| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As the PM core already have wakeup management during the system PM phase,
it seems reasonable that genpd and its users should be able to rely on
that. Therefore let's remove this from pm_genpd_prepare().
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The PM core increases and decreases the runtime PM usage count in the
system PM prepare phase. This makes some of the pm_runtime_get|put*()
calls in pm_genpd_prepare() redundant, so let's remove them.
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
It is entirely possible for of_count_phandle_wit_args to
return a -ve error return value so we need to check for this
otherwise we end up allocating a negative number of clk objects.
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
opp core allows OPPs to be explicitly marked as shared from platform
code, in case of operating-point v1 bindings.
Though we do everything fine in that case, we don't set the flag in the
opp-table to indicate that the OPPs are shared. It works fine today as
the flag isn't used anywhere else in the core, but we should be doing
the right thing by marking it set.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Move dev_pm_opp_set_sharing_cpus() towards the end of the file. This
is required for better readability after the next patch is applied,
which adds dev_pm_opp_get_sharing_cpus().
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Few of the routines in cpu.c were missing these, add them.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Don't send -EINVAL and propagate what's received from _find_opp_table().
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
As a part of the ongoing consolidation of genpd, it's become questionable
whether clients actually needs to be able to assign their own set of
->save|restore_state() callbacks. Currently all users copes fine with the
default callbacks, so let's remove the configuration option and stick to
the default ones.
This enables further clarifications of the related code and let's also
rename pm_genpd_default_save|restore_state() into
__genpd_runtime_suspend|resume() to apply the rule of static functionnames
in genpd.
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Follow genpd's rule for names of static functions, by renaming
pm_genpd_runtime_suspend|resume() to genpd_runtime_suspend|resume().
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The genpd governor validates the latency constraints to find out whether
it's acceptable to runtime suspend a device. Earlier this validation was
made to know whether it was okay to invoke the ->stop() callback for the
device, hence the governor used the name "stop_ok" for the related
variables.
To clarify the code around this, let's rename these variables from
"stop_ok" to "suspend_ok".
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
As pm_runtime_set_active() may fail because the device's parent isn't
active, we can end up executing the ->runtime_resume() callback for the
device when it isn't allowed.
Fix this by invoking pm_runtime_set_active() before running the callback
and let's also deal with the error code.
Fixes: 37f204164dfb (PM: Add pm_runtime_suspend|resume_force functions)
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Cc: 3.15+ <[email protected]> # 3.15+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Now wakeirq stops working for device if wakeup option for
this device will be reconfigured through sysfs, like:
echo disabled > /sys/devices/platform/extcon_usb1/power/wakeup
echo enabled > /sys/devices/platform/extcon_usb1/power/wakeup
Once above set of commands is executed the device's wakeup_source
opject will be recreated and dev->power.wakeup->wakeirq field will
contain NULL. As result, device_wakeup_arm_wake_irqs() will not arm
wakeirq for the affected device.
Hece, lets try to fix it in the following way:
check for dev->wakeirq field when device_wakeup_attach() is called
and if !NULL re-attach wakeirq to the device
Signed-off-by: Grygorii Strashko <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
* pm-avs:
PM / AVS: rockchip-io: add io selectors and supplies for rk3399
* pm-clk:
PM / clk: Add support for obtaining clocks from device-tree
* pm-devfreq:
PM / devfreq: Spelling s/frequnecy/frequency/
* pm-sleep:
ACPI / PM: Runtime resume devices when waking from hibernate
PM / sleep: Clear pm_suspend_global_flags upon hibernate
|
|
The PM clocks framework requires clients to pass either a con-id or a
valid clk pointer in order to add a clock to a device. Add a new
function of_pm_clk_add_clks() to allows device clocks to be retrieved
from device-tree and populated for a given device. Note that it is
not necessary to make the compilation of this new function dependent
upon CONFIG_OF because there are stubs functions for the device-tree
APIs used.
In order to handle errors encountered when adding clocks from
device-tree, add a function pm_clk_remove_clk() to remove any clocks
(using a pointer to the clk structure) that have been added
successfully before the error occurred.
Signed-off-by: Jon Hunter <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
* pm-cpuidle:
cpuidle: menu: help gcc generate slightly better code
cpuidle: menu: avoid expensive square root computation
* pm-sleep:
PM / suspend: replacing printk
PM/freezer: y2038, use boottime to compare tstamps
PM / sleep: declare __tracedata symbols as char[] rather than char
* pm-domains:
PM / Domains: Fix potential NULL pointer dereference
PM / Domains: Fix removal of a subdomain
PM / Domains: Propagate start and restore errors during runtime resume
PM / Domains: Join state name and index in debugfs output
PM / Domains: Restore alignment of slaves in debugfs output
PM / Domains: remove old power on/off latencies
ARM: imx6: pm: declare pm domain latency on power_state struct
PM / Domains: Support for multiple states
|
|
In the function of_genpd_get_from_provider(), we never check to see if
the argument 'genpdspec' is NULL before dereferencing it. Add error
checking to handle any NULL pointers.
Signed-off-by: Jon Hunter <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Commit 30e7a65b3fdb (PM / Domains: Ensure subdomain is not in use
before removing) added a test to ensure that a subdomain is not a
master to another subdomain or if any devices are using the subdomain
before removing. This change incorrectly used the "slave_links" list to
determine if the subdomain is a master to another subdomain, where it
should have been using the "master_links" list instead. The
"slave_links" list will never be empty for a subdomain and so a
subdomain can never be removed. Fix this by testing if the
"master_links" list is empty instead.
Fixes: 30e7a65b3fdb (PM / Domains: Ensure subdomain is not in use before removing)
Signed-off-by: Jon Hunter <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
During runtime resume the return values of the start and restore steps
are ignored. As a result drivers are not notified of runtime resume
failures and can't propagate them up. Fix it by returning an error if
either the start or restore step fails, and clean up properly in the
error path.
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
For low-power states, the state index is part of the state, hence join
them with a hyphen in the /sys/kernel/debug/pm_genpd/pm_genpd_summary
output. E.g. "off 0" becomes "off-0".
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The slave domains are no longer aligned with the table header in the
/sys/kernel/debug/pm_genpd/pm_genpd_summary output. Worse, the alignment
differs depending on the actual name of the state.
Format the state name and index into a buffer, and print that like
before to restore alignment.
Use "%u" for unsigned int while we're at it.
Fixes: fc5cbf0c94b6f7fd (PM / Domains: Support for multiple states)
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Stephen pointed out recently, that few structures always confuse him as
they aren't named properly. And this patch tries to address that:
Names are updated as:
- device_opp or dev_opp -> opp_table
- dev_opp_list -> opp_tables
- dev_opp_list_lock -> opp_table_lock
- device_list_opp -> opp_device (it was never a list, but a structure)
- list_dev -> opp_dev
- And similar changes in comments and function names as well.
This also fixes checkpatch warnings that were generated with this patch.
No functional changes.
Suggested-by: Stephen Boyd <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Some comments were just copy/pasted from other sections and don't match
to the routines they were added for. Fix them.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
We are currently required to do two checks for regulator pointer:
IS_ERR() and IS_NULL().
And multiple instances are reported, about both of these not being used
consistently and so resulting in crashes.
Fix that by initializing regulator pointer with an error value and
checking it only against an error.
This makes code more consistent and more efficient.
Fixes: 7d34d56ef334 (PM / OPP: Disable OPPs that aren't supported by the regulator)
Reported-and-tested-by: Jon Hunter <[email protected]>
Reported-and-tested-by: Tony Lindgren <[email protected]>
Reported-and-tested-by: Guenter Roeck <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
[ rjw: Initialize to -ENXIO ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Now that all known users have been converted to use state latencies,
we can remove the latency field in the generic_pm_domain structure.
Signed-off-by: Axel Haslam <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Some hardware (eg. OMAP), has the ability to enter different low power
modes for a given power domain. This allows for more fine grained control
over the power state of the platform. As a typical example, some registers
of the hardware may be implemented with retention flip-flops and be able
to retain their state at lower voltages allowing for faster on/off
latencies and an increased window of opportunity to enter an intermediate
low power state other than "off"
When trying to set a power domain to off, the genpd governor will choose
the deepest state that will respect the qos constraints of all the devices
and sub-domains on the power domain. The state chosen by the governor is
saved in the "state_idx" field of the generic_pm_domain structure and
shall be used by the power_off and power_on callbacks to perform the
necessary actions to set the power domain into (and out of) the state
indicated by state_idx.
States must be declared in ascending order from shallowest to deepest,
deepest meaning the state which takes longer to enter and exit.
For platforms that don't declare any states, a single a single "off"
state is used. Once all platforms are converted to use the state array,
the legacy on/off latencies will be removed.
[ Lina: Modified genpd state initialization and remove use of
save_state_latency_ns in genpd timing data ]
Suggested-by: Kevin Hilman <[email protected]>
Signed-off-by: Lina Iyer <[email protected]>
Signed-off-by: Axel Haslam <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
We kept u_volt_min/max initialized to 0, when only the target voltage is
present in DT, instead of the target/min/max triplet.
This didn't go well with the regulator framework, as on few calls the
min voltage was set to target and max was set to 0 and so resulted in a
kernel crash like below:
kernel BUG at ../drivers/regulator/core.c:216!
[<c0684af4>] (regulator_check_voltage) from [<c06857ac>] (regulator_set_voltage_unlocked+0x58/0x230)
[<c06857ac>] (regulator_set_voltage_unlocked) from [<c06859ac>] (regulator_set_voltage+0x28/0x54)
[<c06859ac>] (regulator_set_voltage) from [<c0775b28>] (_set_opp_voltage+0x30/0x98)
[<c0775b28>] (_set_opp_voltage) from [<c0776630>] (dev_pm_opp_set_rate+0xf0/0x28c)
[<c0776630>] (dev_pm_opp_set_rate) from [<c096f784>] (__cpufreq_driver_target+0x184/0x2b4)
[<c096f784>] (__cpufreq_driver_target) from [<c0973760>] (dbs_check_cpu+0x1b0/0x1f4)
[<c0973760>] (dbs_check_cpu) from [<c0973f30>] (cpufreq_governor_dbs+0x324/0x5c4)
[<c0973f30>] (cpufreq_governor_dbs) from [<c0970958>] (__cpufreq_governor+0xe4/0x1ec)
[<c0970958>] (__cpufreq_governor) from [<c09711e0>] (cpufreq_init_policy+0x64/0x8c)
[<c09711e0>] (cpufreq_init_policy) from [<c09718cc>] (cpufreq_online+0x2fc/0x708)
[<c09718cc>] (cpufreq_online) from [<c0765ff0>] (subsys_interface_register+0x94/0xd8)
[<c0765ff0>] (subsys_interface_register) from [<c0970530>] (cpufreq_register_driver+0x14c/0x19c)
[<c0970530>] (cpufreq_register_driver) from [<c09746dc>] (dt_cpufreq_probe+0x70/0xec)
[<c09746dc>] (dt_cpufreq_probe) from [<c076907c>] (platform_drv_probe+0x4c/0xb0)
[<c076907c>] (platform_drv_probe) from [<c07678e0>] (driver_probe_device+0x214/0x2c0)
[<c07678e0>] (driver_probe_device) from [<c0767a18>] (__driver_attach+0x8c/0x90)
[<c0767a18>] (__driver_attach) from [<c0765c2c>] (bus_for_each_dev+0x68/0x9c)
[<c0765c2c>] (bus_for_each_dev) from [<c0766d78>] (bus_add_driver+0x1a0/0x218)
[<c0766d78>] (bus_add_driver) from [<c076810c>] (driver_register+0x78/0xf8)
[<c076810c>] (driver_register) from [<c0301d74>] (do_one_initcall+0x90/0x1d8)
[<c0301d74>] (do_one_initcall) from [<c1100e14>] (kernel_init_freeable+0x15c/0x1fc)
[<c1100e14>] (kernel_init_freeable) from [<c0b27a0c>] (kernel_init+0x8/0xf0)
[<c0b27a0c>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c)
Code: e1550004 baffffeb e3a00000 e8bd8070 (e7f001f2)
Fix that by initializing u_volt_min/max to the target voltage in such cases.
Reported-and-tested-by: Krzysztof Kozlowski <[email protected]>
Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings)
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Commit 7d34d56ef334 (PM / OPP: Disable OPPs that aren't supported by
the regulator) causes a crash to happen on Tegra124 Jetson TK1 when
using the DFLL clock source for the CPU. The DFLL manages the voltage
itself and so there is no regulator specified for the OPPs and so we
get a crash when we try to dereference the regulator pointer. Fix
this by checking to see if the regulator IS_ERR_OR_NULL before
dereferencing it.
Fixes: 7d34d56ef334 (PM / OPP: Disable OPPs that aren't supported by the regulator)
Signed-off-by: Jon Hunter <[email protected]>
Reported-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Accessing more than one byte from a symbol declared simply 'char' is undefined
behavior, as reported by UBSAN:
UBSAN: Undefined behaviour in drivers/base/power/trace.c:178:18
load of address ffffffff8203fc78 with insufficient space
for an object of type 'char'
Avoid this by declaring the symbols as arrays.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
This adds a routine, dev_pm_opp_set_rate(), responsible for configuring
power-supply and clock source for an OPP.
The OPP is found by matching against the target_freq passed to the
routine. This shall replace similar code present in most of the OPP
users and help simplify them a lot.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
OPP core has got almost everything now to manage device's OPP
transitions, the only thing left is device's clk. Get that as well.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
V2 bindings have better support for clock-latency and voltage-tolerance
and doesn't need special care. To use callbacks, like
dev_pm_opp_get_max_{transition|volt}_latency(), irrespective of the
bindings, the core needs to know clock-latency/voltage-tolerance for the
earlier bindings.
This patch reads clock-latency/voltage-tolerance from the device node,
irrespective of the bindings (to keep it simple) and use them only for
V1 bindings.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
In few use cases (like: cpufreq), it is desired to get the maximum
latency for changing OPPs. Add support for that.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
In few use cases (like: cpufreq), it is desired to get the maximum
voltage latency for changing OPPs. Add support for that.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Disable any OPPs where the connected regulator isn't able to provide the
specified voltage.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
This allows the OPP core to request/free the regulator resource,
attached to a device OPP. The regulator device is fetched using the name
provided by the driver, while calling: dev_pm_opp_set_regulator().
This will work for both OPP-v1 and v2 bindings.
This is a preliminary step for moving the OPP switching logic into the
OPP core.
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
* pm-core:
PM: Avoid false-positive warnings in dev_pm_domain_set()
ACPI / LPSS: set PM domain via helper setter
* pm-domains:
PM / Domains: Silence compiler warning for an unused function
|
|
There is a WARN_ON() in dev_pm_domain_set() that triggers on attempts
to set the pm_domain pointer for devices with a driver bound.
However, that WARN_ON() triggers on attempts to clear the pointer
too and the test it uses is based on checking the device's
p->knode_driver pointer which still is set when the device bus
type's/driver's ->remove callback has been executed. This
leads to false-positive warnings when bus type code calls
dev_pm_domain_set() to clear the pm_domain pointer after
invoking the driver's ->remove() callback.
To avoid those false-positives, make dev_pm_domain_set() check
if the pointer passed to it is NULL and skip the warning in
that case.
Fixes: 989561de9b51 (PM / Domains: add setter for dev.pm_domain)
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Andy Shevchenko <[email protected]>
Tested-by: Sinan Kaya <[email protected]>
Tested-by: Steven Rostedt <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
|
|
The only remaining caller of genpd_poweron() is conditionally compiled
based on CONFIG_PM_GENERIC_DOMAINS_OF, so we get a warning when that is
unset.
By moving the locking/unlocking of the genpd outside genpd_poweron(), thus
to the caller, genpd_poweron() becomes redundant.
Within this context let's then rename the wrapper function,
__genpd_poweron(), to genpd_poweron() as it will then be consistent with
its friend genpd_poweroff().
This change silence the warning about the unused function.
Reported-by: Arnd Bergmann <[email protected]>
Fixes: ea823c7cbffa "PM / Domains: Remove pm_genpd_poweron() API"
Signed-off-by: Ulf Hansson <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Cc: 4.4+ <[email protected]> # 4.4+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
* pm-cpuidle:
cpuidle: coupled: remove unused define cpuidle_coupled_lock
cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze
* pm-cpufreq:
cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
cpufreq: Use list_is_last() to check last entry of the policy list
cpufreq: Fix NULL reference crash while accessing policy->governor_data
* pm-domains:
PM / Domains: Fix typo in comment
PM / Domains: Fix potential deadlock while adding/removing subdomains
PM / domains: fix lockdep issue for all subdomains
* pm-sleep:
PM: APM_EMULATION does not depend on PM
|
|
Acked-by: Kevin Hilman <[email protected]>
Signed-off-by: Moritz Fischer <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
We must preserve the same order of how we acquire and release the lock for
genpd, as otherwise we may encounter deadlocks.
The power on phase of a genpd starts by acquiring its lock. Then it walks
the hierarchy of its parent domains to be able to power on these first, as
per design of genpd.
From a locking perspective this means the locks of the parents becomes
acquired after the lock of the subdomain.
Let's fix pm_genpd_add|remove_subdomain() to maintain the same order of
acquiring/releasing the genpd lock as being applied in the power on/off
sequence.
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
During genpd_poweron, genpd->lock is acquired recursively for each
parent (master) domain, which are separate objects. This confuses
lockdep, which considers every operation on genpd->lock as being done on
the same lock class. This leads to the following false positive warning:
=============================================
[ INFO: possible recursive locking detected ]
4.4.0-rc4-xu3s #32 Not tainted
---------------------------------------------
swapper/0/1 is trying to acquire lock:
(&genpd->lock){+.+...}, at: [<c0361550>] __genpd_poweron+0x64/0x108
but task is already holding lock:
(&genpd->lock){+.+...}, at: [<c0361af8>] genpd_dev_pm_attach+0x168/0x1b8
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&genpd->lock);
lock(&genpd->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by swapper/0/1:
#0: (&dev->mutex){......}, at: [<c0350910>] __driver_attach+0x48/0x98
#1: (&dev->mutex){......}, at: [<c0350920>] __driver_attach+0x58/0x98
#2: (&genpd->lock){+.+...}, at: [<c0361af8>] genpd_dev_pm_attach+0x168/0x1b8
stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc4-xu3s #32
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c0016c98>] (unwind_backtrace) from [<c00139c4>] (show_stack+0x10/0x14)
[<c00139c4>] (show_stack) from [<c0270df0>] (dump_stack+0x84/0xc4)
[<c0270df0>] (dump_stack) from [<c00780b8>] (__lock_acquire+0x1f88/0x215c)
[<c00780b8>] (__lock_acquire) from [<c007886c>] (lock_acquire+0xa4/0xd0)
[<c007886c>] (lock_acquire) from [<c0641f2c>] (mutex_lock_nested+0x70/0x4d4)
[<c0641f2c>] (mutex_lock_nested) from [<c0361550>] (__genpd_poweron+0x64/0x108)
[<c0361550>] (__genpd_poweron) from [<c0361b00>] (genpd_dev_pm_attach+0x170/0x1b8)
[<c0361b00>] (genpd_dev_pm_attach) from [<c03520a8>] (platform_drv_probe+0x2c/0xac)
[<c03520a8>] (platform_drv_probe) from [<c03507d4>] (driver_probe_device+0x208/0x2fc)
[<c03507d4>] (driver_probe_device) from [<c035095c>] (__driver_attach+0x94/0x98)
[<c035095c>] (__driver_attach) from [<c034ec14>] (bus_for_each_dev+0x68/0x9c)
[<c034ec14>] (bus_for_each_dev) from [<c034fec8>] (bus_add_driver+0x1a0/0x218)
[<c034fec8>] (bus_add_driver) from [<c035115c>] (driver_register+0x78/0xf8)
[<c035115c>] (driver_register) from [<c0338488>] (exynos_drm_register_drivers+0x28/0x74)
[<c0338488>] (exynos_drm_register_drivers) from [<c0338594>] (exynos_drm_init+0x6c/0xc4)
[<c0338594>] (exynos_drm_init) from [<c00097f4>] (do_one_initcall+0x90/0x1dc)
[<c00097f4>] (do_one_initcall) from [<c0895e08>] (kernel_init_freeable+0x158/0x1f8)
[<c0895e08>] (kernel_init_freeable) from [<c063ecac>] (kernel_init+0x8/0xe8)
[<c063ecac>] (kernel_init) from [<c000f7d0>] (ret_from_fork+0x14/0x24)
This patch replaces mutex_lock with mutex_lock_nested() and uses
recursion depth to annotate each genpd->lock operation with separate
lockdep subclass.
Reported-by: Anand Moon <[email protected]>
Signed-off-by: Marek Szyprowski <[email protected]>
Tested-by: Anand Moon <[email protected]>
Tested-by: Tobias Jakobi <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
* pm-core:
driver core: Avoid NULL pointer dereferences in device_is_bound()
platform: Do not detach from PM domains on shutdown
USB / PM: Allow USB devices to remain runtime-suspended when sleeping
PM / sleep: Go direct_complete if driver has no callbacks
PM / Domains: add setter for dev.pm_domain
device core: add device_is_bound()
|
|
* pm-domains:
PM / Domains: export symbols to add/remove devices from genpd
|
|
* pm-opp:
PM / OPP: Use snprintf() instead of sprintf()
PM / OPP: Set cpu_dev->id in cpumask first
PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties
PM / OPP: Parse 'opp-<prop>-<name>' bindings
PM / OPP: Parse 'opp-supported-hw' binding
PM / OPP: Add missing doc comments
ARM: dts: exynos4412: Rename OPP nodes as opp@<opp-hz>
PM / OPP: Rename OPP nodes as opp@<opp-hz>
PM / OPP: Remove 'operating-points-names' binding
PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding
PM / OPP: Add "opp-supported-hw" binding
PM / OPP: Add debugfs support
|
|
* pm-pci:
PCI / PM: Fix small typo in documentation
PCI / PM: constify pci_platform_pm_ops structure
* pm-core:
PM / core: fix typo in documentation
PM / runtime: Add new helper for conditional usage count incrementation
MAINTAINERS: Add an entry for the PM core
PM / runtime: Re-init runtime PM states at probe error and driver unbind
PM / sleep: prohibit devices probing during suspend/hibernation
|
|
* acpi-soc:
PM / clk: don't leave clocks enabled when driver not bound
i2c: dw: Add APM X-Gene ACPI I2C device support
ACPI / APD: Add APM X-Gene ACPI I2C device support
ACPI / LPSS: change 'does not have' to 'has' in comment
Revert "dmaengine: dw: platform: provide platform data for Intel"
dmaengine: dw: return immediately from IRQ when DMA isn't in use
dmaengine: dw: platform: power on device on shutdown
ACPI / LPSS: override power state for LPSS DMA device
ACPI / LPSS: power on when probe() and otherwise when remove()
ACPI / LPSS: do delay for all LPSS devices when D3->D0
ACPI / LPSS: allow to use specific PM domain during ->probe()
Revert "ACPI / LPSS: allow to use specific PM domain during ->probe()"
device core: add BUS_NOTIFY_DRIVER_NOT_BOUND notification
x86/platform/iosf_mbi: Remove duplicate definitions
Conflicts:
drivers/i2c/busses/i2c-designware-platdrv.c
|
|
If a suitable prepare callback cannot be found for a given device and
its driver has no PM callbacks at all, assume that it can go direct to
complete when the system goes to sleep.
The reason for this is that there's lots of devices in a system that do
no PM at all and there's no reason for them to prevent their ancestors
to do direct_complete if they can support it.
Signed-off-by: Tomeu Vizoso <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Adds a function that sets the pointer to dev_pm_domain in struct device
and that warns if the device has already finished probing. The reason
why we want to enforce that is because in the general case that can
cause problems and also that we can simplify code quite a bit if we can
always assume that.
This patch also changes all current code that directly sets the
dev.pm_domain pointer.
Signed-off-by: Tomeu Vizoso <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
|