| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
zram_compress does several things, compress, entry alloc and check
limitation. I did for just readbility but it hurts modulization.:(
So this patch removes zram_compress functions and inline it in
__zram_bvec_write for upcoming patches.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Minchan Kim <[email protected]>
Cc: Juneho Choi <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "writeback incompressible pages to storage", v1.
zRam is useful for memory saving with compressible pages but sometime,
workload can be changed and system has lots of incompressible pages
which is very harmful for zram.
This patch supports writeback feature of zram so admin can set up a
block device and with it, zram can save the memory via writing out the
incompressile pages once it found it's incompressible pages (1/4 comp
ratio) instead of keeping the page in memory.
[1-3] is just clean up and [4-8] is step by step feature enablement.
[4-8] is logically not bisectable(ie, logical unit separation)
although I tried to compiled out without breaking but I think it would
be better to review.
This patch (of 9):
__zram_bvec_write has some of duplicated logic for zram meta data
handling of same_page|compressed_page. This patch aims to clean it up
without behavior change.
[[email protected]: fix compr_data_size stat]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Minchan Kim <[email protected]>
Signed-off-by: Yisheng Xie <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Cc: Juneho Choi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
drivers/block/rbd.c: In function 'rbd_acquire_lock':
drivers/block/rbd.c:3602:44: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Silence the warning, found it when built old kernel(3.10) with
OBS(opensuse build service).
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
Commit 6c6b6f28b333 ("loop: set physical block size to PAGE_SIZE")
caused mkfs.xfs to barf on ppc64 [1]. Always using PAGE_SIZE as the
physical block size still makes the most sense semantically, but let's
just lie and always set it to the same value as the logical block size
(same goes for io_min). In the future we might want to at least bump up
io_min to PAGE_SIZE but I'm sick of these stupid changes so let's play
it safe.
1: https://marc.info/?l=linux-xfs&m=150459024723753&w=2
Tested-by: Chandan Rajendra <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Add 'cross-release' support to lockdep, which allows APIs like
completions, where it's not the 'owner' who releases the lock, to be
tracked. It's all activated automatically under
CONFIG_PROVE_LOCKING=y.
- Clean up (restructure) the x86 atomics op implementation to be more
readable, in preparation of KASAN annotations. (Dmitry Vyukov)
- Fix static keys (Paolo Bonzini)
- Add killable versions of down_read() et al (Kirill Tkhai)
- Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)
- Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)
- Remove smp_mb__before_spinlock() and convert its usages, introduce
smp_mb__after_spinlock() (Peter Zijlstra)
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
locking/lockdep/selftests: Fix mixed read-write ABBA tests
sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
smp: Avoid using two cache lines for struct call_single_data
locking/lockdep: Untangle xhlock history save/restore from task independence
locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
futex: Remove duplicated code and fix undefined behaviour
Documentation/locking/atomic: Finish the document...
locking/lockdep: Fix workqueue crossrelease annotation
workqueue/lockdep: 'Fix' flush_work() annotation
locking/lockdep/selftests: Add mixed read-write ABBA tests
mm, locking/barriers: Clarify tlb_flush_pending() barriers
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
locking/lockdep: Explicitly initialize wq_barrier::done::map
locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
locking/refcounts, x86/asm: Implement fast refcount overflow protection
locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
- Introduce the ORC unwinder, which can be enabled via
CONFIG_ORC_UNWINDER=y.
The ORC unwinder is a lightweight, Linux kernel specific debuginfo
implementation, which aims to be DWARF done right for unwinding.
Objtool is used to generate the ORC unwinder tables during build, so
the data format is flexible and kernel internal: there's no
dependency on debuginfo created by an external toolchain.
The ORC unwinder is almost two orders of magnitude faster than the
(out of tree) DWARF unwinder - which is important for perf call graph
profiling. It is also significantly simpler and is coded defensively:
there has not been a single ORC related kernel crash so far, even
with early versions. (knock on wood!)
But the main advantage is that enabling the ORC unwinder allows
CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel
measurably:
With frame pointers disabled, GCC does not have to add frame pointer
instrumentation code to every function in the kernel. The kernel's
.text size decreases by about 3.2%, resulting in better cache
utilization and fewer instructions executed, resulting in a broad
kernel-wide speedup. Average speedup of system calls should be
roughly in the 1-3% range - measurements by Mel Gorman [1] have shown
a speedup of 5-10% for some function execution intense workloads.
The main cost of the unwinder is that the unwinder data has to be
stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel
config - which is a modest cost on modern x86 systems.
Given how young the ORC unwinder code is it's not enabled by default
- but given the performance advantages the plan is to eventually make
it the default unwinder on x86.
See Documentation/x86/orc-unwinder.txt for more details.
- Remove lguest support: its intended role was that of a temporary
proof of concept for virtualization, plus its removal will enable the
reduction (removal) of the paravirt API as well, so Rusty agreed to
its removal. (Juergen Gross)
- Clean up and fix FSGS related functionality (Andy Lutomirski)
- Clean up IO access APIs (Andy Shevchenko)
- Enhance the symbol namespace (Jiri Slaby)
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
objtool: Handle GCC stack pointer adjustment bug
x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone()
x86/fpu/math-emu: Add ENDPROC to functions
x86/boot/64: Extract efi_pe_entry() from startup_64()
x86/boot/32: Extract efi_pe_entry() from startup_32()
x86/lguest: Remove lguest support
x86/paravirt/xen: Remove xen_patch()
objtool: Fix objtool fallthrough detection with function padding
x86/xen/64: Fix the reported SS and CS in SYSCALL
objtool: Track DRAP separately from callee-saved registers
objtool: Fix validate_branch() return codes
x86: Clarify/fix no-op barriers for text_poke_bp()
x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs
selftests/x86/fsgsbase: Test selectors 1, 2, and 3
x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps
x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common
x86/asm: Fix UNWIND_HINT_REGS macro for older binutils
x86/asm/32: Fix regs_get_register() on segment registers
x86/xen/64: Rearrange the SYSCALL entries
x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads
...
|
|
Conflicts:
mm/page_alloc.c
Signed-off-by: Ingo Molnar <[email protected]>
|
|
nobody uses the list.
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
lo_rw_aio->call_read_iter->
1 aops->direct_IO
2 iov_iter_revert
lo_rw_aio_complete could happen between 1 and 2, the bio and bvec could
be freed before 2, which accesses bvec.
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Currently loop disables merge. While it makes sense for buffer IO mode,
directio mode can benefit from request merge. Without merge, loop could
send small size IO to underlayer disk and harm performance.
Reviewed-by: Omar Sandoval <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Loop can handle any size of request. Limiting it to 255 sectors just
burns the CPU for bio split and request merge for underlayer disk and
also cause bad fs block allocation in directio mode.
Reviewed-by: Omar Sandoval <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull block fixes from Jens Axboe:
"Unfortunately a few issues that warrant sending another pull request,
even if I had hoped to avoid it. This contains:
- A fix for multiqueue xen-blkback, on tear down / disconnect.
- A few fixups for NVMe, including a wrong bit definition, fix for
host memory buffers, and an nvme rdma page size fix"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: fix the definition of the doorbell buffer config support bit
nvme-pci: use dma memory for the host memory buffer descriptors
nvme-rdma: default MR page size to 4k
xen-blkback: stop blkback thread of every queue in xen_blkif_disconnect
|
|
The comments here are really outdated, and blk-mq made flushing much
simpler, so just fold the two cases into the callers.
Reviewed-by: Ming Lei <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
This is a different approach from the first attempt in f2c6df7dbf9a
("loop: support 4k physical blocksize"). Rather than extending
LOOP_{GET,SET}_STATUS, add a separate ioctl just for setting the block
size.
Reviewed-by: Ming Lei <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The physical block size is "the lowest possible sector size that the
hardware can operate on without reverting to read-modify-write
operations" (from the comment on blk_queue_physical_block_size()). Since
loop does buffered I/O on the backing file by default, the RMW unit is a
page. This isn't the case for direct I/O mode, but let's keep it simple.
Reviewed-by: Ming Lei <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
This is only used for setting the soft block size on the struct
block_device once and then never used again.
Reviewed-by: Ming Lei <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Careful analysis shows that this flag is not needed.
The RESCUER flag is only needed when a make_request_fn might:
- allocate a bio from the bioset
- submit it with generic_make_request() or similar
- allocate another bio from the bioset
The second allocation can block until the first bio is processed, so
a rescuer is needed to ensure the first bio does get processed. With
a rescuer it will only get processed when the make_request_fn completes.
In drbd, allocations from drbd_io_bio_set happen from drbd_new_req()
or w_restart_disk_io() which is only called to handle
RESTART_FROZEN_DISK_IO.
In former is called precisely once from the make_request_fn.
The later is never called by within the make_request_fn.
So there cannot be two allocations in the same call to the
make_request_fn, so a rescuer is not needed.
Allocations from drbd_md_io_bio_set are used for IO to the bitmap and
the activity log. There are only accessed from worker threads and
workqueues, never directly from make_request_fn.
Again, the rescuer isn't needed.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Globals where prefixed with drbd_, that was missed in the
in #ifdef'nd code when it is built-in.
Signed-off-by: Philipp Reisner <[email protected]>
Fixes: 183ece30053f ("drbd: move global variables to drbd namespace and make some static")
Signed-off-by: Jens Axboe <[email protected]>
|
|
We had one call to kmalloc that actually allocates an array. Switch that
one to the kmalloc_array() function.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
This was found by a static analysis tool. While highly unlikely, be sure
to return without dereferencing the NULL pointer.
Reported-by: Shaobo <[email protected]>
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
This is a follow-up to Gregs complaints that drbd clutteres the global
namespace.
Some of DRBD's module parameters are only used within one compilation
unit. Make these static.
Signed-off-by: Roland Kammerer <[email protected]>
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Nothing like having a very generic global variable in a tiny driver
subsystem to make a mess of the global namespace...
Note, there are many other "generic" named global variables in the drbd
subsystem, someone should fix those up one day before they hit a linking
error.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
conn_try_disconnect() could potentialy hit the BUG_ON()
in _conn_set_state() where it iterates over _drbd_set_state()
and "asserts" via BUG_ON() that the latter was successful.
If the STATE_SENT bit was not yet visible to conn_is_valid_transition()
early in _conn_request_state(), but became visible before conn_set_state()
later in that call path, we could hit the BUG_ON() after _drbd_set_state(),
because it returned SS_IN_TRANSIENT_STATE.
To avoid that race, we better protect set_bit(SENT_STATE) with the spinlock.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
When requesting a detach, we first suspend IO, and also inhibit meta-data IO
by means of drbd_md_get_buffer(), because we don't want to "fail" the disk
while there is IO in-flight: the transition into D_FAILED for detach purposes
may get misinterpreted as actual IO error in a confused endio function.
We wrap it all into wait_event(), to retry in case the drbd_req_state()
returns SS_IN_TRANSIENT_STATE, as it does for example during an ongoing
connection handshake.
In that example, the receiver thread may need to grab drbd_md_get_buffer()
during the handshake to make progress. To avoid potential deadlock with
detach, detach needs to grab and release the meta data buffer inside of
that wait_event retry loop. To avoid lock inversion between
mutex_lock(&device->state_mutex) and drbd_md_get_buffer(device),
introduce a new enum chg_state_flag CS_INHIBIT_MD_IO, and move the
call to drbd_md_get_buffer() inside the state_mutex grabbed in
drbd_req_state().
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <[email protected]>
Signed-off-by: Roland Kammerer <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
If there are still resources defined, but "empty", no more volumes
or connections configured, they don't hold module reference counts,
so rmmod is possible.
To avoid DRBD leftovers in debugfs, we need to call our global
drbd_debugfs_cleanup() only after all resources have been cleaned up.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Roland Kammerer <[email protected]>
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Race:
drbd_adm_attach() | async drbd_md_endio()
|
device->ldev is still NULL. |
|
drbd_md_read( |
.endio = drbd_md_endio; |
submit; |
.... |
wait for done == 1; | done = 1;
); | wake_up();
.. lot of other stuff, |
.. includeing taking and |
...giving up locks, |
.. doing further IO, |
.. stuff that takes "some time" |
| while in this context,
| this is the next statement.
| which means this context was scheduled
.. only then, finally, | away for "some time".
device->ldev = nbc; |
| if (device->ldev)
| put_ldev()
Unlikely, but possible. I was able to provoke it "reliably"
by adding an mdelay(500); after the wake_up().
Fixed by moving the if (!NULL) put_ldev() before done = 1;
Impact of the bug was that the resulting refcount imbalance
could lead to premature destruction of the object, potentially
causing a NULL pointer dereference during a subsequent detach.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Some backend devices claim to support write-same,
but would fail actual write-same requests.
Allow to set (or toggle) whether or not DRBD tries to support write-same.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The conn_higest_role() (a terribly misnamed function) returns
the role of the resource. It returned R_UNKNOWN as long as the
resource has not a single device.
Resources without devices are short living objects.
But it matters for the NOTIFY_CREATE netwlink message. It makes
a lot more sense to report R_SECONDARY for the newly created
resource than R_UNKNOWN.
I reviewd all call sites of conn_highest_role(), that change
does not matter for the other call sites.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
We get a few warnings when building kernel with W=1:
drbd/drbd_receiver.c:1224:6: warning: no previous prototype for 'one_flush_endio' [-Wmissing-prototypes]
drbd/drbd_req.c:1450:6: warning: no previous prototype for 'send_and_submit_pending' [-Wmissing-prototypes]
drbd/drbd_main.c:924:6: warning: no previous prototype for 'assign_p_sizes_qlim' [-Wmissing-prototypes]
....
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <[email protected]>
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
In protocol != C, we forgot to send the P_NEG_ACK for failing writes.
Once we no longer submit to local disk, because we already "detached",
due to the typical "on-io-error detach;" config setting,
we already send the neg acks right away.
Only those requests that have been submitted,
and have been error-completed by the local disk,
would forget to send the neg-ack,
and only in asynchronous replication (protocol != C).
Unless this happened during resync,
where we already always send acks, regardless of protocol.
The primary side needs the P_NEG_ACK in order to mark
the affected block(s) for resync in its out-of-sync bitmap.
If the blocks in question are not re-written again,
we may miss to resync them later, causing data inconsistencies.
This patch will always send the neg-acks, and also at least try to
persist the out-of-sync status on the local node already.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
When submitting batches of requests which had been queued on the
submitter thread, typically because they needed to wait for an
activity log transactions, use explicit plugging to help potential
merging of requests in the backend io-scheduler.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Two instances of list_for_each_safe can drop their tmp element, they
really just peel off each element in turn from the start of the list.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Recently, drbd_recv_header() was changed to potentially
implicitly "unplug" the backend device(s), in case there
is currently nothing to receive.
Be more explicit about it: re-introduce the original drbd_recv_header(),
and introduce a new drbd_recv_header_maybe_unplug() for use by the
receiver "main loop".
Using explicit plugging via blk_start_plug(); blk_finish_plug();
really helps the io-scheduler of the backend with merging requests.
Wrap the receiver "main loop" with such a plug.
Also catch unplug events on the Primary,
and try to propagate.
This is performance relevant. Without this, if the receiving side does
not merge requests, number of IOPS on the peer can me significantly
higher than IOPS on the Primary, and can easily become the bottleneck.
Together, both changes should help to reduce the number of IOPS
as seen on the backend of the receiving side, by increasing
the chance of merging mergable requests, without trading latency
for more throughput.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Since blk_mq_init_queue() initializes .nr_requests to the tag set
size and since that value is a good default for the skd driver, do
not overwrite the value set by blk_mq_init_queue(). This change
doubles the default value of .nr_requests.
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Since sTec s1120 devices support 64-bit DMA it is not necessary
to request data buffer bouncing. Hence remove the
blk_queue_bounce_limit() call.
Suggested-by: Christoph Hellwig <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
Pull xen-blkback fix from Konrad:
"[...] A bug-fix when shutting down xen block backend driver with
multiple queues and the driver not clearing all of them."
|
|
struct call_single_data is used in IPIs to transfer information between
CPUs. Its size is bigger than sizeof(unsigned long) and less than
cache line size. Currently it is not allocated with any explicit alignment
requirements. This makes it possible for allocated call_single_data to
cross two cache lines, which results in double the number of the cache lines
that need to be transferred among CPUs.
This can be fixed by requiring call_single_data to be aligned with the
size of call_single_data. Currently the size of call_single_data is the
power of 2. If we add new fields to call_single_data, we may need to
add padding to make sure the size of new definition is the power of 2
as well.
Fortunately, this is enforced by GCC, which will report bad sizes.
To set alignment requirements of call_single_data to the size of
call_single_data, a struct definition and a typedef is used.
To test the effect of the patch, I used the vm-scalability multiple
thread swap test case (swap-w-seq-mt). The test will create multiple
threads and each thread will eat memory until all RAM and part of swap
is used, so that huge number of IPIs are triggered when unmapping
memory. In the test, the throughput of memory writing improves ~5%
compared with misaligned call_single_data, because of faster IPIs.
Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Huang, Ying <[email protected]>
[ Add call_single_data_t and align with size of call_single_data. ]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Aaron Lu <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Make this const as is is only passed as an argument to the
function device_create_file and device_remove_file and the corresponding
arguments are of type const.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
We already have this pointer, no need to use to_nullb_device()
again.
Signed-off-by: Jens Axboe <[email protected]>
|
|
Commit 2984c86(nullb: factor disk parameters) has a typo. The
nullb_device allocation/free is done outside of null_add_dev. The commit
accidentally frees the nullb_device in error code path.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Linux 4.13-rc7
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull virtio fixes from Michael Tsirkin:
"Fixes two obvious bugs in virtio pci"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: fix cpu affinity support
virtio_blk: fix incorrect message when disk is resized
|
|
The SKD_ID_INCR flag in skd_request_context.id duplicates information
that is already available otherwise, e.g. through the block layer
request state and through skd_request_context.state. Hence remove
the code that manipulates this flag and also the flag itself.
Since skd_isr_completion_posted() only uses the lower bits of
skd_request_context.id as hardware tag, this patch does not change
the behavior of the skd driver. I'm referring to the following code:
tag = req_id & SKD_ID_SLOT_AND_TABLE_MASK;
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Although it is easy to see that skdev->disk != NULL if skdev->queue
!= NULL, add a test for skdev->disk to avoid that smatch reports the
following warning:
drivers/block/skd_main.c:3080 skd_free_disk()
error: we previously assumed 'disk' could be null (see line 3074)
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
It is not worth to keep the debug statements in skd_end_request().
Without debug statements that function only consists of two
statements. Hence inline skd_end_request().
Suggested-by: Christoph Hellwig <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The latter name follows more closely the function names used in
other blk-mq drivers.
Suggested-by: Christoph Hellwig <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Dan reported this:
The patch 2984c8684f96: "nullb: factor disk parameters" from Aug 14,
2017, leads to the following Smatch complaint:
drivers/block/null_blk.c:1759 null_init_tag_set()
error: we previously assumed 'nullb' could be null (see line
1750)
1755 set->cmd_size = sizeof(struct nullb_cmd);
1756 set->flags = BLK_MQ_F_SHOULD_MERGE;
1757 set->driver_data = NULL;
1758
1759 if (nullb->dev->blocking)
^^^^^^^^^^^^^^^^^^^^
And an unchecked dereference.
nullb could be NULL here.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
In xen_blkif_disconnect, before checking inflight I/O, following code
stops the blkback thread,
if (ring->xenblkd) {
kthread_stop(ring->xenblkd);
wake_up(&ring->shutdown_wq);
}
If there is inflight I/O in any non-last queue, blkback returns -EBUSY
directly, and above code would not be called to stop thread of remaining
queue and processs them. When removing vbd device with lots of disk I/O
load, some queues with inflight I/O still have blkback thread running even
though the corresponding vbd device or guest is gone.
And this could cause some problems, for example, if the backend device type
is file, some loop devices and blkback thread always lingers there forever
after guest is destroyed, and this causes failure of umounting repositories
unless rebooting the dom0.
This patch allows thread of every queue has the chance to get stopped.
Otherwise, only thread of queue previous to(including) first busy one get
stopped, blkthread of remaining queue will still run. So stop all threads
properly and return -EBUSY if any queue has inflight I/O.
Signed-off-by: Annie Li <[email protected]>
Reviewed-by: Herbert van den Bergh <[email protected]>
Reviewed-by: Bhavesh Davda <[email protected]>
Reviewed-by: Adnan Misherfi <[email protected]>
Acked-by: Roger Pau Monné <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
|