| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested.
Fixes: ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC")
Signed-off-by: Gabor Juhos <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested.
Fixes: d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574")
Signed-off-by: Gabor Juhos <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested.
Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
Signed-off-by: Gabor Juhos <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested.
Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Gabor Juhos <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
clk_mt8173_apmixed_probe()
Add a label so that a bit of exception handling can be better reused
at the end of this function implementation.
Signed-off-by: Markus Elfring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: AngeloGiaocchino Del Regno <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
This allows to simplify drivers that use clk_rate_exclusive_get()
in their probe routine as calling clk_rate_exclusive_put() is cared for
automatically.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Use function names that match the implementation in kernel-doc comments
to avoid kernel-doc warnings:
dpll3xxx.c:938: warning: expecting prototype for omap3_non_core_dpll_save_context(). Prototype was for omap3_noncore_dpll_save_context() instead
dpll3xxx.c:967: warning: expecting prototype for omap3_core_dpll_restore_context(). Prototype was for omap3_noncore_dpll_restore_context() instead
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Tero Kristo <[email protected]>
Cc: [email protected]
Cc: Michael Turquette <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
The pointer div_addr is being assigned a value that is never used, it is
being re-assigned a different value near the end of the function where
it is being read in the next statement. The initialization is redundant
and can be removed.
Cleans up clang scan build warning:
drivers/clk/xilinx/clk-xlnx-clock-wizard.c:501:16: warning: Value stored
to 'div_addr' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Michal Simek <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
clkdev DEV ID information is limited to an array of 20 bytes
(MAX_DEV_ID). It is possible that the ID could be longer than
that. If so, the lookup will fail because the "real ID" will
not match the copied value.
For instance, generating a device name for the I2C Designware
module using the PCI ID can result in a name of:
i2c_designware.39424
clkdev_create() will store:
i2c_designware.3942
The stored name is one off and will not match correctly during probe.
Increase the size of the ID to allow for a longer name.
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Michael J. Ruhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Otherwise when when clk_i2s0 muxes to clk_i2s0_div which requires
setting high divider value on clk_i2s0_div, and then muxes back to
clk_i2s0_frac, clk_i2s0_frac would have no way to change the
clk_i2s0_div's divider ratio back to 1 so that it can satisfy the
condition for m/n > 20 for fractional division to work correctly.
Bug is reproducible by playing 44.1k audio, then 48k audio, and then
44.1k audio again. This results in clk_i2s0_div being set to 49 and
clk_i2s0_frac not being able to cope with such a low input clock rate
and audio playing extremely slowly.
The identical issue is on i2s1 and i2s2 clocks, too.
Signed-off-by: Ondrej Jirman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
In preparation for properly supporting GATE_LINK switch the unused
linked clock argument from the clock's name to its ID. This allows
easy and fast lookup of the 'struct clk'.
Signed-off-by: Sebastian Reichel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
pclk_mailbox2 is the only RK3588 clock indented with one tab instead of
two tabs. Let's fix this.
Signed-off-by: Sebastian Reichel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Currently pclk_vo1grf is not exposed, but it should be referenced
from the vo1_grf syscon, which needs it enabled. That syscon is
required for HDMI RX and TX functionality among other things.
Apart from that pclk_vo0grf and pclk_vo1grf are both linked gates
and need the VO's hclk enabled in addition to their parent clock.
No Fixes tag has been added, since the logic requiring these clocks
is not yet upstream anyways.
Signed-off-by: Sebastian Reichel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
|
|
CLK_NR_CLKS is not part of the DT bindings and needs to be removed
from it, just like it recently happened for other platforms. This
takes care of it by introducing a new function identifying the
maximum used clock ID at runtime.
Signed-off-by: Sebastian Reichel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Because of legacy reasons, the TI clksel composite clocks can have
overlapping reg properties, and use a custom ti,bit-shift property.
For the clksel clocks we can start using of the standard reg property
instead of the custom ti,bit-shift property.
To do this, let's add a ti_clk_get_legacy_bit_shift() helper, and make
ti_clk_get_reg_addr() populate the clock bit offset.
This makes it possible to update the devicetree files to use the reg
property one clock at a time.
Acked-by: Stephen Boyd <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
|
|
In order to use #address-cells = <1> and start making use of the
standard reg property, let's prepare things to ignore the possible
address in the clock node name.
Unless the clock-output-names property is used, the legacy clocks still
fall back to matching the clock data based on the node name.
We use cleanup.h to simplify the return path for freeing tmp.
Acked-by: Stephen Boyd <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
|
|
There is SAI1, SAI2, SAI3, SAI5, SAI6, SAI7 existing in this block
control, the order is discontinuous. The definition of SAI_MCLK_SEL(n)
is not match with the usage of CLK_SAIn(n).
So define SAI##n##_MCLK_SEL separately to fix the issue.
Fixes: 6cd95f7b151c ("clk: imx: imx8mp: Add audiomix block control")
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>
|
|
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
Signed-off-by: Markus Elfring <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>
|
|
__imx8m_clk_hw_composite()
Two local variables will eventually be set to appropriate pointers
a bit later. Thus omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>
|
|
after error detection
The function “kfree” was called in up to three cases
by the function “__imx8m_clk_hw_composite” during error handling
even if the passed variables contained a null pointer.
Adjust jump targets according to the Linux coding style convention.
Signed-off-by: Markus Elfring <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>
|
|
Implement CPU clock control for Exynos850 SoC. It follows the same
procedure which is already implemented for other SoCs in clk-cpu.c:
1. Set the correct rate for the alternate parent (if needed) before
switching to use it as the CPU clock
2. Switch to the alternate parent, so the CPU continues to get clocked
while the PLL is being re-configured
3. Adjust the dividers for the CPU related buses (ACLK, ATCLK, etc)
4. Re-configure the PLL for the new CPU clock rate. It's done
automatically, as the CPU clock rate change propagates to the PLL
clock, because the CPU clock has CLK_SET_RATE_PARENT flag set in
exynos_register_cpu_clock()
5. Once the PLL is locked, set it back as the CPU clock source
6. Set alternate parent clock rate back to max speed
As in already existing clk-cpu.c code, the divider and mux clocks are
configured in a low-level fashion (using direct register access instead
of CCF API), to avoid affecting how DIV and MUX clock flags are declared
in the actual clock driver (clk-exynos850.c).
No functional change. This patch adds support for Exynos850 CPU clock,
but doesn't enable it per se.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Make it possible to use wait_until_mux_stable() for MUX registers where
the mask is different from MUX_MASK (e.g. in upcoming CPU clock
implementation for Exynos850).
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Abstract CPU clock registers by keeping their offsets in a dedicated
chip specific structure to accommodate for oncoming Exynos850 support,
which has different offsets for cluster 0 and cluster 1. This rework
also makes it possible to use exynos_set_safe_div() for all chips, so
exynos5433_set_safe_div() is removed here to reduce the code
duplication. The ".regs" field has to be (void *) as different Exynos
chips can have very different register layout, so this way it's possible
for ".regs" to point to different structures, each representing its own
chip's layout.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[krzysztof: drop redundant const for regs in exynos_cpuclk_chip]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Keep chip specific data in the data structure, don't mix it with code.
It makes it easier to add more chip specific data further. Having all
chip specific data in the table eliminates possible code bloat when
adding more rate handlers for new chips, and also makes it possible to
keep some other chip related data in that array.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Use a dedicated enum field to explicitly specify which register layout
should be used for the CPU clock, instead of passing it as a bit flag.
This way it would be possible to keep the chip-specific data in some
array, where each chip structure could be accessed by its corresponding
layout index. It prepares clk-cpu.c for adding new chips support, which
might have different data for different CPU clusters.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
The documentation for struct exynos_cpuclk says .ctrl_base field should
contain the controller base address. There are two different problems
with that:
1. All Exynos clock drivers are actually passing CPU_SRC register offset
via CPU_CLK() macro, which in turn gets assigned to mentioned
.ctrl_base field. Because CPU_SRC register usually already has 0x200
offset from controller's base, all other register offsets in
clk-cpu.c (like DIVs and MUXes) are specified as offsets from CPU_SRC
offset, and not from controller's base. That makes things confusing
and inconsistent with register offsets provided in Exynos clock
drivers, also breaking the contract for .ctrl_base field as described
in struct exynos_cpuclk doc.
2. Furthermore, some Exynos chips have an additional offset for the
start of CPU clock registers block (inside of the CMU). There might
be different reasons for that, e.g.:
- The CMU contains clocks for two different CPUs (like in Exynos5420)
- The CMU contains also non-CPU clocks as well (like in Exynos4)
- The CPU CMU exists as a dedicated hardware block in the SoC layout,
but is modelled as a part of bigger CMU in the driver (like in case
of Exynos3250)
That means the .ctrl_base field is actually not a controller's base,
but instead it's a start address of the CPU clock registers inside of
the CMU.
Rework all register offsets in clk-cpu.c to be actual offsets from the
CPU clock register block start, and fix offsets provided to CPU_CLK()
macro in all Exynos clock drivers. Also clarify the .ctrl_base field
documentation and rename it to just .base, because it doesn't really
contain the CMU base.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
clk-cpu.c is going to get messy as new chips support is added.
Restructure the code by pulling related functions and definitions
together, grouping those by their relation to a particular chip or other
categories, to simplify the code navigation.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Reduce the code duplication by making all chips use a single version of
exynos_cpuclk_notifier_cb() function. That will prevent the code bloat
when adding new chips support too.
Also don't pass base address to pre/post rate change functions, as it
can be easily derived from already passed cpuclk param.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Pass CPU clock data structure to exynos_register_cpu_clock() instead of
passing its fields separately there. That simplifies the signature of
exynos_register_cpu_clock() and makes it easier to add more fields to
struct samsung_cpu_clock later. This style follows the example of
samsung_clk_register_pll().
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Reduce the scope of struct exynos_cpuclk, as it's only used in clk-cpu.c
internally. All drivers using clk-pll.h already include clk.h as well,
so this change doesn't break anything.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
clk-cpu.c has numerous style issues reported by checkpatch and easily
identified otherwise. Give it some love and fix those warnings where it
makes sense. Also make stabilization time a named constant to get rid of
the magic number in clk-cpu.c.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Add four functions to register clk_hw based on the fw_name field in
clk_parent_data, ie the value in the DT property `clock-names`.
There are variants for devm or not and passing an accuracy or not
passing one:
- clk_hw_register_fixed_factor_fwname
- clk_hw_register_fixed_factor_with_accuracy_fwname
- devm_clk_hw_register_fixed_factor_fwname
- devm_clk_hw_register_fixed_factor_with_accuracy_fwname
The `struct clk_parent_data` init is extracted from
__clk_hw_register_fixed_factor to each calling function. It is required
to allow each function to pass whatever field they want, not only index.
Signed-off-by: Théo Lebrun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Fixed factor clock reports the parent clock accuracy. Add flags and acc
fields to `struct clk_fixed_factor` to support setting a fixed
accuracy. The default if no flag is set is not changed: use the parent
clock accuracy.
Signed-off-by: Théo Lebrun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Most of clocks and their parents are defined in contiguous range,
But in few cases, there is gap in clock numbers[0].
Driver assumes clocks to be in contiguous range, and add their clock
ids incrementally.
New firmware started returning error while calling get_freq and is_on
API for non-available clock ids.
In this fix, driver checks and adds only valid clock ids.
[0] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j7200/clocks.html
Section Clocks for NAVSS0_CPTS_0 Device, clock id 12-15 not present.
Fixes: 3c13933c6033 ("clk: keystone: sci-clk: add support for dynamically probing clocks")
Signed-off-by: Udit Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Nishanth Menon <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Correct the function name in the kernel-doc comment to match the
actual function name to avoid a kernel-doc warning:
drivers/clk/keystone/sci-clk.c:287: warning: expecting prototype for _sci_clk_get(). Prototype was for _sci_clk_build() instead
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Nishanth Menon <[email protected]>
Cc: Tero Kristo <[email protected]>
Cc: Santosh Shilimkar <[email protected]>
Cc: [email protected]
Cc: Michael Turquette <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Nishanth Menon <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
In order to calculate correct FSI bus clocks, the FSI clock must
correctly calculate the rate from the parent (APLL / 4).
Signed-off-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
The variable 'rate' being assigned a value that is never read, the
assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/clk/clk-cdce925.c:104:3: warning: Value stored to 'rate' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Provide a managed devm_clk_bulk* wrapper to get and enable all
bulk clocks in order to simplify drivers that keeps all clocks
enabled for the time of driver operation.
Suggested-by: Marek Szyprowski <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Shradha Todi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Infracfg can also operate as reset controller, add support for it.
Signed-off-by: Frank Wunderlich <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Without the SGM_REG_SEL clock enabled the cpu freezes if trying to
access registers used by MT7981 clock drivers itself.
Mark SGM_REG_SEL as critical to make sure it is always enabled to
prevent freezes on boot even if the Ethernet driver which prepares
and enables the clock is not loaded or probed at a later point.
Fixes: 813c3b53b55b ("clk: mediatek: add MT7981 clock support")
Signed-off-by: Daniel Golle <[email protected]>
Link: https://lore.kernel.org/r/fc157139e6b7f8dfb6430ac7191ba754027705e8.1708221995.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
CLK_INFRA_SSPM_32K_SELF has the "f_f26m_ck" clock assigned as its parent.
This is inconsistent as the clock is part of a group that are all gates
without dividers, and this makes the kernel think it runs at 26 MHz.
After clarification from MediaTek engineers, the correct parent is
actually the system 32 KHz clock.
Fixes: 1eb8d61ac5c9 ("clk: mediatek: mt8183: Add back SSPM related clocks")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
clk_mt8135_apmixed_probe()
'clk_data' is allocated with mtk_devm_alloc_clk_data(). So calling
mtk_free_clk_data() explicitly in the remove function would lead to a
double-free.
Remove the redundant call.
Fixes: c50e2ea6507b ("clk: mediatek: mt7622-apmixedsys: Add .remove() callback for module build")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/2c553c2a5077757e4f7af0bb895acc43881cf62c.1704616152.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
If an error occurs after mtk_alloc_clk_data(), mtk_free_clk_data() should
be called, as already done in the remove function.
Fixes: 54b7026f011e ("clk: mediatek: mt8135-apmixedsys: Convert to platform_driver and module")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/6cd6af61e5a91598068227f1f68cfcfde1507453.1704615011.git.christophe.jaillet@wanadoo.fr
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific devm_kcalloc() function instead of the
argument size * count in the devm_kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
'p_clk' is an array allocated just before the for loop for all clk that
need to be registered.
It is incremented at each loop iteration.
If a clk_register() call fails, 'p_clk' may point to something different
from what should be freed.
The best we can do, is to avoid this wrong release of memory.
Fixes: 6c81966107dc ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/773fc8425c3b8f5b0ca7c1d89f15b65831a85ca9.1705850155.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <[email protected]>
|
|
hi3519_clk_unregister()
The gates are stored in 'hi3519_gate_clks', not 'hi3519_mux_clks'.
This is also in line with how hisi_clk_register_gate() is called in the
probe.
Fixes: 224b3b262c52 ("clk: hisilicon: hi3519: add driver remove path and fix some issues")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/c3f1877c9a0886fa35c949c8f0ef25547f284f18.1704912510.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Add the module clock used by the SPI Multi I/O Bus Controller (RPC-IF)
on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Cong Dang <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Link: https://lore.kernel.org/r/07a72378ca64b44341af960f042a6efd41d10dc3.1708354355.git.geert+renesas@glider.be
|
|
Add the module clocks used by the Direct Memory Access Controllers for
System (SYS-DMAC) on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Cong Dang <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Link: https://lore.kernel.org/r/0285ef5d0c0c9d232e196559c9130ab46733d7f7.1707915706.git.geert+renesas@glider.be
|