aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk/rockchip/clk-rk3188.c
AgeCommit message (Collapse)AuthorFilesLines
2014-12-28clk: rockchip: fix rk3066 pll lock bit locationHeiko Stuebner1-2/+13
The bit locations indicating the locking status of the plls on rk3066 are shifted by one to the right when compared to the rk3188, bits [7:4] instead of [8:5] on the rk3188, thus indicating the locking state of the wrong pll or a completely different information in case of the gpll. The recently introduced pll init code exposed that problem on some rk3066 boards when it tried to bring the boot-pll value in line with the value from the rate table. Fix this by defining separate pll definitions for rk3066 with the correct locking indices. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Fixes: 2c14736c75db ("clk: rockchip: add clock driver for rk3188 and rk3066 clocks") Tested-by: FUKAUMI Naoki <naobsd@gmail.com> Cc: stable@vger.kernel.org
2014-12-21clk: rockchip: Fix clock gate for rk3188 hclk_emem_periRomain Perier1-1/+1
Do not disable clock gate "hclk_emem_peri", otherwise EMAC clocks no longer work and it breaks ethernet on RK3066 and RK3188. It fixes a regression introduced by commit 78eaf6095cc7 ("clk: rockchip: disable unused clocks"). Signed-off-by: Romain Perier <romain.perier@gmail.com> Fixes: 78eaf6095cc7 ("clk: rockchip: disable unused clocks") Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-12-21clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB HostJulien CHAUVEAU1-4/+6
This patch adds CLK_IGNORE_UNUSED flag to hclk_usb_peri, hclk_usbotg0 and hclk_usbotg1 because these clocks must remain enabled to use the USB controllers in host mode. This fixes a regression introduced by commit 78eaf6095cc7 ("clk: rockchip: disable unused clocks"). Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr> Fixes: 78eaf6095cc7 ("clk: rockchip: disable unused clocks") Reviewed-by: Romain Perier <romain.perier@gmail.com> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-25clk: rockchip: add ROCKCHIP_PLL_SYNC_RATE flag to some pllsHeiko Stuebner1-2/+2
Add the new flag to gpll and cpll on rk3188 and similar and to gpll, cpll and npll on rk3288. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-25clk: rockchip: add ability to specify pll-specific flagsHeiko Stuebner1-4/+4
This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-23clk: rockchip: fix rk3188 USB HSIC PHY clock dividerJulien CHAUVEAU1-1/+1
The USB HSIC PHY clock divider is set in the register RK2928_CLKSEL_CON(11). Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-23clk: rockchip: fix clock gate for rk3188 spdif_preJulien CHAUVEAU1-16/+9
In rk3188 clock branches, spdif_pre gate was set to RK2928_CLKGATE_CON(13) bit 13. This appears to be a copy-paste error because such a register does not exist. We correct it to RK2928_CLKGATE_CON(0) and find out that the rk3188 spdif clock is the same as the rk3066 spdif clock, so we move it to the common clock branches. Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-18clk: rockchip: fix parent clock for rk3188 hclk_lcdc1Julien CHAUVEAU1-1/+1
The parent clock for hclk_lcdc1 was set to aclk_cpu instead of hclk_cpu. Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-07clk: rockchip: fix rk3188 hsadc_frac definitionHeiko Stübner1-2/+2
The arguments to COMPOSITE_FRAC for hsadc_frac were mangled, leaving out the the general clock flags argument. This results in strange effects, as only sometimes a zero-division is reported as the wrong register is read. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-04clk: rockchip: disable unused clocksKever Yang1-19/+19
The rockchip clock driver use CLK_IGNORE_UNUSED flag to make sure all the clocks are available like default power on state. We have implement the clock manage in most of rockchip drivers, it is time to remove it for power save. Instead we add CLK_IGNORE_UNUSED for some clock nodes which should be on during boot or no module driver in kernel will initialize it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-10-01clk: rockchip: add restart handlerHeiko Stübner1-0/+2
Add infrastructure to write the correct value to the restart register and register the restart notifier for both rk3188 (including rk3066) and rk3288. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-09-27clk: rockchip: switch to using the new cpuclk type for armclkHeiko Stuebner1-4/+100
This adds the necessary soc-specific divider values and switches the armclk to use the newly introduced cpuclk type. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: make tightly bound armclk child-clocks read-onlyHeiko Stuebner1-8/+18
Rockchip SoCs contain clocks tightly bound to the armclk, where the best rate / divider is supplied by the vendor after careful measuring. Often this ideal rate may be greater than the current rate. Therefore prevent the ccf from trying to set these dividers itself by setting them to read-only. In the case of the rk3066, this also includes the aclk_cpu, which makes it necessary to also split its direct child-clocks (pclk_cpu, hclk_cpu, ...) into individual definitions for rk3066 and rk3188. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-27clk: rockchip: reparent aclk_cpu_pre to the gpllHeiko Stuebner1-0/+21
aclk_cpu_pre on the rk3188 can either be sourced from the armclk or the gpll. To reduce complexity on apll changes caused by cpufreq, reparent it always to the gpll source. If really necessary it could be reparented back on a per board level using the assigned-clocks mechanism. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-27clk: rockchip: fix rk3066 pll status register locationHeiko Stuebner1-3/+7
The register providing the pll lock status is at a different address on the rk3066. The error became apparent while working on cpufreq support for the rockchip SoCs. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-10clk: rockchip: also protect hclk_peri as criticalHeiko Stübner1-0/+1
The dwc2 usb controller also uses agressive clock gating, which in this case leads to hclk_peri getting disabled and hanging the system. Therefore move it to the critical clocks until we also control that part of the system. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02clk: rockchip: protect critical clocks from getting disabledHeiko Stübner1-0/+7
The clock-tree contains clocks that should never get disabled automatically. One example are the base ACLKs, the base supplies for all peripherals. Therefore add a structure similar to the sunxi clock-tree to protect these special clocks from being disabled. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-13clk: rockchip: add clock driver for rk3188 and rk3066 clocksHeiko Stübner1-0/+672
This adds a clock driver that handles the specific muxes, dividers and gates of rk3188 and rk3066 SoCs. The structure of the clock list resembles the arrangement of their counterparts in the clock architecture diagrams found in the SoC documentation. Clocks exported to the clock provider are currently limited to well known or measured ones. So additional clock exports may be necessary in the future. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
Powered by cgit, Gruvboxed by Blaster4385.