| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
During the zip probe process, the debugfs failure does not stop
the probe. When debugfs initialization fails, jumping to the
error branch will also release regs, in addition to its own
rollback operation.
As a result, it may be released repeatedly during the regs
uninit process. Therefore, the null check needs to be added to
the regs uninit process.
Signed-off-by: Chenghai Huang <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
When CONFIG_PCI_IOV is disabled, the SRIOV configuration
function is not required. An error occurs if this function is
incorrectly called.
Consistent with other modules, add the condition for
configuring the sriov function of sec_pci_driver.
Signed-off-by: Chenghai Huang <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
If some cpus are offlined, or if the node mask is smaller than
expected, the 'nonexistent cpu' warning in rebalance_wq_table() may be
erroneously triggered.
Use cpumask_weight() to make sure we only iterate over the exact
number of cpus in the mask.
Also use num_possible_cpus() instead of num_online_cpus() to make sure
all slots in the wq table are initialized.
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add support for Tegra Security Engine which can accelerate various
crypto algorithms. The Engine has two separate instances within for
AES and HASH algorithms respectively.
The driver registers two crypto engines - one for AES and another for
HASH algorithms and these operate independently and both uses the host1x
bus. Additionally, it provides hardware-assisted key protection for up
to 15 symmetric keys which it can use for the cipher operations.
Signed-off-by: Akhil R <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
When both ACPI and OF are disabled, the dev_vdata variable is unused:
drivers/crypto/ccp/sp-platform.c:33:34: error: unused variable 'dev_vdata' [-Werror,-Wunused-const-variable]
This is not a useful configuration, and there is not much point in saving
a few bytes when only one of the two is enabled, so just remove all
these ifdef checks and rely on of_match_node() and acpi_match_device()
returning NULL when these subsystems are disabled.
Fixes: 6c5063434098 ("crypto: ccp - Add ACPI support")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The configuration option ZCRYPT_DEBUG is used only in ap queue code,
so rename it to AP_DEBUG. It also no longer depends on ZCRYPT but on
AP. While at it, also update the help text.
Signed-off-by: Holger Dengler <[email protected]>
Reviewed-by: Harald Freudenberger <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
There is no hard requirement to have the ap bus statically in the
kernel, so add an option to compile it as module.
Cc: Tony Krowiak <[email protected]>
Cc: Halil Pasic <[email protected]>
Signed-off-by: Holger Dengler <[email protected]>
Reviewed-by: Harald Freudenberger <[email protected]>
Reviewed-by: Anthony Krowiak <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
Use the `__struct_group()` helper to separate the flexible array
from the rest of the members in flexible `struct qat_alg_buf_list`,
through tagged `struct qat_alg_buf_list_hdr`, and avoid embedding the
flexible-array member in the middle of `struct qat_alg_fixed_buf_list`.
Also, use `container_of()` whenever we need to retrieve a pointer to
the flexible structure.
So, with these changes, fix the following warnings:
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/crypto/intel/qat/qat_common/qat_bl.h:25:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Acked-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The host SNP worthiness can determined later, after alternatives have
been patched, in snp_rmptable_init() depending on cmdline options like
iommu=pt which is incompatible with SNP, for example.
Which means that one cannot use X86_FEATURE_SEV_SNP and will need to
have a special flag for that control.
Use that newly added CC_ATTR_HOST_SEV_SNP in the appropriate places.
Move kdump_sev_callback() to its rightful place, while at it.
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Reviewed-by: Tom Lendacky <[email protected]>
Tested-by: Srikanth Aithal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In spu2_dump_omd() value of ptr is increased by ciph_key_len
instead of hash_iv_len which could lead to going beyond the
buffer boundaries.
Fix this bug by changing ciph_key_len to hash_iv_len.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Aleksandr Mishin <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally. So, we are deprecating flexible-array
members in the middle of another structure.
There is currently an object (`header`) in `struct nx842_crypto_ctx`
that contains a flexible structure (`struct nx842_crypto_header`):
struct nx842_crypto_ctx {
...
struct nx842_crypto_header header;
struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
...
};
So, in order to avoid ending up with a flexible-array member in the
middle of another struct, we use the `struct_group_tagged()` helper to
separate the flexible array from the rest of the members in the flexible
structure:
struct nx842_crypto_header {
struct_group_tagged(nx842_crypto_header_hdr, hdr,
... the rest of the members
);
struct nx842_crypto_header_group group[];
} __packed;
With the change described above, we can now declare an object of the
type of the tagged struct, without embedding the flexible array in the
middle of another struct:
struct nx842_crypto_ctx {
...
struct nx842_crypto_header_hdr header;
struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
...
} __packed;
We also use `container_of()` whenever we need to retrieve a pointer to
the flexible structure, through which we can access the flexible
array if needed.
So, with these changes, fix the following warning:
In file included from drivers/crypto/nx/nx-842.c:55:
drivers/crypto/nx/nx-842.h:174:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
174 | struct nx842_crypto_header header;
| ^~~~~~
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Convert AES module to use dma for data transfers to reduce cpu load and
compatible with future variants.
Signed-off-by: Jia Jie Ho <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Skip unneeded kfree_sensitive if RSA module is using falback algo.
Signed-off-by: Jia Jie Ho <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Current hash uses sw fallback for non-word aligned input scatterlists.
Add support for unaligned cases utilizing the data valid mask for dma.
Signed-off-by: Jia Jie Ho <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Change all the iaa statistics to use atomic64_t instead of the current
u64, to avoid potentially inconsistent counts.
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Currently, the wq_stats output also includes the global stats, while
the individual global stats are also available as separate debugfs
files. Since these are all read-only, there's really no reason to
have them as separate files, especially since we already display them
as global stats in the wq_stats. It makes more sense to just add a
separate global_stats file to display those, and remove them from the
wq_stats, as well as removing the individual stats files.
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
As part of the simplification/cleanup of the iaa statistics, remove
the comp/decomp delay statistics.
They're actually not really useful and can be/are being more flexibly
generated using standard kernel tracing infrastructure.
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Decomp stats should use slen, not dlen. Change both the global and
per-wq stats to use the correct value.
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add logic to implement the interface for live migration defined in
qat/qat_mig_dev.h. This is specific for QAT GEN4 Virtual Functions
(VFs).
This introduces a migration data manager which is used to handle the
device state during migration. The manager ensures that the device state
is stored in a format that can be restored in the destination node.
The VF state is organized into a hierarchical structure that includes a
preamble, a general state section, a MISC bar section and an ETR bar
section. The latter contains the state of the 4 ring pairs contained on
a VF. Here is a graphical representation of the state:
preamble | general state section | leaf state
| MISC bar state section| leaf state
| ETR bar state section | bank0 state section | leaf state
| bank1 state section | leaf state
| bank2 state section | leaf state
| bank3 state section | leaf state
In addition to the implementation of the qat_migdev_ops interface and
the state manager framework, add a mutex in pfvf to avoid pf2vf messages
during migration.
Signed-off-by: Xin Zeng <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Extend the driver with a new interface to be used for VF live migration.
This allows to create and destroy a qat_mig_dev object that contains
a set of methods to allow to save and restore the state of QAT VF.
This interface will be used by the qat-vfio-pci module.
Signed-off-by: Xin Zeng <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add logic to save, restore, quiesce and drain a ring bank for QAT GEN4
devices.
This allows to save and restore the state of a Virtual Function (VF) and
will be used to implement VM live migration.
Signed-off-by: Siming Wan <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Xin Zeng <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Extend the CSR operations for QAT GEN4 devices to allow saving and
restoring the rings state.
The new operations will be used as a building block for implementing the
state save and restore of Virtual Functions necessary for VM live
migration.
This adds the following operations:
- read ring status register
- read ring underflow/overflow status register
- read ring nearly empty status register
- read ring nearly full status register
- read ring full status register
- read ring complete status register
- read ring exception status register
- read/write ring exception interrupt mask register
- read ring configuration register
- read ring base register
- read/write ring interrupt enable register
- read ring interrupt flag register
- read/write ring interrupt source select register
- read ring coalesced interrupt enable register
- read ring coalesced interrupt control register
- read ring flag and coalesced interrupt enable register
- read ring service arbiter enable register
- get ring coalesced interrupt control enable mask
Signed-off-by: Siming Wan <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Xin Zeng <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The function get_sla_arr_of_type() returns a pointer to an SLA type
specific array.
Rename it and expose it as it will be used externally to this module.
This does not introduce any functional change.
Signed-off-by: Siming Wan <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Reviewed-by: Damian Muszynski <[email protected]>
Signed-off-by: Xin Zeng <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
As the common hw_data files are growing and the adf_hw_csr_ops is going
to be extended with new operations, move all logic related to ring CSRs
to the newly created adf_gen[2|4]_hw_csr_data.[c|h] files.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Xin Zeng <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move the code that implements VF version compatibility on the PF side to
a separate function so that it can be reused when doing VM live
migration.
This does not introduce any functional change.
Signed-off-by: Xin Zeng <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move and rename ADF_4XXX_PF2VM_OFFSET and ADF_4XXX_VM2PF_OFFSET to
ADF_GEN4_PF2VM_OFFSET and ADF_GEN4_VM2PF_OFFSET respectively.
These definitions are moved from adf_gen4_pfvf.c to adf_gen4_hw_data.h
as they are specific to GEN4 and not just to qat_4xxx.
This change is made in anticipation of their use in live migration.
This does not introduce any functional change.
Signed-off-by: Xin Zeng <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add and use the new helper function adf_get_etr_base() which retrieves
the virtual address of the ring bar.
This will be used extensively when adding support for Live Migration.
Signed-off-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Xin Zeng <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression that broke iwd as well as a divide by zero in
iaa"
* tag 'v6.9-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: iaa - Fix nr_cpus < nr_iaa case
Revert "crypto: pkcs7 - remove sha1 support"
|
|
If nr_cpus < nr_iaa, the calculated cpus_per_iaa will be 0, which
causes a divide-by-0 in rebalance_wq_table().
Make sure cpus_per_iaa is 1 in that case, and also in the nr_iaa == 0
case, even though cpus_per_iaa is never used if nr_iaa == 0, for
paranoia.
Cc: <[email protected]> # v6.8+
Reported-by: Jerry Snitselaar <[email protected]>
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Avoid unnecessary copying in scomp for trivial SG lists
Algorithms:
- Optimise NEON CCM implementation on ARM64
Drivers:
- Add queue stop/query debugfs support in hisilicon/qm
- Intel qat updates and cleanups"
* tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits)
Revert "crypto: remove CONFIG_CRYPTO_STATS"
crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem
crypto: tcrypt - add ffdhe2048(dh) test
crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags
crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags
hwrng: hisi - use dev_err_probe
MAINTAINERS: Remove T Ambarus from few mchp entries
crypto: iaa - Fix comp/decomp delay statistics
crypto: iaa - Fix async_disable descriptor leak
dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
dt-bindings: crypto: add sam9x7 in Atmel TDES
dt-bindings: crypto: add sam9x7 in Atmel SHA
dt-bindings: crypto: add sam9x7 in Atmel AES
crypto: remove CONFIG_CRYPTO_STATS
crypto: dh - Make public key test FIPS-only
crypto: rockchip - fix to check return value
crypto: jitter - fix CRYPTO_JITTERENTROPY help text
crypto: qat - make ring to service map common for QAT GEN4
crypto: qat - fix ring to service map for dcc in 420xx
crypto: qat - fix ring to service map for dcc in 4xxx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the x86 part of the SEV-SNP host support.
This will allow the kernel to be used as a KVM hypervisor capable of
running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP
is the ultimate goal of the AMD confidential computing side,
providing the most comprehensive confidential computing environment
up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the
next cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
* tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/sev: Disable KMSAN for memory encryption TUs
x86/sev: Dump SEV_STATUS
crypto: ccp - Have it depend on AMD_IOMMU
iommu/amd: Fix failure return from snp_lookup_rmpentry()
x86/sev: Fix position dependent variable references in startup code
crypto: ccp: Make snp_range_list static
x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
Documentation: virt: Fix up pre-formatted text block for SEV ioctls
crypto: ccp: Add the SNP_SET_CONFIG command
crypto: ccp: Add the SNP_COMMIT command
crypto: ccp: Add the SNP_PLATFORM_STATUS command
x86/cpufeatures: Enable/unmask SEV-SNP CPU feature
KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe
crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump
iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown
crypto: ccp: Handle legacy SEV commands when SNP is enabled
crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled
crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
x86/sev: Introduce an SNP leaked pages list
crypto: ccp: Provide an API to issue SEV and SNP commands
...
|
|
Add the missing CRYPTO_ALG_ASYNC flag since intel iaa driver
works asynchronously.
Signed-off-by: Barry Song <[email protected]>
Acked-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add the missing CRYPTO_ALG_ASYNC flag since hisilizon zip driver
works asynchronously.
Cc: Zhou Wang <[email protected]>
Signed-off-by: Barry Song <[email protected]>
Acked-by: Yang Shen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Found with git grep 'MODULE_AUTHOR(".*([^)]*@'
Fixed with
sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \
$(git grep -l 'MODULE_AUTHOR(".*([^)]*@')
Also:
in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc";
this is what every other MODULE_AUTHOR for this company says,
and it's what the header says
in drivers/sbus/char/openprom.c normalise a double-spaced separator;
this is clearly copied from the copyright header,
where the names are aligned on consecutive lines thusly:
* Linux/SPARC PROM Configuration Driver
* Copyright (C) 1996 Thomas K. Dyas ([email protected])
* Copyright (C) 1996 Eddie C. Dost ([email protected])
but the authorship branding is single-line
Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz
Signed-off-by: Ahelenia Ziemiańska <[email protected]>
Cc: Joe Perches <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The comp/decomp delay statistics currently have no callers; somehow
they were dropped during refactoring. There originally were also two
sets, one for the async algorithm, the other for the synchronous
version. Because the synchronous algorithm was dropped, one set should
be removed. To keep it consistent with the rest of the stats, and
since there's no ambiguity, remove the acomp/adecomp versions. Also
add back the callers.
Reported-by: Rex Zhang <[email protected]>
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The disable_async paths of iaa_compress/decompress() don't free idxd
descriptors in the async_disable case. Currently this only happens in
the testcases where req->dst is set to null. Add a test to free them
in those paths.
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The unprepare call must be carried out before the finalize call
as the latter can free the request.
Fixes: c66c17a0f69b ("crypto: rk3288 - Remove prepare/unprepare request")
Reported-by: Andrey Skvortsov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Reviewed-by: Andrey Skvortsov <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
sun8i_ce_cipher_unprepare should be called before
crypto_finalize_skcipher_request, because client callbacks may
immediately free memory, that isn't needed anymore. But it will be
used by unprepare after free. Before removing prepare/unprepare
callbacks it was handled by crypto engine in crypto_finalize_request.
Usually that results in a pointer dereference problem during a in
crypto selftest.
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000030
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000004716d000
[0000000000000030] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
This problem is detected by KASAN as well.
==================================================================
BUG: KASAN: slab-use-after-free in sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce]
Read of size 8 at addr ffff00000dcdc040 by task 1c15000.crypto-/373
Hardware name: Pine64 PinePhone (1.2) (DT)
Call trace:
dump_backtrace+0x9c/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
print_report+0xf8/0x5d8
kasan_report+0x90/0xd0
__asan_load8+0x9c/0xc0
sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce]
crypto_pump_work+0x354/0x620 [crypto_engine]
kthread_worker_fn+0x244/0x498
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Allocated by task 379:
kasan_save_stack+0x3c/0x68
kasan_set_track+0x2c/0x40
kasan_save_alloc_info+0x24/0x38
__kasan_kmalloc+0xd4/0xd8
__kmalloc+0x74/0x1d0
alg_test_skcipher+0x90/0x1f0
alg_test+0x24c/0x830
cryptomgr_test+0x38/0x60
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Freed by task 379:
kasan_save_stack+0x3c/0x68
kasan_set_track+0x2c/0x40
kasan_save_free_info+0x38/0x60
__kasan_slab_free+0x100/0x170
slab_free_freelist_hook+0xd4/0x1e8
__kmem_cache_free+0x15c/0x290
kfree+0x74/0x100
kfree_sensitive+0x80/0xb0
alg_test_skcipher+0x12c/0x1f0
alg_test+0x24c/0x830
cryptomgr_test+0x38/0x60
kthread+0x168/0x178
ret_from_fork+0x10/0x20
The buggy address belongs to the object at ffff00000dcdc000
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 64 bytes inside of
freed 256-byte region [ffff00000dcdc000, ffff00000dcdc100)
Signed-off-by: Andrey Skvortsov <[email protected]>
Fixes: 4136212ab18e ("crypto: sun8i-ce - Remove prepare/unprepare request")
Cc: <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
crypto_engine_alloc_init may fail, e.g., as result of a fail of
devm_kzalloc or kthread_create_worker. Other drivers (e.g.,
amlogic-gxl-core.c, aspeed-acry.c, aspeed-hace.c, jr.c, etc.) check
crypto_engine_alloc_init's return value and return -ENOMEM in case
a NULL pointer is returned. This patch inserts a corresponding
return value check to rk3288_crypto.c.
Signed-off-by: Kilian Zinnecker <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The function get_ring_to_svc_map() is present in both 420xx and
4xxx drivers. Rework the logic to make it generic to GEN4 devices
and move it to qat_common/adf_gen4_hw_data.c.
Signed-off-by: Damian Muszynski <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
If a device is configured for data compression chaining (dcc), half of the
engines are loaded with the symmetric crypto image and the rest are loaded
with the compression image.
However, in such configuration all rings can handle compression requests.
Fix the ring to service mapping so that when a device is configured for
dcc, the ring to service mapping reports that all rings in a bank can
be used for compression.
Fixes: fcf60f4bcf54 ("crypto: qat - add support for 420xx devices")
Signed-off-by: Damian Muszynski <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
If a device is configured for data compression chaining (dcc), half of the
engines are loaded with the symmetric crypto image and the rest are loaded
with the compression image.
However, in such configuration all rings can handle compression requests.
Fix the ring to service mapping so that when a device is configured for
dcc, the ring to service mapping reports that all rings in a bank can
be used for compression.
Fixes: a238487f7965 ("crypto: qat - fix ring to service map for QAT GEN4")
Signed-off-by: Damian Muszynski <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Move comment description to the same line as the function name.
This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
drivers/crypto/intel/qat/qat_common/qat_crypto.c:108: warning: missing initial short description on line:
* qat_crypto_vf_dev_config()
Signed-off-by: Adam Guerin <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Remove extra description from comments as it is not required.
This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
drivers/crypto/intel/qat/qat_common/adf_dev_mgr.c:65: warning: contents before sections
drivers/crypto/intel/qat/qat_common/adf_isr.c:380: warning: contents before sections
drivers/crypto/intel/qat/qat_common/adf_vf_isr.c:298: warning: contents before sections
Signed-off-by: Adam Guerin <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Remove double initialization of the reg variable.
This is to fix the following warning when compiling the QAT driver
using clang scan-build:
drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c:1010:6: warning: Value stored to 'reg' during its initialization is never read [deadcode.DeadStores]
1010 | u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SSMCPPERR);
| ^~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c:1109:6: warning: Value stored to 'reg' during its initialization is never read [deadcode.DeadStores]
1109 | u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SER_ERR_SSMSH);
| ^~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 99b1c9826e48 ("crypto: qat - count QAT GEN4 errors")
Signed-off-by: Adam Guerin <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Check if delta_us is not zero and return -EINVAL if it is.
delta_us is unlikely to be zero as there is a sleep between the reads of
the two timestamps.
This is to fix the following warning when compiling the QAT driver
using clang scan-build:
drivers/crypto/intel/qat/qat_common/adf_clock.c:87:9: warning: Division by zero [core.DivideZero]
87 | temp = DIV_ROUND_CLOSEST_ULL(temp, delta_us);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: e2980ba57e79 ("crypto: qat - add measure clock frequency")
Signed-off-by: Adam Guerin <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
This macro was added but never used, remove it.
This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
drivers/crypto/intel/qat/qat_common/adf_cnv_dbgfs.c:19:9: warning: macro is not used [-Wunused-macros]
19 | #define CNV_SLICE_ERR_MASK GENMASK(7, 0)
| ^
Fixes: d807f0240c71 ("crypto: qat - add cnv_errors debugfs file")
Signed-off-by: Adam Guerin <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
As a result of the removal of qat_zlib_deflate, some defines where not
removed. Remove them.
This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:21:9: warning: macro is not used [-Wunused-macros]
21 | #define QAT_RFC_1950_CM_OFFSET 4
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:16:9: warning: macro is not used [-Wunused-macros]
16 | #define QAT_RFC_1950_HDR_SIZE 2
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:17:9: warning: macro is not used [-Wunused-macros]
17 | #define QAT_RFC_1950_FOOTER_SIZE 4
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:22:9: warning: macro is not used [-Wunused-macros]
22 | #define QAT_RFC_1950_DICT_MASK 0x20
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:18:9: warning: macro is not used [-Wunused-macros]
18 | #define QAT_RFC_1950_CM_DEFLATE 8
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:20:9: warning: macro is not used [-Wunused-macros]
20 | #define QAT_RFC_1950_CM_MASK 0x0f
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:23:9: warning: macro is not used [-Wunused-macros]
23 | #define QAT_RFC_1950_COMP_HDR 0x785e
| ^
drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:19:9: warning: macro is not used [-Wunused-macros]
19 | #define QAT_RFC_1950_CM_DEFLATE_CINFO_32K 7
| ^
Fixes: e9dd20e0e5f6 ("crypto: qat - Remove zlib-deflate")
Signed-off-by: Adam Guerin <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|