| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The structure sysfs_dev_char_kobj is local only to the driver core code,
so move it out of the global class.h file and into the internal base.h
file as no one else should be touching this symbol.
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In commit dcfbb67e48a2 ("driver core: class: use lock_class_key already
present in struct subsys_private") we removed the key parameter to the
function class_create() but forgot to remove it from the kerneldoc,
which causes a build warning. Fix that up by removing the key parameter
from the documentation as it is now gone.
Reported-by: Stephen Rothwell <[email protected]>
Fixes: dcfbb67e48a2 ("driver core: class: use lock_class_key already present in struct subsys_private")
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We don't currently support paging for regmaps where the I/O happens through
bus provided reg_read() and reg_write() operatons, we simply ignore the
range since nothing is wired up properly. Wire things up.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The error message printed when we fail to locate the cache type the map
requested says it can't find a compress type rather than a cache type,
fix that. Since the compressed type is the only one currently compiled
conditionally it's likely to be the missing type but that might not always
be true and is still unclear.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
If there is no cache entry available we will get -ENOENT from the cache
implementation, handle this gracefully and skip rather than treating it as
an error.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In commit 37e98d9bedb5 ("driver core: bus: move lock_class_key into
dynamic structure"), the lock_key variable moved out of struct bus_type
and into struct subsys_private, yet the documentation for it did not
move. Fix that up and place the documentation comment in the correct
location.
Cc: "Rafael J. Wysocki" <[email protected]>
Fixes: 37e98d9bedb5 ("driver core: bus: move lock_class_key into dynamic structure")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Merge series from Maxime Chevallier <[email protected]>:
This introduces a helper that factors out register rewriting, it
will be the basis for further work that will need cross tree
merges so is on a branch.
|
|
Register addresses passed to regmap operations can be offset with
regmap.reg_base and downshifted with regmap.reg_downshift.
Add a helper to apply both these operations and return the translated
address, that we can then use to perform the actual register operation
ont the underlying bus.
Signed-off-by: Maxime Chevallier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The kernel coding style does not require 'extern' in function prototypes
in .h files, so remove them from drivers/base/physical_location.h as
they are not needed.
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The kernel coding style does not require 'extern' in function prototypes
in .h files, so remove them from drivers/base/base.h as they are not
needed.
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In commit 37e98d9bedb5 ("driver core: bus: move lock_class_key into
dynamic structure"), we moved the lock_class_key into the internal
structure shared by busses and classes, but only used it for buses.
Move the class code to use this structure as it is already present and
being allocated, instead of the statically allocated on-the-stack
variable that class_create() was using as part of a macro wrapper around
the core function call.
Reviewed-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The fwnode parameter is not altered in the following APIs:
- fwnode_get_next_parent_dev()
- fwnode_is_ancestor_of()
- fwnode_graph_get_endpoint_count()
so constify them.
Reported-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
fwnode_get_phy_mode() does not modify the fwnode argument, merely
using it to obtain the phy-mode property value. Therefore, it can
be made const.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It's funny to think about getting a reference count of a constant
structure pointer, but this locks into place the private data
"underneath" the struct bus_type() which is important to not go away
while we are working with the bus structure for some callbacks.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The driver_find() function can now take a const * to bus_type, not just
a * so fix that up.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The bus_rescan_devices() function was missed in the previous change of
the bus_for_each* constant pointer changes, so fix it up now to take a
const * to struct bus_type.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
bus_register() is now safe to take a constant * to bus_type, so make
that change and mark the subsys_private bus_type * constant as well.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
struct bus_type should never be modified in a sysfs callback as there is
nothing in the structure to modify, and frankly, the structure is almost
never used in a sysfs callback, so mark it as constant to allow struct
bus_type to be moved to read-only memory.
Cc: "David S. Miller" <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "K. Y. Srinivasan" <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Alexandre Bounine <[email protected]>
Cc: Alison Schofield <[email protected]>
Cc: Ben Widawsky <[email protected]>
Cc: Dexuan Cui <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Harald Freudenberger <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Hu Haowen <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Laurentiu Tudor <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Stuart Yoder <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vishal Verma <[email protected]>
Cc: Yanteng Si <[email protected]>
Acked-by: Ilya Dryomov <[email protected]> # rbd
Acked-by: Ira Weiny <[email protected]> # cxl
Reviewed-by: Alex Shi <[email protected]>
Acked-by: Iwona Winiarska <[email protected]>
Acked-by: Dan Williams <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]> # pci
Acked-by: Wei Liu <[email protected]>
Acked-by: Martin K. Petersen <[email protected]> # scsi
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that all accesses of dev_root is through the bus_get_dev_root()
call, move the pointer out of struct bus_type and into the private
dynamic structure, subsys_private.
With this change, there is no modifiable portions of struct bus_type so
it can be marked as a constant structure and moved to read-only memory.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The functions device_create() and device_create_with_groups() do not
modify the struct class passed into it, so enforce this by changing the
function parameters to be struct const class.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The pointer to a struct class in a struct device should never be used to
change anything in that class. So mark it as constant to enforce this
requirement.
This requires a few minor changes to some internal driver core functions
to enforce the const * being used here now.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
device_destroy() does not modify the struct class passed into it, so
mark it as const to enforce this rule.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The class_create_file*() and class_remove_file*() functions do not
modify the struct class at all, so mark them as const * to enforce that.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The class_find_device*() functions do not modify the struct class or the
struct device passed into it, so mark them as const * to enforce that.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
class_for_each_device() does not modify the struct class or the struct
device passed into it, so mark them as const * to enforce that.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
class_dev_iter_init() does not modify the struct class or the struct
device passed into it, so mark them as const * to enforce that.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The module owner field for a struct class was never actually used, so
remove it as it is not doing anything at all.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There is no need to manually set the owner of a struct class, as the
registering function does it automatically, so remove all of the
explicit settings from various drivers that did so as it is unneeded.
This allows us to remove this pointer entirely from this structure going
forward.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There's no need to manually have to set the module owner of a class, the
compiler should do it automatically for you, so add a module * to the
__class_register() function and allow it to set the module owner
automatically.
This will let us move the module pointer out of struct class eventually,
as it should not be embedded in there if we wish for it to be a
read-only structure eventually.
And, funny story, this module pointer isn't even being used for
anything, so while we will keep it around for now, it's not like it even
matters.
Cc: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
checkpatch.pl warned:
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
Align the return value to regcache_drop_region().
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
There is no sense in doing a cache sync on REGCACHE_NONE regmaps.
Instead of panicking the kernel due to missing cache_ops, return an error
to client driver.
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Pass the unique name of the resource to devm_add_action(),
so it will be easier to debug managed resources.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Some of the functions do not provide Return: section on absence of which
kernel-doc complains. Besides that several functions return the fwnode
handle with incremented reference count. Add a respective note to make sure
that the caller decrements it when it's not needed anymore.
While at it, unify the style of the Return: sections.
Reported-by: Daniel Kaehn <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If the file is written to and sync_state() hasn't been called for the
device yet, then call sync_state() for the device independent of the
state of its consumers.
This is useful for supplier devices that have one or more consumers that
don't have a driver but the consumers are in a state that don't use the
resources supplied by the supplier device.
This gives finer grained control than using the
fw_devlink.sync_state=timeout kernel commandline parameter.
Signed-off-by: Saravana Kannan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When all devices that could probe have finished probing (based on
deferred_probe_timeout configuration or late_initcall() when
!CONFIG_MODULES), this parameter controls what to do with devices that
haven't yet received their sync_state() calls.
fw_devlink.sync_state=strict is the default and the driver core will
continue waiting on all consumers of a device to probe successfully
before sync_state() is called for the device. This is the default
behavior since calling sync_state() on a device when all its consumers
haven't probed could make some systems unusable/unstable. When this
option is selected, we also print the list of devices that haven't had
sync_state() called on them by the time all devices the could probe have
finished probing.
fw_devlink.sync_state=timeout will cause the driver core to give up
waiting on consumers and call sync_state() on any devices that haven't
yet received their sync_state() calls. This option is provided for
systems that won't become unusable/unstable as they might be able to
save power (depends on state of hardware before kernel starts) if all
devices get their sync_state().
Signed-off-by: Saravana Kannan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
CONFIG_SYSFS_DEPRECATED*
In removing the CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2
config options, I messed up in the __class_register() function and got
the logic incorrect. Fix this all up by just removing the special case
of a block device class logic in this function, as that is what is
intended.
In testing, this solves the boot problem on my systems, hopefully on
others as well.
Cc: "Rafael J. Wysocki" <[email protected]>
Reported-by: Stephen Rothwell <[email protected]>
Fixes: 721da5cee9d4 ("driver core: remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Merge series from William Breathitt Gray <[email protected]>:
There are devices which have interrupt support with mask and ack
registers but no status register. Add a flag which lets us support
them, we just assume that all the interrupts fired.
|
|
CONFIG_SYSFS_DEPRECATED was added in commit 88a22c985e35
("CONFIG_SYSFS_DEPRECATED") in 2006 to allow systems with older versions
of some tools (i.e. Fedora 3's version of udev) to boot properly. Four
years later, in 2010, the option was attempted to be removed as most of
userspace should have been fixed up properly by then, but some kernel
developers clung to those old systems and refused to update, so we added
CONFIG_SYSFS_DEPRECATED_V2 in commit e52eec13cd6b ("SYSFS: Allow boot
time switching between deprecated and modern sysfs layout") to allow
them to continue to boot properly, and we allowed a boot time parameter
to be used to switch back to the old format if needed.
Over time, the logic that was covered under these config options was
slowly removed from individual driver subsystems successfully, removed,
and the only thing that is now left in the kernel are some changes in
the block layer's representation in sysfs where real directories are
used instead of symlinks like normal.
Because the original changes were done to userspace tools in 2006, and
all distros that use those tools are long end-of-life, and older
non-udev-based systems do not care about the block layer's sysfs
representation, it is time to finally remove this old logic and the
config entries from the kernel.
Cc: Jonathan Corbet <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Acked-by: Jens Axboe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Some devices lack status registers, yet expect to handle interrupts.
Introduce a no_status flag to indicate such a configuration, where
rather than read a status register to verify, all interrupts received
are assumed to be active.
Cc: Mark Brown <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
Link: https://lore.kernel.org/r/bd501b4b5ff88da24d467f75e8c71b4e0e6f21e2.1677515341.git.william.gray@linaro.org
Signed-off-by: Mark Brown <[email protected]>
|
|
Some SoundWire devices have larger width device specific register
maps, in addition to the standard SoundWire 8-bit map. Update the
helpers to allow accessing arbitrarily sized register values and remove
the explicit 8-bit restriction from regmap_sdw_config_check.
Signed-off-by: Lucas Tanure <[email protected]>
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In the regmap config reg_bits represents the number of address bits not
the number of value bits. Correct the misleading comment which looks a
lot like it suggests the register value itself is 32-bits wide.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"A set of updates for the interrupt susbsystem:
- Prevent possible NULL pointer derefences in
irq_data_get_affinity_mask() and irq_domain_create_hierarchy()
- Take the per device MSI lock before invoking code which relies on
it being hold
- Make sure that MSI descriptors are unreferenced before freeing
them. This was overlooked when the platform MSI code was converted
to use core infrastructure and results in a fals positive warning
- Remove dead code in the MSI subsystem
- Clarify the documentation for pci_msix_free_irq()
- More kobj_type constification"
* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
genirq/msi: Drop dead domain name assignment
irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
genirq/irqdesc: Make kobj_type structures constant
PCI/MSI: Clarify usage of pci_msix_free_irq()
genirq/msi: Take the per-device MSI lock before validating the control structure
genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is another small set of driver core patches.
They resolve some reported problems with the previous driver core
patches that are in your tree.
They solve a problem with the bus_type cleanup as reported and fixed
by Geert, and two fw_devlink changes to make debugging problems
easier.
There is one known outstanding problem with the fw_deflink changes in
your tree that is still being worked on, and it looks like a clk core
change will be submitted soon for that, probably after 6.3-rc1.
All three of these have been in linux-next with no reported problems
(only reports that they fixed problems)"
* tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: fw_devlink: Print full path and name of fwnode
driver core: fw_devlink: Avoid spurious error message
driver core: bus: Handle early calls to bus_to_subsys()
|
|
Miquel reported a warning in the MSI core which is triggered when
interrupts are freed via platform_msi_device_domain_free().
This code got reworked to use core functions for freeing the MSI
descriptors, but nothing took care to clear the msi_desc->irq entry, which
then triggers the warning in msi_free_msi_desc() which uses desc->irq to
validate that the descriptor has been torn down. The same issue exists in
msi_domain_populate_irqs().
Up to the point that msi_free_msi_descs() grew a warning for this case,
this went un-noticed.
Provide the counterpart of msi_domain_populate_irqs() and invoke it in
platform_msi_device_domain_free() before freeing the interrupts and MSI
descriptors and also in the error path of msi_domain_populate_irqs().
Fixes: 2f2940d16823 ("genirq/msi: Remove filter from msi_free_descs_free_range()")
Reported-by: Miquel Raynal <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Miquel Raynal <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/87mt4wkwnv.ffs@tglx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
|
|
Some of the log messages were printing just the fwnode name. While it's
short, it's not always uniquely identifiable in system. So print the
full path and name to make debugging easier.
Signed-off-by: Saravana Kannan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
fw_devlink can sometimes try to create a device link with the consumer
and supplier as the same device. These attempts will fail (correctly),
but are harmless. So, avoid printing an error for these cases. Also, add
more detail to the error message.
Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
Reported-by: Vladimir Oltean <[email protected]>
Reported-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Saravana Kannan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When calling soc_device_match() from early_initcall(), bus_kset is still
NULL, causing a crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
...
Call trace:
__lock_acquire+0x530/0x20f0
lock_acquire.part.0+0xc8/0x210
lock_acquire+0x64/0x80
_raw_spin_lock+0x4c/0x60
bus_to_subsys+0x24/0xac
bus_for_each_dev+0x30/0xcc
soc_device_match+0x4c/0xe0
r8a7795_sysc_init+0x18/0x60
rcar_sysc_pd_init+0xb0/0x33c
do_one_initcall+0x128/0x2bc
Before, bus_for_each_dev() handled this gracefully by checking that
the back-pointer to the private structure was valid.
Fix this by adding a NULL check for bus_kset to bus_to_subsys().
Fixes: 83b9148df2c95e23 ("driver core: bus: bus iterator cleanups")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/0a92979f6e790737544638e8a4c19b0564e660a2.1676983596.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|