aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2018-06-12kvm: fix typo in flag nameMichael S. Tsirkin1-2/+2
KVM_X86_DISABLE_EXITS_HTL really refers to exit on halt. Obviously a typo: should be named KVM_X86_DISABLE_EXITS_HLT. Fixes: caa057a2cad ("KVM: X86: Provide a capability to disable HLT intercepts") Cc: [email protected] Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2018-06-12kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor accessPaolo Bonzini3-14/+26
The functions that were used in the emulation of fxrstor, fxsave, sgdt and sidt were originally meant for task switching, and as such they did not check privilege levels. This is very bad when the same functions are used in the emulation of unprivileged instructions. This is CVE-2018-10853. The obvious fix is to add a new argument to ops->read_std and ops->write_std, which decides whether the access is a "system" access or should use the processor's CPL. Fixes: 129a72a0d3c8 ("KVM: x86: Introduce segmented_write_std", 2017-01-12) Signed-off-by: Paolo Bonzini <[email protected]>
2018-06-12KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_systemPaolo Bonzini3-28/+38
Int the next patch the emulator's .read_std and .write_std callbacks will grow another argument, which is not needed in kvm_read_guest_virt and kvm_write_guest_virt_system's callers. Since we have to make separate functions, let's give the currently existing names a nicer interface, too. Fixes: 129a72a0d3c8 ("KVM: x86: Introduce segmented_write_std", 2017-01-12) Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2018-06-12KVM: x86: introduce linear_{read,write}_systemPaolo Bonzini1-32/+32
Wrap the common invocation of ctxt->ops->read_std and ctxt->ops->write_std, so as to have a smaller patch when the functions grow another argument. Fixes: 129a72a0d3c8 ("KVM: x86: Introduce segmented_write_std", 2017-01-12) Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2018-06-12kvm: nVMX: Enforce cpl=0 for VMX instructionsFelix Wilhelm1-2/+13
VMX instructions executed inside a L1 VM will always trigger a VM exit even when executed with cpl 3. This means we must perform the privilege check in software. Fixes: 70f3aac964ae("kvm: nVMX: Remove superfluous VMX instruction fault checks") Cc: [email protected] Signed-off-by: Felix Wilhelm <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2018-06-12microblaze: Remove architecture heart beat codeMichal Simek5-91/+0
There is no reason to keep this gpio based code in architecture. Use ledtrig-heartbeat.c instead which is much more flexible then this ancient code. Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Linus Walleij <[email protected]>
2018-06-12microblaze: heartbeat: fix missing prom.h includeRob Herring1-1/+1
Since commit 96f0e6fcc9ad ("microblaze: remove redundant early_printk support") prom.h was removed and one instance in heartbeat.c remained. Include of.h as it is the actual header needed. Fixes: 96f0e6fcc9ad ("microblaze: remove redundant early_printk support") Reported-by: kbuild test robot <[email protected]> Cc: Michal Simek <[email protected]> Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2018-06-11Merge tag 'armsoc-late' of ↵Linus Torvalds52-3382/+7318
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "This is a branch with a few merge requests that either came in late, or took a while longer for us to review and merge than usual and thus cut it a bit close to the merge window. We stage them in a separate branch and if things look good, we still send them up -- and that's the case here. This is mostly DT additions for Renesas platforms, adding IP block descriptions for existing and new SoCs. There are also some driver updates for Qualcomm platforms for SMEM/QMI and GENI, which is their generalized serial protocol interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits) soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver arm64: dts: renesas: salvator-common: Add ADV7482 support ARM: dts: r8a7740: Add CEU1 ARM: dts: r8a7740: Add CEU0 arm64: dts: renesas: salvator-common: enable VIN arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node ...
2018-06-11Merge tag 'armsoc-dt' of ↵Linus Torvalds468-6097/+16653
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Olof Johansson: "As always, a large number of DT updates. Too many to enumerate them all, but at a glance: New SoCs introduced in this release: - Amlogic: + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set top boxes and other products. - Mediatek: + MT7623A, which is a flavor of the MT7623 family with other on-chip ethernet options. - Qualcomm: + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845 (Cortex-A75/A55 derivative) SoC that's one of the current high-end mobile SoCs. It's great to see mainline support for it. So far, you can't do much with it, since a lot of peripherals are not yet in the DTs but driver support for USB, GPU and other pieces are starting to trickle in. This might end up being a well-supported SoC upstream if the momentum keeps up. - Renesas: + R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly awaiting more. So far, basic drivers such as serial, gpios, PMU and ethernet are enabled. + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR GPU. Same here, basic set of drivers such as serial, gpios and ethernet enabled, and SMP support is also forthcoming. - STMicroelectronics: + STM32F469, very similar tih STM32F429 but with display support Enhancements to SoCs/platforms (DTS contents, some driver portions might not be in yet): - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces - Marvell Berlin2CD: SMP support, thermal sensors - Mediatek MT7623: Highspeed DMA, audio support - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support - Renesas: Watchdog and PMU support across many platforms - Rockchip RK3399: USB3 OTG support - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3 - STMicro STM32: Lots of peripherals added to STM32MP175C - Uniphier: Ethernet support New boards: - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version) - Allwinner A33: Nintendo NES/SuperNES Classic Edition - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune - Berlin2CD: Valve Steam Link - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1 - Broadcom: Raspberry Pi 3 B+ - Mediatek MT7623N and MT7623A: reference boards - Meson 8M2: Tronsmart MXIII Plus - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj - Qualcomm MSM8974: Sony Xperia Z1 Compact support - Qualcomm SDM845: MTP development board - Renesas: Ebisu R8A77990 board - Renesas RZ/G1C: iwg23s: iWave G235-SDB - TI am335x: Pocketbeagle support" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits) ARM: dts: aspeed: Fix hwrng register address arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog arm64: dts: sprd: Add GPIO and GPIO keys device nodes arm64: dts: sprd: fix typo in 'remote-endpoint' arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator arm64: dts: fix regulator property name for wlan pcie endpoint arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS ARM: dts: pxa3xx: fix MMC clocks ARM: pxa: dts: add pin definitions for extended GPIOs ARM: pxa: dts: add gpio-ranges to gpio controller ARM: dts: ipq8074: Enable few peripherals for hk01 board ARM: dts: ipq8074: Add pcie nodes ARM: dts: ipq8074: Add peripheral nodes ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi ARM: dts: ipq4019: Change the max opp frequency ...
2018-06-11Merge tag 'armsoc-soc' of ↵Linus Torvalds107-904/+1440
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) MAINTAINERS: add NXP linux team maillist as i.MX reviewer ARM: stm32: Don't select DMA unconditionally on STM32MP157C arm64: defconfig: Enable PCIe on msm8996 and db820c ARM: pxa3xx: enable external wakeup pins ARM: pxa: stargate2: use device properties for at24 eeprom arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 ARM: berlin: switch to SPDX license identifier arm: berlin: remove non-necessary flush_cache_all() ARM: berlin: extend BG2CD Kconfig entry OMAP: CLK: CLKSRC: Add suspend resume hooks ARM: AM43XX: Add functions to save/restore am43xx control registers ASoC: ams_delta: use GPIO lookup table ARM: OMAP1: ams-delta: add GPIO lookup tables bus: ti-sysc: Fix optional clocks array access ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore ...
2018-06-11Merge branch 'next/defconfig' into next/socOlof Johansson7-4/+70
Merging in defconfig updates. It's useful to keep them separate during development but little point in merging them upstream on their own. * next/defconfig: (40 commits) arm64: defconfig: Enable PCIe on msm8996 and db820c arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 arm64: defconfig: enable the Armada thermal driver ARM: multi_v7_defconfig: Enable RENESAS_WDT ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN arm64: defconfig: enable R8A77990 SoC ARM: multi_v7_defconfig: Add STM32F7 I2C & STM32 USBPHYC support arm64: defconfig: Increase CMA size for VC4 arm64: defconfig: enable rockchip efuse ARM: imx_v6_v7_defconfig: Select CONFIG_GPIO_MAX732X by default ARM: imx_v6_v7_defconfig: enable imx6sll by default arm64: defconfig: Enable CONFIG_SND_AUDIO_GRAPH_CARD arm64: defconfig: makes SND_SIMPLE_CARD to module ARM: multi_v7_defconfig: enable the Meson PWM controller arm: multi_v7_defconfig: enable the Amlogic Meson I2C driver arm64: defconfig: enable CONFIG_SPI_ARMADA_3700 arm64: defconfig: Enable CONFIG_PINCTRL_MT7622 by default arm64: defconfig: Enable bluetooth USB support ... Signed-off-by: Olof Johansson <[email protected]>
2018-06-11ia64: disable CONFIG_PERFMON at least for nowLinus Torvalds1-0/+1
Al noted that the semantics of the ia64 perfmon mmap() is really wrong, and can cause serious VM problems. Before we look at whether it needs to be fixed, let's see if anybody even uses it, and mark it broken. It may be that we can just remove the code entirely. Reported-by: Alexander Viro <[email protected]> Acked-by: Matthew Wilcox <[email protected]> Acked-by: Stephane Eranian <[email protected]> Cc: Tony Luck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-06-11RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfigPalmer Dabbelt1-0/+1
The SBI exists on all RISC-V systems, so there's no reason not to compile this driver in. Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11RISC-V: Make our port sparse-cleanPalmer Dabbelt6-9/+14
This patch set contains a handful of fixes that clean up the sparse results for the RISC-V port. These patches shouldn't have any functional difference. The patches: * Use NULL instead of 0. * Clean up __user annotations. * Split __copy_user into two functions, to make the __user annotations valid. Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11RISC-V: Handle R_RISCV_32 in modulesAndreas Schwab1-0/+12
With CONFIG_MODVERSIONS=y the R_RISCV_32 relocation is used by the __kcrctab section. Signed-off-by: Andreas Schwab <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't setAlan Kao1-1/+1
The EXPORT_SYMBOL(_mcount) for RISC-V ended up inside a CONFIG_DYNAMIC_FTRACE ifdef. If you enable modules without enabling CONFIG_DYNAMIC_FTRACE then you'll get a build error without this patch because the modules won't be able to find _mcount. The new behavior is to export _mcount whenever CONFIG_FUNCTION_TRACER is defined. This matches what every other architecture is doing. Signed-off-by: Alan Kao <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Zong Li <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-11riscv: add riscv-specific predefines to CHECKFLAGSLuc Van Oostenryck1-0/+3
RISC-V uses the macro __riscv_xlen, predefined by GCC, to make the distinction between 32 or 64 bit code. However, sparse doesn't know anything about this macro which lead to wrong warnings and failures. Fix this by adding a define of __riscv_xlen to CHECKFLAGS and add one for __riscv too. Signed-off-by: Luc Van Oostenryck <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+2
Pull networking fixes from David Miller: 1) Fix several bpfilter/UMH bugs, in particular make the UMH build not depend upon X86 specific Kconfig symbols. From Alexei Starovoitov. 2) Fix handling of modified context pointer in bpf verifier, from Daniel Borkmann. 3) Kill regression in ifdown/ifup sequences for hv_netvsc driver, from Dexuan Cui. 4) When the bonding primary member name changes, we have to re-evaluate the bond->force_primary setting, from Xiangning Yu. 5) Eliminate possible padding beyone end of SKB in cdc_ncm driver, from Bjørn Mork. 6) RX queue length reported for UDP sockets in procfs and socket diag are inaccurate, from Paolo Abeni. 7) Fix br_fdb_find_port() locking, from Petr Machata. 8) Limit sk_rcvlowat values properly in TCP, from Soheil Hassas Yeganeh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits) tcp: limit sk_rcvlowat by the maximum receive buffer net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620 socket: close race condition between sock_close() and sockfs_setattr() net: bridge: Fix locking in br_fdb_find_port() udp: fix rx queue len reported by diag and proc interface cdc_ncm: avoid padding beyond end of skb net/sched: act_simple: fix parsing of TCA_DEF_DATA net: fddi: fix a possible null-ptr-deref net: aquantia: fix unsigned numvecs comparison with less than zero net: stmmac: fix build failure due to missing COMMON_CLK dependency bpfilter: fix race in pipe access bpf, xdp: fix crash in xdp_umem_unaccount_pages xsk: Fix umem fill/completion queue mmap on 32-bit tools/bpf: fix selftest get_cgroup_id_user bpfilter: fix OUTPUT_FORMAT umh: fix race condition net: mscc: ocelot: Fix uninitialized error in ocelot_netdevice_event() bonding: re-evaluate force_primary when the primary slave name changes ip_tunnel: Fix name string concatenate in __ip_tunnel_create() hv_netvsc: Fix a network regression after ifdown/ifup ...
2018-06-11sh: remove no-op macro VMLINUX_SYMBOL()Masahiro Yamada1-2/+2
VMLINUX_SYMBOL() is no-op unless CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX is defined. It has ever been selected only by BLACKFIN and METAG. VMLINUX_SYMBOL() is unneeded for SuperH-specific code. Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-11powerpc/kbuild: move -mprofile-kernel check to KconfigNicholas Piggin6-34/+8
This eliminates the workaround that requires disabling -mprofile-kernel by default in Kconfig. Signed-off-by: Nicholas Piggin <[email protected]> Acked-by: Michael Ellerman <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-11gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TESTMasahiro Yamada1-0/+1
We have enabled GCC_PLUGINS for COMPILE_TEST, but allmodconfig now produces new warnings. CC [M] drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.o drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_workarounds_nphy_rev7’: drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:16563:1: warning: the frame size of 3128 bytes is larger than 2048 bytes [-Wframe-larger-than=] } ^ drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_workarounds_nphy_rev3’: drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:16905:1: warning: the frame size of 2800 bytes is larger than 2048 bytes [-Wframe-larger-than=] } ^ drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_cal_txiqlo_nphy’: drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:26033:1: warning: the frame size of 2488 bytes is larger than 2048 bytes [-Wframe-larger-than=] } ^ It looks like GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is causing this. Add "depends on !COMPILE_TEST" to not dirturb the compile test. Reported-by: Stephen Rothwell <[email protected]> Suggested-by: Kees Cook <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-11gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TESTMasahiro Yamada1-4/+3
Now that the compiler's plugin support is checked in Kconfig, all{yes,mod}config will not be bothered. Remove 'depends on !COMPILE_TEST' for GCC_PLUGINS. 'depends on !COMPILE_TEST' for the following three are still kept: GCC_PLUGIN_CYC_COMPLEXITY GCC_PLUGIN_STRUCTLEAK_VERBOSE GCC_PLUGIN_RANDSTRUCT_PERFORMANCE Kees suggested to do so because the first two are too noisy, and the last one would reduce the compile test coverage. I commented the reasons in arch/Kconfig. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Kees Cook <[email protected]>
2018-06-11gcc-plugins: test plugin support in Kconfig and clean up MakefileMasahiro Yamada1-0/+10
Run scripts/gcc-plugin.sh from Kconfig so that users can enable GCC_PLUGINS only when the compiler supports building plugins. Kconfig defines a new symbol, PLUGIN_HOSTCC. This will contain the compiler (g++ or gcc) used for building plugins, or empty if the plugin can not be supported at all. This allows us to remove all ugly testing in Makefile.gcc-plugins. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Kees Cook <[email protected]>
2018-06-11gcc-plugins: move GCC version check for PowerPC to KconfigMasahiro Yamada1-1/+1
For PowerPC, GCC 5.2 is the requirement for GCC plugins. Move the version check to Kconfig so that the GCC plugin menus will be hidden if an older compiler is in use. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Reviewed-by: Kees Cook <[email protected]>
2018-06-10um: Fix raw interface optionsAnton Ivanov1-3/+2
Raw interface initialization needs QDISC_BYPASS. Otherwise it sees its own packets when transmitting. Fixes: 49da7e64f33e ("High Performance UML Vector Network Driver") Cc: <[email protected]> Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-06-10um: Fix initialization of vector queuesAnton Ivanov1-3/+12
UML vector drivers could derefence uninitialized memory when cleaning up after a queue allocation failure. Fixes: 49da7e64f33e ("High Performance UML Vector Network Driver") Cc: <[email protected]> Reported-by: Dan Capenter <[email protected]> Signed-off-by: Anton Ivanov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-06-10um: remove uml initcallsAlexander Pateenok3-23/+0
__uml_initcall() is not used and .uml.initcall.init section is empty: $ grep -r '__uml_initcall(' arch/um/include/shared/init.h:#define __uml_initcall(fn) \ $ readelf -s ../umobj/linux | grep __uml_initcall 23214: 00000000603b75d8 0 NOTYPE GLOBAL DEFAULT 32 __uml_initcall_start 25337: 00000000603b75d8 0 NOTYPE GLOBAL DEFAULT 32 __uml_initcall_end So it is unnecessary. Signed-off-by: Alexander Pateenok <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2018-06-10Merge branch 'core-rseq-for-linus' of ↵Linus Torvalds17-7/+76
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull restartable sequence support from Thomas Gleixner: "The restartable sequences syscall (finally): After a lot of back and forth discussion and massive delays caused by the speculative distraction of maintainers, the core set of restartable sequences has finally reached a consensus. It comes with the basic non disputed core implementation along with support for arm, powerpc and x86 and a full set of selftests It was exposed to linux-next earlier this week, so it does not fully comply with the merge window requirements, but there is really no point to drag it out for yet another cycle" * 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: Provide Makefile, scripts, gitignore rseq/selftests: Provide parametrized tests rseq/selftests: Provide basic percpu ops test rseq/selftests: Provide basic test rseq/selftests: Provide rseq library selftests/lib.mk: Introduce OVERRIDE_TARGETS powerpc: Wire up restartable sequences system call powerpc: Add syscall detection for restartable sequences powerpc: Add support for restartable sequences x86: Wire up restartable sequence system call x86: Add support for restartable sequences arm: Wire up restartable sequences system call arm: Add syscall detection for restartable sequences arm: Add restartable sequences support rseq: Introduce restartable sequences system call uapi/headers: Provide types_32_64.h
2018-06-10Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds19-57/+113
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 updates and fixes from Thomas Gleixner: - Fix the (late) fallout from the vector management rework causing hlist corruption and irq descriptor reference leaks caused by a missing sanity check. The straight forward fix triggered another long standing issue to surface. The pre rework code hid the issue due to being way slower, but now the chance that user space sees an EBUSY error return when updating irq affinities is way higher, though quite a bunch of userspace tools do not handle it properly despite the fact that EBUSY could be returned for at least 10 years. It turned out that the EBUSY return can be avoided completely by utilizing the existing delayed affinity update mechanism for irq remapped scenarios as well. That's a bit more error handling in the kernel, but avoids fruitless fingerpointing discussions with tool developers. - Decouple PHYSICAL_MASK from AMD SME as its going to be required for the upcoming Intel memory encryption support as well. - Handle legacy device ACPI detection properly for newer platforms - Fix the wrong argument ordering in the vector allocation tracepoint - Simplify the IDT setup code for the APIC=n case - Use the proper string helpers in the MTRR code - Remove a stale unused VDSO source file - Convert the microcode update lock to a raw spinlock as its used in atomic context. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Enable CMT and MBM on new Skylake stepping x86/apic/vector: Print APIC control bits in debugfs genirq/affinity: Defer affinity setting if irq chip is busy x86/platform/uv: Use apic_ack_irq() x86/ioapic: Use apic_ack_irq() irq_remapping: Use apic_ack_irq() x86/apic: Provide apic_ack_irq() genirq/migration: Avoid out of line call if pending is not set genirq/generic_pending: Do not lose pending affinity update x86/apic/vector: Prevent hlist corruption and leaks x86/vector: Fix the args of vector_alloc tracepoint x86/idt: Simplify the idt_setup_apic_and_irq_gates() x86/platform/uv: Remove extra parentheses x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME x86: Mark native_set_p4d() as __always_inline x86/microcode: Make the late update update_lock a raw lock for RT x86/mtrr: Convert to use strncpy_from_user() helper x86/mtrr: Convert to use match_string() helper x86/vdso: Remove unused file x86/i8237: Register device based on FADT legacy boot flag
2018-06-10Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds5-14/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "Three small commits updating the SSB mitigation to take the updated AMD mitigation variants into account" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Switch the selection of mitigation from CPU vendor to CPU features x86/bugs: Add AMD's SPEC_CTRL MSR usage x86/bugs: Add AMD's variant of SSB_NO
2018-06-09riscv: split the declaration of __copy_userLuc Van Oostenryck3-6/+11
We use a single __copy_user assembly function to copy memory both from and to userspace. While this works, it triggers sparse errors because we're implicitly casting between the kernel and user address spaces by calling __copy_user. This patch splits the C declaration into a pair of functions, __asm_copy_{to,from}_user, that have sane semantics WRT __user. This split make things fine from sparse's point of view. The assembly implementation keeps a single definition but add a double ENTRY() for it, one for __asm_copy_to_user and another one for __asm_copy_from_user. The result is a spare-safe implementation that pays no performance or code size penalty. Signed-off-by: Luc Van Oostenryck <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-06-09x86/intel_rdt: Enable CMT and MBM on new Skylake steppingTony Luck1-0/+2
New stepping of Skylake has fixes for cache occupancy and memory bandwidth monitoring. Update the code to enable these by default on newer steppings. Signed-off-by: Tony Luck <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: [email protected] # v4.14 Cc: Vikas Shivappa <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-06-08Merge tag 'libnvdimm-for-4.18' of ↵Linus Torvalds3-0/+88
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This adds a user for the new 'bytes-remaining' updates to memcpy_mcsafe() that you already received through Ingo via the x86-dax- for-linus pull. Not included here, but still targeting this cycle, is support for handling memory media errors (poison) consumed via userspace dax mappings. Summary: - DAX broke a fundamental assumption of truncate of file mapped pages. The truncate path assumed that it is safe to disconnect a pinned page from a file and let the filesystem reclaim the physical block. With DAX the page is equivalent to the filesystem block. Introduce dax_layout_busy_page() to enable filesystems to wait for pinned DAX pages to be released. Without this wait a filesystem could allocate blocks under active device-DMA to a new file. - DAX arranges for the block layer to be bypassed and uses dax_direct_access() + copy_to_iter() to satisfy read(2) calls. However, the memcpy_mcsafe() facility is available through the pmem block driver. In order to safely handle media errors, via the DAX block-layer bypass, introduce copy_to_iter_mcsafe(). - Fix cache management policy relative to the ACPI NFIT Platform Capabilities Structure to properly elide cache flushes when they are not necessary. The table indicates whether CPU caches are power-fail protected. Clarify that a deep flush is always performed on REQ_{FUA,PREFLUSH} requests" * tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) dax: Use dax_write_cache* helpers libnvdimm, pmem: Do not flush power-fail protected CPU caches libnvdimm, pmem: Unconditionally deep flush on *sync libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH acpi, nfit: Remove ecc_unit_size dax: dax_insert_mapping_entry always succeeds libnvdimm, e820: Register all pmem resources libnvdimm: Debug probe times linvdimm, pmem: Preserve read-only setting for pmem devices x86, nfit_test: Add unit test for memcpy_mcsafe() pmem: Switch to copy_to_iter_mcsafe() dax: Report bytes remaining in dax_iomap_actor() dax: Introduce a ->copy_to_iter dax operation uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation xfs, dax: introduce xfs_break_dax_layouts() xfs: prepare xfs_break_layouts() for another layout type xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL mm, fs, dax: handle layout changes to pinned dax mappings mm: fix __gup_device_huge vs unmap mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS ...
2018-06-08Merge branch 'for-4.18/mcsafe' into libnvdimm-for-nextDan Williams7-62/+174
2018-06-08Merge tag 'regulator-v4.18' of ↵Linus Torvalds1-6/+22
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite a lot of core work this time around, though not 100% successful. We gained support for runtime mode changes thanks to David Collins and improved support for write only regulators (ones where we can't read back the configuration) from Douglas Anderson. There's been quite a bit of work from Linus Walleij on converting from specfying GPIOs by numbers to descriptors. Sadly the testing turned out to be less good than we had hoped and so a lot of this had to be reverted. We also have the start of updates to use coupled regulators from Maciej Purski, unfortunately there are further problems there so the last couple of patches have been reverted. We also have new drivers for BD71837 and SY8106A devices, SAW regulators on Qualcomm SPMI and dropped support for some preproduction chips that never made it to market from the AB8500 driver" * tag 'regulator-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (57 commits) regulator: gpio: Revert ARM: pxa, regulator: fix building ezx e680 regulator: Revert coupled regulator support again regulator: wm8994: Fix shared GPIOs regulator: max77686: Fix shared GPIOs regulator: bd71837: BD71837 PMIC regulator driver regulator: bd71837: Devicetree bindings for BD71837 regulators regulator: gpio: Get enable GPIO using GPIO descriptor regulator: fixed: Convert to use GPIO descriptor only regulator: s2mps11: Fix boot on Odroid XU3 dt-bindings: qcom_spmi: Document SAW support regulator: qcom_spmi: Add support for SAW regulator: tps65090: Pass descriptor instead of GPIO number regulator: s5m8767: Pass descriptor instead of GPIO number regulator: pfuze100: Delete reference to ena_gpio regulator: max8952: Pass descriptor instead of GPIO number regulator: lp8788-ldo: Pass descriptor instead of GPIO number regulator: lm363x: Pass descriptor instead of GPIO number regulator: max8973: Pass descriptor instead of GPIO number regulator: mc13xxx-core: Switch to SPDX identifier ...
2018-06-08Merge tag 'arm64-upstream' of ↵Linus Torvalds44-116/+807
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Apart from the core arm64 and perf changes, the Spectre v4 mitigation touches the arm KVM code and the ACPI PPTT support touches drivers/ (acpi and cacheinfo). I should have the maintainers' acks in place. Summary: - Spectre v4 mitigation (Speculative Store Bypass Disable) support for arm64 using SMC firmware call to set a hardware chicken bit - ACPI PPTT (Processor Properties Topology Table) parsing support and enable the feature for arm64 - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The primary motivation is Scalable Vector Extensions which requires more space on the signal frame than the currently defined MINSIGSTKSZ - ARM perf patches: allow building arm-cci as module, demote dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous cleanups - cmpwait() WFE optimisation to avoid some spurious wakeups - L1_CACHE_BYTES reverted back to 64 (for performance reasons that have to do with some network allocations) while keeping ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual hardware Cache Writeback Granule - Turn LSE atomics on by default in Kconfig - Kernel fault reporting tidying - Some #include and miscellaneous cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits) arm64: Fix syscall restarting around signal suppressed by tracer arm64: topology: Avoid checking numa mask for scheduler MC selection ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled arm64: cpu_errata: include required headers arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file arm64: signal: Report signal frame size to userspace via auxv arm64/sve: Thin out initialisation sanity-checks for sve_max_vl arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests arm64: KVM: Add ARCH_WORKAROUND_2 support for guests arm64: KVM: Add HYP per-cpu accessors arm64: ssbd: Add prctl interface for per-thread mitigation arm64: ssbd: Introduce thread flag to control userspace mitigation arm64: ssbd: Restore mitigation status on CPU resume arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation arm64: ssbd: Add global mitigation state accessor arm64: Add 'ssbd' command-line option arm64: Add ARCH_WORKAROUND_2 probing arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2 arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1 ...
2018-06-08Merge tag 'for-linus-4.18-rc1-tag' of ↵Linus Torvalds3-27/+91
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "This contains some minor code cleanups (fixing return types of functions), some fixes for Linux running as Xen PVH guest, and adding of a new guest resource mapping feature for Xen tools" * tag 'for-linus-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/PVH: Make GDT selectors PVH-specific xen/PVH: Set up GS segment for stack canary xen/store: do not store local values in xen_start_info xen-netfront: fix xennet_start_xmit()'s return type xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE xen: Change return type to vm_fault_t
2018-06-08arm64: Fix syscall restarting around signal suppressed by tracerDave Martin1-2/+3
Commit 17c2895 ("arm64: Abstract syscallno manipulation") abstracts out the pt_regs.syscallno value for a syscall cancelled by a tracer as NO_SYSCALL, and provides helpers to set and check for this condition. However, the way this was implemented has the unintended side-effect of disabling part of the syscall restart logic. This comes about because the second in_syscall() check in do_signal() re-evaluates the "in a syscall" condition based on the updated pt_regs instead of the original pt_regs. forget_syscall() is explicitly called prior to the second check in order to prevent restart logic in the ret_to_user path being spuriously triggered, which means that the second in_syscall() check always yields false. This triggers a failure in tools/testing/selftests/seccomp/seccomp_bpf.c, when using ptrace to suppress a signal that interrups a nanosleep() syscall. Misbehaviour of this type is only expected in the case where a tracer suppresses a signal and the target process is either being single-stepped or the interrupted syscall attempts to restart via -ERESTARTBLOCK. This patch restores the old behaviour by performing the in_syscall() check only once at the start of the function. Fixes: 17c289586009 ("arm64: Abstract syscallno manipulation") Signed-off-by: Dave Martin <[email protected]> Reported-by: Sumit Semwal <[email protected]> Cc: Will Deacon <[email protected]> Cc: <[email protected]> # 4.14.x- Signed-off-by: Catalin Marinas <[email protected]>
2018-06-08arm64: move GCC version check for ARCH_SUPPORTS_INT128 to KconfigMasahiro Yamada2-6/+1
This becomes much neater in Kconfig. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Will Deacon <[email protected]> Reviewed-by: Kees Cook <[email protected]>
2018-06-08stack-protector: test compiler capability in Kconfig and drop AUTO modeMasahiro Yamada2-22/+21
Move the test for -fstack-protector(-strong) option to Kconfig. If the compiler does not support the option, the corresponding menu is automatically hidden. If STRONG is not supported, it will fall back to REGULAR. If REGULAR is not supported, it will be disabled. This means, AUTO is implicitly handled by the dependency solver of Kconfig, hence removed. I also turned the 'choice' into only two boolean symbols. The use of 'choice' is not a good idea here, because all of all{yes,mod,no}config would choose the first visible value, while we want allnoconfig to disable as many features as possible. X86 has additional shell scripts in case the compiler supports those options, but generates broken code. I added CC_HAS_SANE_STACKPROTECTOR to test this. I had to add -m32 to gcc-x86_32-has-stack-protector.sh to make it work correctly. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Kees Cook <[email protected]>
2018-06-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds21-33/+23
Merge updates from Andrew Morton: - a few misc things - ocfs2 updates - v9fs updates - MM - procfs updates - lib/ updates - autofs updates * emailed patches from Andrew Morton <[email protected]>: (118 commits) autofs: small cleanup in autofs_getpath() autofs: clean up includes autofs: comment on selinux changes needed for module autoload autofs: update MAINTAINERS entry for autofs autofs: use autofs instead of autofs4 in documentation autofs: rename autofs documentation files autofs: create autofs Kconfig and Makefile autofs: delete fs/autofs4 source files autofs: update fs/autofs4/Makefile autofs: update fs/autofs4/Kconfig autofs: copy autofs4 to autofs autofs4: use autofs instead of autofs4 everywhere autofs4: merge auto_fs.h and auto_fs4.h fs/binfmt_misc.c: do not allow offset overflow checkpatch: improve patch recognition lib/ucs2_string.c: add MODULE_LICENSE() lib/mpi: headers cleanup lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock lib/idr.c: remove simple_ida_lock lib/bitmap.c: micro-optimization for __bitmap_complement() ...
2018-06-07mm: add pt_mm to struct pageMatthew Wilcox1-3/+2
For pgd page table pages, x86 overloads the page->index field to store a pointer to the mm_struct. Rename this to pt_mm so it's visible to other users. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Matthew Wilcox <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Jérôme Glisse <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Lai Jiangshan <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: Randy Dunlap <[email protected]> Cc: Andrey Ryabinin <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-06-07s390: use _refcount for pgtablesMatthew Wilcox1-9/+12
Patch series "Rearrange struct page", v6. As presented at LSFMM, this patch-set rearranges struct page to give more contiguous usable space to users who have allocated a struct page for their own purposes. For a graphical view of before-and-after, see the first two tabs of https://docs.google.com/spreadsheets/d/1tvCszs_7FXrjei9_mtFiKV6nW1FLnYyvPvW-qNZhdog/edit?usp=sharing Highlights: - deferred_list now really exists in struct page instead of just a comment. - hmm_data also exists in struct page instead of being a nasty hack. - x86's PGD pages have a real pointer to the mm_struct. - VMalloc pages now have all sorts of extra information stored in them to help with debugging and tuning. - rcu_head is no longer tied to slab in case anyone else wants to free pages by RCU. - slub's counters no longer share space with _refcount. - slub's freelist+counters are now naturally dword aligned. - slub loses a parameter to a lot of functions and a sysfs file. This patch (of 17): s390 borrows the storage used for _mapcount in struct page in order to account whether the bottom or top half is being used for 2kB page tables. I want to use that for something else, so use the top byte of _refcount instead of the bottom byte of _mapcount. _refcount may temporarily be incremented by other CPUs that see a stale pointer to this page in the page cache, but each CPU can only increment it by one, and there are no systems with 2^24 CPUs today, so they will not change the upper byte of _refcount. We do have to be a little careful not to lose any of their writes (as they will subsequently decrement the counter). Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Matthew Wilcox <[email protected]> Acked-by: Martin Schwidefsky <[email protected]> Cc: "Kirill A . Shutemov" <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Lai Jiangshan <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Jérôme Glisse <[email protected]> Cc: Randy Dunlap <[email protected]> Cc: Andrey Ryabinin <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-06-07mm: introduce ARCH_HAS_PTE_SPECIALLaurent Dufour19-21/+9
Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Laurent Dufour <[email protected]> Suggested-by: Jerome Glisse <[email protected]> Reviewed-by: Jerome Glisse <[email protected]> Acked-by: David Rientjes <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Aneesh Kumar K . V" <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Cc: David S. Miller <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Albert Ou <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: David Rientjes <[email protected]> Cc: Robin Murphy <[email protected]> Cc: Christophe LEROY <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-06-07x86/mce: Check for alternate indication of machine check recovery on SkylakeTony Luck1-2/+9
Currently we just check the "CAPID0" register to see whether the CPU can recover from machine checks. But there are also some special SKUs which do not have all advanced RAS features, but do enable machine check recovery for use with NVDIMMs. Add a check for any of bits {8:5} in the "CAPID5" register (each reports some NVDIMM mode available, if any of them are set, then the system supports memory machine check recovery). Signed-off-by: Tony Luck <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Qiuxu Zhuo <[email protected]> Cc: Ashok Raj <[email protected]> Cc: [email protected] # 4.9 Cc: Dan Williams <[email protected]> Cc: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/03cbed6e99ddafb51c2eadf9a3b7c8d7a0cc204e.1527283897.git.tony.luck@intel.com
2018-06-07x86/mce: Improve error message when kernel cannot recoverTony Luck1-0/+5
Since we added support to add recovery from some errors inside the kernel in: commit b2f9d678e28c ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries") we have done a less than stellar job at reporting the cause of recoverable machine checks that occur in other parts of the kernel. The user just gets the unhelpful message: mce: [Hardware Error]: Machine check: Action required: unknown MCACOD doubly unhelpful when they check the manual for the reported IA32_MSR_STATUS.MCACOD and see that it is listed as one of the standard recoverable values. Add an extra rule to the MCE severity table to catch this case and report it as: mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Fixes: b2f9d678e28c ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries") Signed-off-by: Tony Luck <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Qiuxu Zhuo <[email protected]> Cc: Ashok Raj <[email protected]> Cc: [email protected] # 4.6+ Cc: Dan Williams <[email protected]> Cc: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/4cc7c465150a9a48b8b9f45d0b840278e77eb9b5.1527283897.git.tony.luck@intel.com
2018-06-07net: in virtio_net_hdr only add VLAN_HLEN to csum_start if payload holds vlanWillem de Bruijn1-1/+2
Tun, tap, virtio, packet and uml vector all use struct virtio_net_hdr to communicate packet metadata to userspace. For skbuffs with vlan, the first two return the packet as it may have existed on the wire, inserting the VLAN tag in the user buffer. Then virtio_net_hdr.csum_start needs to be adjusted by VLAN_HLEN bytes. Commit f09e2249c4f5 ("macvtap: restore vlan header on user read") added this feature to macvtap. Commit 3ce9b20f1971 ("macvtap: Fix csum_start when VLAN tags are present") then fixed up csum_start. Virtio, packet and uml do not insert the vlan header in the user buffer. When introducing virtio_net_hdr_from_skb to deduplicate filling in the virtio_net_hdr, the variant from macvtap which adds VLAN_HLEN was applied uniformly, breaking csum offset for packets with vlan on virtio and packet. Make insertion of VLAN_HLEN optional. Convert the callers to pass it when needed. Fixes: e858fae2b0b8f4 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion") Fixes: 1276f24eeef2 ("packet: use common code for virtio_net_hdr and skb GSO conversion") Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-07Merge tag 'pci-v4.18-changes' of ↵Linus Torvalds13-326/+177
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
2018-06-07Merge tag 'media/v4.18-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - remove of atomisp driver from staging, as nobody would have time to dedicate huge efforts to fix all the problems there. Also, we have a feeling that the driver may not even run the way it is. - move Zoran driver to staging, in order to be either fixed to use VB2 and the proper media kAPIs or to be removed - remove videobuf-dvb driver, with is unused for a while - some V4L2 documentation fixes/improvements - new sensor drivers: imx258 and ov7251 - a new driver was added to allow using I2C transparent drivers - several improvements at the ddbridge driver - several improvements at the ISDB pt1 driver, making it more coherent with the DVB framework - added a new platform driver for MIPI CSI-2 RX: cadence - now, all media drivers can be compiled on x86 with COMPILE_TEST - almost all media drivers now build on non-x86 architectures with COMPILE_TEST - lots of other random stuff: cleanups, support for new board models, bug fixes, etc * tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) media: omap2: fix compile-testing with FB_OMAP2=m media: media/radio/Kconfig: add back RADIO_ISA media: v4l2-ioctl.c: fix missing unlock in __video_do_ioctl() media: pxa_camera: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power media: arch: sh: migor: Fix TW9910 PDN gpio media: staging: tegra-vde: Reset VDE regardless of memory client resetting failure media: marvel-ccic: mmp: select VIDEOBUF2_VMALLOC/DMA_CONTIG media: marvel-ccic: allow ccic and mmp drivers to coexist media: uvcvideo: Prevent setting unavailable flags media: ddbridge: conditionally enable fast TS for stv0910-equipped bridges media: dvb-frontends/stv0910: make TS speed configurable media: ddbridge/mci: add identifiers to function definition arguments media: ddbridge/mci: protect against out-of-bounds array access in stop() media: rc: ensure input/lirc device can be opened after register media: rc: nuvoton: Keep device enabled during reg init media: rc: nuvoton: Keep track of users on CIR enable/disable media: rc: nuvoton: Tweak the interrupt enabling dance media: uvcvideo: Support realtek's UVC 1.5 device media: uvcvideo: Fix driver reference counting media: gspca_zc3xx: Enable short exposure times for OV7648 ...
Powered by cgit, Gruvboxed by Blaster4385.