| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When booting as a Xen PV dom0 the memory layout of the dom0 is
modified to match that of the host, as this requires less changes in
the kernel for supporting Xen.
There are some cases, though, which are problematic, as it is the Xen
hypervisor selecting the kernel's load address plus some other data,
which might conflict with the host's memory map.
These conflicts are detected at boot time and result in a boot error.
In order to support handling at least some of these conflicts in
future, introduce a generic helper function which will later gain the
ability to adapt the memory layout when possible.
Add the missing check for the xen_start_info area.
Note that possible p2m map and initrd memory conflicts are handled
already by copying the data to memory areas not conflicting with the
memory map. The initial stack allocated by Xen doesn't need to be
checked, as early boot code is switching to the statically allocated
initial kernel stack. Initial page tables and the kernel itself will
be handled later.
Signed-off-by: Juergen Gross <[email protected]>
Tested-by: Marek Marczykowski-Górecki <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
When running as a Xen PV dom0 the kernel is loaded by the hypervisor
using a different memory map than that of the host. In order to
minimize the required changes in the kernel, the kernel adapts its
memory map to that of the host. In order to do that it is checking
for conflicts of its load address with the host memory map.
Unfortunately the tested memory range does not include the .brk
area, which might result in crashes or memory corruption when this
area does conflict with the memory map of the host.
Fix the test by using the _end label instead of __bss_stop.
Fixes: 808fdb71936c ("xen: check for kernel memory conflicting with memory layout")
Signed-off-by: Juergen Gross <[email protected]>
Tested-by: Marek Marczykowski-Górecki <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
Set PFERR_GUEST_{FINAL,PAGE}_MASK based on EPT_VIOLATION_GVA_TRANSLATED if
and only if EPT_VIOLATION_GVA_IS_VALID is also set in exit qualification.
Per the SDM, bit 8 (EPT_VIOLATION_GVA_TRANSLATED) is valid if and only if
bit 7 (EPT_VIOLATION_GVA_IS_VALID) is set, and is '0' if bit 7 is '0'.
Bit 7 (a.k.a. EPT_VIOLATION_GVA_IS_VALID)
Set if the guest linear-address field is valid. The guest linear-address
field is valid for all EPT violations except those resulting from an
attempt to load the guest PDPTEs as part of the execution of the MOV CR
instruction and those due to trace-address pre-translation
Bit 8 (a.k.a. EPT_VIOLATION_GVA_TRANSLATED)
If bit 7 is 1:
• Set if the access causing the EPT violation is to a guest-physical
address that is the translation of a linear address.
• Clear if the access causing the EPT violation is to a paging-structure
entry as part of a page walk or the update of an accessed or dirty bit.
Reserved if bit 7 is 0 (cleared to 0).
Failure to guard the logic on GVA_IS_VALID results in KVM marking the page
fault as PFERR_GUEST_PAGE_MASK when there is no known GVA, which can put
the vCPU into an infinite loop due to kvm_mmu_page_fault() getting false
positive on its PFERR_NESTED_GUEST_PAGE logic (though only because that
logic is also buggy/flawed).
In practice, this is largely a non-issue because so GVA_IS_VALID is almost
always set. However, when TDX comes along, GVA_IS_VALID will *never* be
set, as the TDX Module deliberately clears bits 12:7 in exit qualification,
e.g. so that the faulting virtual address and other metadata that aren't
practically useful for the hypervisor aren't leaked to the untrusted host.
When exit is due to EPT violation, bits 12-7 of the exit qualification
are cleared to 0.
Fixes: eebed2438923 ("kvm: nVMX: Add support for fast unprotection of nested guest page tables")
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Use KVM_PAGES_PER_HPAGE() instead of open coding equivalent logic that is
anything but obvious.
No functional change intended, and verified by compiling with the below
assertions:
BUILD_BUG_ON((1UL << KVM_HPAGE_GFN_SHIFT(PG_LEVEL_4K)) !=
KVM_PAGES_PER_HPAGE(PG_LEVEL_4K));
BUILD_BUG_ON((1UL << KVM_HPAGE_GFN_SHIFT(PG_LEVEL_2M)) !=
KVM_PAGES_PER_HPAGE(PG_LEVEL_2M));
BUILD_BUG_ON((1UL << KVM_HPAGE_GFN_SHIFT(PG_LEVEL_1G)) !=
KVM_PAGES_PER_HPAGE(PG_LEVEL_1G));
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Replace all of the open coded '1' literals used to mark a PTE list as
having many/multiple entries with a proper define. It's hard enough to
read the code with one magic bit, and a future patch to support "locking"
a single rmap will add another.
No functional change intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Fold mmu_spte_age() into its sole caller now that aging and testing for
young SPTEs is handled in a common location, i.e. doesn't require more
helpers.
Opportunistically remove the use of mmu_spte_get_lockless(), as mmu_lock
is held (for write!), and marking SPTEs for access tracking outside of
mmu_lock is unsafe (at least, as written). I.e. using the lockless
accessor is quite misleading.
No functional change intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Rework kvm_handle_gfn_range() into an aging-specic helper,
kvm_rmap_age_gfn_range(). In addition to purging a bunch of unnecessary
boilerplate code, this sets the stage for aging rmap SPTEs outside of
mmu_lock.
Note, there's a small functional change, as kvm_test_age_gfn() will now
return immediately if a young SPTE is found, whereas previously KVM would
continue iterating over other levels.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Convert kvm_unmap_gfn_range(), which is the helper that zaps rmap SPTEs in
response to an mmu_notifier invalidation, to use __kvm_rmap_zap_gfn_range()
and feed in range->may_block. In other words, honor NEED_RESCHED by way of
cond_resched() when zapping rmaps. This fixes a long-standing issue where
KVM could process an absurd number of rmap entries without ever yielding,
e.g. if an mmu_notifier fired on a PUD (or larger) range.
Opportunistically rename __kvm_zap_rmap() to kvm_zap_rmap(), and drop the
old kvm_zap_rmap(). Ideally, the shuffling would be done in a different
patch, but that just makes the compiler unhappy, e.g.
arch/x86/kvm/mmu/mmu.c:1462:13: error: ‘kvm_zap_rmap’ defined but not used
Reported-by: Peter Xu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a dedicated helper to walk and zap rmaps for a given memslot so that
the code can be shared between KVM-initiated zaps and mmu_notifier
invalidations.
No functional change intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add a @can_yield param to __walk_slot_rmaps() to control whether or not
dropping mmu_lock and conditionally rescheduling is allowed. This will
allow using __walk_slot_rmaps() and thus cond_resched() to handle
mmu_notifier invalidations, which usually allow blocking/yielding, but not
when invoked by the OOM killer.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move walk_slot_rmaps() and friends up near for_each_slot_rmap_range() so
that the walkers can be used to handle mmu_notifier invalidations, and so
that similar function has some amount of locality in code.
No functional change intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
WARN if KVM gets an MMIO cache hit on a RET_PF_WRITE_PROTECTED fault, as
KVM should return RET_PF_WRITE_PROTECTED if and only if there is a memslot,
and creating a memslot is supposed to invalidate the MMIO cache by virtue
of changing the memslot generation.
Keep the code around mainly to provide a convenient location to document
why emulated MMIO should be impossible.
Suggested-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Explicitly query the list of to-be-zapped shadow pages when checking to
see if unprotecting a gfn for retry has succeeded, i.e. if KVM should
retry the faulting instruction.
Add a comment to explain why the list needs to be checked before zapping,
which is the primary motivation for this change.
No functional change intended.
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Fold kvm_mmu_unprotect_page() into kvm_mmu_unprotect_gfn_and_retry() now
that all other direct usage is gone.
No functional change intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Rename reexecute_instruction() to kvm_unprotect_and_retry_on_failure() to
make the intent and purpose of the helper much more obvious.
No functional change intended.
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
When retrying the faulting instruction after emulation failure, refresh
the infinite loop protection fields even if no shadow pages were zapped,
i.e. avoid hitting an infinite loop even when retrying the instruction as
a last-ditch effort to avoid terminating the guest.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Use kvm_mmu_unprotect_gfn_and_retry() in reexecute_instruction() to pick
up protection against infinite loops, e.g. if KVM somehow manages to
encounter an unsupported instruction and unprotecting the gfn doesn't
allow the vCPU to make forward progress. Other than that, the retry-on-
failure logic is a functionally equivalent, open coded version of
kvm_mmu_unprotect_gfn_and_retry().
Note, the emulation failure path still isn't fully protected, as KVM
won't update the retry protection fields if no shadow pages are zapped
(but this change is still a step forward). That flaw will be addressed
in a future patch.
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Don't bother unprotecting the target gfn if EMULTYPE_WRITE_PF_TO_SP is
set, as KVM will simply report the emulation failure to userspace. This
will allow converting reexecute_instruction() to use
kvm_mmu_unprotect_gfn_instead_retry() instead of kvm_mmu_unprotect_page().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Drop the manual pfn look when retrying an instruction that KVM failed to
emulation in response to a #PF due to a write-protected gfn. Now that KVM
sets EMULTYPE_ALLOW_RETRY_PF if and only if the page fault hit a write-
protected gfn, i.e. if and only if there's a writable memslot, there's no
need to redo the lookup to avoid retrying an instruction that failed on
emulated MMIO (no slot, or a write to a read-only slot).
I.e. KVM will never attempt to retry an instruction that failed on
emulated MMIO, whereas that was not the case prior to the introduction of
RET_PF_WRITE_PROTECTED.
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move the event re-injection unprotect+retry logic into
kvm_mmu_write_protect_fault(), i.e. unprotect and retry if and only if
the #PF actually hit a write-protected gfn. Note, there is a small
possibility that the gfn was unprotected by a different tasking between
hitting the #PF and acquiring mmu_lock, but in that case, KVM will resume
the guest immediately anyways because KVM will treat the fault as spurious.
As a bonus, unprotecting _after_ handling the page fault also addresses the
case where the installing a SPTE to handle fault encounters a shadowed PTE,
i.e. *creates* a read-only SPTE.
Opportunstically add a comment explaining what on earth the intent of the
code is, as based on the changelog from commit 577bdc496614 ("KVM: Avoid
instruction emulation when event delivery is pending").
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
When getting a gpa from a gva to unprotect the associated gfn when an
event is awating reinjection, walk the guest PTEs for WRITE as there's no
point in unprotecting the gfn if the guest is unable to write the page,
i.e. if write-protection can't trigger emulation.
Note, the entire flow should be guarded on the access being a write, and
even better should be conditioned on actually triggering a write-protect
fault. This will be addressed in a future commit.
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
If getting the gpa for a gva fails, e.g. because the gva isn't mapped in
the guest page tables, don't try to unprotect the invalid gfn. This is
mostly a performance fix (avoids unnecessarily taking mmu_lock), as
for_each_gfn_valid_sp_with_gptes() won't explode on garbage input, it's
simply pointless.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Now that retry_instruction() is reasonably tiny, fold it into its sole
caller, x86_emulate_instruction(). In addition to getting rid of the
absurdly confusing retry_instruction() name, handling the retry in
x86_emulate_instruction() pairs it back up with the code that resets
last_retry_{eip,address}.
No functional change intended.
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move the sanity checks for EMULTYPE_ALLOW_RETRY_PF to the top of
x86_emulate_instruction(). In addition to deduplicating a small amount
of code, this makes the connection between EMULTYPE_ALLOW_RETRY_PF and
EMULTYPE_PF even more explicit, and will allow dropping retry_instruction()
entirely.
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Try to unprotect shadow pages if and only if indirect_shadow_pages is non-
zero, i.e. iff there is at least one protected such shadow page. Pre-
checking indirect_shadow_pages avoids taking mmu_lock for write when the
gfn is write-protected by a third party, i.e. not for KVM shadow paging,
and in the *extremely* unlikely case that a different task has already
unprotected the last shadow page.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move the anti-infinite-loop protection provided by last_retry_{eip,addr}
into kvm_mmu_write_protect_fault() so that it guards unprotect+retry that
never hits the emulator, as well as reexecute_instruction(), which is the
last ditch "might as well try it" logic that kicks in when emulation fails
on an instruction that faulted on a write-protected gfn.
Add a new helper, kvm_mmu_unprotect_gfn_and_retry(), to set the retry
fields and deduplicate other code (with more to come).
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Store the gpa used to unprotect the faulting gfn for retry as a gpa_t, not
an unsigned long. This fixes a bug where 32-bit KVM would unprotect and
retry the wrong gfn if the gpa had bits 63:32!=0. In practice, this bug
is functionally benign, as unprotecting the wrong gfn is purely a
performance issue (thanks to the anti-infinite-loop logic). And of course,
almost no one runs 32-bit KVM these days.
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Read RIP from vCPU state instead of pulling it from the emulation context
when filling last_retry_eip, which is part of the anti-infinite-loop
protection used when unprotecting and retrying instructions that hit a
write-protected gfn.
This will allow reusing the anti-infinite-loop protection in flows that
never make it into the emulator.
No functional change intended, as ctxt->eip is set to kvm_rip_read() in
init_emulate_ctxt(), and EMULTYPE_PF emulation is mutually exclusive with
EMULTYPE_NO_DECODE and EMULTYPE_SKIP, i.e. always goes through
x86_decode_emulated_instruction() and hasn't advanced ctxt->eip (yet).
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Resume the guest and thus skip emulation of a non-PTE-writing instruction
if and only if unprotecting the gfn actually zapped at least one shadow
page. If the gfn is write-protected for some reason other than shadow
paging, attempting to unprotect the gfn will effectively fail, and thus
retrying the instruction is all but guaranteed to be pointless. This bug
has existed for a long time, but was effectively fudged around by the
retry RIP+address anti-loop detection.
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
When doing "fast unprotection" of nested TDP page tables, skip emulation
if and only if at least one gfn was unprotected, i.e. continue with
emulation if simply resuming is likely to hit the same fault and risk
putting the vCPU into an infinite loop.
Note, it's entirely possible to get a false negative, e.g. if a different
vCPU faults on the same gfn and unprotects the gfn first, but that's a
relatively rare edge case, and emulating is still functionally ok, i.e.
saving a few cycles by avoiding emulation isn't worth the risk of putting
the vCPU into an infinite loop.
Opportunistically rewrite the relevant comment to document in gory detail
exactly what scenario the "fast unprotect" logic is handling.
Fixes: 147277540bbc ("kvm: svm: Add support for additional SVM NPF error codes")
Cc: Yuan Yao <[email protected]>
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Trigger KVM's various "unprotect gfn" paths if and only if the page fault
was a write to a write-protected gfn. To do so, add a new page fault
return code, RET_PF_WRITE_PROTECTED, to explicitly and precisely track
such page faults.
If a page fault requires emulation for any MMIO (or any reason besides
write-protection), trying to unprotect the gfn is pointless and risks
putting the vCPU into an infinite loop. E.g. KVM will put the vCPU into
an infinite loop if the vCPU manages to trigger MMIO on a page table walk.
Fixes: 147277540bbc ("kvm: svm: Add support for additional SVM NPF error codes")
Reviewed-by: Yuan Yao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Drop the globally visible PFERR_NESTED_GUEST_PAGE and replace it with a
more appropriately named is_write_to_guest_page_table(). The macro name
is misleading, because while all nNPT walks match PAGE|WRITE|PRESENT, the
reverse is not true.
No functional change intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Add lockdep assertions in get_vmcs12() and get_shadow_vmcs12() to verify
the vCPU's mutex is held, as the returned VMCS objects are dynamically
allocated/freed when nested VMX is turned on/off, i.e. accessing vmcs12
structures without holding vcpu->mutex is susceptible to use-after-free.
Waive the assertion if the VM is being destroyed, as KVM currently forces
a nested VM-Exit when freeing the vCPU. If/when that wart is fixed, the
assertion can/should be converted to an unqualified lockdep assertion.
See also https://lore.kernel.org/all/[email protected].
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Explicitly invalidate posted_intr_nv when emulating nested VM-Enter and
posted interrupts are disabled to make it clear that posted_intr_nv is
valid if and only if nested posted interrupts are enabled, and as a cheap
way to harden against KVM bugs.
KVM initializes posted_intr_nv to -1 at vCPU creation and resets it to -1
when unloading vmcs12 and/or leaving nested mode, i.e. this is not a bug
fix (or at least, it's not intended to be a bug fix).
Note, tracking nested.posted_intr_nv as a u16 subtly adds a measure of
safety, as it prevents unintentionally matching KVM's informal "no IRQ"
vector of -1, stored as a signed int. Because a u16 can be always be
represented as a signed int, the effective "invalid" value of
posted_intr_nv, 65535, will be preserved as-is when comparing against an
int, i.e. will be zero-extended, not sign-extended, and thus won't get a
false positive if KVM is buggy and compares posted_intr_nv against -1.
Opportunistically add a comment in vmx_deliver_nested_posted_interrupt()
to call out that it must check vmx->nested.posted_intr_nv, not the vector
in vmcs12, which is presumably the _entire_ reason nested.posted_intr_nv
exists. E.g. vmcs12 is a KVM-controlled snapshot, so there are no TOCTOU
races to worry about, the only potential badness is if the vCPU leaves
nested and frees vmcs12 between the sender checking is_guest_mode() and
dereferencing the vmcs12 pointer.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Fold kvm_get_apic_interrupt() into kvm_cpu_get_interrupt() now that nVMX
essentially open codes kvm_get_apic_interrupt() in order to correctly
emulate nested posted interrupts.
Opportunistically stop exporting kvm_cpu_get_interrupt(), as the
aforementioned nVMX flow was the only user in vendor code.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
When synthensizing a nested VM-Exit due to an external interrupt, pend a
nested posted interrupt if the external interrupt vector matches L2's PI
notification vector, i.e. if the interrupt is a PI notification for L2.
This fixes a bug where KVM will incorrectly inject VM-Exit instead of
processing nested posted interrupt when IPI virtualization is enabled.
Per the SDM, detection of the notification vector doesn't occur until the
interrupt is acknowledge and deliver to the CPU core.
If the external-interrupt exiting VM-execution control is 1, any unmasked
external interrupt causes a VM exit (see Section 26.2). If the "process
posted interrupts" VM-execution control is also 1, this behavior is
changed and the processor handles an external interrupt as follows:
1. The local APIC is acknowledged; this provides the processor core
with an interrupt vector, called here the physical vector.
2. If the physical vector equals the posted-interrupt notification
vector, the logical processor continues to the next step. Otherwise,
a VM exit occurs as it would normally due to an external interrupt;
the vector is saved in the VM-exit interruption-information field.
For the most part, KVM has avoided problems because a PI NV for L2 that
arrives will L2 is active will be processed by hardware, and KVM checks
for a pending notification vector during nested VM-Enter. Thus, to hit
the bug, the PI NV interrupt needs to sneak its way into L1's vIRR while
L2 is active.
Without IPI virtualization, the scenario is practically impossible to hit,
modulo L1 doing weird things (see below), as the ordering between
vmx_deliver_posted_interrupt() and nested VM-Enter effectively guarantees
that either the sender will see the vCPU as being in_guest_mode(), or the
receiver will see the interrupt in its vIRR.
With IPI virtualization, introduced by commit d588bb9be1da ("KVM: VMX:
enable IPI virtualization"), the sending CPU effectively implements a rough
equivalent of vmx_deliver_posted_interrupt(), sans the nested PI NV check.
If the target vCPU has a valid PID, the CPU will send a PI NV interrupt
based on _L1's_ PID, as the sender's because IPIv table points at L1 PIDs.
PIR := 32 bytes at PID_ADDR;
// under lock
PIR[V] := 1;
store PIR at PID_ADDR;
// release lock
NotifyInfo := 8 bytes at PID_ADDR + 32;
// under lock
IF NotifyInfo.ON = 0 AND NotifyInfo.SN = 0; THEN
NotifyInfo.ON := 1;
SendNotify := 1;
ELSE
SendNotify := 0;
FI;
store NotifyInfo at PID_ADDR + 32;
// release lock
IF SendNotify = 1; THEN
send an IPI specified by NotifyInfo.NDST and NotifyInfo.NV;
FI;
As a result, the target vCPU ends up receiving an interrupt on KVM's
POSTED_INTR_VECTOR while L2 is running, with an interrupt in L1's PIR for
L2's nested PI NV. The POSTED_INTR_VECTOR interrupt triggers a VM-Exit
from L2 to L0, KVM moves the interrupt from L1's PIR to vIRR, triggers a
KVM_REQ_EVENT prior to re-entry to L2, and calls vmx_check_nested_events(),
effectively bypassing all of KVM's "early" checks on nested PI NV.
Without IPI virtualization, the bug can likely be hit only if L1 programs
an assigned device to _post_ an interrupt to L2's notification vector, by
way of L1's PID.PIR. Doing so would allow the interrupt to get into L1's
vIRR without KVM checking vmcs12's NV. Which is architecturally allowed,
but unlikely behavior for a hypervisor.
Cc: Zeng Guang <[email protected]>
Reviewed-by: Chao Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
In the should-be-impossible scenario that kvm_cpu_get_interrupt() doesn't
return a valid vector after checking kvm_cpu_has_interrupt(), skip VM-Exit
injection to reduce the probability of crashing/confusing L1. Now that
KVM gets the IRQ _before_ calling nested_vmx_vmexit(), squashing the
VM-Exit injection is trivial since there are no actions that need to be
undone.
Reviewed-by: Chao Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move the logic to get the to-be-acknowledge IRQ for a nested VM-Exit from
nested_vmx_vmexit() to vmx_check_nested_events(), which is subtly the one
and only path where KVM invokes nested_vmx_vmexit() with
EXIT_REASON_EXTERNAL_INTERRUPT. A future fix will perform a last-minute
check on L2's nested posted interrupt notification vector, just before
injecting a nested VM-Exit. To handle that scenario correctly, KVM needs
to get the interrupt _before_ injecting VM-Exit, as simply querying the
highest priority interrupt, via kvm_cpu_has_interrupt(), would result in
TOCTOU bug, as a new, higher priority interrupt could arrive between
kvm_cpu_has_interrupt() and kvm_cpu_get_interrupt().
Unfortunately, simply moving the call to kvm_cpu_get_interrupt() doesn't
suffice, as a VMWRITE to GUEST_INTERRUPT_STATUS.SVI is hiding in
kvm_get_apic_interrupt(), and acknowledging the interrupt before nested
VM-Exit would cause the VMWRITE to hit vmcs02 instead of vmcs01.
Open code a rough equivalent to kvm_cpu_get_interrupt() so that the IRQ
is acknowledged after emulating VM-Exit, taking care to avoid the TOCTOU
issue described above.
Opportunistically convert the WARN_ON() to a WARN_ON_ONCE(). If KVM has
a bug that results in a false positive from kvm_cpu_has_interrupt(),
spamming dmesg won't help the situation.
Note, nested_vmx_reflect_vmexit() can never reflect external interrupts as
they are always "wanted" by L0.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Split the "ack" phase, i.e. the movement of an interrupt from IRR=>ISR,
out of kvm_get_apic_interrupt() and into a separate API so that nested
VMX can acknowledge a specific interrupt _after_ emulating a VM-Exit from
L2 to L1.
To correctly emulate nested posted interrupts while APICv is active, KVM
must:
1. find the highest pending interrupt.
2. check if that IRQ is L2's notification vector
3. emulate VM-Exit if the IRQ is NOT the notification vector
4. ACK the IRQ in L1 _after_ VM-Exit
When APICv is active, the process of moving the IRQ from the IRR to the
ISR also requires a VMWRITE to update vmcs01.GUEST_INTERRUPT_STATUS.SVI,
and so acknowledging the interrupt before switching to vmcs01 would result
in marking the IRQ as in-service in the wrong VMCS.
KVM currently fudges around this issue by doing kvm_get_apic_interrupt()
smack dab in the middle of emulating VM-Exit, but that hack doesn't play
nice with nested posted interrupts, as notification vector IRQs don't
trigger a VM-Exit in the first place.
Cc: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
When SGX EDECCSSA support was added to KVM in commit 16a7fe3728a8
("KVM/VMX: Allow exposing EDECCSSA user leaf function to KVM guest"), it
forgot to clear the X86_FEATURE_SGX_EDECCSSA bit in KVM CPU caps when
KVM SGX is disabled. Fix it.
Fixes: 16a7fe3728a8 ("KVM/VMX: Allow exposing EDECCSSA user leaf function to KVM guest")
Signed-off-by: Kai Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Commit 238adc77051a ("KVM: Cleanup LAPIC interface") removed
kvm_lapic_get_base() but leave declaration.
And other two declarations were never implenmented since introduction.
Signed-off-by: Yue Haibing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Leave nested mode before synthesizing shutdown (a.k.a. TRIPLE_FAULT) if
RSM fails when resuming L2 (a.k.a. guest mode). Architecturally, shutdown
on RSM occurs _before_ the transition back to guest mode on both Intel and
AMD.
On Intel, per the SDM pseudocode, SMRAM state is loaded before critical
VMX state:
restore state normally from SMRAM;
...
CR4.VMXE := value stored internally;
IF internal storage indicates that the logical processor had been in
VMX operation (root or non-root)
THEN
enter VMX operation (root or non-root);
restore VMX-critical state as defined in Section 32.14.1;
...
restore current VMCS pointer;
FI;
AMD's APM is both less clearcut and more explicit. Because AMD CPUs save
VMCB and guest state in SMRAM itself, given the lack of anything in the
APM to indicate a shutdown in guest mode is possible, a straightforward
reading of the clause on invalid state is that _what_ state is invalid is
irrelevant, i.e. all roads lead to shutdown.
An RSM causes a processor shutdown if an invalid-state condition is
found in the SMRAM state-save area.
This fixes a bug found by syzkaller where synthesizing shutdown for L2
led to a nested VM-Exit (if L1 is intercepting shutdown), which in turn
caused KVM to complain about trying to cancel a nested VM-Enter (see
commit 759cbd59674a ("KVM: x86: nSVM/nVMX: set nested_run_pending on VM
entry which is a result of RSM").
Note, Paolo pointed out that KVM shouldn't set nested_run_pending until
after loading SMRAM state. But as above, that's only half the story, KVM
shouldn't transition to guest mode either. Unfortunately, fixing that
mess requires rewriting the nVMX and nSVM RSM flows to not piggyback
their nested VM-Enter flows, as executing the nested VM-Enter flows after
loading state from SMRAM would clobber much of said state.
For now, add a FIXME to call out that transitioning to guest mode before
loading state from SMRAM is wrong.
Link: https://lore.kernel.org/all/CABgObfYaUHXyRmsmg8UjRomnpQ0Jnaog9-L2gMjsjkqChjDYUQ@mail.gmail.com
Reported-by: [email protected]
Closes: https://lore.kernel.org/all/[email protected]
Reported-by: Zheyu Ma <[email protected]>
Closes: https://lore.kernel.org/all/CAMhUBjmXMYsEoVYw_M8hSZjBMHh24i88QYm-RY6HDta5YZ7Wgw@mail.gmail.com
Analyzed-by: Michal Wilczynski <[email protected]>
Cc: Kishen Maloor <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all pwm drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
VFIO_EEH_PE_INJECT_ERR ioctl is currently failing on pseries
due to missing implementation of err_inject eeh_ops for pseries.
This patch implements pseries_eeh_err_inject in eeh_ops/pseries
eeh_ops. Implements support for injecting MMIO load/store error
for testing from user space.
The check on PCI error type (bus type) code is moved to platform
code, since the eeh_pe_inject_err can be allowed to more error
types depending on platform requirement. Removal of the check for
'type' in eeh_pe_inject_err() doesn't impact PowerNV as
pnv_eeh_err_inject() already has an equivalent check in place.
Signed-off-by: Narayana Murty N <[email protected]>
Reviewed-by: Vaibhav Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
There are some spelling mistakes of 'retun' in comments which
should be instead of 'return'.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: WangYuli <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
In preparation for using vm_flags to ensure guard pages for shadow stacks
supply them as an argument to generic_get_unmapped_area(). The only user
outside of the core code is the PowerPC book3s64 implementation which is
trivially wrapping the generic implementation in the radix_enabled() case.
No functional changes.
Link: https://lkml.kernel.org/r/20240904-mm-generic-shadow-stack-guard-v2-2-a46b8b6dc0ed@kernel.org
Signed-off-by: Mark Brown <[email protected]>
Acked-by: Lorenzo Stoakes <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Acked-by: Michael Ellerman <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Andreas Larsson <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: "Edgecombe, Rick P" <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Naveen N Rao <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: WANG Xuerui <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm: Care about shadow stack guard gap when getting an
unmapped area", v2.
As covered in the commit log for c44357c2e76b ("x86/mm: care about shadow
stack guard gap during placement") our current mmap() implementation does
not take care to ensure that a new mapping isn't placed with existing
mappings inside it's own guard gaps. This is particularly important for
shadow stacks since if two shadow stacks end up getting placed adjacent to
each other then they can overflow into each other which weakens the
protection offered by the feature.
On x86 there is a custom arch_get_unmapped_area() which was updated by the
above commit to cover this case by specifying a start_gap for allocations
with VM_SHADOW_STACK. Both arm64 and RISC-V have equivalent features and
use the generic implementation of arch_get_unmapped_area() so let's make
the equivalent change there so they also don't get shadow stack pages
placed without guard pages. The arm64 and RISC-V shadow stack
implementations are currently on the list:
https://lore.kernel.org/r/20240829-arm64-gcs-v12-0-42fec94743
https://lore.kernel.org/lkml/[email protected]/
Given the addition of the use of vm_flags in the generic implementation we
also simplify the set of possibilities that have to be dealt with in the
core code by making arch_get_unmapped_area() take vm_flags as standard.
This is a bit invasive since the prototype change touches quite a few
architectures but since the parameter is ignored the change is
straightforward, the simplification for the generic code seems worth it.
This patch (of 3):
When we introduced arch_get_unmapped_area_vmflags() in 961148704acd ("mm:
introduce arch_get_unmapped_area_vmflags()") we did so as part of properly
supporting guard pages for shadow stacks on x86_64, which uses a custom
arch_get_unmapped_area(). Equivalent features are also present on both
arm64 and RISC-V, both of which use the generic implementation of
arch_get_unmapped_area() and will require equivalent modification there.
Rather than continue to deal with having two versions of the functions
let's bite the bullet and have all implementations of
arch_get_unmapped_area() take vm_flags as a parameter.
The new parameter is currently ignored by all implementations other than
x86. The only caller that doesn't have a vm_flags available is
mm_get_unmapped_area(), as for the x86 implementation and the wrapper used
on other architectures this is modified to supply no flags.
No functional changes.
Link: https://lkml.kernel.org/r/20240904-mm-generic-shadow-stack-guard-v2-0-a46b8b6dc0ed@kernel.org
Link: https://lkml.kernel.org/r/20240904-mm-generic-shadow-stack-guard-v2-1-a46b8b6dc0ed@kernel.org
Signed-off-by: Mark Brown <[email protected]>
Acked-by: Lorenzo Stoakes <[email protected]>
Reviewed-by: Liam R. Howlett <[email protected]>
Acked-by: Helge Deller <[email protected]> [parisc]
Cc: Alexander Gordeev <[email protected]>
Cc: Andreas Larsson <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: "Edgecombe, Rick P" <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Naveen N Rao <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: WANG Xuerui <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Paul Walmsley <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: [email protected]
Signed-off-by: Heikki Krogerus <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Alexandre Belloni <[email protected]>
Cc: [email protected]
Cc: Thomas Bogendoerfer <[email protected]>
Cc: [email protected]
Signed-off-by: Heikki Krogerus <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Signed-off-by: Heikki Krogerus <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|