aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)AuthorFilesLines
2022-01-05ata: pata_cypress: convert printk() callsHannes Reinecke1-1/+1
Convert printk() calls to structured logging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pata_cs5536: convert printk() callsHannes Reinecke1-2/+2
Convert printk() calls to structured logging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pata_cs5520: convert printk() callsHannes Reinecke1-2/+2
Convert printk() calls to structured logging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pata_cmd64x: convert printk() callsHannes Reinecke1-2/+2
Convert printk() calls to structured logging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pata_cmd640: convert printk() callsHannes Reinecke1-1/+1
Convert printk() calls to structured logging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pata_atp867x: convert printk() callsHannes Reinecke1-55/+50
Convert printk() calls to structured logging. [Damien] Fix ata_port_dbg() format in atp867x_check_ports() to avoid compile warnings with 32-bits arch. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: remove debug compilation switchesHannes Reinecke3-3/+0
Unused now, so remove and drop any references to them. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: drop ata_msg_drv()Hannes Reinecke2-15/+7
Callers are already protected by ata_dev_print_info(), so no need to have an additional configuration parameter here. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: drop ata_msg_info()Hannes Reinecke1-7/+3
Convert the sole caller to ata_dev_dbg() and remove the definition. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: drop ata_msg_probe()Hannes Reinecke3-33/+14
All callsites have been converted to dynamic debugging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: drop ata_msg_warn()Hannes Reinecke1-11/+8
The WARN level was always enabled, so drop ata_msg_warn(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: drop ata_msg_malloc()Hannes Reinecke1-1/+1
Unused. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: drop ata_msg_ctl()Hannes Reinecke1-5/+2
The one caller have been converted to dynamic debugging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: drop ata_msg_error() and ata_msg_intr()Hannes Reinecke1-3/+3
Unused. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_sx4: add module parameter 'dimm_test'Hannes Reinecke1-20/+14
Add module parameter 'dimm_test' to enable DIMM testing during startup. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_sx4: Drop pointless VPRINTK() calls and convert the remaining onesHannes Reinecke1-71/+34
Drop pointless VPRINTK() calls for setting up SG tables and convert the remaining calls to structured logging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_sil: Drop pointless VPRINTK() callsHannes Reinecke1-1/+0
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_fsl: convert VPRINTK() calls to ata_port_dbg()Hannes Reinecke1-47/+33
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_nv: drop pointless VPRINTK() calls and convert remaining onesHannes Reinecke1-24/+14
Quite some information from the VPRINTK() is already covered by tracepoints, so remove the pointless calls and convert the remaining ones to structured logging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_mv: Drop pointless VPRINTK() call and convert the remaining oneHannes Reinecke1-6/+1
Drop pointless VPRINTK() call and convert the remaining one to dev_dbg(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_inic162x: Drop pointless VPRINTK() callsHannes Reinecke1-2/+0
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_rcar: Drop pointless VPRINTK() callsHannes Reinecke1-16/+1
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_qstor: Drop pointless VPRINTK() callsHannes Reinecke1-11/+0
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_promise: Drop pointless VPRINTK() calls and convert the remaining onesHannes Reinecke1-23/+8
Drop pointless VPRINTK() calls for entering and existing interrupt routines and convert the remaining calls to ata_port_dbg(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pata_via: Drop pointless VPRINTK() callsHannes Reinecke1-12/+0
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pata_octeon_cf: Drop pointless VPRINTK() calls and convert the ↵Hannes Reinecke1-21/+1
remaining one Drop pointless VPRINTK() calls and convert the remaining calls to the existing bmdma tracepoint. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pdc_adma: Drop pointless VPRINTK() calls and remove disabled NCQ debuggingHannes Reinecke1-29/+2
Drop pointless VPRINTK() calls for entering routines and setting up sg tables. And while we're at it, remove the disabled debugging messages. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: ahci: Drop pointless VPRINTK() calls and convert the remaining onesHannes Reinecke3-21/+5
Drop pointless VPRINTK() calls for entering and existing interrupt routines and convert the remaining calls to dev_dbg(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: remove pointless VPRINTK() callsHannes Reinecke5-52/+0
Most of the information is already covered by tracepoints (if not downright pointless), so remove the VPRINTK() calls. And while we're at it, remove ata_scsi_dump_cdb(), too, as this information can be retrieved from scsi tracing. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pata_pdc2027x: Replace PDPRINTK() with standard ata loggingHannes Reinecke1-43/+28
Use standard ata logging macros instead of the hand-crafted PDPRINTK and remove duplicate logging messages. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_qstor: replace DPRINTK() with dev_dbg()Hannes Reinecke1-2/+2
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_rcar: replace DPRINTK() with ata_port_dbg()Hannes Reinecke1-1/+1
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_fsl: move DPRINTK to ata debuggingHannes Reinecke1-44/+39
Replace all DPRINTK calls with the ata_XXX_dbg functions. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pdc_adma: Remove DPRINTK callHannes Reinecke1-2/+0
The DPRINTK call doesn't print information which isn't already covered by tracepoints later on. Remove it. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: pata_octeon_cf: remove DPRINTK() macro in interrupt contextHannes Reinecke1-2/+0
There is only so much information to be glanced when the interrupt routine is called and exited, so remove these DPRINTK() calls. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_mv: replace DPRINTK with dynamic debuggingHannes Reinecke1-38/+38
Move the DPRINTK calls over to dynamic debugging. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: sata_mv: kill 'port' argument in mv_dump_all_regs()Hannes Reinecke1-13/+6
Always '-1', so drop it and simplify the function. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: move DPRINTK to ata debuggingHannes Reinecke1-9/+6
Replace all DPRINTK calls with ata_dev_dbg(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: revamp ata_get_cmd_descript()Hannes Reinecke3-17/+11
Rename ata_get_cmd_descrip() to ata_get_cmd_name() and simplify it to return "unknown" instead of NULL. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macrosHannes Reinecke3-86/+29
Use standard pr_{debug,info,notice,warn,err} macros instead of the hand-crafted printk helpers. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: add tracepoints for ATA error handlingHannes Reinecke3-30/+7
Add tracepoints for ATA error handling. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata-scsi: drop DPRINTK calls for cdb translationHannes Reinecke1-19/+1
Drop DPRINTK calls for cdb translation as they are already covered by other traces, and also drop the DPRINTK calls in ata_scsi_hotplug(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata-sff: tracepoints for HSM state machineHannes Reinecke2-13/+36
Add tracepoints for the HSM state machine and drop DPRINTK calls Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-05ata: libata: tracepoints for bus-master DMAHannes Reinecke11-97/+76
Add tracepoints for bus-master DMA and taskfile related functions. That allows us to drop the relevant DPRINTK() calls. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: add qc_prep tracepointHannes Reinecke1-0/+1
Convert the existing ata_qc_issue() tracepoint into a template, and add tracepoints for ata_qc_prep() and ata_qc_issue() based on that template. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: add reset tracepointsHannes Reinecke10-57/+19
To follow the flow of control we should be using tracepoints, as they will tie in with the actual I/O flow and deliver a better overview about what it happening. This patch adds tracepoints for hard reset, soft reset, and postreset and adds them in the libata-eh control flow. With that we can drop the reset DPRINTK calls in the various drivers. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: sanitize ATA_HORKAGE_DUMP_IDHannes Reinecke1-2/+2
With moving ata_dev_dbg() over to dynamic debugging ATA_HORKAGE_DUMP_ID will now print out the raw IDENTIFY data without a header unless explicitly enable via dyndebug. So move the logging level up to INFO and have the header printed always. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: move ata_dump_id() to dynamic debuggingHannes Reinecke1-28/+10
Use ata_dev_dbg() to print out the information in ata_dump_id() and remove the ata_msg_probe() conditional. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: Add ata_port_classify() helperHannes Reinecke7-21/+40
Add an ata_port_classify() helper to print out the results from the device classification and remove the debugging statements from ata_dev_classify(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-01-04ata: libata: whitespace cleanupHannes Reinecke2-10/+10
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Powered by cgit, Gruvboxed by Blaster4385.