| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot,
at least over nfs, with:
Failed to mount /dev: No such device
Configuring DEVTMPFS fixes it.
Signed-off-by: Kim Phillips <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
|
|
run make savedefconfig on fsl defconfigs.
Signed-off-by: Kim Phillips <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
|
|
Small platform specific bug fixes for problems found in randconfig builds.
* randconfig/mach:
ARM: ux500: don't select LEDS_GPIO for snowball
ARM: imx: build i.MX6 functions only when needed
ARM: imx: select CPU_FREQ_TABLE when needed
ARM: imx: fix ksz9021rn_phy_fixup
ARM: imx: build pm-imx5 code only when PM is enabled
ARM: omap: allow building omap44xx without SMP
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Using 'select' in Kconfig is hard, a platform cannot just
enable a driver without also making sure that its subsystem
is there. Also, there is no actual code dependency between
the platform and the gpio leds driver.
Without this patch, building without LEDS_CLASS esults in:
drivers/built-in.o: In function `create_gpio_led.part.2':
governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register'
drivers/built-in.o: In function `gpio_led_remove':
governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister'
This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio
support for Snowball" that introduced the regression and did not
provide a helpful explanation.
In order to leave the GPIO LED code still present in normal
builds, this also enables the symbol in u8500_defconfig, in addition
to the other LED drivers that are already selected there.
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Lee Jones <[email protected]>
|
|
The head-v7.S contains a call to the generic cpu_suspend function,
which is only available when selected by the i.MX6 code. As
pointed out by Shawn Guo, i.MX5 does not actually use any
functions defined in head-v7.S. It is also needed only for
the i.MX6 power management code and for the SMP code, so
we can restrict building this file to situations in which
at least one of those two is present.
Finally, other platforms with a similar file call it headsmp.S,
so we can rename it to the same for consistency.
Without this patch, building imx5 standalone results in:
arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume':
arch/arm/mach-imx/head-v7.S:104: undefined reference to `cpu_resume'
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Cc: Eric Miao <[email protected]>
Cc: [email protected]
|
|
The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers,
so it needs to select that code to be built. This problem has
apparently existed since the i.MX cpufreq code was first merged
in v2.6.37.
Building IMX without CPU_FREQ_TABLE results in:
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit':
arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr'
arch/arm/plat-mxc/built-in.o: In function `mxc_set_target':
arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target'
arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed':
arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify'
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init':
arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo'
arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr'
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Yong Shen <[email protected]>
Cc: [email protected]
|
|
The ksz9021rn_phy_fixup and mx6q_sabrelite functions try to
set up an ethernet phy if they can. They do check whether
phylib is enabled, but unfortunately the functions can only
be called from platform code if phylib is builtin, not
if it is a module
Without this patch, building with a modular phylib results in:
arch/arm/mach-imx/mach-imx6q.c: In function 'imx6q_sabrelite_init':
arch/arm/mach-imx/mach-imx6q.c:120:5: error: 'ksz9021rn_phy_fixup' undeclared (first use in this function)
arch/arm/mach-imx/mach-imx6q.c:120:5: note: each undeclared identifier is reported only once for each function it appears in
The bug was originally reported by Artem Bityutskiy but only
partially fixed in ef441806 "ARM: imx6q: register phy fixup only when
CONFIG_PHYLIB is enabled".
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Cc: Artem Bityutskiy <[email protected]>
Cc: Sascha Hauer <[email protected]>
|
|
This moves the imx5 pm code out of the list of unconditionally
compiled files for imx5, mirroring what we already do for imx6
and how it was done before the code was move from mach-mx5 to
mach-imx in v3.3.
Without this patch, building with CONFIG_PM disabled results in:
arch/arm/mach-imx/pm-imx5.c:202:116: error: redefinition of 'imx51_pm_init'
arch/arm/mach-imx/include/mach-imx/common.h:154:91: note: previous definition of 'imx51_pm_init' was here
arch/arm/mach-imx/pm-imx5.c:209:116: error: redefinition of 'imx53_pm_init'
arch/arm/mach-imx/include/mach-imx/common.h:155:91: note: previous definition of 'imx53_pm_init' was here
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: [email protected]
|
|
The new omap4 cpuidle implementation currently requires
ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP.
This patch makes it possible to build a non-SMP kernel
for that platform. This is not normally desired for
end-users but can be useful for testing.
Without this patch, building rand-0y2jSKT results in:
drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke':
drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration]
It's not clear if this patch is the best solution for
the problem at hand. I have made sure that we can now
build the kernel in all configurations, but that does
not mean it will actually work on an OMAP44xx.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Tested-by: Santosh Shilimkar <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Tony Lindgren <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes
From Linus Walleij <[email protected]>:
Here are two audio fixes for the ux500 found by Lee Jones.
* tag 'ux500-fixes-v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled
ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim <[email protected]>:
For HDMI, already HDMI support for EXYNOS in mainline kernel is broken
because its configuration moved to platform data but regarding platform
data didn't support yet. And others are for fix warnings.
* 'v3.6-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Set HDMI platform data in Origen board
ARM: EXYNOS: Set HDMI platform data in SMDKV310
ARM: SAMSUNG: Add API to set platform data for s5p-tv driver
ARM: SAMSUNG: Set HDMI platform data for Exynos4x12 SoCs
ARM: Samsung: Make uart_save static in pm.c file
ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters
ARM: S3C24XX: Add missing DMACH_DT_PROP
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
* 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: dts: imx51-babbage: fix esdhc cd/wp properties
ARM: imx6: spin the cpu until hardware takes it down
ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path
Also updates to Linux 3.6-rc2
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
When we are finished with return PFNs to the hypervisor, then
populate it back, and also mark the E820 MMIO and E820 gaps
as IDENTITY_FRAMEs, we then call P2M to set areas that can
be used for ballooning. We were off by one, and ended up
over-writting a P2M entry that most likely was an IDENTITY_FRAME.
For example:
1-1 mapping on 40000->40200
1-1 mapping on bc558->bc5ac
1-1 mapping on bc5b4->bc8c5
1-1 mapping on bc8c6->bcb7c
1-1 mapping on bcd00->100000
Released 614 pages of unused memory
Set 277889 page(s) to 1-1 mapping
Populating 40200-40466 pfn range: 614 pages added
=> here we set from 40466 up to bc559 P2M tree to be
INVALID_P2M_ENTRY. We should have done it up to bc558.
The end result is that if anybody is trying to construct
a PTE for PFN bc558 they end up with ~PAGE_PRESENT.
CC: [email protected]
Reported-by-and-Tested-by: Andre Przywara <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
|
|
If the controller has no PCIe module attached, accessing of the device
configuration space causes a data bus error. Avoid this by checking the
status of the PCIe link in advance, and indicate an error if the link
is down.
Signed-off-by: Gabor Juhos <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/4293/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
The binding doc and dts use properties "fsl,{cd,wp}-internal" while
esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts
to get them match driver code.
Reported-by: Chris Ball <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Cc: <[email protected]>
Acked-by: Chris Ball <[email protected]>
|
|
Though commit 602bf40 (ARM: imx6: exit coherency when shutting down
a cpu) improves the stability of imx6q cpu hotplug a lot, there are
still hangs seen with a more stressful hotplug testing.
It's expected that once imx_enable_cpu(cpu, false) is called, the cpu
will be taken down by hardware immediately, and the code after that
will not get any chance to execute. However, this is not always the
case from the testing. The cpu could possibly be alive for a few
cycles before hardware actually takes it down. So rather than letting
cpu execute some code that could cause a hang in these cycles, let's
make the cpu spin there and wait for hardware to take it down.
Cc: <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
This issue was recently observed on an AMD C-50 CPU where a patch of
maximum size was applied.
Commit be62adb49294 ("x86, microcode, AMD: Simplify ucode verification")
added current_size in get_matching_microcode(). This is calculated as
size of the ucode patch + 8 (ie. size of the header). Later this is
compared against the maximum possible ucode patch size for a CPU family.
And of course this fails if the patch has already maximum size.
Cc: <[email protected]> [3.3+]
Signed-off-by: Andreas Herrmann <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: H. Peter Anvin <[email protected]>
|
|
The sub-register used to access the stack (sp, esp, or rsp) is not
determined by the address size attribute like other memory references,
but by the stack segment's B bit (if not in x86_64 mode).
Fix by using the existing stack_mask() to figure out the correct mask.
This long-existing bug was exposed by a combination of a27685c33acccce
(emulate invalid guest state by default), which causes many more
instructions to be emulated, and a seabios change (possibly a bug) which
causes the high 16 bits of esp to become polluted across calls to real
mode software interrupts.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Although the possible race described in
commit 85b7059169e128c57a3a8a3e588fb89cb2031da1
KVM: MMU: fix shrinking page from the empty mmu
was correct, the real cause of that issue was a more trivial bug of
mmu_shrink() introduced by
commit 1952639665e92481c34c34c3e2a71bf3e66ba362
KVM: MMU: do not iterate over all VMs in mmu_shrink()
Here is the bug:
if (kvm->arch.n_used_mmu_pages > 0) {
if (!nr_to_scan--)
break;
continue;
}
We skip VMs whose n_used_mmu_pages is not zero and try to shrink others:
in other words we try to shrink empty ones by mistake.
This patch reverses the logic so that mmu_shrink() can free pages from
the first VM whose n_used_mmu_pages is not zero. Note that we also add
comments explaining the role of nr_to_scan which is not practically
important now, hoping this will be improved in the future.
Signed-off-by: Takuya Yoshikawa <[email protected]>
Cc: Gleb Natapov <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
|
|
Probably a leftover from the early days of self-patching, p6nops
are marked __initconst_or_module, which causes them to be
discarded in a non-modular kernel. If something later triggers
patching, it will overwrite kernel code with garbage.
Reported-by: Tomas Racek <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
Cc: Michael Tokarev <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: [email protected]
Cc: Anthony Liguori <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Alan Cox <[email protected]>
Cc: Alan Cox <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
When one CPU is going down and this CPU is the last one in irq
affinity, current code is setting cpu_all_mask as the new
affinity for that irq.
But for some systems (such as in Medfield Android mobile) the
firmware sends the interrupt to each CPU in the irq affinity
mask, averaged, and cpu_all_mask includes all potential CPUs,
i.e. offline ones as well.
So replace cpu_all_mask with cpu_online_mask.
Signed-off-by: liu chuansheng <[email protected]>
Acked-by: Yanmin Zhang <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A137286@SHSMSX101.ccr.corp.intel.com
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This comment is no longer true. We support up to 2^16 CPUs
because __ticket_t is an u16 if NR_CPUS is larger than 256.
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Each page mapped in a process's address space must be correctly
accounted for in _mapcount. Normally the rules for this are
straightforward but hugetlbfs page table sharing is different. The page
table pages at the PMD level are reference counted while the mapcount
remains the same.
If this accounting is wrong, it causes bugs like this one reported by
Larry Woodman:
kernel BUG at mm/filemap.c:135!
invalid opcode: 0000 [#1] SMP
CPU 22
Modules linked in: bridge stp llc sunrpc binfmt_misc dcdbas microcode pcspkr acpi_pad acpi]
Pid: 18001, comm: mpitest Tainted: G W 3.3.0+ #4 Dell Inc. PowerEdge R620/07NDJ2
RIP: 0010:[<ffffffff8112cfed>] [<ffffffff8112cfed>] __delete_from_page_cache+0x15d/0x170
Process mpitest (pid: 18001, threadinfo ffff880428972000, task ffff880428b5cc20)
Call Trace:
delete_from_page_cache+0x40/0x80
truncate_hugepages+0x115/0x1f0
hugetlbfs_evict_inode+0x18/0x30
evict+0x9f/0x1b0
iput_final+0xe3/0x1e0
iput+0x3e/0x50
d_kill+0xf8/0x110
dput+0xe2/0x1b0
__fput+0x162/0x240
During fork(), copy_hugetlb_page_range() detects if huge_pte_alloc()
shared page tables with the check dst_pte == src_pte. The logic is if
the PMD page is the same, they must be shared. This assumes that the
sharing is between the parent and child. However, if the sharing is
with a different process entirely then this check fails as in this
diagram:
parent
|
------------>pmd
src_pte----------> data page
^
other--------->pmd--------------------|
^
child-----------|
dst_pte
For this situation to occur, it must be possible for Parent and Other to
have faulted and failed to share page tables with each other. This is
possible due to the following style of race.
PROC A PROC B
copy_hugetlb_page_range copy_hugetlb_page_range
src_pte == huge_pte_offset src_pte == huge_pte_offset
!src_pte so no sharing !src_pte so no sharing
(time passes)
hugetlb_fault hugetlb_fault
huge_pte_alloc huge_pte_alloc
huge_pmd_share huge_pmd_share
LOCK(i_mmap_mutex)
find nothing, no sharing
UNLOCK(i_mmap_mutex)
LOCK(i_mmap_mutex)
find nothing, no sharing
UNLOCK(i_mmap_mutex)
pmd_alloc pmd_alloc
LOCK(instantiation_mutex)
fault
UNLOCK(instantiation_mutex)
LOCK(instantiation_mutex)
fault
UNLOCK(instantiation_mutex)
These two processes are not poing to the same data page but are not
sharing page tables because the opportunity was missed. When either
process later forks, the src_pte == dst pte is potentially insufficient.
As the check falls through, the wrong PTE information is copied in
(harmless but wrong) and the mapcount is bumped for a page mapped by a
shared page table leading to the BUG_ON.
This patch addresses the issue by moving pmd_alloc into huge_pmd_share
which guarantees that the shared pud is populated in the same critical
section as pmd. This also means that huge_pte_offset test in
huge_pmd_share is serialized correctly now which in turn means that the
success of the sharing will be higher as the racing tasks see the pud
and pmd populated together.
Race identified and changelog written mostly by Mel Gorman.
{[email protected]: attempt to make the huge_pmd_share() comment comprehensible, clean up coding style]
Reported-by: Larry Woodman <[email protected]>
Tested-by: Larry Woodman <[email protected]>
Reviewed-by: Mel Gorman <[email protected]>
Signed-off-by: Michal Hocko <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: David Gibson <[email protected]>
Cc: Ken Chen <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu arch fixes from Greg Ungerer:
"This contains 2 fixes. One fixes compilation of ColdFire clk code,
the other makes sure we use the generic atomic64 support on all m68k
targets."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: select CONFIG_GENERIC_ATOMIC64 for all m68k CPU types
m68knommu: select CONFIG_HAVE_CLK for ColdFire CPU types
|
|
On s390x-linux-gcc, __SIZE_TYPE__ expands to "long unsigned int" for both
32-bit s390 and 64-bit s390x, as
gcc-4.6.3-nolibc/s390x-linux/lib/gcc/s390x-linux/4.6.3/plugin/include/config/s390/linux.h
has
#define SIZE_TYPE (TARGET_64BIT ? "long unsigned int" : "long unsigned int")
To match this, __kernel_size_t is always set to "long unsigned int".
But while __kernel_ssize_t is "long" on 64-bit s390x, it is "int" on 32-bit
s390, causing compiler warnings like:
fs/quota/quota_tree.c:372:4: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'ssize_t' [-Wformat]
To fix this, __kernel_ssize_t should be "long", irrespective of word size.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull config cleanup for ia64 from Tony Luck:
"Clean out references to dead CONFIG_MISC_DEVICES option"
* tag 'please-pull-ia64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
[IA64] defconfig: Remove CONFIG_MISC_DEVICES
|
|
commit 7c5763b845 (drivers:misc: Remove MISC_DEVICES config option) removed
CONFIG_MISC_DEVICES option, so remove the occurrences from the config files
as well.
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar.
A x32 socket ABI fix with a -stable backport tag among other fixes.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x32: Use compat shims for {g,s}etsockopt
Revert "x86-64/efi: Use EFI to deal with platform wall clock"
x86, apic: fix broken legacy interrupts in the logical apic mode
x86, build: Globally set -fno-pic
x86, avx: don't use avx instructions with "noxsave" boot param
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: disable PEBS on a guest entry.
perf/x86: Add Intel Westmere-EX uncore support
perf/x86: Fixes for Nehalem-EX uncore driver
perf, x86: Fix uncore_types_exit section mismatch
|
|
Merge alpha architecture update from Michael Cree:
"The Alpha Maintainer, Matt Turner, is currently unavailable, so I have
collected up patches that have been posted to the linux-alpha mailing
list over the last couple of months, and are forwarding them to you in
the hope that you are prepared to accept them via me.
The patches by Al Viro and myself I have been running against kernels
for two months now so have had quite a bit of testing. All except one
patch were intended for the 3.5 kernel but because of Matt's
unavailability never got forwarded to you."
* emailed patches from Michael Cree <[email protected]>: (9 commits)
alpha: Fix fall-out from disintegrating asm/system.h
Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
alpha: fix fpu.h usage in userspace
alpha/mm/fault.c: Port OOM changes to do_page_fault
alpha: take kernel_execve() out of entry.S
alpha: take a bunch of syscalls into osf_sys.c
alpha: Use new generic strncpy_from_user() and strnlen_user()
alpha: Wire up cross memory attach syscalls
alpha: Don't export SOCK_NONBLOCK to user space.
|
|
Commit ec2212088c42 ("Disintegrate asm/system.h for Alpha") removed
asm/system.h however arch/alpha/oprofile/common.c requires definitions
that were shifted from asm/system.h to asm/special_insns.h. Include
that.
Signed-off-by: Michael Cree <[email protected]>
Acked-by: Matt Turner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The following build error occurred during an alpha build:
net/core/sock.c:274:36: error: initializer element is not constant
Dave Anglin says:
> Here is the line in sock.i:
>
> struct static_key memalloc_socks = ((struct static_key) { .enabled =
> ((atomic_t) { (0) }) });
The above line contains two compound literals. It also uses a designated
initializer to initialize the field enabled. A compound literal is not a
constant expression.
The location of the above statement isn't fully clear, but if a compound
literal occurs outside the body of a function, the initializer list must
consist of constant expressions.
Cc: <[email protected]>
Signed-off-by: Mel Gorman <[email protected]>
Signed-off-by: Fengguang Wu <[email protected]>
Signed-off-by: Michael Cree <[email protected]>
Acked-by: Matt Turner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
After commit ec2212088c42 ("Disintegrate asm/system.h for Alpha"), the
fpu.h header which we install for userland started depending on
special_insns.h which is not installed.
However, fpu.h only uses that for __KERNEL__ code, so protect the
inclusion the same way to avoid build breakage in glibc:
/usr/include/asm/fpu.h:4:31: fatal error: asm/special_insns.h: No such file or directory
Cc: [email protected]
Reported-by: Matt Turner <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
Signed-off-by: Michael Cree <[email protected]>
Acked-by: Matt Turner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit d065bd810b6d ("mm: retry page fault when blocking on disk
transfer") and 37b23e0525d3 ("x86,mm: make pagefault killable")
introduced changes into the x86 pagefault handler for making the page
fault handler retryable as well as killable.
These changes reduce the mmap_sem hold time, which is crucial during OOM
killer invocation.
Port these changes to ALPHA.
Signed-off-by: Mohd. Faris <[email protected]>
Signed-off-by: Kautuk Consul <[email protected]>
Acked-by: Matt Turner <[email protected]>
Signed-off-by: Michael Cree <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Michael Cree <[email protected]>
Acked-by: Matt Turner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
New helper: current_thread_info(). Allows to do a bunch of odd syscalls
in C. While we are at it, there had never been a reason to do
osf_getpriority() in assembler. We also get "namespace"-aware (read:
consistent with getuid(2), etc.) behaviour from getx?id() syscalls now.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Michael Cree <[email protected]>
Acked-by: Matt Turner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Similar to x86/sparc/powerpc implementations except:
1) we implement an extremely efficient has_zero()/find_zero()
sequence with both prep_zero_mask() and create_zero_mask()
no-operations.
2) Our output from prep_zero_mask() differs in that only the
lowest eight bits are used to represent the zero bytes
nevertheless it can be safely ORed with other similar masks
from prep_zero_mask() and forms input to create_zero_mask(),
the two fundamental properties prep_zero_mask() must satisfy.
Tests on EV67 and EV68 CPUs revealed that the generic code is
essentially as fast (to within 0.5% of CPU cycles) of the old
Alpha specific code for large quadword-aligned strings, despite
the 30% extra CPU instructions executed. In contrast, the
generic code for unaligned strings is substantially slower (by
more than a factor of 3) than the old Alpha specific code.
Signed-off-by: Michael Cree <[email protected]>
Acked-by: Matt Turner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add sys_process_vm_readv and sys_process_vm_writev to Alpha.
Signed-off-by: Michael Cree <[email protected]>
Acked-by: Matt Turner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently we export SOCK_NONBLOCK to user space but that conflicts with
the definition from glibc leading to compilation errors in user programs
(e.g. see Debian bug #658460).
The generic socket.h restricts the definition of SOCK_NONBLOCK to the
kernel, as does the MIPS specific socket.h, so let's do the same on
Alpha.
Signed-off-by: Michael Cree <[email protected]>
Acked-by: Matt Turner <[email protected]>
Cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull ARM fixes from Russell King:
"The largest thing in this set of changes is bringing back some of the
ARMv3 code to fix a compile problem noticed on RiscPC, which we still
support, even though we only support ARMv4 there.
(The reason is that the system bus doesn't support ARMv4 half-word
accesses, so we need the ARMv3 library code for this platform.)
The rest are all quite minor fixes."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBE
ARM: Bring back ARMv3 IO and user access code
ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems
ARM: 7488/1: mm: use 5 bits for swapfile type encoding
ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present
ARM: 7486/1: sched_clock: update epoch_cyc on resume
ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocks
ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled
ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology
|
|
Some of the arguments to {g,s}etsockopt are passed in userland pointers.
If we try to use the 64bit entry point, we end up sometimes failing.
For example, dhcpcd doesn't run in x32:
# dhcpcd eth0
dhcpcd[1979]: version 5.5.6 starting
dhcpcd[1979]: eth0: broadcasting for a lease
dhcpcd[1979]: eth0: open_socket: Invalid argument
dhcpcd[1979]: eth0: send_raw_packet: Bad file descriptor
The code in particular is getting back EINVAL when doing:
struct sock_fprog pf;
setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER, &pf, sizeof(pf));
Diving into the kernel code, we can see:
include/linux/filter.h:
struct sock_fprog {
unsigned short len;
struct sock_filter __user *filter;
};
net/core/sock.c:
case SO_ATTACH_FILTER:
ret = -EINVAL;
if (optlen == sizeof(struct sock_fprog)) {
struct sock_fprog fprog;
ret = -EFAULT;
if (copy_from_user(&fprog, optval, sizeof(fprog)))
break;
ret = sk_attach_filter(&fprog, sk);
}
break;
arch/x86/syscalls/syscall_64.tbl:
54 common setsockopt sys_setsockopt
55 common getsockopt sys_getsockopt
So for x64, sizeof(sock_fprog) is 16 bytes. For x86/x32, it's 8 bytes.
This comes down to the pointer being 32bit for x32, which means we need
to do structure size translation. But since x32 comes in directly to
sys_setsockopt, it doesn't get translated like x86.
After changing the syscall table and rebuilding glibc with the new kernel
headers, dhcp runs fine in an x32 userland.
Oddly, it seems like Linus noted the same thing during the initial port,
but I guess that was missed/lost along the way:
https://lkml.org/lkml/2011/8/26/452
[ hpa: tagging for -stable since this is an ABI fix. ]
Bugzilla: https://bugs.gentoo.org/423649
Reported-by: Mads <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Cc: H. J. Lu <[email protected]>
Cc: <[email protected]> v3.4..v3.5
Signed-off-by: H. Peter Anvin <[email protected]>
|
|
Pull C6X atomic64 support from Mark Salter:
"Enable atomic64 ops in C6X
- define L1_CACHE_SHIFT
- select GENERIC_ATOMIC64"
* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
C6X: select GENERIC_ATOMIC64
C6X: add Lx_CACHE_SHIFT defines
|
|
If P2M leaf is completly packed with INVALID_P2M_ENTRY or with
1:1 PFNs (so IDENTITY_FRAME type PFNs), we can swap the P2M leaf
with either a p2m_missing or p2m_identity respectively. The old
page (which was created via extend_brk or was grafted on from the
mfn_list) can be re-used for setting new PFNs.
This also means we can remove git commit:
5bc6f9888db5739abfa0cae279b4b442e4db8049
xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back
which tried to fix this.
and make the amount that is required to be reserved much smaller.
CC: [email protected] # for 3.5 only.
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
|
|
Previous attempts to add platform probing of the Audio related devices
only call from non-DT initialisation functions. This patch extends that
functionality to the Device Tree related ones too.
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
The platform attempts to register platform device 'snd_soc_u8500'
which doesn't actually exist. Here we change the reference to the
correct one 'snd_soc_mop500'.
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
2ec8663f9c03a96f2c328c7c483603c31d62ad37 (lmo) rsp.
497e5ff03f58583ada469db8a1aa34eced9dd63e (kernel.org) [MIPS: Malta: Move
PIIX4 PCI fixup to where it belongs.] attempted to move this PCI fixup
but really only added it at it's new location without deleting the old
instance.
Signed-off-by: Ralf Baechle <[email protected]>
|
|
The ath79 platform code allows to run a single kernel image on various
SoCs which are based on the 24Kc and 74Kc cores. The current code
explicitely disables the DSP ASE, but that is available in the 74Kc core.
Remove the override in order to let the kernel to detect the availability
of the DSP ASE at runtime.
Signed-off-by: Gabor Juhos <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/4222/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
The current implementation of synchronise_count_{master,slave} blocks
slave CPUs in early boot until all of them come up. This no longer
works because blocking a CPU with interrupts off after notifying the
CPU to be online causes problems with the current kernel.
Specifically, after the workqueue changes
(commit a08489c569dc1 "Pull workqueue changes from Tejun Heo")
the CPU_ONLINE notification callback workqueue_cpu_up_callback()
will hang on wait_for_completion(&idle_rebind.done), if the slave
CPUs are blocked for synchronize_count_slave().
The changes are to update synchronize_count_{master,slave}() to handle
one CPU at a time and to call synchronise_count_master() in __cpu_up()
so that the CPU_ONLINE notification goes out only after the COP0 COUNT
register is synchronized.
[[email protected]: This matter only to those few platforms which are
using the cp0 counter as their clocksource which are XLP, XLR and MIPS'
CMP solution.]
Signed-off-by: Jayachandran C <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/4216/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
BCM6338 and BCM6348 have a message control register width of 8 bits, instead
of 16-bits like what the SPI driver assumes right now. Also the SPI message
type shift value of 14 is actually 6 for these SoCs.
This resulted in transmit FIFO corruption because we were writing 16-bits
to an 8-bits wide register, thus spanning on the first byte of the transmit
FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo().
Fix this by passing the message control register width and message type
shift through platform data back to the SPI driver so that it can use
it properly.
Signed-off-by: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/3983/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
In case a series of R_MIPS_HI16 relocations was not followed by an
R_MIPS_LO16 relocation we were leaking the hi16 relocation chain.
Handle that error and return an error.
Signed-off-by: Ralf Baechle <[email protected]>
|