| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Initialize audio PLL1 as the parent clock for 8kHz series rates,
audio PLL2 as the parent clock for 11kHz series rates. that PLL1
and PLL2 can together support full range of audio sample rates.
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- A couple of fixes for regressions resulting from the uncoupling of
physical vs virtual kernel address spaces: fix the mapping of the
kernel image using large pages; enforce alignment checks on physical
addresses before creating large pages
- Update defconfigs
* tag 's390-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Restore mapping of kernel image using large pages
s390/mm: Allow large pages only for aligned physical addresses
s390: Update defconfigs
|
|
Now that the layout of the structures is compatible with 1.1 it is time
to probe the 1.1 version of the FF-A protocol inside the hypervisor. If
the TEE doesn't support it, it should return the minimum supported
version.
Signed-off-by: Sebastian Ene <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Tested-by: Sudeep Holla <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
The FF-A spec 1.2 reserves the following ranges for identifying FF-A
calls:
0x84000060-0x840000FF: FF-A 32-bit calls
0xC4000060-0xC40000FF: FF-A 64-bit calls.
Use the range identification according to the spec and allow calls that
are currently out of the range(eg. FFA_MSG_SEND_DIRECT_REQ2) to be
identified correctly.
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Sebastian Ene <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Tested-by: Sudeep Holla <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Handle the FFA_PARTITION_INFO_GET host call inside the pKVM hypervisor
and copy the response message back to the host buffers.
Signed-off-by: Sebastian Ene <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Tested-by: Sudeep Holla <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
The pKVM hypervisor initializes with FF-A version 1.0. The spec requires
that no other FF-A calls to be issued before the version negotiation
phase is complete. Split the hypervisor proxy initialization code in two
parts so that we can move the later one after the host negotiates its
version.
Without trapping the call, the host drivers can negotiate a higher
version number with TEE which can result in a different memory layout
described during the memory sharing calls.
Signed-off-by: Sebastian Ene <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Tested-by: Sudeep Holla <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
The Fine Grained Trap extension is pretty messy as it doesn't
consistently use the same polarity for all trap bits. A bunch
of them, added later in the life of the architecture, have a
*negative* priority.
So if these bits are disabled, they must be RES1 and not RES0.
But that's not what the code implements, making the traps for
these negative trap bits being always on instead of disabled.
Fix the relevant bits, and stick a brown paper bag on my head
for the rest of the day...
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Add an early_params to control WFI and WFE trapping. This is to
control the degree guests can wait for interrupts on their own without
being trapped by KVM. Options for each param are trap and notrap. trap
enables the trap. notrap disables the trap. Note that when enabled,
traps are allowed but not guaranteed by the CPU architecture. Absent
an explicitly set policy, default to current behavior: disabling the
trap if only a single task is running and enabling otherwise.
Signed-off-by: Colton Lewis <[email protected]>
Reviewed-by: Jing Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ oliver: rework kvm_vcpu_should_clear_tw*() for readability ]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Avoid needlessly reacquiring the RCU read lock if the TDP MMU fails to
allocate a shadow page during eager page splitting. Opportunistically
drop the local variable ret as well now that it's no longer necessary.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Move the implementation of tdp_mmu_alloc_sp_for_split() to its one and
only caller to reduce unnecessary nesting and make it more clear why the
eager split loop continues after allocating a new SP.
Opportunistically drop the double-underscores from
__tdp_mmu_alloc_sp_for_split() now that its parent is gone.
No functional change intended.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Now that the GFP_NOWAIT case is gone, hard code GFP_KERNEL_ACCOUNT when
allocating shadow pages during eager page splitting in the TDP MMU.
Opportunistically replace use of __GFP_ZERO with allocations that zero
to improve readability.
No functional change intended.
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Always drop mmu_lock to allocate shadow pages in the TDP MMU when doing
eager page splitting. Dropping mmu_lock during eager page splitting is
cheap since KVM does not have to flush remote TLBs, and avoids stalling
vCPU threads that are taking page faults while KVM is eager splitting
under mmu_lock held for write.
This change reduces 20%+ dips in MySQL throughput during live migration
in a 160 vCPU VM while userspace is issuing CLEAR_DIRTY_LOG ioctls
(tested with 1GiB and 8GiB CLEARs). Userspace could issue finer-grained
CLEARs, which would also reduce contention on mmu_lock, but doing so
will increase the rate of remote TLB flushing, since KVM must flush TLBs
before returning from CLEAR_DITY_LOG.
When there isn't contention on mmu_lock[1], this change does not regress
the time it takes to perform eager page splitting (the cost of releasing
and re-acquiring an uncontended lock is minimal on x86).
[1] Tested with dirty_log_perf_test, which does not run vCPUs during
eager page splitting, and with a 16 vCPU VM Live Migration with
manual-protect disabled (where mmu_lock is held for read).
Cc: Bibo Mao <[email protected]>
Cc: Sean Christopherson <[email protected]>
Signed-off-by: David Matlack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Reword the BUILD_BUG_ON() comment in the legacy #PF handler to explicitly
describe how asserting that synthetic PFERR flags are limited to bits 31:0
protects KVM against inadvertently passing a synthetic flag to the common
page fault handler.
No functional change intended.
Suggested-by: Xiaoyao Li <[email protected]>
Reviewed-by: Xiaoyao Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
A few drivers optimistically try to support discard, write zeroes and
secure erase and disable the features from the I/O completion handler
if the hardware can't support them. This disable can't be done using
the atomic queue limits API because the I/O completion handlers can't
take sleeping locks or freeze the queue. Keep the existing clearing
of the relevant field to zero, but replace the old blk_queue_max_*
APIs with new disable APIs that force the value to 0.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Nitesh Shetty <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Discard and Write Zeroes are different operation and implemented
by different fallocate opcodes for ubd. If one fails the other one
can work and vice versa.
Split the code to disable the operations in ubd_handler to only
disable the operation that actually failed.
Fixes: 50109b5a03b4 ("um: Add support for DISCARD in the UBD Driver")
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Acked-By: Anton Ivanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Instead of a separate handler function that leaves no work in the
interrupt hanler itself, split out a per-request end I/O helper and
clean up the coding style and variable naming while we're at it.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Acked-By: Anton Ivanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
That function is only used when the kernel is compiled with FORTIFY_SOURCE and
when the kernel proper string.h header is used. The decompressor code doesn't
use the kernel proper header but has local copy which doesn't contain any
fortified implementations of the various string functions. As such
__fortify_panic() can never be called from the decompressor so remove it.
Signed-off-by: Nikolay Borisov <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Cross-merge networking fixes after downstream PR.
No conflicts, no adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Fix validation of NUMA coverage.
memblock_validate_numa_coverage() was checking for a unset node ID
using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was
specified by buggy firmware.
Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()"
* tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node()
memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
|
|
The routine is used on syscall exit and on non-AMD CPUs is guaranteed to
be empty.
It probably does not need to be a function call even on CPUs which do need the
mitigation.
[ bp: Make sure it is always inlined so that noinstr marking works. ]
Signed-off-by: Mateusz Guzik <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/arm64/kernel/arm64-reloc-test.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The ACPI FFH Opregion code can be moved out of arm64 arch code as
it just uses SMCCC. Move all the ACPI FFH Opregion code into
drivers/acpi/arm64/ffh.c
Signed-off-by: Sudeep Holla <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Hanjun Guo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The ACPI cpuidle LPI FFH code can be moved out of arm64 arch code as
it just uses SMCCC. Move all the ACPI cpuidle LPI FFH code into
drivers/acpi/arm64/cpuidle.c
Signed-off-by: Sudeep Holla <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Hanjun Guo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The SK-AM64 board has two TMP100 temperature sensors, add these here.
Signed-off-by: Andrew Davis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
This is a re-commit of
da05b143a308 ("x86/boot: Don't add the EFI stub to targets")
after the tagged patch incorrectly reverted it.
vmlinux-objs-y is added to targets, with an assumption that they are all
relative to $(obj); adding a $(objtree)/drivers/... path causes the
build to incorrectly create a useless
arch/x86/boot/compressed/drivers/... directory tree.
Fix this just by using a different make variable for the EFI stub.
Fixes: cb8bda8ad443 ("x86/boot/compressed: Rename efi_thunk_64.S to efi-mixed.S")
Signed-off-by: Ben Segall <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Cc: [email protected] # v6.1+
Link: https://lore.kernel.org/r/[email protected]
|
|
This reverts commit 277a0363120276645ae598d8d5fea7265e076ae9.
While fixing old boards with broken DTs, this change will break
newer ones with correct gpio polarity annotation.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Add the accelerometer and magnetometer that are present on the Motorola
Moto G (2013) device.
Signed-off-by: Stanislav Jakubek <[email protected]>
Link: https://lore.kernel.org/r/ZmWMh6fuLasvGkR/@standask-GA-A55M-S2HP
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Enable sound and modem for Acer Iconia Talk S A1-724.
The setup is similar to most MSM8916 devices, i.e.:
- QDSP6 audio
- Earpiece/headphones/microphones via digital/analog codec in
MSM8916/PM8916
- WWAN Internet via BAM-DMUX
Signed-off-by: Raymond Hackley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Enable the A702 GPU (also marketed as "3D accelerator by qcom [1], lol).
[1] https://docs.qualcomm.com/bundle/publicresource/87-61720-1_REV_A_QUALCOMM_ROBOTICS_RB1_PLATFORM__QUALCOMM_QRB2210__PRODUCT_BRIEF.pdf
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Describe the GPU hardware on the QCM2290.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Specify the file name for the squashed/non-split firmware with the .mbn
extension instead of the split .mdt. The kernel can load both but the
squashed version is preferred in dts nowadays.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Pull ARM and clkdev fixes from Russell King:
- Fix clkdev - erroring out on long strings causes boot failures, so
don't do this. Still warn about the over-sized strings (which will
never match and thus their registration with clkdev is useless)
- Fix for ftrace with frame pointer unwinder with recent GCC changing
the way frames are stacked.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9405/1: ftrace: Don't assume stack frames are contiguous in memory
clkdev: don't fail clkdev_alloc() if over-sized
|
|
Add support for StarFive JH7110 SoC and VisionFive 2 board.
- Cache
- Temperature sensor
- PMIC (AXP15060)
- Ethernet PHY (YT8531)
- Restart GPIO
- RNG
- I2C
- SPI
- Quad SPI
- PCIe
- USB & USB 2.0 PHY & PCIe 2.0/USB 3.0 PHY
- Audio (I2S / TDM / PWM-DAC)
- MIPI-CSI2 RX & D-PHY RX
Signed-off-by: Hal Feng <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>
|
|
Enable the TI LP873X PMIC configs for the PHYTEC am642-phyboard-electra
board.
Signed-off-by: Nathan Morrisson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
The USB controller on TI SoCs such as AM65x needs the
USB2 PHY driver to communicate with VBUS/ID comparator.
So enable the OMAP USB2 PHY driver.
Signed-off-by: Ravi Gunasekaran <[email protected]>
Signed-off-by: Siddharth Vadapalli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
TI Jacinto 7 SoCs (J721E, J7200) have Hyperbus controllers present
which can be used to interface with Hyperflash and HyperRAM storage
devices. Enable the necessary configs for Hyperbus support within
the MTD subsystem and the specific Hyperbus controller as module.
Signed-off-by: Vaishnav Achath <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
The AM69-SK board has 3 instances of PCIe namely PCIe0, PCIe1 and PCIe3.
The x4 PCIe0 instance is connected to a Card Edge connector via SERDES1.
The x2 PCIe1 instance is connected to an M.2 M Key connector via SERDES0.
The x1 PCIe3 instance is connected to an M.2 E Key connector via SERDES0.
Add device-tree support for enabling all 3 PCIe instances in Root-Complex
mode of operation.
Signed-off-by: Dasnavis Sabiya <[email protected]>
Signed-off-by: Siddharth Vadapalli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
Add overlay to enable the PCIe0 and PCIe1 instances of PCIe on J784S4-EVM
in Endpoint mode of operation.
Signed-off-by: Siddharth Vadapalli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
Enable PCIe0 and PCIe1 instances of PCIe in Root Complex mode of
operation on J784S4 EVM. The lanes of PCIe0 are connected to Serdes1
instance of Serdes while the lanes of PCIe1 are connected to Serdes0
instance of Serdes in J784S4 SoC. Despite both PCIe instances supporting
up to 4 Lanes, since the physical connections to the PCIe connector
corresponding to the PCIe1 instance of PCIe are limited to 2 Lanes on
the J784S4 EVM, update the "num-lanes" property of PCIe1 accordingly.
Signed-off-by: Siddharth Vadapalli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
TI's J784S4 SoC has four instances of Gen3 PCIe Controllers namely
PCIe0, PCIe1, PCIe2 and PCIe3. PCIe0 and PCIe1 are 4-Lane controllers
while PCIe2 and PCIe3 are 2-Lane controllers.
Add support for the Root Complex Mode of operation of these PCIe instances.
Signed-off-by: Siddharth Vadapalli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
Add the "ethernet-mac-syscon" node within "wkup_conf" node corresponding to
the CTRLMMR_MAC_IDx registers within the CTRL_MMR space. Assign the
compatible "ti,am62p-cpsw-mac-efuse" to enable "syscon_regmap" operations
on these registers. The MAC Address programmed in the eFuse is accessible
through the CTRLMMR_MAC_IDx registers. The "ti,syscon-efuse" device-tree
property points to the CTRLMMR_MAC_IDx registers, allowing the CPSW driver
to fetch the MAC Address and assign it to the network interface associated
with CPSW3G MAC Port 1.
Signed-off-by: Siddharth Vadapalli <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
1.4 GHz
The am625 is capable of running at 1.4 GHz when VDD_CORE is increased
from 0.75V to 0.85V. Increasing the voltage while the AM625 is
running has not been validated by TI, so we provide an overlay so that
people may choose to run at 1.4 GHz if they need the additional
performance.
Signed-off-by: Nathan Morrisson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
On SK-AM62P, McASP1 uses two pins for communicating with the codec over
I2S protocol. One of these pins (AXR0) is used for audio playback (TX)
so the direction of the pin should be OUTPUT.
Fixes: c00504ea42c0 ("arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM")
Signed-off-by: Jai Luthra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
McASP AFIFOs are not necessary with UDMA-P/BCDMA as there is buffering
on the DMA IP. Drop these for better audio latency.
Fixes: 28c0cf16b308 ("arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add Audio Codec")
Signed-off-by: Jai Luthra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
McASP AFIFOs are not necessary with UDMA-P/BCDMA as there is buffering
on the DMA IP. Drop these for better audio latency.
Fixes: 316b80246b16 ("arm64: dts: ti: add verdin am62")
Acked-by: Francesco Dolcini <[email protected]>
Signed-off-by: Jai Luthra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
McASP AFIFOs are not necessary with UDMA-P/BCDMA as there is buffering
on the DMA IP. Drop these for better audio latency.
Fixes: 1f7226a5e52c ("arm64: dts: ti: k3-am625-beagleplay: Add HDMI support")
Signed-off-by: Jai Luthra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
McASP AFIFOs are not necessary with UDMA-P/BCDMA as there is buffering
on the DMA IP. Drop these for better audio latency.
Fixes: c00504ea42c0 ("arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM")
Signed-off-by: Jai Luthra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
McASP AFIFOs are not necessary with UDMA-P/BCDMA as there is buffering
on the DMA IP. Drop these for better audio latency.
Fixes: 4a2c5dddf9e9 ("arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A")
Signed-off-by: Jai Luthra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
McASP AFIFOs are not necessary with UDMA-P/BCDMA as there is buffering
on the DMA IP. Drop these for better audio latency.
Fixes: b94b43715e91 ("arm64: dts: ti: Enable audio on SK-AM62(-LP)")
Signed-off-by: Jai Luthra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|
|
Add device tree overlay to enable both ICSSG1 ports available on AM64x-EVM
in MII mode.
Signed-off-by: MD Danish Anwar <[email protected]>
Reviewed-by: Ravi Gunasekaran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>
|