| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim <[email protected]>:
add support exynos mct device tree and move into drivers/clocksource
* tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
clocksource: mct: Add terminating entry for exynos_mct_ids table
clocksource: mct: Add missing semicolons in exynos_mct.c
ARM: EXYNOS: move mct driver to drivers/clocksource
ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5
ARM: dts: add mct device tree node for all supported Exynos SoC's
ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init
ARM: EXYNOS: add device tree support for MCT controller driver
ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it
ARM: EXYNOS: add a register base address variable in mct controller driver
Conflicts:
drivers/clocksource/Makefile
drivers/clocksource/exynos_mct.c
[arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
This is a snapshot of the stable clk branch at
git://git.linaro.org/people/mturquette/linux.git clk-for-3.10
which is a dependency for the tegra clock changes.
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
This is a dependency for the tegra/clk branch.
Signed-off-by: Arnd Bergmann <[email protected]>
Conflicts:
drivers/clocksource/tegra20_timer.c
|
|
This is a dependency for the tegra multiplatform series.
Conflicts:
drivers/clocksource/tegra20_timer.c
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
This is a dependency for mxs/multiplatform
Signed-off-by: Arnd Bergmann <[email protected]>
Conflicts:
drivers/clocksource/Makefile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/multiplatform
From Linus Walleij <[email protected]>:
Ux500 multiplatform support. This tag builds upon the MFD-specific base
tag "ux500-multiplatform-mfd". This removes all <mach/*> dependencies
and makes the ux500 fully multi-platform.
* tag 'ux500-multiplatform-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: build hotplug.o for ARMv7-a
ARM: ux500: move to multiplatform
ARM: ux500: make remaining headers local
ARM: ux500: make irqs.h local to platform
ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
staging: ste_rmi4: kill platform_data hack
ARM: ux500: move mach/msp.h to <linux/platform_data/*>
clk: ux500: pass clock base adresses in init call
ARM: ux500: make debug macro stand-alone
ARM: ux500: move debugmacro to debug includes
ARM: ux500: split out prcmu initialization
mfd: db8500-prcmu: drop unused includes
ARM: ux500: move PM-related PRCMU functions to machine
mfd: db8500-prcmu: get base address from resource
mfd: prcmu: pass a base and size with the early initcall
Conflicts:
arch/arm/Kconfig
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup
From Shawn Guo <[email protected]>:
The mxs cleanup for 3.10:
* Clean up timer code and move it into drivers/clocksource
* Clean up icoll code and move it into drivers/irqchip
* Clean up clock code to not include <mach/*> headers
* Clean up rtc-stmp3xxx, mxs-lradc and mxs-saif to not include <mach/*>
headers
* Clean up mach-mxs code to get it prepared for multiplatform support
* tag 'mxs-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (26 commits)
clocksource: mxs_timer: Add semicolon at end of line
ARM: mxs: remove unused headers
ARM: mxs: merge imx23 and imx28 into one machine_desc
ARM: mxs: remove common.h
ARM: mxs: move mxs_get_ocotp() into mach-mxs.c
ARM: mxs: remove mm.c
ARM: mxs: use debug_ll_io_init for low-level debug
ARM: mxs: get ocotp base address from device tree
ARM: mxs: remove system.c
ARM: mxs: get reset address from device tree
ARM: mxs: remove empty hardware.h
ASoC: mxs-saif: remove mach header inclusion
iio: mxs-lradc: remove unneeded mach header inclusion
rtc: stmp3xxx: use stmp_reset_block() instead
clk: mxs: remove the use of mach level IO accessor
clk: mxs: get base address from device tree
ARM: mxs: remove unneeded mach-types.h inclusion
ARM: mxs: move icoll driver into drivers/irqchip
ARM: mxs: call stmp_reset_block() in icoll
ARM: mxs: get icoll base address from device tree
...
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup
From Stephen Warren <[email protected]>:
ARM: tegra: cleanup
This branch includes various cleanup of the core Tegra support.
* Unification of the separate board-dt-tegra*.c files into a single
tegra.c, now that everything is DT-driven and basically identical.
* Use of_clk_get() in the Tegra clocksource driver so that clocks are
described in DT rather than hard-coding clock names.
* Some cleanup of the PMC-related code, with the aim that the PMC
"driver" contains more of the code that touches PMC registers, rather
than spreading PMC register accesses through other files.
* Conversion of the "PMC" driver to acquire resources describe in device
tree rather than hard-coding them.
* Use of common code for the CPU sleep TLB invalidation.
This branch is based on the previous fixes pull request.
* tag 'tegra-for-3.10-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: use setup_mm_for_reboot rather than explicit pgd switch
ARM: tegra: replace the CPU power on function with PMC call
ARM: tegra: pmc: add power on function for secondary CPUs
ARM: tegra: pmc: convert PMC driver to support DT only
ARM: tegra: fix the PMC compatible string in DT
ARM: tegra: pmc: add specific compatible DT string for Tegra30 and Tegra114
ARM: tegra: refactor tegra{20,30}_boot_secondary
clocksource: tegra: move to of_clk_get
ARM: tegra: Unify Device tree board files
ARM: tegra: Rename board-dt-tegra20.c to tegra.c
ARM: tegra: Unify tegra{20,30,114}_init_early()
Conflicts:
drivers/clocksource/tegra20_timer.c
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
During the introduction of the Allwinner SoC platforms, sunxi was
initially meant as a generic name for all the variants of the Allwinner
SoC.
It was ok at the time of the support of only the A10 and A13 that
looks pretty much the same, but it's beginning to be troublesome with
the future addition of the Allwinner A31 (sun6i) that is quite
different, and would introduce some weird logic, where sunxi would
actually mean in some case sun4i and sun5i but without sun6i...
Moreover, it makes the compatible strings naming scheme not consistent
with other architectures, where usually for this kind of compability, we
just use the oldest SoC name that has this IP, so let's do just this.
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Using CLKSRC_OF allows to remove the SoC specific sunxi_timer.h header,
and instead of using a custom init function in the machine definition
use the standard clocksource_of_init function.
Signed-off-by: Maxime Ripard <[email protected]>
|
|
The timer code was not exact to some aspects, since most of this code
was written wihout any datasheet. Make the needed corrections to match
the datasheet.
Signed-off-by: Maxime Ripard <[email protected]>
|
|
|
|
next/drivers
From Michal Simek <[email protected]>:
* 'zynq/clksrc/cleanup' of git://git.xilinx.com/linux-xlnx:
arm: zynq: Move timer to generic location
arm: zynq: Do not use xilinx specific function names
arm: zynq: Move timer to clocksource interface
arm: zynq: Use standard timer binding
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
mach/setup.h and mach/devices.h are only needed from inside of mach-ux500
now, so we can simply move them out of the include/mach directory.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
This removes <mach/hardware.h> and <mach/db8500-regs.h>
from the Ux500, merging them into the local include
"db8500-regs.h" in mach-ux500. There is some impact
outside the ux500 machine, but most of it is dealt with
in earlier patches.
Contains portions of a clean-up patch from Arnd Bergmann.
Cc: Samuel Ortiz <[email protected]>
Cc: Ulf Hansson <[email protected]>
Acked-by: Mike Turquette <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
Move zynq timer out of mach folder to generic location
and enable it.
Signed-off-by: Michal Simek <[email protected]>
|
|
The of_device_id table is supposed to be zero-terminated.
Signed-off-by: Axel Lin <[email protected]>
Signed-off-by: Kukjin Kim <[email protected]>
|
|
The CLOCKSOURCE_OF_DECLARE lines were added without a semicolon at the
end. On my system this causes a compile-time error that looks like:
drivers/clocksource/exynos_mct.c:557:202: warning: comparison of distinct pointer types lacks a cast [enabled by default]
drivers/clocksource/exynos_mct.c:558:1: error: expected ',' or ';' before 'static'
The error didn't show up till now because there was an extra semicolon
at end of the CLOCKSOURCE_OF_DECLARE definition that was removed by
Arnd Bergmann in "clocksource: make CLOCKSOURCE_OF_DECLARE type safe"
Signed-off-by: Doug Anderson <[email protected]>
Signed-off-by: Kukjin Kim <[email protected]>
|
|
Fix the following build error:
drivers/clocksource/mxs_timer.c:304:1: error: expected ',' or ';' at end of input
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Move mxs timer driver into drivers/clocksource as mxs_timer.c.
Signed-off-by: Shawn Guo <[email protected]>
|
|
This adds support for the Broadcom timer, used in the following SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
Updates from V6:
- Split DT portion into a separate patch
Updates from V5:
- Rebase to latest arm-soc/for-next
Updates from V4:
- Switch code to use CLOCKSOURCE_OF_DECLARE
Updates from V3:
- Migrate to 3.9 timer framework updates
Updates from V2:
- prepend static fns + fields with kona_
Updates from V1:
- Rename bcm_timer.c to bcm_kona_timer.c
- Pull .h into bcm_kona_timer.c
- Make timers static
- Clean up comment block
- Switched to using clockevents_config_and_register
- Added an error to the get_timer loop if it repeats too much
- Added to Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt
- Added missing readl to timer_disable_and_clear
Note: bcm,kona-timer was kept as the 'compatible' field to make it
specific enough for when there are multiple bcm timers (bcm,timer is
too generic).
Signed-off-by: Christian Daudt <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: John Stultz <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
Signed-off-by: John Stultz <[email protected]>
|
|
This ensures that a function pointer passed into CLOCKSOURCE_OF_DECLARE
takes the same arguments that we use for calling that function later.
Also fix the extraneous semicolon at end of the CLOCKSOURCE_OF_DECLARE
definition.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Rob Herring <[email protected]>
|
|
This commit implements the base CPU clocks for sunxi devices. It has
been tested using a slightly modified cpufreq driver from the
linux-sunxi 3.0 tree.
Additionally, document the new bindings introduced by this patch.
Idling:
/ # cat /sys/kernel/debug/clk/clk_summary
clock enable_cnt prepare_cnt rate
---------------------------------------------------------------------
osc32k 0 0 32768
osc24M_fixed 0 0 24000000
osc24M 0 0 24000000
apb1_mux 0 0 24000000
apb1 0 0 24000000
pll1 0 0 60000000
cpu 0 0 60000000
axi 0 0 60000000
ahb 0 0 60000000
apb0 0 0 30000000
dummy 0 0 0
After "yes >/dev/null &":
/ # cat /sys/kernel/debug/clk/clk_summary
clock enable_cnt prepare_cnt rate
---------------------------------------------------------------------
osc32k 0 0 32768
osc24M_fixed 0 0 24000000
osc24M 0 0 24000000
apb1_mux 0 0 24000000
apb1 0 0 24000000
pll1 0 0 1008000000
cpu 0 0 1008000000
axi 0 0 336000000
ahb 0 0 168000000
apb0 0 0 84000000
dummy 0 0 0
Signed-off-by: Emilio López <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Mike Turquette <[email protected]>
|
|
This moves the two sirf clocksource drivers to drivers/clocksource
and integrates them into the framework for locating the clock sources
automatically.
Signed-off-by: Arnd Bergmann <[email protected]>
Tested-by: Barry Song <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Thomas Gleixner <[email protected]>
|
|
Add support for mct clock lookup and setup to ensure that the mct
clock is has been turned on.
Signed-off-by: Thomas Abraham <[email protected]>
Signed-off-by: Kukjin Kim <[email protected]>
|
|
With the migration of Exynos4 clocks to use common clock framework, the
old styled 'xtal' clock is not used anymore. Instead, the clock 'fin_pll'
is used as the tick clock for mct controller.
Signed-off-by: Thomas Abraham <[email protected]>
Signed-off-by: Kukjin Kim <[email protected]>
|
|
This ensures that a function pointer passed into CLOCKSOURCE_OF_DECLARE
takes the same arguments that we use for calling that function later.
Also fix the extraneous semicolon at end of the CLOCKSOURCE_OF_DECLARE
definition.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Rob Herring <[email protected]>
|
|
The reason for this is to ensure that MTU2 is probed earlier
than with its previous initcall level, module init.
This came up as a problem with using CMT as a clock source kzm9g-reference
which does not make use of early timers or devices. In that scenario
initialisation of SDHI and MMCIF both stall on msleep() calls due to the
absence of a initialised clock source.
The purpose of this change is to keep the MTU2 code in sync with the CMT code
which has been modified in a similar manner..
Compile tested only using se7206_defconfig.
I do not believe I have any boards that support the MTU2.
Signed-off-by: Simon Horman <[email protected]>
|
|
The reason for this is to ensure that STI is probed earlier
than with its previous initcall level, module init.
This came up as a problem with using CMT as a clock source kzm9g-reference
which does not make use of early timers or devices. In that scenario
initialisation of SDHI and MMCIF both stall on msleep() calls due to the
absence of a initialised clock source.
The purpose of this change is to keep the STI code in sync with the CMT code
which has been modified in a similar manner..
Boot tested on: kzm9d.
Signed-off-by: Simon Horman <[email protected]>
|
|
The reason for this is to ensure that TMU is probed earlier
than with its previous initcall level, module init.
This came up as a problem with using CMT as a clock source kzm9g-reference
which does not make use of early timers or devices. In that scenario
initialisation of SDHI and MMCIF both stall on msleep() calls due to the
absence of a initialised clock source.
The purpose of this change is to keep the TMU code in sync with the CMT code
which has been modified in a similar manner..
Boot tested on: mackerel.
Signed-off-by: Simon Horman <[email protected]>
|
|
The reason for this is to ensure that CMT is probed earlier
than with its previous initcall level, module init.
This came up as a problem with using kzm9g-reference which does
not make use of early timers or devices. In that scenario initialisation
of SDHI and MMCIF both stall on msleep() calls due to the absence
of a initialised clock source.
Boot tested on: armadillo800eva, mackerel and kzm9g
Signed-off-by: Simon Horman <[email protected]>
|
|
Add a comment about different register layouts
supported by the CMT driver.
Signed-off-by: Magnus Damm <[email protected]>
Acked-by: John Stultz <[email protected]>
Tested-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
This patch adds control register callbacks for the CMT
driver. At this point only 16-bit access is supported
but in the future this will be updated to allow 32-bit
access as well.
Signed-off-by: Magnus Damm <[email protected]>
Acked-by: John Stultz <[email protected]>
Tested-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
Break out the CMCNT and CMCOR register access code
into separate 16-bit and 32-bit functions that are
hooked into callbacks at init time. This reduces
the amount of software calculations happening at
runtime.
Signed-off-by: Magnus Damm <[email protected]>
Acked-by: John Stultz <[email protected]>
Tested-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
Update hardware register access code for CMSTR and CMCSR
from using sh_cmt_read() and sh_cmt_write() to make use
of 16-bit register access functions such as sh_cmt_read16()
and sh_cmt_write16(). Also update sh_cmt_read() and
sh_cmt_write() now when the special cases are gone.
This patch moves us one step closer to the goal of separating
counter register access functions from control control register
functions.
Signed-off-by: Magnus Damm <[email protected]>
Acked-by: John Stultz <[email protected]>
Tested-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
Cleanup the use of platform_set_drvdata() to reduce code size
Signed-off-by: Shinya Kuribayashi <[email protected]>
Signed-off-by: Magnus Damm <[email protected]>
Acked-by: John Stultz <[email protected]>
Tested-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
Introduce sh_cmt_read_cmstr/cmcsr/cmcnt() and
sh_cmt_write_cmstr/cmcsr/cmcnt/cmcor() to in the
future allow us to split counter registers from
control registers and reduce code complexity by
removing sh_cmt_read() and sh_cmt_write().
Signed-off-by: Magnus Damm <[email protected]>
Acked-by: John Stultz <[email protected]>
Tested-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
Move the setup of spinlock and max_match_value to sh_cmt_setup().
There's no need to defer those steps until sh_cmt_register().
Signed-off-by: Shinya Kuribayashi <[email protected]>
Signed-off-by: Magnus Damm <[email protected]>
Acked-by: John Stultz <[email protected]>
Tested-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
Make sure clk_put() is called in case of failure in sh_cmt_setup().
Signed-off-by: Shinya Kuribayashi <[email protected]>
Signed-off-by: Magnus Damm <[email protected]>
Acked-by: John Stultz <[email protected]>
Tested-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
The new clockframework introduced DT IDs for each clock. To be able to remove
the device registrations, this driver needs to be updated to use the DT IDs.
Note that the actual removal of the clk_register_clkdev() calls will be done
in a later series.
Signed-off-by: Peter De Schrijver <[email protected]>
Signed-off-by: Stephen Warren <[email protected]>
|
|
Now that we have OF based init with CLKSRC_OF, convert smp_twd init
function to use it and covert all callers of
twd_local_timer_of_register.
Signed-off-by: Rob Herring <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Russell King <[email protected]>
Cc: Viresh Kumar <[email protected]>
Cc: Shiraz Hashim <[email protected]>
Cc: Srinidhi Kasagar <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Stephen Warren <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Acked-by: Linus Walleij <[email protected]>
|
|
We've already matched the node, so use the node pointer passed in. The rtc
init was intermingled with the timer init, so split this out to a separate
init function.
Signed-off-by: Rob Herring <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
Tested-by: Stephen Warren <[email protected]>
|
|
In cases where we have multiple nodes of the same type, we may need the
node pointer to know which node was matched. Passing the node pointer
also keeps the init function from having to match the node a 2nd time.
Update bcm2835, vt8500, and tegra20 init functions for the new function
prototype. Further tegra20 clean-ups are in follow-up commit.
Signed-off-by: Rob Herring <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
Tested-by: Stephen Warren <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Tony Prisk <[email protected]>
Tested-by: Michal Simek <[email protected]>
|
|
Move the multi core timer (mct) driver to from mach-exynos
to drivers/clocksource and update the Kconfig and makefiles.
Cc: Changhwan Youn <[email protected]>
Signed-off-by: Thomas Abraham <[email protected]>
Reviewed-by: Stephen Warren <[email protected]>
Signed-off-by: Kukjin Kim <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull new ImgTec Meta architecture from James Hogan:
"This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of
metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()"
* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
metag: Provide dma_get_sgtable()
metag: prom.h: remove declaration of metag_dt_memblock_reserve()
metag: copy devicetree to non-init memory
metag: cleanup metag_ksyms.c includes
metag: move mm/init.c exports out of metag_ksyms.c
metag: move usercopy.c exports out of metag_ksyms.c
metag: move setup.c exports out of metag_ksyms.c
metag: move kick.c exports out of metag_ksyms.c
metag: move traps.c exports out of metag_ksyms.c
metag: move irq enable out of irqflags.h on SMP
genksyms: fix metag symbol prefix on crc symbols
metag: hugetlb: convert to vm_unmapped_area()
metag: export clear_page and copy_page
metag: export metag_code_cache_flush_all
metag: protect more non-MMU memory regions
metag: make TXPRIVEXT bits explicit
metag: kernel/setup.c: sort includes
perf: Enable building perf tools for Meta
metag: add boot time LNKGET/LNKSET check
metag: add __init to metag_cache_probe()
...
|
|
Add time keeping code for metag. Meta hardware threads have 2 timers.
The background timer (TXTIMER) is used as a free-running time base, and
the interrupt timer (TXTIMERI) is used for the timer interrupt. Both
counters traditionally count at approximately 1MHz.
Signed-off-by: James Hogan <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Thomas Gleixner <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC mvebu platform changes from Olof Johansson:
"This series contains changes for the Marvell EBU platforms (mvebu,
orion, kirkwood, dove) that were not part of the first set of pull
requests because of dependencies on the MMC tree, and being submitted
a little late.
Notable changes are:
- More devices get moved out of board files into device tree
descriptions. The remaining devices listed in there have patches
that will get sent for 3.10, after which we can remove a lot of the
board files entirely. We are doing the pinctrl and mmc drivers
here, ethernet and PCI still remain.
- SMP support for mvebu is improved with support for the local
interrupt controller.
- The Guruplug board file gets replaced with a DT description.
Unfortunately, the dependency on the MMC tree turned out to be a much
larger problem than expected, when the MMC maintainer rebased the
patches in his tree that all of the patches in this branch are based
on, which caused merge conflicts between the new and old versions of
those patches.
To work around the merge conflicts, this branch rebases all patches on
top of the respective MMC patches that did get merged into 3.9. The
patches are all identical to the versions that were part of
linux-next, but have a new commit date."
* tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits)
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
ARM: kirkwood: topkick: init mvsdio via DT
ARM: kirkwood: nsa310: convert to pinctrl
ARM: Kirkwood: topkick: Enable i2c bus.
ARM: kirkwood: topkick: convert to pinctrl
ARM: dove: convert serial DT nodes to clocks property
arm: mvebu: Add SPI flash on Armada 370 DB board
arm: mvebu: Add SPI flash on Armada XP-DB board
arm: mvebu: Add SPI flash on Armada XP-GP board
arm: mvebu: Add support for SPI controller in Armada 370/XP
clocksource: update and move armada-370-xp-timer documentation to timer directory
arm: mvebu: update DT to support local timers
ARM: Dove: convert usb host controller to DT
arm: mvebu: Enable USB controllers on Armada 370/XP boards
arm: mvebu: Add support for USB host controllers in Armada 370/XP
arm: mvebu: add button for OpenBlocks AX3-4
ARM: Kirkwood: Convert NS2 to gpio-poweroff.
ARM: Kirkwood: Convert NSA310 I2C to device tree
ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
ARM: Kirkwood: Convert NSA310 to DT based regulators.
...
|
|
On the SOCs Armada 370 and Armada XP, each CPU comes with two private
timers. This patch use the timer 0 of each CPU as local timer for the
clockevent if CONFIG_LOCAL_TIMER is selected. In the other case, use
only the private Timer 0 of CPU 0.
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Jason Cooper <[email protected]>
|
|
Basing the mvebu patches on top of the timer cleanup
avoids some nasty merges.
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar.
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource : Nomadik-mtu : fix missing irq initialization
posix-timer: Don't call idr_find() with out-of-range ID
|