aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2015-12-17clk: tegra: pll: Add Set_default logicBill Huang2-11/+39
Add logic which (if specified for a pll) can verify that a PLL is set to the proper default value and if not can set it. This can be specified per PLL as each will have different default values. Based on original work by Aleksandr Frid <afrid@nvidia.com> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Adjust vco_min if SDM presentBill Huang2-0/+32
This code makes use of the SDM fractional divider if present to constrain the allowable programming range of the PLL divider register bitfields to take advantage of higher frequency granularity that can be induced by the SDM divider. Based on original work by Aleksandr Frid <afrid@nvidia.com> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Add support for PLLMB for Tegra210Rhyland Klein2-5/+52
Tegra210 SoC's have 2 PLLs for memory usage. Add plumbing to register and handle PLLMB. PLLMB is used to allow switching between 2 PLLM's without having to use and intermediate backup PLL, as we need to lock the PLL before we can switch to it. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-17clk: tegra: pll: Add specialized logic for Tegra210Rhyland Klein2-2/+346
On Tegra210 SoC's, the logic to enable several of the plls is different from previous generations. Therefore, add registration functions specific to Tegra210 which will handle them appropriately. Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-16clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for aclk_vioYakir Yang1-1/+1
ACLK_VIO is the noc bus clock for display module, display cann't read data from ddr without this clock enabled. Due to it shouldn't belong to any driver, but we need it enabled, so just mark it as the CLK_IGNORE_UNUSED flag. Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-16clk: s3c2410: removed unneeded variable in s3c24xx_clkout_set_parentPrasanna Karthik1-2/+1
Remove unneeded variable used to store return value. Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-12-16clk: exynos: use irqsave version of spin_lock to avoid deadlock with irqsMarek Szyprowski1-4/+6
It is allowed to enable/disable clocks from interrupts, so common Exynos ARM clock management code for CPUfreq should use 'irqsave' version of spin_lock calls to avoid potential deadlock caused by spin_lock recursion. The same spin_lock is used by gate/mux clocks during enable/disable calls. This deadlock, can be reproduced by enabling CPUfreq (ondemand or userspace) and decoding video with s5p-mfc driver. Relevant stack trace: [ 5928.061534] BUG: spinlock recursion on CPU#0, bash/1252 [ 5928.061609] lock: 0xee80454c, .magic: dead4ead, .owner: bash/1252, .owner_cpu: 0 [ 5928.068586] CPU: 0 PID: 1252 Comm: bash Tainted: G W 4.4.0-rc4-00001-g447a7fd #678 [ 5928.077260] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 5928.083359] [<c00153dc>] (unwind_backtrace) from [<c00121b4>] (show_stack+0x10/0x14) [ 5928.091072] [<c00121b4>] (show_stack) from [<c0213e28>] (dump_stack+0x68/0xb8) [ 5928.098275] [<c0213e28>] (dump_stack) from [<c005c1ec>] (do_raw_spin_lock+0x184/0x1ac) [ 5928.106177] [<c005c1ec>] (do_raw_spin_lock) from [<c05cfa98>] (_raw_spin_lock_irqsave+0x20/0x28) [ 5928.114943] [<c05cfa98>] (_raw_spin_lock_irqsave) from [<c0468698>] (clk_gate_endisable+0x24/0x98) [ 5928.123882] [<c0468698>] (clk_gate_endisable) from [<c0464d40>] (clk_core_disable+0x60/0x84) [ 5928.132299] [<c0464d40>] (clk_core_disable) from [<c0465e00>] (clk_disable+0x24/0x30) [ 5928.140117] [<c0465e00>] (clk_disable) from [<c03f3b80>] (s5p_mfc_handle_frame+0x254/0x860) [ 5928.148445] [<c03f3b80>] (s5p_mfc_handle_frame) from [<c03f4b34>] (s5p_mfc_irq+0x890/0xa24) [ 5928.156778] [<c03f4b34>] (s5p_mfc_irq) from [<c00627bc>] (handle_irq_event_percpu+0x50/0x14c) [ 5928.165283] [<c00627bc>] (handle_irq_event_percpu) from [<c00628f0>] (handle_irq_event+0x38/0x5c) [ 5928.174143] [<c00628f0>] (handle_irq_event) from [<c0065864>] (handle_fasteoi_irq+0xdc/0x1a4) [ 5928.182645] [<c0065864>] (handle_fasteoi_irq) from [<c0062090>] (generic_handle_irq+0x18/0x28) [ 5928.191236] [<c0062090>] (generic_handle_irq) from [<c00621a4>] (__handle_domain_irq+0x6c/0xdc) [ 5928.199917] [<c00621a4>] (__handle_domain_irq) from [<c0009470>] (gic_handle_irq+0x4c/0x98) [ 5928.208249] [<c0009470>] (gic_handle_irq) from [<c0012c54>] (__irq_svc+0x54/0x90) [ 5928.215709] Exception stack(0xeddb5cb8 to 0xeddb5d00) [ 5928.220745] 5ca0: ee80454c faddfadc [ 5928.228906] 5cc0: 00000000 01000001 ee831ce0 f8114200 ee807c00 01130520 00000403 eddb5d84 [ 5928.237063] 5ce0: ee807c48 2faf0800 ee807c0c eddb5d08 c046b618 c046b634 20000053 ffffffff [ 5928.245225] [<c0012c54>] (__irq_svc) from [<c046b634>] (exynos_cpuclk_notifier_cb+0x170/0x270) [ 5928.253823] [<c046b634>] (exynos_cpuclk_notifier_cb) from [<c003cb58>] (notifier_call_chain+0x44/0x84) [ 5928.263106] [<c003cb58>] (notifier_call_chain) from [<c003ccd4>] (__srcu_notifier_call_chain+0x6c/0x9c) [ 5928.272480] [<c003ccd4>] (__srcu_notifier_call_chain) from [<c003cd1c>] (srcu_notifier_call_chain+0x18/0x20) [ 5928.282288] [<c003cd1c>] (srcu_notifier_call_chain) from [<c0464ed0>] (__clk_notify+0x6c/0x74) [ 5928.290881] [<c0464ed0>] (__clk_notify) from [<c0465388>] (clk_propagate_rate_change+0xa0/0xac) [ 5928.299561] [<c0465388>] (clk_propagate_rate_change) from [<c0465378>] (clk_propagate_rate_change+0x90/0xac) [ 5928.309370] [<c0465378>] (clk_propagate_rate_change) from [<c04666fc>] (clk_core_set_rate_nolock+0x64/0xa8) [ 5928.319091] [<c04666fc>] (clk_core_set_rate_nolock) from [<c0466760>] (clk_set_rate+0x20/0x30) [ 5928.327686] [<c0466760>] (clk_set_rate) from [<c0428c70>] (set_target+0xe8/0x23c) [ 5928.335152] [<c0428c70>] (set_target) from [<c04244d0>] (__cpufreq_driver_target+0x184/0x29c) [ 5928.343655] [<c04244d0>] (__cpufreq_driver_target) from [<c0427128>] (cpufreq_set+0x44/0x64) [ 5928.352074] [<c0427128>] (cpufreq_set) from [<c0423948>] (store_scaling_setspeed+0x5c/0x74) [ 5928.360407] [<c0423948>] (store_scaling_setspeed) from [<c04238d0>] (store+0x7c/0x98) [ 5928.368221] [<c04238d0>] (store) from [<c0132540>] (sysfs_kf_write+0x44/0x48) [ 5928.375338] [<c0132540>] (sysfs_kf_write) from [<c0131b9c>] (kernfs_fop_write+0xb8/0x1bc) [ 5928.383496] [<c0131b9c>] (kernfs_fop_write) from [<c00d71f8>] (__vfs_write+0x2c/0xd4) [ 5928.391308] [<c00d71f8>] (__vfs_write) from [<c00d7de8>] (vfs_write+0xa0/0x144) [ 5928.398598] [<c00d7de8>] (vfs_write) from [<c00d8048>] (SyS_write+0x44/0x84) [ 5928.405631] [<c00d8048>] (SyS_write) from [<c000f540>] (ret_fast_syscall+0x0/0x3c) CC: stable@vger.kernel.org # v4.2+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-12-16clk: samsung: exynos542x: fix MFC clock hierarchy parentMarek Szyprowski1-1/+1
Proper source for MFC block is mout_user_aclk333 (in datasheet named USER_MUX_ACLK_333), not the output of CLKDIV_ACLK_333 MUX. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-12-16clk: samsung: exynos542x/5800: fix cpu clock configuration dataBartlomiej Zolnierkiewicz1-3/+33
Fix cpu clock configuration data for Exynos5422/5800 SoCs (they use higher PCLK_DBG divider values than Exynos5420 and support additional frequencies). Based on Hardkernel's kernel for ODROID-XU3 board. Cc: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-12-16clk: samsung: exynos5420: add cpu clock configuration data and instantiate ↵Thomas Abraham1-2/+56
cpu clock With the addition of the new Samsung specific cpu-clock type, the arm clock can be represented as a cpu-clock type. Add the CPU clock configuration data and instantiate the CPU clock type for Exynos5420. Changes by Bartlomiej: - split Exynos5420 support from the original patches - moved E5420_[EGL,KFC]_DIV0() macros to clk-exynos5420.c Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-12-16clk: samsung: exynos542x: add missing parent GSCL block clocksMarek Szyprowski1-4/+4
This patch adds clocks, which are required for preserving parent clock configuration on GSCL power domain on/off. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-12-16Merge tag 'realview-base-armsoc-1-tag' of ↵Arnd Bergmann3-36/+169
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/multiplatform Merge "Realview multiplatform support" from Linus Walleij: The board and infrastructure changes for RealView multiplatform and extended DT support. * tag 'realview-base-armsoc-1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: realview: add an DT SMP boot method ARM: realview: select SP810 and ICST for the DT variant soc: versatile: add support for the PB11MPCore clk: versatile-icst: add device tree support clk: versatile-icst: refactor to allocate regmap separately clk: versatile-icst: convert to use regmap ARM: realview: remove private barrier implementation ARM: no longer force unbuffered DMA for realview clk/realview: stop using machine headers ARM: realview: don't map undefined PCI registers ARM: realview: remove sparsemem hack Conflicts: drivers/clk/versatile/Kconfig
2015-12-15Merge branch 'versatile/multiplatform' into next/multiplatformArnd Bergmann1-1/+3
Merge "ARM Versatile multi-platform support" from Rob Herring: Arnd lit a fire under me to dust this off and get it merged. So here it is. The main change from prior version is I merged all the code to a single file. It's a bigger patch than I'd like, but I don't think trying to do it in multiple steps is worth it. This is dependent on some solution for the default platform choice on !MMU builds (allnoconfig) as it can't be Versatile after this series. Arnd has some ideas on how to address that. This is tested under QEMU. Linus previously tested this on actual h/w and had a problem with the display identification which needs investigation or agreement to worry about it if and when someone actually cares. * versatile/multiplatform: ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-15ARM: versatile: switch to DT only booting and remove legacy codeRob Herring1-1/+3
With DT support for clocks, irqchips, timers, and PCI now in place, DT based booting has feature parity with non-DT legacy boot. The final piece is actually enabling common clock support on Versatile. Enabling full DT support requires either removing the old Versatile clock code, updating the legacy boot to use the common clock code, or making DT and legacy boot mutually exclusive. Given that removing legacy boot code is the goal anyway, I am going with the 1st option. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-15Merge branch 'mmp/multiplatform' into next/multiplatformArnd Bergmann3-19/+19
* mmp/multiplatform: ARM: mmp: avoid unused functions ARM: mmp: move into ARCH_MULTIPLATFORM ARM: mmp: make all header files local ARM: mmp: make plat-pxa build standalone ARM: mmp: remove remaining legacy pxa-dma support ARM: mohawk: allow building with MMU disabled ARM: make xscale iwmmxt code multiplatform aware clk: mmp: stop using platform headers
2015-12-15clk: versatile-icst: add device tree supportLinus Walleij1-1/+88
This adds support for the ARM syscon ICST clocks to initialized directly from the device tree syscon node on ARM Integrator, Versatile and RealView reference designs. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15clk: versatile-icst: refactor to allocate regmap separatelyLinus Walleij1-19/+28
Break out the registration function so it creates a regmap and pass to the setup function, so the latter can be shared with a device tree probe function that already has a regmap. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15clk: versatile-icst: convert to use regmapLinus Walleij2-28/+61
Instead of passing around register bases, pass around a regmap in this driver. This refactoring make things so much easier when we later want to manage an ICST that is part of a syscon. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15clk/realview: stop using machine headersArnd Bergmann1-3/+7
In order to move realview into multiplatform, we have to prevent device drivers from accessing the machine header files. In case of the clk driver, this is very simple, we just copy the small set of register definitions into the driver that needs them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-14clk: sunxi: fix handling return value of of_property_match_stringAndrzej Hajda1-4/+4
The function can return negative values, so its result should be assigned to signed variable. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-13clk: sunxi: signedness bug in sun8i_h3_bus_gates_init()Dan Carpenter1-1/+1
"index" needs to be signed for the error handling to work. Fixes: ab6e23a4e388 ('clk: sunxi: Add H3 clocks support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a bunch of small bug fixes for various ARM platforms, nothing really sticks out this week, most of either fixes bugs in code that was just added in 4.4, or that has been broken for many years without anyone noticing. at91/sama5d2: - fix sama5de hardware setup of sd/mmc interface - proper selection of pinctrl drivers. PIO4 is necessary for sama5d2 berlin: - fix incorrect clock input for SDIO exynos: - Fix potential NULL pointer dereference in Exynos PMU driver. imx: - Fix vf610 SAI clock configuration bug which is discovered by the newly added master mode support in SAI audio driver. - Fix buggy L2 cache latency values in vf610 device trees, which may cause system hang when cpu runs at a higher frequency. ixp4xx: - fix prototypes for readl/writel functions ls2080a: - use little-endian register access for GPIO and SDHCI omap: - Fix clock source for ARM TWD and global timers on am437x - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when MACH_OMAP3_PANDORA is selected - Fix SPI DMA handles for dm816x as only some were mapped - Fix up mbox cells for dm816x to make mailbox usable pxa: - use PWM lookup table for all ezx machines s3c24xx: - Remove incorrect __init annotation from s3c24xx cpufreq driver structures. versatile: - fix PCI IRQ mapping on Versatile PB" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ls2080a/dts: Add little endian property for GPIO IP block dt-bindings: define little-endian property for QorIQ GPIO ARM64: dts: ls2080a: fix eSDHC endianness ARM: dts: vf610: use reset values for L2 cache latencies ARM: pxa: use PWM lookup table for all machines ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1 ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock ARM: dts: am4372: fix clock source for arm twd and global timers ARM: at91: fix pinctrl driver selection ARM: at91/dt: add always-on to 1.8V regulator ARM: dts: vf610: fix clock definition for SAI2 ARM: imx: clk-vf610: fix SAI clock tree ARM: ixp4xx: fix read{b,w,l} return types irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE ARM: dts: add dm816x missing spi DT dma handles ARM: dts: add dm816x missing #mbox-cells cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf
2015-12-12clk: rockchip: use rk3288-efuse clock idsZhengShunQian1-2/+2
Reference the newly added efuse clock-ids in the clock-tree. Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-12clk: rockchip: add clock controller for rk3228Jeffy Chen3-1/+689
Add the clock tree definition for the new rk3228 SoC. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-09clk: rockchip: allow more than 2 parents for cpuclkJeffy Chen1-2/+2
RK3228's armclk has 3 parents, so allow cpuclk to have more than 2 parents. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-09clk: sunxi: Add CLK_OF_DECLARE support for sun8i-a23-apb0-clk driverChen-Yu Tsai2-12/+69
The APBS clock on sun9i is the same as the APB0 clock on sun8i. With sun9i we are supporting the PRCM clocks by using CLK_OF_DECLARE, instead of through a PRCM mfd device and subdevices for each clock and reset control. As such we need a CLK_OF_DECLARE version of the sun8i-a23-apb0-clk driver. Also, build it for sun9i/A80, and not just for configurations with MFD_SUN6I_PRCM enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-08clk: shmobile: r8a7795: Add new CPG/MSSR driverGeert Uytterhoeven5-0/+392
Add a new R-Car H3 Clock Pulse Generator / Module Standby and Software Reset driver, using the new CPG/MSSR driver core. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-08clk: shmobile: Add new CPG/MSSR driver coreGeert Uytterhoeven2-0/+721
Add the common core for the new Renesas Clock Pulse Generator / Module Standby and Software Reset driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-08clk: shmobile: div6: Extract cpg_div6_register()Geert Uytterhoeven2-45/+94
Extract cpg_div6_register(), to allow registering div6 clocks from another clock driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-12-08clk: shmobile: div6: Make clock-output-names optionalGeert Uytterhoeven1-10/+3
Renesas DIV6 clocks provide a single clock output. Hence make the "clock-output-names" DT property optional instead of mandatory. In case the DT property is omitted the DT node name will be used. Rename the variable "name" to "clk_name" to make the code more similar with fixed-factor-clock.c, and to avoid a conflict with a nested local variable while we're at it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-08clk: shmobile: Rework CONFIG_ARCH_SHMOBILE_MULTIMagnus Damm1-12/+10
Shmobile is all multiplatform these days, so get rid of the reference to CONFIG_ARCH_SHMOBILE_MULTI in drivers/clk/shmobile/. Also instead of always enabling DIV6 and MSTP adjust the Makefile to enable DIV6 and MSTP depending on if they are included in the SoC or not. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-08clk: sunxi: Add VE (Video Engine) module clock driver for sun[457]iChen-Yu Tsai2-0/+172
The video engine has its own special module clock, consisting of a clock gate, configurable dividers, and a reset control. On later (sun[68]i) families, the reset control is moved out of this piece of hardware and grouped with reset controls of other peripherals. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-08clk: sunxi: Add H3 clocks supportJens Kuske3-0/+119
The H3 clock control unit is similar to the those of other sun8i family members like the A23. It adds a new bus gates clock similar to the simple gates, but with a different parent clock for each single gate. Some of the gates use the new AHB2 clock as parent, whose clock source is muxable between AHB1 and PLL6/2. The documentation isn't totally clear about which devices belong to AHB2 now, especially USB EHIC/OHIC, so it is mostly based on Allwinner kernel source code. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-07clk: sunxi: Add DRAM gates support for sun4i-a10Chen-Yu Tsai1-0/+12
The A10/A20 share the same set of DRAM clock gates, which controls direct memory access for some peripherals. On the A10, bit 15 controls the system's DRAM clock output (possibly to the DRAM chips), which we need to keep on. On the A20 this has been moved to the DRAM controller, becoming a no-op. However it is still listed in the user manual, so add it anyway. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-06clk: bcm: Add BCM63138 clock supportFlorian Fainelli3-0/+33
BCM63138 has a simple clocking domain which is primarily the ARMPLL clocking complex, from which the ARM (CPU), APB and AXI clocks would be derived from. Since the ARMPLL controller is entirely compatible with the iProc ARM PLL, we just initialize it without additional parameters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-12-03clk: ti: Add few dm814x clock aliasesTony Lindgren1-0/+4
The timer clock aliases are needed early on dm814x. Let's also add the aliases for the interconnects and MMC. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03clk: rockchip: fix rk3368 cpuclk divider offsetsHeiko Stuebner1-2/+2
Due to a copy-paste error the the rk3368 cpuclk settings were acessing rk3288-specific register offsets. This never caused problems till now, as cpu frequency scaling in't used currently at all. Reported-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-02Merge branch 'clk-fixes' into clk-nextStephen Boyd14-75/+53
* clk-fixes: clk: sunxi: pll2: Fix clock running too fast clk: scpi: add missing of_node_put clk: qoriq: fix memory leak imx/clk-pllv2: fix wrong do_div() usage imx/clk-pllv1: fix wrong do_div() usage clk: mmp: add linux/clk.h includes clk: ti: drop locking code from mux/divider drivers clk: ti816x: Add missing dmtimer clkdev entries clk: ti: fapll: fix wrong do_div() usage clk: ti: clkt_dpll: fix wrong do_div() usage clk: gpio: Get parent clk names in of_gpio_clk_setup()
2015-12-02clk: sunxi: pll2: Fix clock running too fastMaxime Ripard1-18/+5
Contrary to what the datasheet says, the pre divider doesn't seem to be incremented by one in the PLL2, but just uses the value from the register, with 0 being a bypass. This fixes the audio playing too fast. Since we now have the same pre-divider flags, and the only difference with the A10 is the post-divider offset, also remove the structure to just pass the offset as an argument. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Fixes: eb662f854710 ("clk: sunxi: pll2: Add A13 support") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-12-02clk: let of_clk_get_parent_name() fail for invalid clock-indicesMasahiro Yamada1-0/+3
Currently, of_clk_get_parent_name() returns a wrong parent clock name when "clock-indices" property exists and the target index is not found in the property. In this case, NULL should be returned. For example, oscillator { compatible = "myclocktype"; #clock-cells = <1>; clock-indices = <1>, <3>; clock-output-names = "clka", "clkb"; }; consumer { compatible = "myclockconsumer"; clocks = <&oscillator 0>, <&oscillator 1>; }; Currently, of_clk_get_parent_name(consumer_np, 0) returns "clka" (and of_clk_get_parent_name(consumer_np, 1) also returns "clka", this is correct). Because the "clock-indices" in the clock parent does not contain <0>, of_clk_get_parent_name(consumer_np, 0) should return NULL. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-12-02clk: rockchip: protect rk3368 aclk_bus and aclk_peri clocksJianqun xu1-0/+2
Add aclk_bus and aclk_peri to the list of rk3368 critical clocks, which are the base clocks that supply for all peripherals, never to be disabled automatically. Signed-off-by: Jianqun xu <jay.xu@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-02clk: imx5: ipu_di_sel clocks can set parent ratesPatrick Brünn1-4/+4
To obtain exact pixel clocks, allow the DI clock selectors to influence the PLLs that they are derived from. Commit 4591b13289b5 ("ARM: i.MX6: ipu_di_sel clocks can set parent rates") did this for i.MX6. Port it to enable high display resolutions on i.MX53 based platforms such as CX9020 Embedded PC, too. Signed-off-by: Patrick Brünn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-02clk: imx: Replace clk error check with imx_check_clocks()Bai Ping2-7/+2
As we already have a 'imx_check_clocks' to do the clock error check, so cleanup the error check code. Signed-off-by: Bai Ping <b51503@freescale.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-02clk: imx: Add a virtual arm clk on i.mx7dBai Ping1-0/+6
Add a virtual arm clk to abstract the actual steps when changing the ARM core frequency.So we can using the 'cpufreq-dt' driver on i.MX7D/Solo. Signed-off-by: Bai Ping <b51503@freescale.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-02ARM: imx: clk-vf610: fix SAI clock treeStefan Agner1-4/+4
The Synchronous Audio Interface (SAI) instances are clocked by independent clocks: The bus clock and the audio clock (as shown in Figure 51-1 in the Vybrid Reference Manual). The clock gates in CCGR0/CCGR1 for SAI0 through SAI3 are bus clock gates, as access tests to the registers with/without gating those clocks have shown. The audio clock is gated by the SAIx_EN gates in CCM_CSCDR1, followed by a clock divider (SAIx_DIV). Currently, the parent of the bus clock gates has been assigned to SAIx_DIV, which is not involved in the bus clock path for the SAI instances (see chapter 9.10.12, SAI clocking in the Vybrid Reference Manual). Fix this by define the parent clock of VF610_CLK_SAIx to be the bus clock. If the driver needs the audio clock (when used in master mode), a fixed device tree is required which assign the audio clock properly to VF610_CLK_SAIx_DIV. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-02clk: rockchip: Force rk3368 PWM clock (and its parents) onCaesar Wang1-0/+5
Most rk3368 boards (especially those with Pmic that followed the lead from rk3368-evb-act8846) have a PWM regulator on them for vdd_logic. This is the main voltage for all kinds of misc stuff including the memory controller. On these boards it is critically important to make sure that the PWM never ever glitches and never loses its clock. Any glitch could crash the system. Right now there are no users of the PWM regulator and also Linux thinks that the PWM regulator is disabled. Things happen to work because firmware configured the PWM and Linux doesn't touch it. ..and the PWM's clock is marked as "ignore unused". ...but things _stop_ working if we turn off serial console. Why? Because: 1. Serial console shares a parent clock with the PWM (pclk_cpu) 2. If we have no serial console then nobody is holding pclk_cpu on at reboot time. It gets disabled. We need to fix a lot of the above problems, but until we get everything right the cleanest "hack" seems like it is to just keep the "rk_pwm" clock on always. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-01ARM: pxa: make more mach/*.h files localArnd Bergmann1-1/+0
Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01clk: mmp: stop using platform headersArnd Bergmann3-19/+19
The mmp clock drivers currently hardcode the physical addresses for the clock registers. This is generally a bad idea, and it also gets in the way of multiplatform builds, which make the platform header files inaccessible to device drivers. To work around the header file problem, this patch changes the calling convention so the three mmp clock drivers get initialized with the base addresses as arguments from the platform code. It would still be useful to have a larger rework of the clock drivers, with DT integration to let the clocks actually be probed automatically, and the base addresses passed as DT properties. I am unsure if anyone is still interested in the mmp platform, so it is possible that this won't happen. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
2015-12-01clk: rockchip: switch PLLs to slow mode before reboot for rk3288Chris Zhong1-18/+14
We've been seeing some crashes at reboot test on rk3288-based systems, which boards have not reset pin connected to NPOR, they reboot by setting 0xfdb9 to RK3288_GLB_SRST_FST register. If the APLL works in a high frequency mode, some IPs might hang during soft reset. It appears that we can fix the problem by switching to slow mode before reboot, just like what we did before suspend. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-01clk: sunxi: Add sun9i A80 cpus (cpu special) clock supportChen-Yu Tsai2-0/+242
The "cpus" clock is the clock for the embedded processor in the A80. It is also part of the PRCM clock tree. This clock includes a pre- divider on one of its inputs. For now we are using a custom clock driver for it. In the future we may want to develop a generalized driver for these types of clocks, which also includes the AHB clock driver on sun[5678]i. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Powered by cgit, Gruvboxed by Blaster4385.