aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2023-12-16arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibrationDavid Heidelberg7-234/+238
fsl,tmu-calibration contains cell pairs (u32-matrix). Mark them as such. Use matching property syntax and allow correct validation. No functional changes. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-16arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by defaultAlexander Stein2-0/+5
Even if the 'dsp' node is disabled the memory intended to be used by the DSP is reserved. This limits the memory range suitable for CMA allocation. Thus disable the dsp_reserved node. DSP users need to enable it in parallel to the 'dsp' node. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-16arm64: dts: imx8qxp: Add VPU subsystem fileAlexander Stein2-1/+18
imx8qxp re-uses imx8qm VPU subsystem file, but it has different base addresses. Also imx8qxp has only two VPU cores, delete vpu_vore2 and mu2_m0 accordingly. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-16arm64: dts: imx8qxp-mek: Move port under USB connectorFabio Estevam1-6/+9
Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'. Do as requested to fix the following dt-schema warning: imx8qxp-mek.dtb: tcpc@50: connector:ports: 'port@0' is a required property from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# imx8qxp-mek.dtb: tcpc@50: connector: Unevaluated properties are not allowed ('ports' was unexpected) from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-16arm64: dts: imx8mn-bsh-smm-s2/pro: add display setupMichael Trimarchi2-0/+122
Add the display and nodes required for its operation. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connectorFabio Estevam1-4/+8
Describe the PTN5150 USB-C connector to improve the devicetree description and fix the following dt-schema warning: imx8mp-dhcom-pdk3.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connectorFabio Estevam1-3/+8
Describe the PTN5150 USB-C connector to improve the devicetree description and fix the following dt-schema warning: imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector descriptionFabio Estevam1-7/+19
The USB connector should not be placed under the dwc3 node. Move the USB connector out of the SoC level and use port to describe the connection to the dwc3 controller. This fixes the following dt-schema warning: imx8mp-tqma8mpql-mba8mpxl.dtb: usb@38100000: Unevaluated properties are not allowed ('connector' was unexpected) from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mp-venice: Fix USB connector descriptionFabio Estevam4-28/+76
The USB connector should not be placed under the dwc3 node. Move the USB connector out of the SoC level and use port to describe the connection to the dwc3 controller. This fixes the following dt-schema warning: imx8mp-venice-gw72xx-2x.dtb: usb@38100000: Unevaluated properties are not allowed ('connector' was unexpected) from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mp-verdin: Fix USB connector descriptionFabio Estevam1-9/+21
The USB connector should not be placed under the dwc3 node. Move the USB connector out of the SoC level and use port to describe the connection to the dwc3 controller. This fixes the following dt-schema warning: imx8mp-verdin-wifi-mallow.dtb: usb@32f10100: usb@38100000: Unevaluated properties are not allowed ('connector' was unexpected) from schema $id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB nodeFabio Estevam1-7/+7
The clk_dummy is not part of the usbotg2 block, so move it to the root node to fix the following dt-schema warning: imx8dxl-evk.dtb: usb@5b0e0000: Unevaluated properties are not allowed ('clock-dummy' was unexpected) from schema $id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mn-evk: Move port under USB connectorFabio Estevam1-6/+6
Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'. Do as requested to fix the following dt-schema warning: imx8mn-evk.dtb: tcpc@50: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mm-evk: Move port under USB connectorFabio Estevam1-6/+6
Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'. Do as requested to fix the following dt-schema warning: imx8mm-evkb.dtb: tcpc@50: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: freescale: introduce dimonoff-gateway-evk boardHugo Villeneuve2-0/+161
The Dimonoff gateway EVK board is based on a Variscite VAR-SOM-NANO, with a NXP MX8MN nano CPU and also based on a Symphony mx8mn EVK. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8m*-tqma8m*: Add chassis-typeAlexander Stein4-0/+4
Device tree specification 0.4 defines an optional, but recommended 'chassis-type' property. Add it to TQMa8M* based board files. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mn-beacon: Support overdrive modeAdam Ford1-0/+2
The SoC is configured to operate in overdrive mode, so it is safe to include imx8mn-overdrive to run the GPU faster. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mn: Enable Overdrive modeAdam Ford1-0/+18
The i.MX8M Nano supports and overdrive mode if the SoC is given the proper voltage. Add imx8mn-overdrive.dtsi file which can be included by boards who support the voltage necessary to handle the faster clocks. This increases the GPU clocks from 400MHz to 600MHz. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mm-beacon: Enable overdrive modeAdam Ford1-0/+2
The SoC runs at a high enough voltage to support overdrive mode, so include the imx8mm-overdrive.dtsi file to increase the VPU and GPU clocks to their overdrive speeds. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mm: Add optional overdrive DTSIAdam Ford1-0/+29
For boards who run their SoC at a higher voltage than nominal, the boards can run several clocks at an overdrive rate for better performance. Add an optional DTSI file which can be included by various boards to run in overdrive mode. This raises the GPU PLL to 1000MHz, and the VPU PLL to 700MHz while moving VPU_G1 and VPU_H1 to the SYS_PLL3_OUT which runs at 750MHz. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mm: Reduce GPU to nominal speedAdam Ford1-2/+2
When the GPU nodes were added, the GPU_PLL_OUT was configured for 1000MHz, but this requires the SoC to run in overdrive mode which requires an elevated voltage operating point. Since this may run some boards out of spec, the default clock should be set to 800MHz for nominal operating mode. Boards that run at the higher voltage can update their clocks accordingly. Fixes: 4523be8e46be ("arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx93: Fix the micfil clock-names entriesFabio Estevam1-4/+2
fsl,micfil.yaml defines the clock-names in the following sequence: clock-names: items: - const: ipg_clk - const: ipg_clk_app - const: pll8k - const: pll11k - const: clkext3 minItems: 2 imx93.dtsi currently misses the 'pll11k' entry and jump to 'clkext3'. This leads to the following dt-schema warning: imx93-11x11-evk.dtb: micfil@44520000: clock-names:3: 'pll11k' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,micfil.yaml# Fix the warning by describing the clocks up to 'pll8k' as 'clkext3' is assigned to a dummy clock. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: freescale: add fsl-lx2160a-mblx2160a boardGregor Herburger8-0/+658
Add the different serdes configurations as overlays. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: freescale: imx93: add i3c1 and i3c2Frank Li1-0/+26
Add I3C1 and I3C2. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: ls1012a: Remove big-endian from thermalFabio Estevam1-1/+0
Per qoriq-thermal.yaml, 'big-endian' is not a valid property. When the 'little-endian' property is absent, the default is big endian. Remove it to fix the following schema warning: tmu@1f00000: 'big-endian' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mq-phanbell: make dts use gpio-fan matrix instead of arrayDavid Heidelberg1-1/+1
No functional changes. Adjust to comply with dt-schema requirements and make possible to validate values. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: verdin-imx8mp: add support to mallow boardJoao Paulo Goncalves4-0/+237
Add Toradex Verdin IMX8MP Mallow carrier board support. Mallow is a low-cost carrier board in the Verdin family with a small form factor and build for volume production making it ideal for industrial and embedded applications. https://www.toradex.com/products/carrier-board/mallow-carrier-board Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: verdin-imx8mm: add support to mallow boardJoao Paulo Goncalves4-0/+211
Add Toradex Verdin IMX8MM Mallow carrier board support. Mallow is a low-cost carrier board in the Verdin family with a small form factor and build for volume production making it ideal for industrial and embedded applications. https://www.toradex.com/products/carrier-board/mallow-carrier-board Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-venice-gw7: Adjust PCI Ethernet nodesFabio Estevam3-6/+3
As per Rob Herring's feedback: "The ethernet device should have a node name of 'ethernet'. The 'pcie' node name and 'device_type = "pci"' is for PCI buses/bridges only." Do it as suggested. Fixes: d61c5068729a ("arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodes") Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm: Slow default video_pll1 clock rateAdam Ford1-1/+1
Since commit 8208181fe536 ("clk: imx: composite-8m: Add imx8m_divider_determine_rate") the lcdif controller has had the ability to set the lcdif_pixel rate which propagates up the tree and sets the video_pll1 rate automatically. By setting this value low, it will force the recalculation of video_pll1 to the lowest rate needed by lcdif instead of dividing a larger clock down to the desired clock speed. This has the advantage of being able to lower the video_pll1 rate from 594MHz to 148.5MHz when operating at 1080p. It can go even lower when operating at lower resolutions and refresh rates. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm: Remove video_pll1 clock rate from clk nodeAdam Ford1-2/+0
There are two clock-rate assignments for video_pll1, and the only one it should really have belongs inside the lcdif node, since it's the only consumer of this clock. Remove it from the clk node. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm: Simplify mipi_dsi clocksAdam Ford1-6/+2
The device tree clock structure for the mipi_dsi is unnecessarily redundant. The default clock parent of IMX8MM_CLK_DSI_PHY_REF is already IMX8MM_CLK_24M, so there is no need to set the parent-child relationship between them. The default clock rates for IMX8MM_SYS_PLL1_266M and IMX8MM_CLK_24M are already defined to be 266MHz and 24MHz respectively, so there is no need to define those clock rates. On i.MX8M[MNP] the samsung,pll-clock-frequency is not necessary, because the driver will read it from sclk_mipi which is also already set to 24MHz making it also redundant. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: minor whitespace cleanup around '='Krzysztof Kozlowski3-5/+5
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8dxl-ss-ddr: change ddr_pmu0 compatibleXu Yang1-1/+1
i.MX8DXL's ddr pmu has port/channel filter capabilities, but it still is compatible with "fsl,imx8-ddr-pmu". This will change the compatible. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: tqma8mpql: Remove invalid/unused propertyAlexander Stein1-1/+0
'dr_mode' is part of the USB DWC3 core, not the glue layer. Remove the property from glue layer. Fixes the dtbs_check warning: arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dtb: usb@32f10108: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8-ss-audio: Remove unexistent'shared-interrupt'Fabio Estevam1-2/+0
The 'shared-interrupt' property is not documented nor used anywhere. Remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx93: Remove unexistent 'shared-interrupt'Fabio Estevam1-1/+0
The 'shared-interrupt' property is not documented nor used anywhere. Remove it. This fixes the following schema warning: imx93-11x11-evk.dtb: dma-controller@42000000: Unevaluated properties are not allowed ('shared-interrupt' was unexpected) from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8qxp-mek: Fix gpio-sbu-mux compatibleFabio Estevam1-1/+1
Per gpio-sbu-mux.yaml, the compatible entry is incomplete. The imx8qxp-mek board uses a CBDTU02043, so complete the gpio-sbu-mux compatible accordingly. This fixes the following schema warning: imx8qxp-mek.dtb: gpio-sbu-mux: compatible:0: 'gpio-sbu-mux' is not one of ['onnn,fsusb43l10x', 'pericom,pi3usb102'] from schema $id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mp-debix-model-a: Use phy-modeFabio Estevam1-1/+1
The property 'phy-connection-type' can be used to describe the interface type between the Ethernet device and the Ethernet PHY device. However, snps,dwmac.yaml gives the following warning: imx8mp-debix-model-a.dtb: ethernet@30bf0000: 'phy-mode' is a required property from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# To avoid the warning, switch to the more commonly used, 'phy-mode' property instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-nitrogen-r2: Fix I2C mux subnode nameFabio Estevam1-1/+1
Per i2c-mux-pca954x.yaml, the I2C subnodes should follow the 'i2c@' format. Change it to fix the following schema warning: imx8mm-nitrogen-r2.dtb: i2c-mux@70: Unevaluated properties are not allowed ('i2c3@0' was unexpected) from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8dxl-ss-conn: Fix Ethernet interrupt-names orderFabio Estevam1-1/+1
Per snps,dwmac.yaml, the interrupt-names entries should be in the following order: "macirq", "eth_wake_irq"; Change it to fix the following schema warnings. imx8dxl-evk.dtb: ethernet@5b050000: interrupt-names:0: 'macirq' was expected from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# imx8dxl-evk.dtb: ethernet@5b050000: interrupt-names:1: 'macirq' is not one of ['eth_wake_irq', 'eth_lpi'] from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-emcon-avari: Fix gpio-cellsFabio Estevam1-1/+1
Per nxp,pcf8575.yaml, #gpio-cells should be 2. Change it to fix the following schema warning: imx8mm-emcon-avari.dtb: gpio@3a: #gpio-cells:0:0: 2 was expected from schema $id: http://devicetree.org/schemas/gpio/nxp,pcf8575.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8qm-ss-dma: Pass lpuart dma-namesFabio Estevam1-0/+4
Per fsl-lpuart.yaml, when the 'dmas' property is used 'dma-names' should also be present. Pass the lpuart 'dma-names' property to fix the following schema warnings: imx8dxl-evk.dtb: serial@5a060000: dma-names:0: 'rx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# imx8dxl-evk.dtb: serial@5a060000: dma-names:1: 'tx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# imx8dxl-evk.dtb: serial@5a060000: Unevaluated properties are not allowed ('dma-names' was unexpected) from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: Add SKOV IMX8MP CPU revB boardOleksij Rempel5-0/+935
Add Skov i.MX8MP based climate controller. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mn-var-som-symphony: add vcc supply for PCA9534Hugo Villeneuve1-0/+10
The following warning is shown when probing device: pca953x 1-0020: supply vcc not found, using dummy regulator Define a new fixed 3.3v regulator for carrier board peripherals, enabled by mosfet switch Q2 after the SOM_3V3 supply rises (no software control). Add this new regulator as vcc supply to the PCA9534 to silence the warning. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: introduce rve-gateway boardHugo Villeneuve2-0/+286
The RVE gateway board is based on a Variscite VAR-SOM-NANO, with a NXP MX8MN nano CPU. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: debix-som-a-bmb-08: Add CSI Power RegulatorsKieran Bingham1-0/+56
Provide the 1.8 and 3.3 volt regulators that are utilised on the Debix SOM BMB-08 base board. Facilitate this by also supplying the pin control used to enable the regulators on the second MIPI CSI port. Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8-apalis: add can power-up delay on ixora boardAndrejs Cainikovs1-0/+2
Newer variants of Ixora boards require a power-up delay when powering up the CAN transceiver of up to 1ms. Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mn-var-som: add fixed 3.3V regulator for EEPROMHugo Villeneuve1-0/+9
When the EEPROM is probed, we have this warning: at24 0-0052: supply vcc not found, using dummy regulator Add fixed 3.3v regulator to silence the warning. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodesFabio Estevam3-27/+47
Several schema warnings are seen when running: make dtbs_check DT_SCHEMA_FILES=pci-bus.yaml Fix them. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mp: Disable dsp reserved memory by defaultAlexander Stein1-0/+1
Even if the 'dsp' node is disabled the memory intended to be used by the DSP is reserved. This limits the memory range suitable for CMA allocation. Thus disable the dsp_reserved node. DSP users need to enable it in parallel to the 'dsp' node. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.