aboutsummaryrefslogtreecommitdiff
path: root/crypto
AgeCommit message (Collapse)AuthorFilesLines
2016-11-13crypto: poly1305 - Use unaligned access where requiredJason A. Donenfeld1-19/+15
By using the unaligned access helpers, we drastically improve performance on small MIPS routers that have to go through the exception fix-up handler for these unaligned accesses. Signed-off-by: Jason A. Donenfeld <[email protected]> Reviewed-by: Eric Biggers <[email protected]> Acked-by: Martin Willi <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-11-01crypto: cryptd - Remove unused but set variable 'tfm'Tobias Klauser1-2/+0
Remove the unused but set variable tfm in cryptd_enqueue_request to fix the following warning when building with 'W=1': crypto/cryptd.c:125:21: warning: variable 'tfm' set but not used [-Wunused-but-set-variable] Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-11-01crypto: skcipher - Get rid of crypto_spawn_skcipher2()Eric Biggers7-7/+7
Since commit 3a01d0ee2b99 ("crypto: skcipher - Remove top-level givcipher interface"), crypto_spawn_skcipher2() and crypto_spawn_skcipher() are equivalent. So switch callers of crypto_spawn_skcipher2() to crypto_spawn_skcipher() and remove it. Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-11-01crypto: skcipher - Get rid of crypto_grab_skcipher2()Eric Biggers7-21/+21
Since commit 3a01d0ee2b99 ("crypto: skcipher - Remove top-level givcipher interface"), crypto_grab_skcipher2() and crypto_grab_skcipher() are equivalent. So switch callers of crypto_grab_skcipher2() to crypto_grab_skcipher() and remove it. Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-11-01crypto: acomp - fix dependency in MakefileGiovanni Cabiddu1-2/+3
Fix dependency between acomp and scomp that appears when acomp is built as module Signed-off-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: acomp - update testmgr with support for acompGiovanni Cabiddu1-13/+145
Add tests to the test manager for algorithms exposed through acomp. Signed-off-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: acomp - add support for deflate via scompGiovanni Cabiddu2-10/+102
Add scomp backend for deflate compression algorithm. Signed-off-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: acomp - add support for 842 via scompGiovanni Cabiddu2-2/+80
Add scomp backend for 842 compression algorithm. Signed-off-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: acomp - add support for lz4hc via scompGiovanni Cabiddu2-10/+83
Add scomp backend for lz4hc compression algorithm. Signed-off-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: acomp - add support for lz4 via scompGiovanni Cabiddu2-10/+82
Add scomp backend for lz4 compression algorithm. Signed-off-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: acomp - add support for lzo via scompGiovanni Cabiddu2-15/+83
Add scomp backend for lzo compression algorithm. Signed-off-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: acomp - add driver-side scomp interfaceGiovanni Cabiddu3-2/+410
Add a synchronous back-end (scomp) to acomp. This allows to easily expose the already present compression algorithms in LKCF via acomp. Signed-off-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: acomp - add asynchronous compression apiGiovanni Cabiddu4-0/+149
Add acomp, an asynchronous compression api that uses scatterlist buffers. Signed-off-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: engine - Handle the kthread worker using the new APIPetr Mladek1-15/+11
Use the new API to create and destroy the crypto engine kthread worker. The API hides some implementation details. In particular, kthread_create_worker() allocates and initializes struct kthread_worker. It runs the kthread the right way and stores task_struct into the worker structure. kthread_destroy_worker() flushes all pending works, stops the kthread and frees the structure. This patch does not change the existing behavior except for dynamically allocating struct kthread_worker and storing only the pointer of this structure. It is compile tested only because I did not find an easy way how to run the code. Well, it should be pretty safe given the nature of the change. Signed-off-by: Petr Mladek <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-25crypto: gcm - Fix error return code in crypto_gcm_create_common()Wei Yongjun1-1/+1
Fix to return error code -EINVAL from the invalid alg ivsize error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-21crypto: cmac - fix alignment of 'consts'Eric Biggers1-4/+9
The per-transform 'consts' array is accessed as __be64 in crypto_cmac_digest_setkey() but was only guaranteed to be aligned to __alignof__(long). Fix this by aligning it to __alignof__(__be64). Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-21crypto: cmac - return -EINVAL if block size is unsupportedEric Biggers1-0/+1
cmac_create() previously returned 0 if a cipher with a block size other than 8 or 16 bytes was specified. It should return -EINVAL instead. Granted, this doesn't actually change any behavior because cryptomgr currently ignores any return value other than -EAGAIN from template ->create() functions. Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-21crypto: api - Remove no-op exit_ops codeEric Biggers4-29/+2
crypto_exit_cipher_ops() and crypto_exit_compress_ops() are no-ops and have been for a long time, so remove them. Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-21crypto: api - Fix Kconfig dependencies for FIPSAlec Ari1-1/+1
Currently FIPS depends on MODULE_SIG, even if MODULES is disabled. This change allows the enabling of FIPS without support for modules. If module loading support is enabled, only then does FIPS require MODULE_SIG. Signed-off-by: Alec Ari <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-11kthread: kthread worker API cleanupPetr Mladek1-10/+10
A good practice is to prefix the names of functions by the name of the subsystem. The kthread worker API is a mix of classic kthreads and workqueues. Each worker has a dedicated kthread. It runs a generic function that process queued works. It is implemented as part of the kthread subsystem. This patch renames the existing kthread worker API to use the corresponding name from the workqueues API prefixed by kthread_: __init_kthread_worker() -> __kthread_init_worker() init_kthread_worker() -> kthread_init_worker() init_kthread_work() -> kthread_init_work() insert_kthread_work() -> kthread_insert_work() queue_kthread_work() -> kthread_queue_work() flush_kthread_work() -> kthread_flush_work() flush_kthread_worker() -> kthread_flush_worker() Note that the names of DEFINE_KTHREAD_WORK*() macros stay as they are. It is common that the "DEFINE_" prefix has precedence over the subsystem names. Note that INIT() macros and init() functions use different naming scheme. There is no good solution. There are several reasons for this solution: + "init" in the function names stands for the verb "initialize" aka "initialize worker". While "INIT" in the macro names stands for the noun "INITIALIZER" aka "worker initializer". + INIT() macros are used only in DEFINE() macros + init() functions are used close to the other kthread() functions. It looks much better if all the functions use the same scheme. + There will be also kthread_destroy_worker() that will be used close to kthread_cancel_work(). It is related to the init() function. Again it looks better if all functions use the same naming scheme. + there are several precedents for such init() function names, e.g. amd_iommu_init_device(), free_area_init_node(), jump_label_init_type(), regmap_init_mmio_clk(), + It is not an argument but it was inconsistent even before. [[email protected]: fix linux-next merge conflict] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Suggested-by: Andrew Morton <[email protected]> Signed-off-by: Petr Mladek <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: "Paul E. McKenney" <[email protected]> Cc: Josh Triplett <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Vlastimil Babka <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-10-10Merge branch 'linus' of ↵Linus Torvalds12-119/+274
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.9: API: - The crypto engine code now supports hashes. Algorithms: - Allow keys >= 2048 bits in FIPS mode for RSA. Drivers: - Memory overwrite fix for vmx ghash. - Add support for building ARM sha1-neon in Thumb2 mode. - Reenable ARM ghash-ce code by adding import/export. - Reenable img-hash by adding import/export. - Add support for multiple cores in omap-aes. - Add little-endian support for sha1-powerpc. - Add Cavium HWRNG driver for ThunderX SoC" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits) crypto: caam - treat SGT address pointer as u64 crypto: ccp - Make syslog errors human-readable crypto: ccp - clean up data structure crypto: vmx - Ensure ghash-generic is enabled crypto: testmgr - add guard to dst buffer for ahash_export crypto: caam - Unmap region obtained by of_iomap crypto: sha1-powerpc - little-endian support crypto: gcm - Fix IV buffer size in crypto_gcm_setkey crypto: vmx - Fix memory corruption caused by p8_ghash crypto: ghash-generic - move common definitions to a new header file crypto: caam - fix sg dump hwrng: omap - Only fail if pm_runtime_get_sync returns < 0 crypto: omap-sham - shrink the internal buffer size crypto: omap-sham - add support for export/import crypto: omap-sham - convert driver logic to use sgs for data xmit crypto: omap-sham - change the DMA threshold value to a define crypto: omap-sham - add support functions for sg based data handling crypto: omap-sham - rename sgl to sgl_tmp for deprecation crypto: omap-sham - align algorithms on word offset crypto: omap-sham - add context export/import stubs ...
2016-10-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu5-124/+60
Merge the crypto tree to pull in vmx ghash fix.
2016-10-06Merge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-4/+4
Pull dmaengine updates from Vinod Koul: "This is bit large pile of code which bring in some nice additions: - Error reporting: we have added a new mechanism for users of dmaenegine to register a callback_result which tells them the result of the dma transaction. Right now only one user (ntb) is using it. - As we discussed on KS mailing list and pointed out NO_IRQ has no place in kernel, this also remove NO_IRQ from dmaengine subsystem (both arm and ppc users) - Support for IOMMU slave transfers and its implementation for arm. - To get better build coverage, enable COMPILE_TEST for bunch of driver, and fix the warning and sparse complaints on these. - Apart from above, usual updates spread across drivers" * tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits) async_pq_val: fix DMA memory leak dmaengine: virt-dma: move function declarations dmaengine: omap-dma: Enable burst and data pack for SG DT: dmaengine: rcar-dmac: document R8A7743/5 support dmaengine: fsldma: Unmap region obtained by of_iomap dmaengine: jz4780: fix resource leaks on error exit return dma-debug: fix ia64 build, use PHYS_PFN dmaengine: coh901318: fix integer overflow when shifting more than 32 places dmaengine: edma: avoid uninitialized variable use dma-mapping: fix m32r build warning dma-mapping: fix ia64 build, use PHYS_PFN dmaengine: ti-dma-crossbar: enable COMPILE_TEST dmaengine: omap-dma: enable COMPILE_TEST dmaengine: edma: enable COMPILE_TEST dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs dmaengine: edma: Rename set_bits and remove unused clear_bits helper dmaengine: edma: Use correct type for of_find_property() third parameter dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC) ...
2016-10-05async_pq_val: fix DMA memory leakJustin Maggard1-4/+4
Add missing dmaengine_unmap_put(), so we don't OOM during RAID6 sync. Fixes: 1786b943dad0 ("async_pq_val: convert to dmaengine_unmap_data") Signed-off-by: Justin Maggard <[email protected]> Reviewed-by: Dan Williams <[email protected]> Cc: <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2016-10-02crypto: testmgr - add guard to dst buffer for ahash_exportJan Stancek1-1/+4
Add a guard to 'state' buffer and warn if its consistency after call to crypto_ahash_export() changes, so that any write that goes beyond advertised statesize (and thus causing potential memory corruption [1]) is more visible. [1] https://marc.info/?l=linux-crypto-vger&m=147467656516085 Signed-off-by: Jan Stancek <[email protected]> Cc: Herbert Xu <[email protected]> Cc: Marcelo Cerri <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-02crypto: gcm - Fix IV buffer size in crypto_gcm_setkeyOndrej Mosnáček1-1/+1
The cipher block size for GCM is 16 bytes, and thus the CTR transform used in crypto_gcm_setkey() will also expect a 16-byte IV. However, the code currently reserves only 8 bytes for the IV, causing an out-of-bounds access in the CTR transform. This patch fixes the issue by setting the size of the IV buffer to 16 bytes. Fixes: 84c911523020 ("[CRYPTO] gcm: Add support for async ciphers") Signed-off-by: Ondrej Mosnacek <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-10-02crypto: ghash-generic - move common definitions to a new header fileMarcelo Cerri1-12/+1
Move common values and types used by ghash-generic to a new header file so drivers can directly use ghash-generic as a fallback implementation. Fixes: cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module") Cc: [email protected] Signed-off-by: Marcelo Cerri <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-09-22crypto: rsa-pkcs1pad - Handle leading zero for decryptionHerbert Xu1-17/+24
As the software RSA implementation now produces fixed-length output, we need to eliminate leading zeros in the calling code instead. This patch does just that for pkcs1pad decryption while signature verification was fixed in an earlier patch. Fixes: 9b45b7bba3d2 ("crypto: rsa - Generate fixed-length output") Reported-by: Mat Martineau <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-09-13crypto: squash lines for simple wrapper functionsMasahiro Yamada2-10/+2
Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-09-13crypto: skcipher - Fix blkcipher walk OOM crashHerbert Xu1-1/+2
When we need to allocate a temporary blkcipher_walk_next and it fails, the code is supposed to take the slow path of processing the data block by block. However, due to an unrelated change we instead end up dereferencing the NULL pointer. This patch fixes it by moving the unrelated bsize setting out of the way so that we enter the slow path as inteded. Fixes: 7607bd8ff03b ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block") Cc: [email protected] Reported-by: xiakaixu <[email protected]> Reported-by: Ard Biesheuvel <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Tested-by: Ard Biesheuvel <[email protected]>
2016-09-13crypto: echainiv - Replace chaining with multiplicationHerbert Xu1-91/+24
The current implementation uses a global per-cpu array to store data which are used to derive the next IV. This is insecure as the attacker may change the stored data. This patch removes all traces of chaining and replaces it with multiplication of the salt and the sequence number. Fixes: a10f554fa7e0 ("crypto: echainiv - Add encrypted chain IV...") Cc: [email protected] Reported-by: Mathias Krause <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-09-07crypto: algif_hash - Handle NULL hashes correctlyHerbert Xu1-12/+61
Right now attempting to read an empty hash simply returns zeroed bytes, this patch corrects this by calling the digest function using an empty input. Reported-by: Russell King - ARM Linux <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-09-07crypto: engine - permit to enqueue ashash_requestCorentin LABBE1-38/+148
The current crypto engine allow only ablkcipher_request to be enqueued. Thus denying any use of it for hardware that also handle hash algo. This patch modify the API for allowing to enqueue ciphers and hash. Since omap-aes/omap-des are the only users, this patch also convert them to the new cryptoengine API. Signed-off-by: Corentin Labbe <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-09-07crypto: engine - move crypto engine to its own headerCorentin LABBE1-0/+1
This patch move the whole crypto engine API to its own header crypto/engine.h. Signed-off-by: Corentin Labbe <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-09-07crypto: cryptd - initialize child shash_desc on importArd Biesheuvel1-2/+7
When calling .import() on a cryptd ahash_request, the structure members that describe the child transform in the shash_desc need to be initialized like they are when calling .init() Cc: [email protected] Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-31crypto: FIPS - allow tests to be disabled in FIPS modeStephan Mueller2-0/+13
In FIPS mode, additional restrictions may apply. If these restrictions are violated, the kernel will panic(). This patch allows test vectors for symmetric ciphers to be marked as to be skipped in FIPS mode. Together with the patch, the XTS test vectors where the AES key is identical to the tweak key is disabled in FIPS mode. This test vector violates the FIPS requirement that both keys must be different. Reported-by: Tapas Sarangi <[email protected]> Signed-off-by: Stephan Mueller <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-31crypto: xor - Fix warning when XOR_SELECT_TEMPLATE is unsetHerbert Xu1-4/+5
This patch fixes an unused label warning triggered when the macro XOR_SELECT_TEMPLATE is not set. Fixes: 39457acda913 ("crypto: xor - skip speed test if the xor...") Reported-by: Stephen Rothwell <[email protected]> Suggested-by: Stephen Rothwell <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-31crypto: cryptd - Use correct tfm object for AEAD trackingHerbert Xu1-1/+2
The AEAD code path incorrectly uses the child tfm to track the cryptd refcnt, and then potentially frees the child tfm. Fixes: 81760ea6a95a ("crypto: cryptd - Add helpers to check...") Reported-by: Sowmini Varadhan <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-24crypto: rsa - allow keys >= 2048 bits in FIPS modeStephan Mueller1-2/+2
With a public notification, NIST now allows the use of RSA keys with a modulus >= 2048 bits. The new rule allows any modulus size >= 2048 bits provided that either 2048 or 3072 bits are supported at least so that the entire RSA implementation can be CAVS tested. This patch fixes the inability to boot the kernel in FIPS mode, because certs/x509.genkey defines a 4096 bit RSA key per default. This key causes the RSA signature verification to fail in FIPS mode without the patch below. Signed-off-by: Stephan Mueller <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-24crypto: drbg - fix error return codeWei Yongjun1-5/+11
Fix to return a negative error code from the error handling case instead of 0. Signed-off-by: Wei Yongjun <[email protected]> Acked-by: Stephan Mueller <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-24crypto: xor - skip speed test if the xor function is selected automaticallyMartin Schwidefsky1-21/+19
If the architecture selected the xor function with XOR_SELECT_TEMPLATE the speed result of the do_xor_speed benchmark is of limited value. The speed measurement increases the bootup time a little, which can makes a difference for kernels used in container like virtual machines. Signed-off-by: Martin Schwidefsky <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-16crypto: drbg - do not call drbg_instantiate in healt testStephan Mueller1-11/+4
When calling the DRBG health test in FIPS mode, the Jitter RNG is not yet present in the kernel crypto API which will cause the instantiation to fail and thus the health test to fail. As the health tests cover the enforcement of various thresholds, invoke the functions that are supposed to enforce the thresholds directly. This patch also saves precious seed. Reported-by: Tapas Sarangi <[email protected]> Signed-off-by: Stephan Mueller <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-16crypto: xts - fix a little typoCorentin LABBE1-1/+1
The sentence 'Based on' is misspelled, respell it. Signed-off-by: LABBE Corentin <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-09crypto: testmgr - fix !x==y confusionYanjiang Jin1-5/+5
"if (!ret == template[i].fail)" is confusing to compilers (gcc5): crypto/testmgr.c: In function '__test_aead': crypto/testmgr.c:531:12: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!ret == template[i].fail) { ^ Let there be 'if (template[i].fail == !ret) '. Signed-off-by: Yanjiang Jin <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-09crypto: powerpc - CRYPT_CRC32C_VPMSUM should depend on ALTIVECMichael Ellerman1-1/+1
The optimised crc32c implementation depends on VMX (aka. Altivec) instructions, so the kernel must be built with Altivec support in order for the crc32c code to build. Fixes: 6dd7a82cc54e ("crypto: powerpc - Add POWER8 optimised crc32c") Acked-by: Anton Blanchard <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-08-08crypto: sha3 - Add missing ULL suffixes for 64-bit constantsGeert Uytterhoeven1-8/+8
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): crypto/sha3_generic.c:27: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:28: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type Fixes: 53964b9ee63b7075 ("crypto: sha3 - Add SHA-3 hash algorithm") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2016-07-27Merge tag 'random_for_linus' of ↵Linus Torvalds1-61/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random driver updates from Ted Ts'o: "A number of improvements for the /dev/random driver; the most important is the use of a ChaCha20-based CRNG for /dev/urandom, which is faster, more efficient, and easier to make scalable for silly/abusive userspace programs that want to read from /dev/urandom in a tight loop on NUMA systems. This set of patches also improves entropy gathering on VM's running on Microsoft Azure, and will take advantage of a hw random number generator (if present) to initialize the /dev/urandom pool" (It turns out that the random tree hadn't been in linux-next this time around, because it had been dropped earlier as being too quiet. Oh well). * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: strengthen input validation for RNDADDTOENTCNT random: add backtracking protection to the CRNG random: make /dev/urandom scalable for silly userspace programs random: replace non-blocking pool with a Chacha20-based CRNG random: properly align get_random_int_hash random: add interrupt callback to VMBus IRQ handler random: print a warning for the first ten uninitialized random users random: initialize the non-blocking pool via add_hwgenerator_randomness()
2016-07-26Merge branch 'linus' of ↵Linus Torvalds43-2521/+5343
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.8: API: - first part of skcipher low-level conversions - add KPP (Key-agreement Protocol Primitives) interface. Algorithms: - fix IPsec/cryptd reordering issues that affects aesni - RSA no longer does explicit leading zero removal - add SHA3 - add DH - add ECDH - improve DRBG performance by not doing CTR by hand Drivers: - add x86 AVX2 multibuffer SHA256/512 - add POWER8 optimised crc32c - add xts support to vmx - add DH support to qat - add RSA support to caam - add Layerscape support to caam - add SEC1 AEAD support to talitos - improve performance by chaining requests in marvell/cesa - add support for Araneus Alea I USB RNG - add support for Broadcom BCM5301 RNG - add support for Amlogic Meson RNG - add support Broadcom NSP SoC RNG" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits) crypto: vmx - Fix aes_p8_xts_decrypt build failure crypto: vmx - Ignore generated files crypto: vmx - Adding support for XTS crypto: vmx - Adding asm subroutines for XTS crypto: skcipher - add comment for skcipher_alg->base crypto: testmgr - Print akcipher algorithm name crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op crypto: nx - off by one bug in nx_of_update_msc() crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct crypto: scatterwalk - Inline start/map/done crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone crypto: scatterwalk - Fix test in scatterwalk_done crypto: api - Optimise away crypto_yield when hard preemption is on crypto: scatterwalk - add no-copy support to copychunks crypto: scatterwalk - Remove scatterwalk_bytes_sglen crypto: omap - Stop using crypto scatterwalk_bytes_sglen crypto: skcipher - Remove top-level givcipher interface crypto: user - Remove crypto_lookup_skcipher call crypto: cts - Convert to skcipher ...
2016-07-23Merge branch 'linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a sporadic build failure in the qat driver as well as a memory corruption bug in rsa-pkcs1pad" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct crypto: qat - make qat_asym_algs.o depend on asn1 headers
2016-07-22crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request structHerbert Xu1-2/+2
To allow for child request context the struct akcipher_request child_req needs to be at the end of the structure. Cc: [email protected] Signed-off-by: Tadeusz Struk <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.