| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge x86-specific ACPI updates, PMIC driver ACPI updates and a DPTF
driver update for 5.17-rc1:
- Rework the handling of device enumeration quirks in the x86-specific
code and add new quirks for known-broken platforms (Hans de Goede).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
* acpi-x86:
ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
mmc: sdhci-acpi: Use the new soc_intel_is_byt() helper
mmc: sdhci-acpi: Remove special handling for GPD win/pocket devices
ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list
ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win
ACPI / x86: Allow specifying acpi_device_override_status() quirks by path
ACPI: Change acpi_device_always_present() into acpi_device_override_status()
ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table
* acpi-pmic:
ACPI: PMIC: xpower: Fix _TMP ACPI errors
ACPI: PMIC: allow drivers to provide a custom lpat_raw_to_temp() function
ACPI: PMIC: constify all struct intel_pmic_opregion_data declarations
* acpi-dptf:
ACPI: DPTF: Update device ID in a comment
|
|
Merge ACPI EC driver updates and ACPI processor driver updates for
5.17-rc1:
- Rework flushing of EC work while suspended to idle and clean up
the handling of events in the ACPI EC driver (Rafael Wysocki).
- Prohibit ec_sys module parameter write_support from being used
when the system is locked down (Hans de Goede).
- Make the ACPI processor thermal driver use cpufreq_cpu_get() to
check for presence of cpufreq policy (Manfred Spraul).
- Avoid unnecessary CPU cache flushing in the ACPI processor idle
driver (Kirill A. Shutemov).
- Replace kernel.h with the necessary inclusions in the ACPI
processor driver (Andy Shevchenko).
- Use swap() instead of open coding it in the ACPI processor idle
driver (Guo Zhengkui).
* acpi-ec:
ACPI: EC: Mark the ec_sys write_support param as module_param_hw()
ACPI: EC: Relocate acpi_ec_create_query() and drop acpi_ec_delete_query()
ACPI: EC: Make the event work state machine visible
ACPI: EC: Avoid queuing unnecessary work in acpi_ec_submit_event()
ACPI: EC: Rename three functions
ACPI: EC: Simplify locking in acpi_ec_event_handler()
ACPI: EC: Rearrange the loop in acpi_ec_event_handler()
ACPI: EC: Fold acpi_ec_check_event() into acpi_ec_event_handler()
ACPI: EC: Pass one argument to acpi_ec_query()
ACPI: EC: Call advance_transaction() from acpi_ec_dispatch_gpe()
ACPI: EC: Rework flushing of EC work while suspended to idle
* acpi-processor:
ACPI: processor: thermal: avoid cpufreq_get_policy()
ACPI: processor: idle: Only flush cache on entering C3
ACPI: processor idle: Use swap() instead of open coding it
ACPI: processor: Replace kernel.h with the necessary inclusions
|
|
Merge ACPI device enumeration updates, ACPI power management updates
and PCI host bridge ACPI driver updates for 5.17-rc1:
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system
PM transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li).
* acpi-scan:
serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
ACPI: Use acpi_fetch_acpi_dev() instead of acpi_bus_get_device()
ACPI: scan: Introduce acpi_fetch_acpi_dev()
ACPI: scan: Do not add device IDs from _CID if _HID is not valid
* acpi-pm:
ACPI: PM: Remove redundant cache flushing
ACPI: PM: Avoid CPU cache flush when entering S4
* acpi-power:
ACPI: PM: Emit debug messages when enabling/disabling wakeup power
* acpi-pci:
PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
|
|
The "data_info" struct is copied to the user. It has a 4 byte struct
hole after the last struct member so we need to memset that to avoid
copying uninitialized stack data to the user.
Fixes: b0013e037a8b ("ACPI: Introduce Platform Firmware Runtime Telemetry driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The previous commit fixed up all shell scripts to not include
include/config/auto.conf.
Now that include/config/auto.conf is only included by Makefiles,
we can change it into a more Make-friendly form.
Previously, Kconfig output string values enclosed with double-quotes
(both in the .config and include/config/auto.conf):
CONFIG_X="foo bar"
Unlike shell, Make handles double-quotes (and single-quotes as well)
verbatim. We must rip them off when used.
There are some patterns:
[1] $(patsubst "%",%,$(CONFIG_X))
[2] $(CONFIG_X:"%"=%)
[3] $(subst ",,$(CONFIG_X))
[4] $(shell echo $(CONFIG_X))
These are not only ugly, but also fragile.
[1] and [2] do not work if the value contains spaces, like
CONFIG_X=" foo bar "
[3] does not work correctly if the value contains double-quotes like
CONFIG_X="foo\"bar"
[4] seems to work better, but has a cost of forking a process.
Anyway, quoted strings were always PITA for our Makefiles.
This commit changes Kconfig to stop quoting in include/config/auto.conf.
These are the string type symbols referenced in Makefiles or scripts:
ACPI_CUSTOM_DSDT_FILE
ARC_BUILTIN_DTB_NAME
ARC_TUNE_MCPU
BUILTIN_DTB_SOURCE
CC_IMPLICIT_FALLTHROUGH
CC_VERSION_TEXT
CFG80211_EXTRA_REGDB_KEYDIR
EXTRA_FIRMWARE
EXTRA_FIRMWARE_DIR
EXTRA_TARGETS
H8300_BUILTIN_DTB
INITRAMFS_SOURCE
LOCALVERSION
MODULE_SIG_HASH
MODULE_SIG_KEY
NDS32_BUILTIN_DTB
NIOS2_DTB_SOURCE
OPENRISC_BUILTIN_DTB
SOC_CANAAN_K210_DTB_SOURCE
SYSTEM_BLACKLIST_HASH_LIST
SYSTEM_REVOCATION_KEYS
SYSTEM_TRUSTED_KEYS
TARGET_CPU
UNUSED_KSYMS_WHITELIST
XILINX_MICROBLAZE0_FAMILY
XILINX_MICROBLAZE0_HW_VER
XTENSA_VARIANT_NAME
I checked them one by one, and fixed up the code where necessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add a new device property to fetch clk-name from firmware.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-4-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Initially "is-rv" device property is added for 48MHz fixed clock
support on Raven or RV architecture. It's unused now as we moved
to pci device_id based selection to extend such support on other
architectures. This change removed unused code from acpi driver.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-3-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In case of error, memremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 0db89fa243e5 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PCC OpRegion provides a mechanism to communicate with the platform
directly from the AML. PCCT provides the list of PCC channel available
in the platform, a subset or all of them can be used in PCC Opregion.
This patch registers the PCC OpRegion handler before ACPI tables are
loaded. This relies on the special context data passed to identify and
set up the PCC channel before the OpRegion handler is executed for the
first time.
Typical PCC Opregion declaration looks like this:
OperationRegion (PFRM, PCC, 2, 0x74)
Field (PFRM, ByteAcc, NoLock, Preserve)
{
SIGN, 32,
FLGS, 32,
LEN, 32,
CMD, 32,
DATA, 800
}
It contains four named double words followed by 100 bytes of buffer
names DATA.
ASL can fill out the buffer something like:
/* Create global or local buffer */
Name (BUFF, Buffer (0x0C){})
/* Create double word fields over the buffer */
CreateDWordField (BUFF, 0x0, WD0)
CreateDWordField (BUFF, 0x04, WD1)
CreateDWordField (BUFF, 0x08, WD2)
/* Fill the named fields */
WD0 = 0x50434300
SIGN = BUFF
WD0 = 1
FLGS = BUFF
WD0 = 0x10
LEN = BUFF
/* Fill the payload in the DATA buffer */
WD0 = 0
WD1 = 0x08
WD2 = 0
DATA = BUFF
/* Write to CMD field to trigger handler */
WD0 = 0x4404
CMD = BUFF
This buffer is received by acpi_pcc_opregion_space_handler. This
handler will fetch the complete buffer via internal_pcc_buffer.
The setup handler will receive the special PCC context data which will
contain the PCC channel index which used to set up the channel. The
buffer pointer and length is saved in region context which is then used
in the handler.
(kernel test robot: Build failure with CONFIG_ACPI_DEBUGGER)
Link: https://lore.kernel.org/r/202201041539.feAV0l27-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
So far all of the tablets for which the skip i2c-client/serdev enumeration
quirks have been added also all have broken ACPI AC / battery devices
extend the existing quirks for these tablets to also skip the broken
AC / battery devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some x86 ACPI boards have broken AC and battery ACPI devices in their ACPI
tables. This is often tied to these devices using certain PMICs where the
factory OS image seems to be using native charger and fuel-gauge drivers
instead.
So far both the AC and battery drivers have almost identical checks for
these PMICs including both of them having a DMI based mechanism to force
usage of the ACPI AC and battery drivers on some boards even though one
of these PMICs is present, with the same 2 boards listed in both driver's
DMI tables for this.
The only difference is that the AC driver checks for 2 PMICs and the
battery driver only for one. This has grown this way because the other
(Whiskey Cove) PMIC is only used on a few boards (3 known boards) and
although some of these do have non working ACPI battery devices, their
_STA method always returns 0, but that really should not be relied on.
This patch factors out the shared checks into a new
acpi_quirk_skip_acpi_ac_and_battery() helper and moves the AC and
battery drivers over to this new helper.
Note the DMI table is shared with acpi_quirk_skip_i2c_client_enumeration()
and acpi_quirk_skip_serdev_enumeration(), because boards needing DMI quirks
for either of these typically also have broken AC and battery ACPI devices.
The ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY quirk is not set yet on boards
already in this DMI table, to avoid introducing any functional changes
in this refactoring patch.
Besided sharing the code between the AC and battery drivers this
refactoring also moves this quirk handling to under #ifdef CONFIG_X86,
removing this x86 specific code from non x86 ACPI builds.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge recent device enumeration changes to satisfy dependencies.
|
|
cpu_has_cpufreq() stores a 'struct cpufreq_policy' on the stack.
Unfortunately, with debugging options enabled, the structure can be
larger than 1024 bytes, which causes a compiler warning/error.
(actually observed: 1184 bytes).
Therefore: Switch to cpufreq_cpu_get().
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
x86 ACPI boards which ship with only Android as their factory image usually
declare a whole bunch of bogus I2C devs in their ACPI tables and sometimes
there are issues with serdev devices on these boards too, e.g. the resource
points to the wrong serdev_controller.
Instantiating I2C / serdev devs for these bogus devs causes various issues,
e.g. GPIO/IRQ resource conflicts because sometimes drivers do bind to them.
The Android x86 kernel fork shipped on these devices has some special code
to remove the bogus I2C clients (and serdevs are ignored completely).
Introduce acpi_quirk_skip_i2c_client_enumeration() and
acpi_quirk_skip_serdev_enumeration() helpers. Which can be used by the I2C/
serdev code to skip instantiating any I2C or serdev devs on broken boards.
These 2 helpers are added to drivers/acpi/x86/utils.c so that the DMI table
can be shared between the I2C and serdev code.
Note these boards typically do actually have I2C and serdev devices, just
different ones then the ones described in their DSDT. The devices which
are actually present are manually instantiated by the
drivers/platform/x86/x86-android-tablets.c kernel module.
The new helpers are only build if CONFIG_X86_ANDROID_TABLETS is enabled,
otherwise they are empty stubs to not unnecessarily grow the kernel size.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new function to enable CPPC feature. This function
will write Continuous Performance Control package
EnableRegister field on the processor.
CPPC EnableRegister register described in section 8.4.7.1 of ACPI 6.4:
This element is optional. If supported, contains a resource descriptor
with a single Register() descriptor that describes a register to which
OSPM writes a One to enable CPPC on this processor. Before this register
is set, the processor will be controlled by legacy mechanisms (ACPI
Pstates, firmware, etc.).
This register will be used for AMD processors to enable AMD P-State
function instead of legacy ACPI P-States.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As this is a static check, it should be based upon what is currently
present on the system. This makes probeing more deterministic.
While local APIC flags field (lapic_flags) of cpu core in MADT table is
0, then the cpu core won't be enabled. In this case, _CPC won't be found
in this core, and return back to _CPC invalid with walking through
possible cpus (include disable cpus). This is not expected, so switch to
check present CPUs instead.
Reported-by: Jinzhou Su <Jinzhou.Su@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
According to the ACPI v6.2 (and later) specification, SystemIO can be
used for _CPC registers. This teaches cppc_acpi how to handle such
registers.
This patch was tested using the amd_pstate driver on my Zephyrus G15
(model GA503QS) using the current version 410 BIOS, which uses
a SystemIO register for the HighestPerformance element in _CPC.
Signed-off-by: Steven Noonan <steven@valvesoftware.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
BCM4752 and LNV4752 ACPI nodes describe a Broadcom 4752 GPS module
attached to an UART of the system.
The GPS modules talk a custom protocol which only works with a closed-
source Android gpsd daemon which knows this protocol.
The ACPI nodes also describe GPIOs to turn the GPS on/off these are
handled by the net/rfkill/rfkill-gpio.c code. This handling predates the
addition of enumeration of ACPI instantiated serdevs to the kernel and
was broken by that addition, because the ACPI scan code now no longer
instantiates platform_device-s for these nodes.
Rename the i2c_multi_instantiate_ids HID list to ignore_serial_bus_ids
and add the BCM4752 and LNV4752 HIDs, so that rfkill-gpio gets
a platform_device to bind to again; and so that a tty cdev for gpsd
gets created for these.
Fixes: e361d1f85855 ("ACPI / scan: Fix enumeration for special UART devices")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add the description of @support and remove @req in
acpi_pci_osc_control_set() kernel-doc comment to remove warnings found
by running scripts/kernel-doc, which is caused by using 'make W=1'.
drivers/acpi/pci_root.c:337: warning: Excess function parameter 'req'
description in 'acpi_pci_osc_control_set'
drivers/acpi/pci_root.c:337: warning: Function parameter or member
'support' not described in 'acpi_pci_osc_control_set'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 6bc779ee05d4 ("PCI/ACPI: Check for _OSC support in acpi_pci_osc_control_set()")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EC/ACPI firmware on Lenovo ThinkPads used to report a status
of "Unknown" when the battery is between the charge start and
charge stop thresholds. On Windows, it reports "Not Charging"
so the quirk has been added to also report correctly.
Now the "status" attribute returns "Not Charging" when the
battery on ThinkPads is not physicaly charging.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Storing CRC-32 hash of the Physical Location of Device
object (_PLD) with devices that have it. The hash is stored
to a new struct acpi_device member "pld_crc".
The hash makes it easier to find devices that share a
location, as there is no need to evaluate the entire object
every time. Knowledge about devices that share a location
can be used in device drivers that need to know the
connections to other components inside a system. USB3 ports
will for example always share their location with a USB2
port.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223081620.45479-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
So we can use bus_for_each_dev() and others from modules.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223081620.45479-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the ACPI sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This driver allows user space to fetch telemetry data from the
firmware with the help of the Platform Firmware Runtime Telemetry
interface.
Both PFRU and PFRT are based on ACPI _DSM interfaces located under
special device objects in the ACPI Namespace, but these interfaces
are different from each other, so it is better to provide a separate
driver from each of them, even though they share some common
definitions and naming conventions.
Tested-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce the pfr_update driver which can be used for Platform Firmware
Runtime code injection and driver update [1].
The user is expected to provide the EFI capsule, and pass it to the
driver by writing the capsule to a device special file. The capsule
is transferred by the driver to the platform firmware with the help
of an ACPI _DSM method under the special ACPI Platform Firmware
Runtime Update device (INTC1080), and the actual firmware update is
carried out by the low-level Management Mode code in the platform
firmware.
This change allows certain pieces of the platform firmware to be
updated on the fly while the system is running (runtime) without the
need to restart it, which is key in the cases when the system needs to
be available 100% of the time and it cannot afford the downtime related
to restarting it, or when the work carried out by the system is
particularly important, so it cannot be interrupted, and it is not
practical to wait until it is complete.
Link: https://uefi.org/sites/default/files/resources/Intel_MM_OS_Interface_Spec_Rev100.pdf # [1]
Tested-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 86c919d2bad08491fc91ffa53e9b169092de8622
Repaired with casts.
Link: https://github.com/acpica/acpica/commit/86c919d2
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit ff803279dde7a3e068a6a698d8c69503cd159ad7
To simply return (AE_BAD_PARAMETER); to fix compilation on MSVC.
Link: https://github.com/acpica/acpica/commit/ff803279
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e
According to ACPI 6.4, Section 16.2, the CPU cache flushing is
required on entering to S1, S2, and S3, but the ACPICA code
flushes the CPU cache regardless of the sleep state.
Blind cache flush on entering S5 causes problems for TDX.
Flushing happens with WBINVD that is not supported in the TDX
environment.
TDX only supports S5 and adjusting ACPICA code to conform to the
spec more strictly fixes the issue.
Link: https://github.com/acpica/acpica/commit/3dd7e1f3
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 55526e8a6133cbf5a9cc0fb75a95dbbac6eb98e6
PCC Opregion added in ACPIC 6.3 requires special context data similar
to GPIO and Generic Serial Bus as it needs to know the internal PCC
buffer and its length as well as the PCC channel index when the opregion
handler is being executed by the OSPM.
Lets add support for the special context data needed by PCC Opregion.
Link: https://github.com/acpica/acpica/commit/55526e8a
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 41be6afacfdaec2dba3a5ed368736babc2a7aa5c
With the PCC Opregion in the firmware and we are hitting below kernel crash:
-->8
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
Workqueue: pm pm_runtime_work
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __memcpy+0x54/0x260
lr : acpi_ex_write_data_to_field+0xb8/0x194
Call trace:
__memcpy+0x54/0x260
acpi_ex_store_object_to_node+0xa4/0x1d4
acpi_ex_store+0x44/0x164
acpi_ex_opcode_1A_1T_1R+0x25c/0x508
acpi_ds_exec_end_op+0x1b4/0x44c
acpi_ps_parse_loop+0x3a8/0x614
acpi_ps_parse_aml+0x90/0x2f4
acpi_ps_execute_method+0x11c/0x19c
acpi_ns_evaluate+0x1ec/0x2b0
acpi_evaluate_object+0x170/0x2b0
acpi_device_set_power+0x118/0x310
acpi_dev_suspend+0xd4/0x180
acpi_subsys_runtime_suspend+0x28/0x38
__rpm_callback+0x74/0x328
rpm_suspend+0x2d8/0x624
pm_runtime_work+0xa4/0xb8
process_one_work+0x194/0x25c
worker_thread+0x260/0x49c
kthread+0x14c/0x30c
ret_from_fork+0x10/0x20
Code: f9000006 f81f80a7 d65f03c0 361000c2 (b9400026)
---[ end trace 24d8a032fa77b68a ]---
The reason for the crash is that the PCC channel index passed via region.address
in acpi_ex_store_object_to_node is interpreted as the channel subtype
incorrectly.
Assuming the PCC op_region support is not used by any other type, let us
remove the subtype check as the AML has no access to the subtype information.
Once we remove it, the kernel crash disappears and correctly complains about
missing PCC Opregion handler.
ACPI Error: No handler for Region [PFRM] ((____ptrval____)) [PCC] (20210730/evregion-130)
ACPI Error: Region PCC (ID=10) has no handler (20210730/exfldio-261)
ACPI Error: Aborting method \_SB.ETH0._PS3 due to previous error (AE_NOT_EXIST) (20210730/psparse-531)
Link: https://github.com/acpica/acpica/commit/41be6afa
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e
If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class,
acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to
obtain return_desc which may require additional resolution with
the help of acpi_ex_read_data_from_field (). If the latter fails,
the reference counter of the original return_desc is decremented
which is incorrect, because acpi_ns_get_attached_object () does not
increment the reference counter of the object returned by it.
This issue may lead to premature deletion of the attached object
while it is still attached and a use-after-free and crash in the
host OS. For example, this may happen when on evaluation of ref_of()
a local region field where there is no registered handler for the
given Operation Region.
Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away
after a acpi_ex_read_data_from_field () failure.
Link: https://github.com/acpica/acpica/commit/d984f120
Link: https://github.com/acpica/acpica/pull/685
Reported-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit c11af67d8f7e3d381068ce7771322f2b5324d687
If original_count is 0 in acpi_ut_update_ref_count (),
acpi_ut_delete_internal_obj () is invoked for the target object, which is
incorrect, because that object has been deleted once already and the
memory allocated to store it may have been reclaimed and allocated
for a different purpose by the host OS. Moreover, a confusing debug
message following the "Reference Count is already zero, cannot
decrement" warning is printed in that case.
To fix this issue, make acpi_ut_update_ref_count () return after finding
that original_count is 0 and printing the above warning.
Link: https://github.com/acpica/acpica/commit/c11af67d
Link: https://github.com/acpica/acpica/pull/652
Reported-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 6bb72909c1e3d415aee214104a01bc9834b2d4ce
Since the Signature member is accessed through an struct acpi_table_header, the
pointer to it is only to a 4-char array, and so trying to read past the
4th character, as will be done when it is an RSDP, reads beyond the
bounds of the accessed member. On CHERI, and thus Arm's experimental
Morello prototype architecture, pointers are represented as
capabilities, which are unforgeable bounded pointers, providing
always-on fine-grained spatial memory safety. By default, subobject
bounds enforcement is not enabled, only bounds on allocations, but it is
enabled in the cheri_BSD (a port of free_BSD) kernel as intra-object
overflow attacks are common on operating system kernels, and so this
overflow is detected there and traps.
Link: https://github.com/acpica/acpica/commit/6bb72909
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit dfa3feffa8f760b686207d09dc880cd2f26c72af
Currently the pointer to the table is cast to acpi_physical_address and
later cast back to a pointer to be dereferenced. Whether or not this is
supported is implementation-defined.
On CHERI, and thus Arm's experimental Morello prototype architecture,
pointers are represented as capabilities, which are unforgeable bounded
pointers, providing always-on fine-grained spatial memory safety. This
means that any pointer cast to a plain integer will lose all its
associated metadata, and when cast back to a pointer it will give a
null-derived pointer (one that has the same metadata as null but an
address equal to the integer) that will trap on any dereference. As a
result, this is an implementation where acpi_physical_address cannot be
used as a hack to store real pointers.
Thus, alter the lifecycle of table descriptors. Internal physical tables
keep the current behaviour where only the address is set on install, and
the pointer is set on acquire. Virtual tables (internal and external)
now store the pointer on initialisation and use that on acquire (which
will redundantly set *table_ptr to itself, but changing that is both
unnecessary and overly complicated as acpi_tb_acquire_table is called with
both a pointer to a variable and a pointer to Table->Pointer itself).
This requires propagating the (possible) table pointer everywhere in
order to make sure pointers make it through to acpi_tb_acquire_temp_table,
which requires a change to the acpi_install_table interface. Instead of
taking an ACPI_PHYSADDR_TYPE and a boolean indicating whether it's
physical or virtual, it is now split into acpi_install_table (that takes
an external virtual table pointer) and acpi_install_physical_table (that
takes an ACPI_PHYSADDR_TYPE for an internal physical table address).
This also has the benefit of providing a cleaner API.
Link: https://github.com/acpica/acpica/commit/dfa3feff
Signed-off-by: Bob Moore <robert.moore@intel.com>
[ rjw: Adjust the code in tables.c to match interface changes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit d9eb82bd7515989f0b29d79deeeb758db4d6529c
Currently the pointer to the table is cast to acpi_physical_address and
later cast back to a pointer to be dereferenced. Whether or not this is
supported is implementation-defined.
On CHERI, and thus Arm's experimental Morello prototype architecture,
pointers are represented as capabilities, which are unforgeable bounded
pointers, providing always-on fine-grained spatial memory safety. This
means that any pointer cast to a plain integer will lose all its
associated metadata, and when cast back to a pointer it will give a
null-derived pointer (one that has the same metadata as null but an
address equal to the integer) that will trap on any dereference. As a
result, this is an implementation where acpi_physical_address cannot be
used as a hack to store real pointers.
Thus, add a new field to struct acpi_object_region to store the pointer for
table regions, and propagate it to acpi_ex_data_table_space_handler via the
region context, to use a more portable implementation that supports
CHERI.
Link: https://github.com/acpica/acpica/commit/d9eb82bd
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently it's too hard to read the _CPC structure as it's commented.
Reshuffle indentation and style to make it readable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Strictly speaking the comparison between guid_t and raw buffer
is not correct. Import GUID to variable of guid_t type and then
compare.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211213204632.56735-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Some systems (e.g. Hyper-V guests) have all their memory marked as
hotpluggable in SRAT. acpi_numa_memory_affinity_init(), however,
ignores all such regions when !CONFIG_MEMORY_HOTPLUG and this is
unfortunate as memory affinity (NUMA) information gets lost.
'Hot Pluggable' flag in SRAT only means that "system hardware supports
hot-add and hot-remove of this memory region", it doesn't prevent
memory from being cold-plugged there.
Ignore 'Hot Pluggable' bit instead of skipping the whole memory
affinity information when !CONFIG_MEMORY_HOTPLUG.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA code takes care about cache flushing on S1/S2/S3 in
acpi_hw_extended_sleep() and acpi_hw_legacy_sleep().
acpi_suspend_enter() calls into ACPICA code via acpi_enter_sleep_state()
for S1 or x86_acpi_suspend_lowlevel() for S3.
acpi_sleep_prepare() call tree:
__acpi_pm_prepare()
acpi_pm_prepare()
acpi_suspend_ops::prepare_late()
acpi_hibernation_ops::pre_snapshot()
acpi_hibernation_ops::prepare()
acpi_suspend_begin_old()
acpi_suspend_begin_old::begin()
acpi_hibernation_begin_old()
acpi_hibernation_ops_old::acpi_hibernation_begin_old()
acpi_power_off_prepare()
pm_power_off_prepare()
Hibernation (S4) and Power Off (S5) don't require cache flushing, so
the only interesting callsites are acpi_suspend_ops::prepare_late()
and acpi_suspend_begin_old::begin(). Both of them have cache flush
on ->enter() operation in acpi_suspend_enter().
Remove redundant ACPI_FLUSH_CPU_CACHE() in acpi_sleep_prepare() and
acpi_suspend_enter().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
According to ACPI 6.4, Section 8.2, CPU cache flushing required on
entering the C3 power state.
Avoid flushing the cache on entering other C-states.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Modify the ACPI code to use acpi_fetch_acpi_dev() instead of
acpi_bus_get_device() where applicable.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Introduce acpi_fetch_acpi_dev() as a more reasonable replacement for
acpi_bus_get_device() and modify the code in scan.c to use it instead
of the latter.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into media_tree
Signed tag for the immutable platform-drivers-x86-int3472 branch
This branch contains 5.16-rc1 + the pending ACPI/i2c, tps68570 platform_data
and INT3472 driver patches.
* tag 'platform-drivers-x86-int3472-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: int3472: Deal with probe ordering issues
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Split into 2 drivers
platform_data: Add linux/platform_data/tps68470.h file
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
|
|
Add AEST to the list of known ACPI table signatures to allow the
kernel to recognize it when upgrading tables via initrd.
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: New subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the clks/regulators
when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
One case where we hit this issue is camera sensors such as e.g. the OV8865
sensor found on the Microsoft Surface Go. The sensor uses clks, regulators
and GPIOs provided by a TPS68470 PMIC which is described in an INT3472
ACPI device. There is special platform code handling this and setting
platform_data with the necessary consumer info on the MFD cells
instantiated for the PMIC under: drivers/platform/x86/intel/int3472.
For this to work properly the ov8865 driver must not bind to the I2C-client
for the OV8865 sensor until after the TPS68470 PMIC gpio, regulator and
clk MFD cells have all been fully setup.
The OV8865 on the Microsoft Surface Go is just one example, all X86
devices using the Intel IPU3 camera block found on recent Intel SoCs
have similar issues where there is an INT3472 HID ACPI-device, which
describes the clks and regulators, and the driver for this INT3472 device
must be fully initialized before the sensor driver (any sensor driver)
binds for things to work properly.
On these devices the ACPI nodes describing the sensors all have a _DEP
dependency on the matching INT3472 ACPI device (there is one per sensor).
This allows solving the probe-ordering problem by delaying the enumeration
(instantiation of the I2C-client in the ov8865 example) of ACPI-devices
which have a _DEP dependency on an INT3472 device.
The new acpi_dev_ready_for_enumeration() helper used for this is also
exported because for devices, which have the enumeration_by_parent flag
set, the parent-driver will do its own scan of child ACPI devices and
it will try to enumerate those during its probe(). Code doing this such
as e.g. the i2c-core-acpi.c code must call this new helper to ensure
that it too delays the enumeration until all the _DEP dependencies are
met on devices which have the new honor_deps flag set.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-2-hdegoede@redhat.com
|
|
According to ACPI 6.4, Section 16.2, the CPU cache flushing is
required on entering to S1, S2, and S3.
No need to flush the caches during hibernation (S4).
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Theoretically, when the hardware signature in FACS changes, the OS
is supposed to gracefully decline to attempt to resume from S4:
"If the signature has changed, OSPM will not restore the system
context and can boot from scratch"
In practice, Windows doesn't do this and many laptop vendors do allow
the signature to change especially when docking/undocking, so it would
be a bad idea to simply comply with the specification by default in the
general case.
However, there are use cases where we do want the compliant behaviour
and we know it's safe. Specifically, when resuming virtual machines where
we know the hypervisor has changed sufficiently that resume will fail.
We really want to be able to *tell* the guest kernel not to try, so it
boots cleanly and doesn't just crash. This patch provides a way to opt
in to the spec-compliant behaviour on the command line.
A follow-up patch may do this automatically for certain "known good"
machines based on a DMI match, or perhaps just for all hypervisor
guests since there's no good reason a hypervisor would change the
hardware_signature that it exposes to guests *unless* it wants them
to obey the ACPI specification.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some devices with a X-Powers AXP288 PMIC the LPAT tables in the ACPI
node for the AXP288 PMIC for some reason only describe a small temperature
range, e.g. 27° - 37° Celcius (assuming the entries are in millidegrees).
When the tablet is idle in a room at 21° degrees this is causing values
outside the LPAT table to be read, causing e.g. the following 2 errors
to get spammed to the logs every 4 seconds! :
[ 7512.791316] ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20210930/evregion-281)
[ 7512.791611] ACPI Error: Aborting method \_SB.SXP1._TMP due to previous error (AE_ERROR) (20210930/psparse-529)
Fix this by clamping the raw value to the LPAT table range before
passing it to acpi_lpat_raw_to_temp().
Note clamping has been chosen rather then extrapolating because it is
unknown how other parts of the ACPI tables will respond to temperature
values outside of the LPAT range.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The LPAT tables used in the DSDT for some PMICs require special handling,
allow the PMIC OpRegion drivers to provide an alternative implementation
by adding a lpat_raw_to_temp function pointer to struct pmic_table;
and initialize this to the default acpi_lpat_raw_to_temp function
for all PMICs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The struct intel_pmic_opregion_data declarations never change,
constify them all.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|