| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In lpit_update_residency() there is a possibility of overflow
in multiplication, if tsc_khz is large enough (> UINT_MAX/1000).
Change multiplication to mul_u32_u32().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: eeb2d80d502a ("ACPI / LPIT: Add Low Power Idle Table (LPIT) support")
Signed-off-by: Nikita Kiryushin <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Commit 0a0e2ea642f6 ("ACPI: processor: Move MWAIT quirk out of
acpi_processor.c") added acpi_proc_quirk_mwait_check() that is
only defined for x86 and is unlikely to be defined for any other
architectures, so put it under #ifdef CONFIG_X86 and provide
an empty stub implementation of it for the other cases.
This is kind of orthogonal to [1], because if any architectures other
than x86 decide to use the processor _OSC, they will see the reported
build error.
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git/commit/?h=remove-ia64&id=a0334bf78b95532cec54f56b53e8ae1bfe7e1ca1 # [1]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Add support of "Thermal fast Sampling Period (_TFP)" for passive
cooling.
As per the ACPI specification (ACPI 6.5, Section 11.4.17 "_TFP (Thermal
fast Sampling Period)", _TFP overrides _TSP ("Thermal Sampling Period"
if both are present in a Thermal zone.
Signed-off-by: Jeff Brasen <[email protected]>
Co-developed-by: Sumit Gupta <[email protected]>
Signed-off-by: Sumit Gupta <[email protected]>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Vendor-Defined Error types are supported by the platform apart from
standard error types if bit 31 is set in the output of GET_ERROR_TYPE
Error Injection Action.[1] While the errors themselves and the length
of their associated "OEM Defined data structure" might vary between
vendors, the physical address of this structure can be computed through
vendor_extension and length fields of "SET_ERROR_TYPE_WITH_ADDRESS" and
"Vendor Error Type Extension" Structures respectively.[2][3]
Currently, however, the einj module only computes the physical address of
Vendor Error Type Extension Structure. Neither does it compute the physical
address of OEM Defined structure nor does it establish the memory mapping
required for injecting Vendor-defined errors. Consequently, userspace
tools have to establish the very mapping through /dev/mem, nopat kernel
parameter and system calls like mmap/munmap initially before injecting
Vendor-defined errors.
Circumvent the issue by computing the physical address of OEM Defined data
structure and establishing the required mapping with the structure. Create
a new file "oem_error", if the system supports Vendor-defined errors, to
export this mapping, through debugfs_create_blob(). Userspace tools can
then populate their respective OEM Defined structure instances and just
write to the file as part of injecting Vendor-defined Errors. Similarly,
the tools can also read from the file if the system firmware provides some
information through the OEM defined structure after error injection.
[1] ACPI specification 6.5, section 18.6.4
[2] ACPI specification 6.5, Table 18.31
[3] ACPI specification 6.5, Table 18.32
Suggested-by: Yazen Ghannam <[email protected]>
Signed-off-by: Avadhut Naik <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Reviewed-by: Borislav Petkov (AMD) <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
OSPM can discover the error injection capabilities of the platform by
executing GET_ERROR_TYPE error injection action.[1] The action returns
a DWORD representing a bitmap of platform supported error injections.[2]
The available_error_type_show() function determines the bits set within
this DWORD and provides a verbose output, from einj_error_type_string
array, through /sys/kernel/debug/apei/einj/available_error_type file.
The function however, assumes one to one correspondence between an error's
position in the bitmap and its array entry offset. Consequently, some
errors like Vendor Defined Error Type fail this assumption and will
incorrectly be shown as not supported, even if their corresponding bit is
set in the bitmap and they have an entry in the array.
Navigate around the issue by converting einj_error_type_string into an
array of structures with a predetermined mask for all error types
corresponding to their bit position in the DWORD returned by GET_ERROR_TYPE
action. The same breaks the aforementioned assumption resulting in all
supported error types by a platform being outputted through the above
available_error_type file.
[1] ACPI specification 6.5, Table 18.25
[2] ACPI specification 6.5, Table 18.30
Suggested-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Avadhut Naik <[email protected]>
Reviewed-by: Borislav Petkov (AMD) <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
If acpi_get_parent() called in acpi_video_dev_register_backlight()
fails, for example, because acpi_ut_acquire_mutex() fails inside
acpi_get_parent), this can lead to incorrect (uninitialized)
acpi_parent handle being passed to acpi_get_pci_dev() for detecting
the parent pci device.
Check acpi_get_parent() result and set parent device only in case of success.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9661e92c10a9 ("acpi: tie ACPI backlight devices to PCI devices if possible")
Signed-off-by: Nikita Kiryushin <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The recently merged DisCo for Imaging support used a wrong printk
specifier in printing a message. Fix it by using %zu instead of %lu.
Also use "bits" instead of "bytes" as these are indeed bytes.
Fixes: a6cb0a611273 ("ACPI: scan: Extract MIPI DisCo for Imaging data into swnodes")
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Modify the ACPI thermal driver to use functions from the ACPI thermal
library to obtain trip point temperature values instead of duplicating
them locally.
Among other things, this requires the functions in question to be
exported to it, because it can be built as a module.
It effectively changes the behavior of the driver to treat temperature
values out of the reasonable range (-55 centigrade to 175 centigrade) as
invalid, but there is no other expected functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Because the ACPI thermal driver generally operates temperature values
in deci-Kelvin, it needs the library functions returning temperature
for various trip point types to use deci-Kelvin too.
To address that, arrange the ACPI thermal library code in three levels
of functions where the high-level ones will return temperature in
milli-Celsius, as needed by the thermal core and the majority of
thermal drivers, the mid-level ones will return temperature in
deci-Kelvin and will be called internally by the corresponding high-
level functions, and all of the mid-level functions will call the same
low-level one, acpi_trip_temp(), to actually evaluate ACPI objects to
retrieve themperature values from the platform firmware.
Going forward, this will allow the ACPI thermal driver to use the
mid-level functions to provide temperature values needed by it, so as
to reduce code duplication related to evaluating trip temperature ACPI
control methods.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The ACPI thermal library contains functions that can be used to
retrieve trip point temperature values through the platform firmware
for various types of trip points. Each of these functions basically
evaluates a specific ACPI object, checks if the value produced by it
is reasonable and returns it (or THERMAL_TEMP_INVALID if anything
fails).
It made sense to hold it in drivers/thermal/ so long as it was only used
by the code in that directory, but since it is also going to be used by
the ACPI thermal driver located in drivers/acpi/, move it to the latter
in order to keep the code related to evaluating ACPI objects defined in
the specification proper together.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The platform can deny certain tunneling from the OS and it does that by
clearing the control bits it does not want the OS to get and returning
with OSC_CAPABILITIES_MASK_ERROR bit set. Currently we do not handle
this properly so if this happens, for example when the platform denies
PCIe tunneling, we just fail the whole negotiation and revert back to
what the Thunderbolt driver is doing to figure out whether the
controller is running firmware connection manager or not. However, we
should honor what the platform returns.
For this reason run the USB4 _OSC() first with query bit set, and then
use the returned control double word (that may contain some of the bits
cleared by the platform) and run it second time with query bit clear.
While there, remove an extra space from the assignment of the control
double word.
Reported-by: NaamaX Shachar <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Since commit 3dbc80a3e4c5 ("ACPI: video: Make backlight class device
registration a separate step (v2)") acpi_video# backlights are no longer
automatically registered. Instead they now only get registered when
the GPU/KMS driver calls acpi_video_register_backlight() which it only
does when it has detected an internal LCD panel.
This fixes the issue of sometimes a non-working acpi_video# backlight
showing up on Desktops / HDMI-sticks without an internal LCD display
in a more complete and robust manner then the LCD flag check which
gets enabled by the should_check_lcd_flag() helper does.
Therefor the should_check_lcd_flag() helper is no longer necessary.
The lcd_only flag itself is still necessary to only register
a single backlight device (for the right output) on the ESPRIMO Mobile
M9410 which has 2 ACPI video connector nodes with a _BCM control method,
which is the issue for which the flag was originally introduced in
commit e50b9be14ab0 ("ACPI / video: only register backlight for LCD
device").
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Like various other ASUS ExpertBook-s, the ASUS ExpertBook B1402CVA
has an ACPI DSDT table that describes IRQ 1 as ActiveLow while
the kernel overrides it to EdgeHigh.
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218114
Cc: All applicable <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Commit 89c290ea7589 ("ACPI: video: Put ACPI video and its child devices
into D0 on boot") introduced calling acpi_device_fix_up_power_extended()
on the video card for which the ACPI video bus is the companion device.
This unnecessarily touches the power-state of the GPU itself, while
the issue it tries to address only requires calling _PS0 on the child
devices.
Touching the power-state of the GPU itself is causing suspend / resume
issues on e.g. a Lenovo ThinkPad W530.
Instead use acpi_device_fix_up_power_children(), which only touches
the child devices, to fix this.
Fixes: 89c290ea7589 ("ACPI: video: Put ACPI video and its child devices into D0 on boot")
Reported-by: Owen T. Heisler <[email protected]>
Closes: https://lore.kernel.org/regressions/[email protected]/
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/273
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218124
Tested-by: Kai-Heng Feng <[email protected]>
Tested-by: Owen T. Heisler <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Cc: 6.6+ <[email protected]> # 6.6+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
In some cases it is necessary to fix-up the power-state of an ACPI
device's children without touching the ACPI device itself add
a new acpi_device_fix_up_power_children() function for this.
Signed-off-by: Hans de Goede <[email protected]>
Cc: 6.6+ <[email protected]> # 6.6+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Xen HVM guests were observed taking triple-faults when attempting to
online a previously offlined vCPU.
Investigation showed that the fault was coming from a failing call
to lockdep_assert_irqs_disabled(), in load_current_idt() which was
too early in the CPU bringup to actually catch the exception and
report the failure cleanly.
This was a false positive, caused by acpi_idle_play_dead() setting
the per-cpu hardirqs_enabled flag by calling safe_halt(). Switch it
to use raw_safe_halt() instead, which doesn't do so.
Signed-off-by: David Woodhouse <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: 6.6+ <[email protected]> # 6.6+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
MIPI DisCo for Imaging defines properties for camera sensors that
functionally align with DT equivalents.
Replicate these properties in the ACPI device swnodes so the code
using the corresponding DT properties already does not need to be
updated to deal with their MIPI counterparts directly.
The replicated properties are:
"mipi-img-clock-frequency" -> "clock-frequency"
"mipi-img-led-max-current" -> "led-max-microamp"
"mipi-img-flash-max-current" -> "flash-max-microamp"
"mipi-img-flash-max-timeout" -> "flash-max-timeout-us"
Signed-off-by: Sakari Ailus <[email protected]>
[ rjw: Changelog edits, removal of redundant braces ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Sakari Ailus <[email protected]>
|
|
Find the "rotation" property value for devices with _CRS CSI-2 resource
descriptors and use it to add the "rotation" property to the software
nodes representing the CSI-2 connection graph. That value typically
comes from the _PLD (Physical Location of Device) object if it is
present for the given device.
This way, camera sensor drivers that know the "rotation" property do not
need to care about _PLD on systems using ACPI.
Signed-off-by: Sakari Ailus <[email protected]>
[ rjw: Changelog edits, file rename ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Sakari Ailus <[email protected]>
|
|
Add information extracted from the MIPI DisCo for Imaging device
properties to software nodes created during the CSI-2 connection graph
discovery.
Link: https://www.mipi.org/specifications/mipi-disco-imaging
Co-developed-by: Sakari Ailus <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Sakari Ailus <[email protected]>
|
|
Use the connection information extracted from the _CRS CSI-2 resource
descriptors for all devices that have them to populate port names and the
"reg", "bus-type" and "remote-endpoint" properties in the software nodes
representing the CSI-2 connection graph.
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#camera-serial-interface-csi-2-connection-resource-descriptor
Co-developed-by: Sakari Ailus <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Sakari Ailus <[email protected]>
|
|
Find ACPI CSI-2 resource descriptors defined since ACPI 6.4 (for
CSI-2 and camera configuration) in _CRS for all device objects in
the given scope of the ACPI namespace that have them, identify the
corresponding "remote endpoint" device objects for them and
allocate memory for software nodes needed to create a DT-like data
structure representing the CSI-2 connection graph for drivers.
The code needed to populate these software nodes will be added by
subsequent change sets.
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#camera-serial-interface-csi-2-connection-resource-descriptor
Co-developed-by: Sakari Ailus <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Sakari Ailus <[email protected]>
|
|
In order to allow referencing data nodes directly, which is not possible
currently, add support for representing references in device properties
as strings (relative or absolute name paths). For example, after this
change, the "mipi-img-flash-leds" property in the ASL snippet below will
be treated as a proper reference to the LED0 object under LEDD.
Package ()
{
"mipi-img-flash-leds", "\\_SB.PCI0.I2C2.LEDD.LED0",
}
Device (LEDD)
{
Name (_DSD, Package () // _DSD: Device-Specific Data
{
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), /* Hierarchical Data Extension */,
Package ()
{
Package ()
{
"mipi-img-flash-led-0",
"LED0",
}
},
})
Name (LED0, Package () // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties */,
Package ()
{
Package ()
{
"mipi-img-max-current",
1000000,
}
}
})
}
Also remove the mechanism allowing data nodes to be referenced
indirectly, with the help of an object reference pointing to the
"ancestor" device and a path relative to it (this mechanism is not
expected to be in use in any production platform firmware in the field).
Note that this change allows also using strings for referencing device
objects, in addition to object references that have been supported
already.
While at it, add pr_fmt() macro to prefix printouts and update
copyright.
Co-developed-by: Sakari Ailus <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Sakari Ailus <[email protected]>
|
|
The I2C-core already has filtering to skip i2c_client instantiation for
LNXVIDEO acpi_device-s with I2cSerialBus resources, since LNXVIDEO devices
are not i2c_client-s and are handled by the acpi_video driver.
This filtering was added to i2c-core-acpi.c in commit 3a4991a9864c ("i2c:
acpi: Do not create i2c-clients for LNXVIDEO ACPI devices").
Now a similar problem has shown up where the SPI-core is instantiating
an unwanted SPI-device for a SpiSerialBus resource under a LNXVIDEO
acpi_device. On a Lenovo Yoga Tab 3 YT3-X90F this unwanted SPI-device
instanstantiation causes the SPI-device instanstantiation for the WM5102
audio codec to fail with:
[ 21.988441] pxa2xx-spi 8086228E:00: chipselect 0 already in use
Instead of duplicating the I2C-core filtering in the SPI-core code, push
the filtering of SerialBus resources under LNXVIDEO acpi_device-s up into
the ACPI-core by adding the LNXVIDEO HID to ignore_serial_bus_ids[].
Note the filtering in the I2C-core i2c_acpi_do_lookup() function is still
necessary because this not only impacts i2c_client instantiation but it
also makes the I2C-core ignore the I2cSerialBus resource when checking what
the maximum speed is the I2C bus supports, which is still necessary.
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for cbo.zero in userspace
- Support for CBOs on ACPI-based systems
- A handful of improvements for the T-Head cache flushing ops
- Support for software shadow call stacks
- Various cleanups and fixes
* tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
RISC-V: hwprobe: Fix vDSO SIGSEGV
riscv: configs: defconfig: Enable configs required for RZ/Five SoC
riscv: errata: prefix T-Head mnemonics with th.
riscv: put interrupt entries into .irqentry.text
riscv: mm: Update the comment of CONFIG_PAGE_OFFSET
riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause
riscv/mm: Fix the comment for swap pte format
RISC-V: clarify the QEMU workaround in ISA parser
riscv: correct pt_level name via pgtable_l5/4_enabled
RISC-V: Provide pgtable_l5_enabled on rv32
clocksource: timer-riscv: Increase rating of clock_event_device for Sstc
clocksource: timer-riscv: Don't enable/disable timer interrupt
lkdtm: Fix CFI_BACKWARD on RISC-V
riscv: Use separate IRQ shadow call stacks
riscv: Implement Shadow Call Stack
riscv: Move global pointer loading to a macro
riscv: Deduplicate IRQ stack switching
riscv: VMAP_STACK overflow detection thread-safe
RISC-V: cacheflush: Initialize CBO variables on ACPI systems
RISC-V: ACPI: RHCT: Add function to get CBO block sizes
...
|
|
Pull CXL (Compute Express Link) updates from Dan Williams:
"The main new functionality this time is work to allow Linux to
natively handle CXL link protocol errors signalled via PCIe AER for
current generation CXL platforms. This required some enlightenment of
the PCIe AER core to workaround the fact that current generation RCH
(Restricted CXL Host) platforms physically hide topology details and
registers via a mechanism called RCRB (Root Complex Register Block).
The next major highlight is reworks to address bugs in parsing region
configurations for next generation VH (Virtual Host) topologies. The
old broken algorithm is replaced with a simpler one that significantly
increases the number of region configurations supported by Linux. This
is again relevant for error handling so that forward and reverse
address translation of memory errors can be carried out by Linux for
memory regions instantiated by platform firmware.
As for other cross-tree work, the ACPI table parsing code has been
refactored for reuse parsing the "CDAT" structure which is an
ACPI-like data structure that is reported by CXL devices. That work is
in preparation for v6.8 support for CXL QoS. Think of this as dynamic
generation of NUMA node topology information generated by Linux rather
than platform firmware.
Lastly, a number of internal object lifetime issues have been resolved
along with misc. fixes and feature updates (decoders_committed sysfs
ABI).
Summary:
- Add support for RCH (Restricted CXL Host) Error recovery
- Fix several region assembly bugs
- Fix mem-device lifetime issues relative to the sanitize command and
RCH topology.
- Refactor ACPI table parsing for CDAT parsing re-use in preparation
for CXL QOS support"
* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
lib/fw_table: Remove acpi_parse_entries_array() export
cxl/pci: Change CXL AER support check to use native AER
cxl/hdm: Remove broken error path
cxl/hdm: Fix && vs || bug
acpi: Move common tables helper functions to common lib
cxl: Add support for reading CXL switch CDAT table
cxl: Add checksum verification to CDAT from CXL
cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
cxl: Add decoders_committed sysfs attribute to cxl_port
cxl: Add cxl_decoders_committed() helper
cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
cxl/pci: Disable root port interrupts in RCH mode
cxl/pci: Add RCH downstream port error logging
cxl/pci: Map RCH downstream AER registers for logging protocol errors
cxl/pci: Update CXL error logging to use RAS register address
PCI/AER: Refactor cper_print_aer() for use by CXL driver module
cxl/pci: Add RCH downstream port AER register discovery
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix the acpi_thermal_add() error path that may do a double-free in
some cases after recent changes (Dan Carpenter)"
* tag 'acpi-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Fix acpi_thermal_unregister_thermal_zone() cleanup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/[email protected]/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"No major architecture features this time around, just some new HWCAP
definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.
The bulk of the changes is reworking of the CPU capability checking
code (cpus_have_cap() etc).
- Major refactoring of the CPU capability detection logic resulting
in the removal of the cpus_have_const_cap() function and migrating
the code to "alternative" branches where possible
- Backtrace/kgdb: use IPIs and pseudo-NMI
- Perf and PMU:
- Add support for Ampere SoC PMUs
- Multi-DTC improvements for larger CMN configurations with
multiple Debug & Trace Controllers
- Rework the Arm CoreSight PMU driver to allow separate
registration of vendor backend modules
- Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
driver; use device_get_match_data() in the xgene driver; fix
NULL pointer dereference in the hisi driver caused by calling
cpuhp_state_remove_instance(); use-after-free in the hisi driver
- HWCAP updates:
- FEAT_SVE_B16B16 (BFloat16)
- FEAT_LRCPC3 (release consistency model)
- FEAT_LSE128 (128-bit atomic instructions)
- SVE: remove a couple of pseudo registers from the cpufeature code.
There is logic in place already to detect mismatched SVE features
- Miscellaneous:
- Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
bouncing is needed. The buffer is still required for small
kmalloc() buffers
- Fix module PLT counting with !RANDOMIZE_BASE
- Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
synchronisation code out of the set_ptes() loop
- More compact cpufeature displaying enabled cores
- Kselftest updates for the new CPU features"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
arm64/mm: Hoist synchronization out of set_ptes() loop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add a kselftest to check for unprobed DT devices
- Fix address translation for some 3 address cells cases
- Refactor firmware node refcounting for AMBA bus
- Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and
Freescale QMC HDLC
- Add Marantec vendor prefix
- Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and
atmel,at91rm9200-wdt bindings to DT schema
- Several additionalProperties/unevaluatedProperties on child node
schemas fixes
- Drop reserved-memory bindings which now live in dtschema project
- Fix a reference to rockchip,inno-usb2phy.yaml
- Remove backlight nodes from display panel examples
- Expand example for using DT_SCHEMA_FILES
- Merge simple LVDS panel bindings to one binding doc
* tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name
dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes
dt-bindings: arm,coresight-cti: Drop type for 'cpu' property
dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema
dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit
media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/
of: address: Consolidate bus .map() functions
of: address: Store number of bus flag cells rather than bool
of: unittest: Add tests for address translations
of: address: Remove duplicated functions
of: address: Fix address translation when address-size is greater than 2
dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml
dt-bindings: watchdog: da9062-wdt: convert txt to yaml
dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl
dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml
dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix issues, add new quirks, rearrange the IRQ override quirk
definitions, add new helpers and switch over code to using them,
rework a couple of interfaces to be more flexible, eliminate strncpy()
usage from PNP, extend the ACPI PCC mailbox driver and clean up code.
This is based on ACPI thermal driver changes that are present in the
thermal control updates for 6.7-rc1 pull request (they are depended on
by the ACPI utilities updates). However, the ACPI thermal driver
changes are not included in the list of specific ACPI changes below.
Specifics:
- Add symbol definitions related to CDAT to the ACPICA code (Dave
Jiang)
- Use the acpi_device_is_present() helper in more places and rename
acpi_scan_device_not_present() to be about enumeration (James
Morse)
- Add __printf format attribute to acpi_os_vprintf() (Su Hui)
- Clean up departures from kernel coding style in the low-level
interface for ACPICA (Jonathan Bergh)
- Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt)
- Fail FPDT parsing on zero length records and add proper handling
for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick)
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki)
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh)
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede)
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach)
- Allow _DSD buffer data only for byte accessors and document the
_DSD data buffer GUID (Andy Shevchenko)
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav)
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary)
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets
(Hans de Goede)
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede)
- Annotate struct prm_module_info with __counted_by (Kees Cook)
- Fix AER info corruption in aer_recover_queue() when error status
data has multiple sections (Shiju Jose)
- Make APEI use ERST maximum execution time for slow devices (Jeshua
Smith)
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li)
- Define common macros to use when referring to various bitfields in
the PCC generic communications channel command and status fields
and use them in some drivers (Sudeep Holla)
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose)
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET)
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav)
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav)
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki)
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki)
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski)
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt)
- Clean up coding style in pnp.h (GuoHua Cheng)"
* tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
ACPI: resource: Do IRQ override on TongFang GMxXGxx
perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
ACPI: x86: use acpi_dev_uid_match() for matching _UID
ACPI: utils: use acpi_dev_uid_match() for matching _UID
pinctrl: intel: use acpi_dev_uid_match() for matching _UID
ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
ACPI: acpi_pad: Rename ACPI device from device to adev
ACPI: acpi_pad: Use dev groups for sysfs
ACPI: acpi_pad: Replace acpi_driver with platform_driver
ACPI: APEI: Use ERST timeout for slow devices
ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration
PNP: replace deprecated strncpy() with memcpy()
PNP: ACPI: replace deprecated strncpy() with strscpy()
perf: qcom: use acpi_device_uid() for fetching _UID
ACPI: sysfs: use acpi_device_uid() for fetching _UID
ACPI: scan: Use the acpi_device_is_present() helper in more places
ACPI: AC: Rename ACPI device from device to adev
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These further rework the ACPI thermal driver, after the changes made
to it in the previous cycle, to make it easier to grasp, get rid of
redundant pieces of internal data structures and eliminate its
reliance on a specific ordering of trip point objects in the thermal
core, make thermal core adjustments needed for the ACPI thermal driver
rework, modify the thermal governor interface so as to use trip
pointers for representing trip points in it, switch over multiple
thermal drivers to using void platform driver remove callbacks, add
support for 2 hardware features to the Intel int340x thermal driver,
add support for new hardware on ARM platforms, update documentation,
fix problems, clean up code and update the MAINTAINERS record for
thermal control.
Specifics:
- Untangle the initialization and updates of passive and active trip
points in the ACPI thermal driver (Rafael Wysocki)
- Reduce code duplication related to the initialization and updates
of trip points in the ACPI thermal driver (Rafael Wysocki)
- Use trip pointers for cooling device binding in the ACPI thermal
driver (Rafael Wysocki)
- Simplify critical and hot trips representation in the ACPI thermal
driver (Rafael Wysocki)
- Use trip pointers in thermal governors and in the related part of
the thermal core (Rafael Wysocki)
- Drop the trips_disabled bitmask that has become redundant from the
thermal core (Rafael Wysocki)
- Avoid updating trip points when the thermal zone temperature falls
into a trip point's hysteresis range (ícolas F. R. A. Prado)
- Add power floor notifications support to the int340x thermal
control driver (Srinivas Pandruvada)
- Rework updating trip points in the int340x thermal driver so that
it does not access thermal zone internals directly (Rafael
Wysocki)
- Use param_get_byte() instead of param_get_int() as the max_idle
module parameter .get() callback in the Intel powerclamp thermal
driver to avoid possible out-of-bounds access (David Arcari)
- Add workload hints support to the int340x thermal driver (Srinivas
Pandruvada)
- Add support for Mediatek LVTS MT8192 along with suspend/resume
routines (Balsam Chihi)
- Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
Schneider-Pargmann)
- Remove duplicate error message from the max76620 driver when
thermal_of_zone_register() fails (Thierry Reding)
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein)
- Add sa8775p compatible to the QCom tsens driver (Priyansh Jain)
- Fix error check in lvts_debugfs_init() to be against PTR_ERR() in
the LVTS Mediatek driver (Minjie Du)
- Remove unused variable in thermal/tools (Kuan-Wei Chiu)
- Document the imx8dl thermal sensor (Fabio Estevam)
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel)
- Add missing unevaluatedProperties on child node schemas for
tegra124 (Rob Herring)
- Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)"
* tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits)
thermal: ACPI: Include the right header file
thermal: core: Don't update trip points inside the hysteresis range
thermal: core: Pass trip pointer to governor throttle callback
thermal: gov_step_wise: Fold update_passive_instance() into its caller
thermal: gov_power_allocator: Use trip pointers instead of trip indices
thermal: gov_fair_share: Rearrange get_trip_level()
thermal: trip: Define for_each_trip() macro
thermal: trip: Simplify computing trip indices
thermal/qcom/tsens: Drop ops_v0_1
thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
thermal/drivers/mediatek: Fix probe for THERMAL_V2
thermal/drivers/max77620: Remove duplicate error message
dt-bindings: timer: add imx7d compatible
dt-bindings: net: microchip: Allow nvmem-cell usage
dt-bindings: imx-thermal: Add #thermal-sensor-cells property
dt-bindings: thermal: tsens: Add sa8775p compatible
thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
...
|
|
The acpi_thermal_unregister_thermal_zone() is paired with
acpi_thermal_register_thermal_zone() so it should mirror it. It should
clean up all the resources that the register function allocated and
leave the stuff that was allocated elsewhere.
Unfortunately, it doesn't call thermal_zone_device_disable(). Also it
calls kfree(tz->trip_table) when it shouldn't. That was allocated in
acpi_thermal_add(). Putting the kfree() here leads to a double free
in the acpi_thermal_add() clean up function.
Likewise, the acpi_thermal_remove() should mirror acpi_thermal_add() so
it should have an explicit kfree(tz->trip_table) as well.
Fixes: ec23c1c462de ("ACPI: thermal: Use trip point table to register thermal zones")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm handling updates from Ingo Molnar:
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency
reduction efforts
- Misc cleanups & fixes
* tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size
selftests/x86/lam: Zero out buffer for readlink()
x86/sev: Drop unneeded #include
x86/sev: Move sev_setup_arch() to mem_encrypt.c
x86/tdx: Replace deprecated strncpy() with strtomem_pad()
selftests/x86/mm: Add new test that userspace stack is in fact NX
x86/sev: Make boot_ghcb_page[] static
x86/boot: Move x86_cache_alignment initialization to correct spot
x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach
x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot
x86_64: Show CR4.PSE on auxiliaries like on BSP
x86/iommu/docs: Update AMD IOMMU specification document URL
x86/sev/docs: Update document URL in amd-memory-encryption.rst
x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h>
ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window
x86/numa: Introduce numa_fill_memblks()
|
|
Some of the routines in ACPI driver/acpi/tables.c can be shared with
parsing CDAT. CDAT is a device-provided data structure that is formatted
similar to a platform provided ACPI table. CDAT is used by CXL and can
exist on platforms that do not use ACPI. Split out the common routine
from ACPI to accommodate platforms that do not support ACPI and move that
to /lib. The common routines can be built outside of ACPI if
FIRMWARE_TABLES is selected.
Link: https://lore.kernel.org/linux-cxl/CAJZ5v0jipbtTNnsA0-o5ozOk8ZgWnOg34m34a9pPenTyRLj=6A@mail.gmail.com/
Suggested-by: "Rafael J. Wysocki" <[email protected]>
Reviewed-by: Hanjun Guo <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Acked-by: "Rafael J. Wysocki" <[email protected]>
Link: https://lore.kernel.org/r/169713683430.2205276.17899451119920103445.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <[email protected]>
|
|
Cache Block Operation (CBO) related block size in ACPI is provided by RHCT.
Add support to read the CMO node in RHCT to get this information.
Signed-off-by: Sunil V L <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
acpi_get_rhct() currently returns pointer to acpi_table_header
structure. But since this is specific to RHCT, return pointer to
acpi_table_rhct structure itself.
Suggested-by: Andrew Jones <[email protected]>
Signed-off-by: Sunil V L <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Merge updates of the ACPI AC and ACPI PAD drivers and PNP updates for
6.7-rc1:
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski).
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt).
- Clean up coding style in pnp.h (GuoHua Cheng).
* acpi-ac:
ACPI: AC: Rename ACPI device from device to adev
ACPI: AC: Replace acpi_driver with platform_driver
ACPI: AC: Use string_choices API instead of ternary operator
ACPI: AC: Remove redundant checks
* acpi-pad:
ACPI: acpi_pad: Rename ACPI device from device to adev
ACPI: acpi_pad: Use dev groups for sysfs
ACPI: acpi_pad: Replace acpi_driver with platform_driver
* pnp:
PNP: replace deprecated strncpy() with memcpy()
PNP: ACPI: replace deprecated strncpy() with strscpy()
PNP: Clean up coding style in pnp.h
|
|
Merge ACPI bus type driver updates for 6.7-rc1:
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki).
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki).
* acpi-bus:
ACPI: bus: Add context argument to acpi_dev_install_notify_handler()
ACPI: docs: enumeration: Clarify ACPI bus concepts
|
|
Merge ACPI EC driver updates, ACPI sysfs interface updates, misc updates
related to ACPI and changes related to ACPI _UID handling for 6.7-rc1:
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose).
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET).
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav).
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav).
* acpi-ec:
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
* acpi-sysfs:
ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
* acpi-misc:
ACPI: x86: s2idle: Switch to use acpi_evaluate_dsm_typed()
ACPI: PCI: Switch to use acpi_evaluate_dsm_typed()
* acpi-uid:
perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
ACPI: x86: use acpi_dev_uid_match() for matching _UID
ACPI: utils: use acpi_dev_uid_match() for matching _UID
pinctrl: intel: use acpi_dev_uid_match() for matching _UID
ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
perf: qcom: use acpi_device_uid() for fetching _UID
ACPI: sysfs: use acpi_device_uid() for fetching _UID
|
|
Merge ACPI backlight driver updates, ACPI APEI updates, ACPI PRM updates
and changes related to ACPI PCC for 6.7-rc1:
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary).
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans
de Goede).
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede).
- Annotate struct prm_module_info with __counted_by (Kees Cook).
- Fix AER info corruption in aer_recover_queue() when error status data
has multiple sections (Shiju Jose).
- Make APEI use ERST max execution time value for slow devices (Jeshua
Smith).
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li).
- Define common macros to use when referring to various bitfields in the
PCC generic communications channel command and status fields and use
them in some drivers (Sudeep Holla).
* acpi-video:
ACPI: video: Add acpi_backlight=vendor quirk for Toshiba Portégé R100
ACPI: video: Add "vendor" quirks for 3 Lenovo x86 Android tablets
ACPI: video: Move Xiaomi Mi Pad 2 quirk to its own section
* acpi-prm:
ACPI: PRM: Annotate struct prm_module_info with __counted_by
* acpi-apei:
ACPI: APEI: Use ERST timeout for slow devices
ACPI: APEI: Fix AER info corruption when error status data has multiple sections
* acpi-pcc:
soc: kunpeng_hccs: Migrate to use generic PCC shmem related macros
hwmon: (xgene) Migrate to use generic PCC shmem related macros
i2c: xgene-slimpro: Migrate to use generic PCC shmem related macros
ACPI: PCC: Add PCC shared memory region command and status bitfields
mailbox: pcc: Support shared interrupt for multiple subspaces
mailbox: pcc: Add support for platform notification handling
|
|
Merge ACPI utilities updates, ACPI resource management updates, ACPI
device properties management updates and ACPI LPSS (Intel SoC) driver
update for 6.7-rc1:
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki).
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh).
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede).
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach).
- Allow _DSD buffer data only for byte accessors and document the _DSD
data buffer GUID (Andy Shevchenko).
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav).
* acpi-utils:
ACPI: utils: Remove redundant braces around individual statement
ACPI: utils: Fix up white space in a few places
ACPI: utils: Dynamically determine acpi_handle_list size
ACPI: thermal: Merge trip initialization functions
ACPI: thermal: Collapse trip devices update function wrappers
ACPI: thermal: Collapse trip devices update functions
ACPI: thermal: Add device list to struct acpi_thermal_trip
ACPI: thermal: Fix a small leak in acpi_thermal_add()
ACPI: thermal: Drop valid flag from struct acpi_thermal_trip
ACPI: thermal: Drop redundant trip point flags
ACPI: thermal: Untangle initialization and updates of active trips
ACPI: thermal: Untangle initialization and updates of the passive trip
ACPI: thermal: Simplify critical and hot trips representation
ACPI: thermal: Create and populate trip points table earlier
ACPI: thermal: Determine the number of trip points earlier
ACPI: thermal: Fold acpi_thermal_get_info() into its caller
ACPI: thermal: Simplify initialization of critical and hot trips
* acpi-resource:
ACPI: resource: Do IRQ override on TongFang GMxXGxx
ACPI: resource: Drop .ident values from dmi_system_id tables
ACPI: resource: Consolidate IRQ trigger-type override DMI tables
* acpi-property:
ACPI: property: Document the _DSD data buffer GUID
ACPI: property: Allow _DSD buffer data only for byte accessors
* acpi-soc:
ACPI: LPSS: drop BayTrail and Lynxpoint pinctrl HIDs
|
|
Merge ACPI updates related to device enumeration, low-level interface
for ACPICA (OSL), _OSI handling and table parsing for 6.7-rc1:
- Use the acpi_device_is_present() helper in more places and rename
acpi_scan_device_not_present() to be about enumeration (James Morse).
- Add __printf format attribute to acpi_os_vprintf() (Su Hui).
- Clean up departures from kernel coding style in the low-level
interface for ACPICA (Jonathan Bergh).
- Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt).
- Fail FPDT parsing on zero length records and add proper handling for
fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick).
* acpi-scan:
ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration
ACPI: scan: Use the acpi_device_is_present() helper in more places
* acpi-osl:
ACPI: OSL: Add empty lines after local variable declarations
ACPI: OSL: Remove redundant parentheses in return statements
ACPI: OSL: Fix up white space in parameter lists
ACPI: OSL: add __printf format attribute to acpi_os_vprintf()
* acpi-osi:
ACPI: OSI: refactor deprecated strncpy()
* acpi-tables:
ACPI: FPDT: properly handle invalid FPDT subtables
|
|
The TongFang GMxXGxx/TUXEDO Stellaris/Pollaris Gen5 needs IRQ overriding
for the keyboard to work.
Adding an entry for this laptop to the override_table makes the internal
keyboard functional.
Signed-off-by: Werner Sembach <[email protected]>
Cc: All applicable <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
|
|
Add GPE quirk entry for HP 250 G7 Notebook PC.
This change allows the lid switch to be identified as the lid switch
and not a keyboard button. With the lid switch properly identified, the
device triggers suspend correctly on lid close.
Signed-off-by: Jonathan Denose <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Introduce acpi_dev_uid_match() helper that matches the device with
supplied _UID string.
Signed-off-by: Raag Jadav <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
'modalias' is only written with snprintf() and it is already guaranteed
to be nul-terminated, so remove the unneeded (but harmless) writes of a
trailing '\0' to it.
Also snprintf() never returns negative values, so remove redundant (but
harmless) checks for it.
Signed-off-by: Christophe JAILLET <[email protected]>
[ rjw: Merge two patches into one, combine changelogs, add subject ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|