary, so we can avoid the complication by allocating them from the DMA_32 zone. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220424172759.33383-4-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: sun6i: Do not use virt_to_physSamuel Holland1-19/+19
This breaks on RISC-V, because dma_pool_alloc returns addresses which are not in the linear map. Instead, plumb through the physical address which is already known anyway. Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220424172759.33383-3-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: tegra: Remove unused switch caseAkhil R1-4/+0
Remove unused switch case in get_transfer_param() function. The function is not called for MEM_TO_MEM transfers. Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Link: https://lore.kernel.org/r/20220426101913.43335-3-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: tegra: Fix uninitialized variable usageAkhil R1-4/+4
Initialize slave_bw in dma_prep*() functions as the parameter is not set for DMA_MEM_TO_MEM case in get_transfer_param(). Though the case may never occur, initializing it avoids warning from certain static checkers Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Link: https://lore.kernel.org/r/20220426101913.43335-2-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dma: add device_pause/device_resume supportAmelie Delaunay1-13/+234
At any time, a DMA transfer can be suspended to be restarted later before the end of the DMA transfer. In order to restart from the point where the transfer was stopped, DMA_SxNDTR has to be read after disabling the channel by clearing the EN bit in DMA_SxCR register, to know the number of data items already collected. Peripheral and/or memory addresses have to be updated in order to adjust the address pointers. SxNDTR register has to be updated with the remaining number of data items to be transferred (the value read when the channel was disabled). Then the channel can be re-enabled to resume the transfer from the point it was suspended. If the channel was configured in circular or double-buffer mode, the circular or double-buffer mode must be disabled before re-enabling the channel to be able to reconfigure SxNDTR register and re-activate circular or double-buffer mode on next Transfer Complete interrupt where channel will be disabled by HW. This is due to the fact that on resume, re-writing SxNDTR register value updates internal HW auto-reload data counter, and then it truncates all next transfers after a pause/resume sequence. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220505115611.38845-5-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dma: rename pm ops before dma pause/resume introductionAmelie Delaunay1-3/+3
dmaengine framework offers device_pause and device_resume ops to pause an on-going transfer and resume it later. To avoid any misunderstanding with system sleep pm ops, rename pm ops into stm32_dma_pm_suspend and stm32_dma_pm_resume. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220505115611.38845-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()Amelie Delaunay1-27/+27
stm32_dma_handle_chan_done() is called on Transfer Complete interrupt. As DMA_SxSCR register is read in interrupt handler, pass the value as parameter of stm32_dma_handle_chan_done(). Also return directly if chan->desc is null to remove one ident level. Then, stm32_dma_configure_next_sg() is doing something only if Double-Buffer Mode (DBM) is enabled, so, check it is enabled prior calling stm32_dma_configure_next_sg(), to remove one ident level in stm32_dma_configure_next_sg(). Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220505115611.38845-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sgAmelie Delaunay1-5/+9
chan->next_sg is used to know which transfer will start after the ongoing one. It is incremented for each new transfer, either on transfer start for non-cyclic transfers, or on transfer complete interrupt for cyclic transfers. For cyclic transfer, when the last item is reached, chan->next_sg must be reinitialized to the first item. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220505115611.38845-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessorAmelie Delaunay1-1/+1
One of the two DMA controllers managed by the DMAMUX can be used by the coprocessor. It is defined in the device tree with dma-masters. When the two DMA controllers are used by the main CPU, dma-masters = <&dma1, &dma2>; is specified in the device tree. When one of the controllers is used by coprocessor (so not managed by Linux), dma-masters = <&dma1>; is specified in the device tree. In this case, Linux driver must not reset the DMAMUX, because it could have been configured by the coprocessor to use the second DMA controller. count is the number of DMA controllers defined in dma-masters property. Reset only if resets property is found and valid in device tree, and if the two DMA controllers are under Linux control. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220504161724.123180-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: qcom: gpi: Add support for sc7280Vinod Koul1-0/+1
Add compatible and driver_data for GPI DMA engines found in Qualcomm SC7280. The driver_data contains ee_offset of 0x10000. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220421121733.1829350-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious itAmelie Delaunay1-3/+6
If interrupt occurs while !chan->busy, it means channel has been disabled between the raise of the interruption and the read of status and ien, so, spurious interrupt can be silently discarded. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220504155322.121431-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()Amelie Delaunay1-1/+1
The parameter to pass back to the handler function when irq has been requested is a struct stm32_mdma_device pointer, not a struct stm32_mdma_chan pointer. Even if chan is reinit later in the function, remove this wrong initialization. Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220504155322.121431-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: stm32-mdma: remove GISR1 registerAmelie Delaunay1-16/+5
GISR1 was described in a not up-to-date documentation when the stm32-mdma driver has been developed. This register has not been added in reference manual of STM32 SoC with MDMA, which have only 32 MDMA channels. So remove it from stm32-mdma driver. Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220504155322.121431-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: ti: deprecate '#dma-channels'Krzysztof Kozlowski1-1/+5
The generic property, used in most of the drivers and defined in generic dma-common DT bindings, is 'dma-channels'. Switch to new property while keeping backward compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220427161126.647073-4-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: mmp: deprecate '#dma-channels'Krzysztof Kozlowski1-5/+9
The generic property, used in most of the drivers and defined in generic dma-common DT bindings, is 'dma-channels'. Switch to new property while keeping backward compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220503065407.52188-4-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'Krzysztof Kozlowski1-3/+10
The generic properties, used in most of the drivers and defined in generic dma-common DT bindings, are 'dma-channels' and 'dma-requests'. Switch to new properties while keeping backward compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220503065407.52188-3-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: tegra: Fix build error without IOMMU_APIYueHaibing1-0/+1
drivers/dma/tegra186-gpc-dma.c: In function ‘tegra_dma_probe’: drivers/dma/tegra186-gpc-dma.c:1364:24: error: ‘struct iommu_fwspec’ has no member named ‘ids’ stream_id = iommu_spec->ids[0] & 0xffff; ^~ Make TEGRA186_GPC_DMA depends on IOMMU_API to fix this. Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220505093236.15076-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: dw: Add RZN1 compatibleMiquel Raynal1-0/+1
The Renesas RZN1 DMA IP is very close to the original DW DMA IP, a DMA router has been introduced to handle the wiring options that have been added. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220427095653.91804-8-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19dmaengine: dw: dmamux: Introduce RZN1 DMA router supportMiquel Raynal3-0/+166
The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional dmamux register located in the system control area which can take up to 32 requests (16 per DMA controller). Each DMA channel can be wired to two different peripherals. We need two additional information from the 'dmas' property: the channel (bit in the dmamux register) that must be accessed and the value of the mux for this channel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220427095653.91804-6-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: Remove unnecessary synchronize_irq() before free_irq()Minghao Chi1-1/+0
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220516115412.1651772-1-chi.minghao@zte.com.cn Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: add missing callback function to support DMA_INTERRUPTDave Jiang1-0/+22
When setting DMA_INTERRUPT capability, a callback function dma->device_prep_dma_interrupt() is needed to support this capability. Without setting the callback, dma_async_device_register() will fail dma capability check. Fixes: 4e5a4eb20393 ("dmaengine: idxd: set DMA_INTERRUPT cap bit") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165101232637.3951447.15765792791591763119.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: sprd: deprecate '#dma-channels'Krzysztof Kozlowski1-1/+5
The generic property, used in most of the drivers and defined in generic dma-common DT bindings, is 'dma-channels'. Switch to new property while keeping backward compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20220503065147.51728-3-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: skip irq free when wq type is not kernelDave Jiang1-0/+3
Skip wq irq resources freeing when wq type is not kernel since the driver skips the irq alloction during wq enable. Add check in wq type check in idxd_wq_free_irq() to mirror idxd_wq_request_irq(). Fixes: 63c14ae6c161 ("dmaengine: idxd: refactor wq driver enable/disable operations") Reported-by: Tony Zu <tony.zhu@intel.com> Tested-by: Tony Zu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165176310726.2112428.7474366910758522079.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: idxd: make idxd_register/unregister_dma_channel() staticDave Jiang2-4/+2
Since idxd_register/unregister_dma_channel() are only called locally, make them static. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165187583222.3287435.12882651040433040246.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-16dmaengine: zynqmp_dma: use pm_runtime_resume_and_get() instead of ↵Radhey Shyam Pandey1-1/+5
pm_runtime_get_sync() pm_runtime_resume_and_get() automatically handle dev->power.usage_count decrement on errors, so prefer using it and also implement it's error handling. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1652166762-18317-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.