| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some platforms may desire to pass the event log up to Linux in the
form of a reserved memory region. In particular, this is desirable
for embedded systems or baseboard management controllers (BMCs)
booting with U-Boot. IBM OpenBMC BMCs will be the first user.
Add support for the reserved memory in the TPM core to find the
region and map it.
Signed-off-by: Eddie James <[email protected]>
[jarkko: removed spurious dev_info()'s from tpm_read_log_memory_region()]
Reviewed-by: Jarkko Sakkinen <[email protected]>
[yang: return -ENOMEM when devm_memremap() fails]
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
Since the bios event log is freed in the device release function,
let devres handle the deallocation. This will allow other memory
allocation/mapping functions to be used for the bios event log.
Signed-off-by: Eddie James <[email protected]>
Tested-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
Pluton is an integrated security processor present in some recent Ryzen
parts. If it's enabled, it presents two devices - an MSFT0101 ACPI device
that's broadly an implementation of a Command Response Buffer TPM2, and an
MSFT0200 ACPI device whose functionality I haven't examined in detail yet.
This patch only attempts to add support for the TPM device.
There's a few things that need to be handled here. The first is that the
TPM2 ACPI table uses a previously undefined start method identifier. The
table format appears to include 16 bytes of startup data, which corresponds
to one 64-bit address for a start message and one 64-bit address for a
completion response. The second is that the ACPI tables on the Thinkpad Z13
I'm testing this on don't define any memory windows in _CRS (or, more
accurately, there are two empty memory windows). This check doesn't seem
strictly necessary, so I've skipped that.
Finally, it seems like chip needs to be explicitly asked to transition into
ready status on every command. Failing to do this means that if two
commands are sent in succession without an idle/ready transition in
between, everything will appear to work fine but the response is simply the
original command. I'm working without any docs here, so I'm not sure if
this is actually the required behaviour or if I'm missing something
somewhere else, but doing this results in the chip working reliably.
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Matthew Garrett <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
'This should be 'retry_time_ms' instead of 'max_retries'.
Fixes: 63c4eb347164 ("ipmi:ipmb: Add initial support for IPMI over IPMB")
Signed-off-by: Christophe JAILLET <[email protected]>
Message-Id: <0d8670cff2c656e99a832a249e77dc90578f67de.1675591429.git.christophe.jaillet@wanadoo.fr>
Cc: [email protected]
Signed-off-by: Corey Minyard <[email protected]>
|
|
The IPMI spec has a time (T6) specified between request retries. Add
the handling for that.
Reported by: Tony Camuso <[email protected]>
Cc: [email protected]
Signed-off-by: Corey Minyard <[email protected]>
|
|
It was cruft left over from older handling of run to completion.
Cc: [email protected]
Signed-off-by: Corey Minyard <[email protected]>
|
|
Rename the SSIF_IDLE() to IS_SSIF_IDLE(), since that is more clear, and
rename SSIF_NORMAL to SSIF_IDLE, since that's more accurate.
Cc: [email protected]
Signed-off-by: Corey Minyard <[email protected]>
|
|
The resend_msg() function cannot fail, but there was error handling
around using it. Rework the handling of the error, and fix the out of
retries debug reporting that was wrong around this, too.
Cc: [email protected]
Signed-off-by: Corey Minyard <[email protected]>
|
|
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[[email protected]: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Acked-by: Mike Rapoport (IBM) <[email protected]>
Acked-by: Sebastian Reichel <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Reviewed-by: Hyeonggon Yoo <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjun Roy <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Howells <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Greg Thelen <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Laurent Dufour <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Oskolkov <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Punit Agrawal <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Soheil Hassas Yeganeh <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Enable compile testing for jh7110. Also remove the dependency on
HW_RANDOM.
Signed-off-by: Herbert Xu <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Jia Jie Ho <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
This adds driver support for the hardware random number generator in
Starfive SoCs and adds StarFive TRNG entry to MAINTAINERS.
Co-developed-by: Jenny Zhang <[email protected]>
Signed-off-by: Jenny Zhang <[email protected]>
Signed-off-by: Jia Jie Ho <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.
Signed-off-by: Bo Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in applicom_init() with 'dev' not NULL, we need to
call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xiongfeng Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
set_protocol"
This reverts commit be826ada52f1fcabed5b5217c94609ebf5967211.
The function monitor_card() is a timer handler that runs in an
atomic context, but it calls usleep_range() that can sleep.
As a result, the sleep-in-atomic-context bugs will happen.
The process is shown below:
(atomic context)
monitor_card()
set_protocol()
usleep_range() //sleep
The origin commit c1986ee9bea3 ("[PATCH] New Omnikey Cardman
4000 driver") works fine.
Fixes: be826ada52f1 ("char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol")
Signed-off-by: Duoming Zhou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove all kernel-doc "/**" markers; just use "/*" comments since
these are not in kernel-doc format.
This eliminates 11 kernel-doc warnings:
drivers/char/pcmcia/synclink_cs.c:487: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* line discipline callback wrappers
drivers/char/pcmcia/synclink_cs.c:3861: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
drivers/char/pcmcia/synclink_cs.c:3914: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by generic HDLC layer to send frame
drivers/char/pcmcia/synclink_cs.c:3959: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by network layer when interface enabled
drivers/char/pcmcia/synclink_cs.c:4022: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by network layer when interface is disabled
drivers/char/pcmcia/synclink_cs.c:4053: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by network layer to process IOCTL call to network device
drivers/char/pcmcia/synclink_cs.c:4156: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by network layer when transmit timeout is detected
drivers/char/pcmcia/synclink_cs.c:4179: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by device driver when transmit completes
drivers/char/pcmcia/synclink_cs.c:4191: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by device driver when frame received
drivers/char/pcmcia/synclink_cs.c:4231: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by device driver when adding device instance
drivers/char/pcmcia/synclink_cs.c:4279: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* called by device driver when removing device instance
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Dominik Brodowski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Convert various parameter names for ->dtr_rts() and related functions
from onoff, on, and raise to active.
Reviewed-by: Jiri Slaby <[email protected]>
Acked-by: Ulf Hansson <[email protected]> # For MMC
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Convert the raise/on parameter in ->dtr_rts() to bool through the
callchain. The parameter is used like bool. In USB serial, there
remains a few implicit bool -> larger type conversions because some
devices use u8 in their control messages.
In moxa_tiocmget(), dtr variable was reused for line status which
requires int so use a separate variable for status.
Reviewed-by: Jiri Slaby <[email protected]>
Acked-by: Ulf Hansson <[email protected]> # For MMC
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Return boolean from ->carrier_raised() instead of 0 and 1. Make the
return type change also to tty_port_carrier_raised() that makes the
->carrier_raised() call (+ cd variable in moxa into which its return
value is stored).
Also cleans up a few unnecessary constructs related to this change:
return xx ? 1 : 0;
-> return xx;
if (xx)
return 1;
return 0;
-> return xx;
Reviewed-by: Jiri Slaby <[email protected]>
Acked-by: Ulf Hansson <[email protected]> # For MMC
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Make callers pass true/false consistently for bool val.
Reviewed-by: Samuel Iglesias Gonsalvez <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
is_nommu_shared_mapping()
Patch series "mm/nommu: don't use VM_MAYSHARE for MAP_PRIVATE mappings".
Trying to reduce the confusion around VM_SHARED and VM_MAYSHARE first
requires !CONFIG_MMU to stop using VM_MAYSHARE for MAP_PRIVATE mappings.
CONFIG_MMU only sets VM_MAYSHARE for MAP_SHARED mappings.
This paves the way for further VM_MAYSHARE and VM_SHARED cleanups: for
example, renaming VM_MAYSHARED to VM_MAP_SHARED to make it cleaner what is
actually means.
Let's first get the weird case out of the way and not use VM_MAYSHARE in
MAP_PRIVATE mappings, using a new VM_MAYOVERLAY flag instead.
This patch (of 3):
We want to stop using VM_MAYSHARE in private mappings to pave the way for
clarifying the semantics of VM_MAYSHARE vs. VM_SHARED and reduce the
confusion. While CONFIG_MMU uses VM_MAYSHARE to represent MAP_SHARED,
!CONFIG_MMU also sets VM_MAYSHARE for selected R/O private file mappings
that are an effective overlay of a file mapping.
Let's factor out all relevant VM_MAYSHARE checks in !CONFIG_MMU code into
is_nommu_shared_mapping() first.
Note that whenever VM_SHARED is set, VM_MAYSHARE must be set as well
(unless there is a serious BUG). So there is not need to test for
VM_SHARED manually.
No functional change intended.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Nicolas Pitre <[email protected]>
Cc: Pavel Begunkov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two cleanup patches
- a fix of a memory leak in the Xen pvfront driver
- a fix of a locking issue in the Xen hypervisor console driver
* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: free active map buffer on pvcalls_front_free_map
hvc/xen: lock console list traversal
x86/xen: Remove the unused function p2m_index()
xen: make remove callback of xen driver void returned
|
|
TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:
tpm tpm0: A TPM error (28) occurred continue selftest
...
tpm tpm0: A TPM error (28) occurred attempting get random
...
tpm tpm0: Error (28) sending savestate before suspend
tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
tpm_tis 00:08: PM: failed to suspend: error 28
PM: Some devices failed to suspend, or early wake event detected
This issue was partially fixed by 23393c646142 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.
In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: [email protected] # 6.1+
Reported-by: Vlastimil Babka <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Acked-by: Luigi Semenzato <[email protected]>
Cc: Peter Huewe <[email protected]>
Cc: Jarkko Sakkinen <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Johannes Altmanninger <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.
Cc: Michael Ellerman <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
|
|
Since commit fc7a6209d571 ("bus: Make remove callback return void")
forces bus_type::remove be void-returned, it doesn't make much sense for
any bus based driver implementing remove callbalk to return non-void to
its caller.
This change is for xen bus based drivers.
Acked-by: Juergen Gross <[email protected]>
Signed-off-by: Dawei Li <[email protected]>
Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Juergen Gross <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Optimise away self-test overhead when they are disabled
- Support symmetric encryption via keyring keys in af_alg
- Flip hwrng default_quality, the default is now maximum entropy
Algorithms:
- Add library version of aesgcm
- CFI fixes for assembly code
- Add arm/arm64 accelerated versions of sm3/sm4
Drivers:
- Remove assumption on arm64 that kmalloc is DMA-aligned
- Fix selftest failures in rockchip
- Add support for RK3328/RK3399 in rockchip
- Add deflate support in qat
- Merge ux500 into stm32
- Add support for TEE for PCI ID 0x14CA in ccp
- Add mt7986 support in mtk
- Add MaxLinear platform support in inside-secure
- Add NPCM8XX support in npcm"
* tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
crypto: ux500/cryp - delete driver
crypto: stm32/cryp - enable for use with Ux500
crypto: stm32 - enable drivers to be used on Ux500
dt-bindings: crypto: Let STM32 define Ux500 CRYP
hwrng: geode - Fix PCI device refcount leak
hwrng: amd - Fix PCI device refcount leak
crypto: qce - Set DMA alignment explicitly
crypto: octeontx2 - Set DMA alignment explicitly
crypto: octeontx - Set DMA alignment explicitly
crypto: keembay - Set DMA alignment explicitly
crypto: safexcel - Set DMA alignment explicitly
crypto: hisilicon/hpre - Set DMA alignment explicitly
crypto: chelsio - Set DMA alignment explicitly
crypto: ccree - Set DMA alignment explicitly
crypto: ccp - Set DMA alignment explicitly
crypto: cavium - Set DMA alignment explicitly
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
crypto: arm64/ghash-ce - use frame_push/pop macros consistently
crypto: arm64/crct10dif - use frame_push/pop macros consistently
crypto: arm64/aes-modes - use frame_push/pop macros consistently
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
make more things static.
- Make portdrv bind to Switch Ports that have AER. Previously, if
these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
the Ports couldn't be suspended to low-power states. AER on these
Ports doesn't use interrupts, and the AER driver doesn't need to
claim them.
- Assign PCI domain IDs using ida_alloc(), which makes host bridge
add/remove work better.
Resource management:
- To work better with recent BIOSes that use EfiMemoryMappedIO for
PCI host bridge apertures, remove those regions from the E820 map
(E820 entries normally prevent us from allocating BARs). In v5.19,
we added some quirks to disable E820 checking, but that's not very
maintainable. EfiMemoryMappedIO means the OS needs to map the
region for use by EFI runtime services; it shouldn't prevent OS
from using it.
PCIe native device hotplug:
- Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
PCIe tunneling depends on native PCIe hotplug.
- Enable Command Completed Interrupt only if supported to avoid user
confusion from lspci output that says this is enabled but not
supported.
- Prevent pciehp from binding to Switch Upstream Ports; this happened
because of interaction with acpiphp and caused devices below the
Upstream Port to disappear.
Power management:
- Convert AGP drivers to generic power management. We hope to remove
legacy power management from the PCI core eventually.
Virtualization:
- Fix pci_device_is_present(), which previously always returned
"false" for VFs, causing virtio hangs when unbinding the driver.
Miscellaneous:
- Convert drivers to gpiod API to prepare for dropping some legacy
code.
- Fix DOE fencepost error for the maximum data object length.
Baikal-T1 PCIe controller driver:
- Add driver and DT bindings.
Broadcom STB PCIe controller driver:
- Enable Multi-MSI.
- Delay 100ms after PERST# deassert to allow power and clocks to
stabilize.
- Configure Read Completion Boundary to 64 bytes.
Freescale i.MX6 PCIe controller driver:
- Initialize PHY before deasserting core reset to fix a regression in
v6.0 on boards where the PHY provides the reference.
- Fix imx6sx and imx8mq clock names in DT schema.
Intel VMD host bridge driver:
- Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
SSDs in VT-d pass-through scenarios.
- Disable MSI remapping, which gets re-enabled by firmware during
suspend/resume.
MediaTek PCIe Gen3 controller driver:
- Add MT7986 and MT8195 support.
Qualcomm PCIe controller driver:
- Add SC8280XP/SA8540P basic interconnect support.
Rockchip DesignWare PCIe controller driver:
- Base DT schema on common Synopsys schema.
Synopsys DesignWare PCIe core:
- Collect DT items shared between Root Port and Endpoint (PERST GPIO,
PHY info, clocks, resets, link speed, number of lanes, number of
iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.
- Add dma-ranges support for Root Ports and Endpoints.
- Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
reduce code duplication.
- Add generic names for clocks and resets to encourage more
consistent naming across drivers using DesignWare IP.
- Stop advertising PTM Responder role for Endpoints, which aren't
allowed to be responders.
TI J721E PCIe driver:
- Add j721s2 host mode ID to DT schema.
- Add interrupt properties to DT schema.
Toshiba Visconti PCIe controller driver:
- Fix interrupts array max constraints in DT schema"
* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
x86/PCI: Use pr_info() when possible
x86/PCI: Fix log message typo
x86/PCI: Tidy E820 removal messages
PCI: Skip allocate_resource() if too little space available
efi/x86: Remove EfiMemoryMappedIO from E820 map
PCI/portdrv: Allow AER service only for Root Ports & RCECs
PCI: xilinx-nwl: Fix coding style violations
PCI: mvebu: Switch to using gpiod API
PCI: pciehp: Enable Command Completed Interrupt only if supported
PCI: aardvark: Switch to using devm_gpiod_get_optional()
dt-bindings: PCI: mediatek-gen3: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: qcom: Allow 'dma-coherent' property
PCI: mt7621: Add sentinel to quirks table
PCI: vmd: Fix secondary bus reset for Intel bridges
PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
...
|
|
Pull IPMI updates from Corey Minyard:
"This includes a number of small fixes, as usual.
It also includes a new driver for doing the i2c (SSIF) interface
BMC-side, pretty much completing the BMC side interfaces"
* tag 'for-linus-6.2-1' of https://github.com/cminyard/linux-ipmi:
ipmi/watchdog: use strscpy() to instead of strncpy()
ipmi: ssif_bmc: Convert to i2c's .probe_new()
ipmi: fix use after free in _ipmi_destroy_user()
ipmi/watchdog: Include <linux/kstrtox.h> when appropriate
ipmi:ssif: Increase the message retry time
ipmi: Fix some kernel-doc warnings
ipmi: ssif_bmc: Use EPOLLIN instead of POLLIN
ipmi: fix msg stack when IPMI is disconnected
ipmi: fix memleak when unload ipmi driver
ipmi: fix long wait in unload when IPMI disconnect
ipmi: kcs: Poll OBF briefly to reduce OBE latency
bindings: ipmi: Add binding for SSIF BMC driver
ipmi: ssif_bmc: Add SSIF BMC driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
|
|
Merge ACPI changes related to device enumeration, device object
managenet, operation region handling, table parsing and sysfs
interface:
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
* acpi-scan:
ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0)
* acpi-bus:
ACPI: FFH: Silence missing prototype warnings
ACPI: make remove callback of ACPI driver void
ACPI: bus: Fix the _OSC capability check for FFH OpRegion
arm64: Add architecture specific ACPI FFH Opregion callbacks
ACPI: Implement a generic FFH Opregion handler
* acpi-tables:
ACPI: tables: Fix the stale comments for acpi_locate_initial_tables()
ACPI: tables: Print CORE_PIC information when MADT is parsed
* acpi-sysfs:
ACPI: sysfs: use sysfs_emit() to instead of scnprintf()
ACPI: sysfs: Use kstrtobool() instead of strtobool()
|
|
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. We add a new struct
'amd_geode_priv' to record pointer of the pci_dev and membase, and then
add missing pci_dev_put() for the normal and error path.
Fixes: ef5d862734b8 ("[PATCH] Add Geode HW RNG driver")
Signed-off-by: Xiongfeng Wang <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the normal and error path.
Fixes: 96d63c0297cc ("[PATCH] Add AMD HW RNG driver")
Signed-off-by: Xiongfeng Wang <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Remove tests for SPI device or I2C client to be non-NULL because
driver core will never call driver's probe method without having
a valid device structure.
Signed-off-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The error message in __crb_relinquish_locality() mentions requestAccess
instead of Relinquish. Fix it.
Fixes: 888d867df441 ("tpm: cmd_ready command can be issued only after granting locality")
Signed-off-by: Michael Kelley <[email protected]>
Acked-by: Tomas Winkler <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The ftpm_mod_init() returns the driver_register() directly without checking
its return value, if driver_register() failed, the ftpm_tee_plat_driver is
not unregistered.
Fix by unregister ftpm_tee_plat_driver when driver_register() failed.
Fixes: 9f1944c23c8c ("tpm_ftpm_tee: register driver on TEE bus")
Signed-off-by: Yuan Can <[email protected]>
Reviewed-by: Maxim Uvarov <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
In check_acpi_tpm2(), we get the TPM2 table just to make
sure the table is there, not used after the init, so the
acpi_put_table() should be added to release the ACPI memory.
Fixes: 4cb586a188d4 ("tpm_tis: Consolidate the platform and acpi probe flow")
Cc: [email protected]
Signed-off-by: Hanjun Guo <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
In crb_acpi_add(), we get the TPM2 table to retrieve information
like start method, and then assign them to the priv data, so the
TPM2 table is not used after the init, should be freed, call
acpi_put_table() to fix the memory leak.
Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface")
Cc: [email protected]
Signed-off-by: Hanjun Guo <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The start and length of the event log area are obtained from
TPM2 or TCPA table, so we call acpi_get_table() to get the
ACPI information, but the acpi_get_table() should be coupled with
acpi_put_table() to release the ACPI memory, add the acpi_put_table()
properly to fix the memory leak.
While we are at it, remove the redundant empty line at the
end of the tpm_read_log_acpi().
Fixes: 0bfb23746052 ("tpm: Move eventlog files to a subdirectory")
Fixes: 85467f63a05c ("tpm: Add support for event log pointer found in TPM2 ACPI table")
Cc: [email protected]
Signed-off-by: Hanjun Guo <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The check for cancelled request depends on the VID of the chip, but
some chips share VID which shouldn't share their cancellation
behavior. This is the case for the Nuvoton NPCT75X, which should use
the default cancellation check, not the Winbond one.
To avoid changing the existing behavior, add a new flag to indicate
that the chip should use the default cancellation check and set it
for the I2C TPM2 TIS driver.
Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <[email protected]>
Tested-by: Joel Stanley <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The sanity check mask for TPM_INT_ENABLE register was off by 8 bits,
resulting in failure to probe if the TPM_INT_ENABLE register was a
valid value.
Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Tested-by: Joel Stanley <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The TPM code registers put_device() as a devm cleanup handler, and casts
the reference to the right function pointer type for this to be
permitted by the compiler.
However, under kCFI, this is rejected at runtime, resulting in a splat
like
CFI failure at devm_action_release+0x24/0x3c (target: put_device+0x0/0x24; expected type: 0xa488ebfc)
Internal error: Oops - CFI: 0000000000000000 [#1] PREEMPT SMP
Modules linked in: ...
CPU: 20 PID: 454 Comm: systemd-udevd Not tainted 6.1.0-rc1+ #51
Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Oct 3 2022
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : devm_action_release+0x24/0x3c
lr : devres_release_all+0xb4/0x114
sp : ffff800009bb3630
x29: ffff800009bb3630 x28: 0000000000000000 x27: 0000000000000011
x26: ffffaa6f9922c0c8 x25: 0000000000000002 x24: 000000000000000f
x23: ffff800009bb3648 x22: ffff7aefc3be2100 x21: ffff7aefc3be2e00
x20: 0000000000000005 x19: ffff7aefc1e1ec10 x18: ffff800009af70a8
x17: 00000000a488ebfc x16: 0000000094ee7df3 x15: 0000000000000000
x14: 4075c5c2ef7affff x13: e46a91c5c5e2ef42 x12: ffff7aefc2c57540
x11: 0000000000000001 x10: 0000000000000001 x9 : 0000000100000000
x8 : ffffaa6fa09b39b4 x7 : 7f7f7f7f7f7f7f7f x6 : 8000000000000000
x5 : 000000008020000e x4 : ffff7aefc2c57500 x3 : ffff800009bb3648
x2 : ffff800009bb3648 x1 : ffff7aefc3be2e80 x0 : ffff7aefc3bb7000
Call trace:
devm_action_release+0x24/0x3c
devres_release_all+0xb4/0x114
really_probe+0xb0/0x49c
__driver_probe_device+0x114/0x180
driver_probe_device+0x48/0x1ec
__driver_attach+0x118/0x284
bus_for_each_dev+0x94/0xe4
driver_attach+0x24/0x34
bus_add_driver+0x10c/0x220
driver_register+0x78/0x118
__platform_driver_register+0x24/0x34
init_module+0x20/0xfe4 [tpm_tis_synquacer]
do_one_initcall+0xd4/0x248
do_init_module+0x44/0x28c
load_module+0x16b4/0x1920
Fix this by going through a helper function of the correct type.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|