aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-05-09Merge tag 'riscv-for-linus-5.7-rc5' of ↵Linus Torvalds9-34/+121
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A smattering of fixes and cleanups: - Dead code removal. - Exporting riscv_cpuid_to_hartid_mask for modules. - Per-CPU tracking of ISA features. - Setting max_pfn correctly when probing memory. - Adding a note to the VDSO so glibc can check the kernel's version without a uname(). - A fix to force the bootloader to initialize the boot spin tables, which still get used as a fallback when SBI-0.1 is enabled" * tag 'riscv-for-linus-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Remove unused code from STRICT_KERNEL_RWX riscv: force __cpu_up_ variables to put in data section riscv: add Linux note to vdso riscv: set max_pfn to the PFN of the last page RISC-V: Remove N-extension related defines RISC-V: Add bitmap reprensenting ISA features common across CPUs RISC-V: Export riscv_cpuid_to_hartid_mask() API
2020-05-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge misc fixes from Andrew Morton: "14 fixes and one selftest to verify the ipc fixes herein" * emailed patches from Andrew Morton <[email protected]>: mm: limit boost_watermark on small zones ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST mm/vmscan: remove unnecessary argument description of isolate_lru_pages() epoll: atomically remove wait entry on wake up kselftests: introduce new epoll60 testcase for catching lost wakeups percpu: make pcpu_alloc() aware of current gfp context mm/slub: fix incorrect interpretation of s->offset scripts/gdb: repair rb_first() and rb_last() eventpoll: fix missing wakeup for ovflist in ep_poll_callback arch/x86/kvm/svm/sev.c: change flag passed to GUP fast in sev_pin_memory() scripts/decodecode: fix trapping instruction formatting kernel/kcov.c: fix typos in kcov_remote_start documentation mm/page_alloc: fix watchdog soft lockups during set_zone_contiguous() mm, memcg: fix error return value of mem_cgroup_css_alloc() ipc/mqueue.c: change __do_notify() to bypass check_kill_permission()
2020-05-08KVM: SVM: Disable AVIC before setting V_IRQSuravee Suthikulpanit1-1/+12
The commit 64b5bd270426 ("KVM: nSVM: ignore L1 interrupt window while running L2 with V_INTR_MASKING=1") introduced a WARN_ON, which checks if AVIC is enabled when trying to set V_IRQ in the VMCB for enabling irq window. The following warning is triggered because the requesting vcpu (to deactivate AVIC) does not get to process APICv update request for itself until the next #vmexit. WARNING: CPU: 0 PID: 118232 at arch/x86/kvm/svm/svm.c:1372 enable_irq_window+0x6a/0xa0 [kvm_amd] RIP: 0010:enable_irq_window+0x6a/0xa0 [kvm_amd] Call Trace: kvm_arch_vcpu_ioctl_run+0x6e3/0x1b50 [kvm] ? kvm_vm_ioctl_irq_line+0x27/0x40 [kvm] ? _copy_to_user+0x26/0x30 ? kvm_vm_ioctl+0xb3e/0xd90 [kvm] ? set_next_entity+0x78/0xc0 kvm_vcpu_ioctl+0x236/0x610 [kvm] ksys_ioctl+0x8a/0xc0 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x58/0x210 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes by sending APICV update request to all other vcpus, and immediately update APIC for itself. Signed-off-by: Suravee Suthikulpanit <[email protected]> Link: https://lkml.org/lkml/2020/5/2/167 Fixes: 64b5bd270426 ("KVM: nSVM: ignore L1 interrupt window while running L2 with V_INTR_MASKING=1") Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-08KVM: Introduce kvm_make_all_cpus_request_except()Suravee Suthikulpanit2-2/+2
This allows making request to all other vcpus except the one specified in the parameter. Signed-off-by: Suravee Suthikulpanit <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-08KVM: VMX: pass correct DR6 for GD userspace exitPaolo Bonzini1-1/+1
When KVM_EXIT_DEBUG is raised for the disabled-breakpoints case (DR7.GD), DR6 was incorrectly copied from the value in the VM. Instead, DR6.BD should be set in order to catch this case. On AMD this does not need any special code because the processor triggers a #DB exception that is intercepted. However, the testcase would fail without the previous patch because both DR6.BS and DR6.BD would be set. Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-08KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6Paolo Bonzini5-30/+32
There are two issues with KVM_EXIT_DEBUG on AMD, whose root cause is the different handling of DR6 on intercepted #DB exceptions on Intel and AMD. On Intel, #DB exceptions transmit the DR6 value via the exit qualification field of the VMCS, and the exit qualification only contains the description of the precise event that caused a vmexit. On AMD, instead the DR6 field of the VMCB is filled in as if the #DB exception was to be injected into the guest. This has two effects when guest debugging is in use: * the guest DR6 is clobbered * the kvm_run->debug.arch.dr6 field can accumulate more debug events, rather than just the last one that happened (the testcase in the next patch covers this issue). This patch fixes both issues by emulating, so to speak, the Intel behavior on AMD processors. The important observation is that (after the previous patches) the VMCB value of DR6 is only ever observable from the guest is KVM_DEBUGREG_WONT_EXIT is set. Therefore we can actually set vmcb->save.dr6 to any value we want as long as KVM_DEBUGREG_WONT_EXIT is clear, which it will be if guest debugging is enabled. Therefore it is possible to enter the guest with an all-zero DR6, reconstruct the #DB payload from the DR6 we get at exit time, and let kvm_deliver_exception_payload move the newly set bits into vcpu->arch.dr6. Some extra bits may be included in the payload if KVM_DEBUGREG_WONT_EXIT is set, but this is harmless. This may not be the most optimized way to deal with this, but it is simple and, being confined within SVM code, it gets rid of the set_dr6 callback and kvm_update_dr6. Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-08KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6Paolo Bonzini5-28/+21
kvm_x86_ops.set_dr6 is only ever called with vcpu->arch.dr6 as the second argument. Ensure that the VMCB value is synchronized to vcpu->arch.dr6 on #DB (both "normal" and nested) and nested vmentry, so that the current value of DR6 is always available in vcpu->arch.dr6. The get_dr6 callback can just access vcpu->arch.dr6 and becomes redundant. Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-07arch/x86/kvm/svm/sev.c: change flag passed to GUP fast in sev_pin_memory()Janakarajan Natarajan1-1/+1
When trying to lock read-only pages, sev_pin_memory() fails because FOLL_WRITE is used as the flag for get_user_pages_fast(). Commit 73b0140bf0fe ("mm/gup: change GUP fast to use flags rather than a write 'bool'") updated the get_user_pages_fast() call sites to use flags, but incorrectly updated the call in sev_pin_memory(). As the original coding of this call was correct, revert the change made by that commit. Fixes: 73b0140bf0fe ("mm/gup: change GUP fast to use flags rather than a write 'bool'") Signed-off-by: Janakarajan Natarajan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Ira Weiny <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Vitaly Kuznetsov <[email protected]> Cc: Wanpeng Li <[email protected]> Cc: Jim Mattson <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H . Peter Anvin" <[email protected]> Cc: Mike Marshall <[email protected]> Cc: Brijesh Singh <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-05-07Merge tag 'arm64-fixes' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Avoid potential NULL dereference in huge_pte_alloc() on pmd_alloc() failure" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hugetlb: avoid potential NULL dereference
2020-05-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-39/+57
Pull kvm fixes from Paolo Bonzini: "Bugfixes, mostly for ARM and AMD, and more documentation. Slightly bigger than usual because I couldn't send out what was pending for rc4, but there is nothing worrisome going on. I have more fixes pending for guest debugging support (gdbstub) but I will send them next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits) KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly KVM: selftests: Fix build for evmcs.h kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bits KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB path docs/virt/kvm: Document configuring and running nested guests KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts KVM: x86: Fixes posted interrupt check for IRQs delivery modes KVM: SVM: fill in kvm_run->debug.arch.dr[67] KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warning KVM: arm64: Fix 32bit PC wrap-around KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITS KVM: arm64: Save/restore sp_el0 as part of __guest_enter KVM: arm64: Delete duplicated label in invalid_vector KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi() KVM: arm64: vgic-v3: Retire all pending LPIs on vcpu destroy KVM: arm: vgic-v2: Only use the virtual state when userspace accesses pending bits KVM: arm: vgic: Only use the virtual state when userspace accesses enable bits KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read KVM: arm64: PSCI: Forbid 64bit functions for 32bit guests ...
2020-05-07KVM: nSVM: trap #DB and #BP to userspace if guest debugging is onPaolo Bonzini1-0/+8
Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-07KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUGPeter Xu1-1/+1
When single-step triggered with KVM_SET_GUEST_DEBUG, we should fill in the pc value with current linear RIP rather than the cached singlestep address. Signed-off-by: Peter Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-07KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUGPeter Xu1-1/+1
RTM should always been set even with KVM_EXIT_DEBUG on #DB. Signed-off-by: Peter Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-07KVM: x86: fix DR6 delivery for various cases of #DB injectionPaolo Bonzini3-11/+9
Go through kvm_queue_exception_p so that the payload is correctly delivered through the exit qualification, and add a kvm_update_dr6 call to kvm_deliver_exception_payload that is needed on AMD. Reported-by: Peter Xu <[email protected]> Reviewed-by: Peter Xu <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-07KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properlyPeter Xu3-0/+3
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared as supported. My wild guess is that userspaces like QEMU are using "#ifdef KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be wrong because the compilation host may not be the runtime host. The userspace might still want to keep the old "#ifdef" though to not break the guest debug on old kernels. Signed-off-by: Peter Xu <[email protected]> Message-Id: <[email protected]> [Do the same for PPC and s390. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-07arm64: hugetlb: avoid potential NULL dereferenceMark Rutland1-0/+2
The static analyzer in GCC 10 spotted that in huge_pte_alloc() we may pass a NULL pmdp into pte_alloc_map() when pmd_alloc() returns NULL: | CC arch/arm64/mm/pageattr.o | CC arch/arm64/mm/hugetlbpage.o | from arch/arm64/mm/hugetlbpage.c:10: | arch/arm64/mm/hugetlbpage.c: In function ‘huge_pte_alloc’: | ./arch/arm64/include/asm/pgtable-types.h:28:24: warning: dereference of NULL ‘pmdp’ [CWE-690] [-Wanalyzer-null-dereference] | ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’ | arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’ | |arch/arm64/mm/hugetlbpage.c:232:10: | |./arch/arm64/include/asm/pgtable-types.h:28:24: | ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’ | arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’ This can only occur when the kernel cannot allocate a page, and so is unlikely to happen in practice before other systems start failing. We can avoid this by bailing out if pmd_alloc() fails, as we do earlier in the function if pud_alloc() fails. Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit") Signed-off-by: Mark Rutland <[email protected]> Reported-by: Kyrill Tkachov <[email protected]> Cc: <[email protected]> # 4.5.x- Cc: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2020-05-07powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUGChristophe Leroy1-1/+1
gpr2 is not a parametre of kuap_check(), it doesn't exist. Use gpr instead. Fixes: a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/ea599546f2a7771bde551393889e44e6b2632332.1587368807.git.christophe.leroy@c-s.fr
2020-05-07powerpc/ima: Fix secure boot rules in ima arch policyNayna Jain1-3/+3
To prevent verifying the kernel module appended signature twice (finit_module), once by the module_sig_check() and again by IMA, powerpc secure boot rules define an IMA architecture specific policy rule only if CONFIG_MODULE_SIG_FORCE is not enabled. This, unfortunately, does not take into account the ability of enabling "sig_enforce" on the boot command line (module.sig_enforce=1). Including the IMA module appraise rule results in failing the finit_module syscall, unless the module signing public key is loaded onto the IMA keyring. This patch fixes secure boot policy rules to be based on CONFIG_MODULE_SIG instead. Fixes: 4238fad366a6 ("powerpc/ima: Add support to initialize ima policy rules") Signed-off-by: Nayna Jain <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Mimi Zohar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-05-07powerpc/64s/kuap: Restore AMR in fast_interrupt_returnNicholas Piggin1-1/+3
Interrupts that use fast_interrupt_return actually do lock AMR, but they have been ones which tend to come from userspace (or kernel bugs) in radix mode. With kuap on hash, segment interrupts are taken in kernel often, which quickly breaks due to the missing restore. Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-05-07ARM: futex: Address build warningThomas Gleixner1-2/+7
Stephen reported the following build warning on a ARM multi_v7_defconfig build with GCC 9.2.1: kernel/futex.c: In function 'do_futex': kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] 1676 | return oldval == cmparg; | ~~~~~~~^~~~~~~~~ kernel/futex.c:1652:6: note: 'oldval' was declared here 1652 | int oldval, ret; | ^~~~~~ introduced by commit a08971e9488d ("futex: arch_futex_atomic_op_inuser() calling conventions change"). While that change should not make any difference it confuses GCC which fails to work out that oldval is not referenced when the return value is not zero. GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the early return, the issue is with the assembly macros. GCC fails to detect that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT which makes oldval uninteresting. The store to the callsite supplied oldval pointer is conditional on ret == 0. The straight forward way to solve this is to make the store unconditional. Aside of addressing the build warning this makes sense anyway because it removes the conditional from the fastpath. In the error case the stored value is uninteresting and the extra store does not matter at all. Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-05-06Merge branch 'linus' of ↵Linus Torvalds11-34/+69
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a potential scheduling latency problem for the algorithms used by WireGuard" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arch/nhpoly1305 - process in explicit 4k chunks crypto: arch/lib - limit simd usage to 4k chunks
2020-05-06Merge tag 'kvm-s390-master-5.7-3' of ↵Paolo Bonzini1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix for running nested uner z/VM There are circumstances when running nested under z/VM that would trigger a WARN_ON_ONCE. Remove the WARN_ON_ONCE. Long term we certainly want to make this code more robust and flexible, but just returning instead of WARNING makes guest bootable again.
2020-05-06KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properlyPeter Xu3-0/+3
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared as supported. My wild guess is that userspaces like QEMU are using "#ifdef KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be wrong because the compilation host may not be the runtime host. The userspace might still want to keep the old "#ifdef" though to not break the guest debug on old kernels. Signed-off-by: Peter Xu <[email protected]> Message-Id: <[email protected]> [Do the same for PPC and s390. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-06kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bitsPaolo Bonzini1-15/+5
Using CPUID data can be useful for the processor compatibility check, but that's it. Using it to compute guest-reserved bits can have both false positives (such as LA57 and UMIP which we are already handling) and false negatives: in particular, with this patch we don't allow anymore a KVM guest to set CR4.PKE when CR4.PKE is clear on the host. Fixes: b9dd21e104bc ("KVM: x86: simplify handling of PKRU") Reported-by: Jim Mattson <[email protected]> Tested-by: Jim Mattson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-06KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB pathSean Christopherson1-0/+3
Clear CF and ZF in the VM-Exit path after doing __FILL_RETURN_BUFFER so that KVM doesn't interpret clobbered RFLAGS as a VM-Fail. Filling the RSB has always clobbered RFLAGS, its current incarnation just happens clear CF and ZF in the processs. Relying on the macro to clear CF and ZF is extremely fragile, e.g. commit 089dd8e53126e ("x86/speculation: Change FILL_RETURN_BUFFER to work with objtool") tweaks the loop such that the ZF flag is always set. Reported-by: Qian Cai <[email protected]> Cc: Rick Edgecombe <[email protected]> Cc: Peter Zijlstra (Intel) <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: [email protected] Fixes: f2fde6a5bcfcf ("KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit") Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-05RISC-V: Remove unused code from STRICT_KERNEL_RWXAtish Patra2-24/+0
This patch removes the unused functions set_kernel_text_rw/ro. Currently, it is not being invoked from anywhere and no other architecture (except arm) uses this code. Even in ARM, these functions are not invoked from anywhere currently. Fixes: d27c3c90817e ("riscv: add STRICT_KERNEL_RWX support") Signed-off-by: Atish Patra <[email protected]> Reviewed-by: Zong Li <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-05-05ARM: dts: omap4-droid4: Fix occasional lost wakeirq for uart1Tony Lindgren1-3/+7
Looks like using the UART CTS pin does not always trigger for a wake-up when the SoC is idle. This is probably because the modem first uses gpio_149 to signal the SoC that data will be sent, and the CTS will only get used later when the data transfer is starting. Let's fix the issue by configuring the gpio_149 pad as the wakeirq for UART. We have gpio_149 managed by the USB PHY for powering up the right USB mode, and after that, the gpio gets recycled as the modem wake-up pin. If needeed, the USB PHY can also later on be configured to use gpio_149 pad as the wakeirq as a shared irq. Let's also configure the missing properties for uart-has-rtscts and current-speed for the modem port while at it. We already configure the hardware flow control pins with uart1_pins pinctrl setting. Cc: [email protected] Cc: Merlijn Wajer <[email protected]> Cc: Pavel Machek <[email protected]> Cc: Sebastian Reichel <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-05-05ARM: dts: omap4-droid4: Fix flakey wlan by disabling internal pull for gpioTony Lindgren1-0/+33
The wlan on droid4 is flakey on some devices, and experiments have shown this gets fixed if we disable the internal pull for wlan gpio interrupt line. The symptoms are that the wlan connection is very slow and almost useless with lots of wlcore firmware reboot warnings in the dmesg. In addition to configuring the wlan gpio pulls, let's also configure the rest of the wlan sd pins. We have not configured those eariler as we're booting using kexec. Signed-off-by: Tony Lindgren <[email protected]>
2020-05-05KVM: s390: Remove false WARN_ON_ONCE for the PQAP instructionChristian Borntraeger1-1/+3
In LPAR we will only get an intercept for FC==3 for the PQAP instruction. Running nested under z/VM can result in other intercepts as well as ECA_APIE is an effective bit: If one hypervisor layer has turned this bit off, the end result will be that we will get intercepts for all function codes. Usually the first one will be a query like PQAP(QCI). So the WARN_ON_ONCE is not right. Let us simply remove it. Cc: Pierre Morel <[email protected]> Cc: Tony Krowiak <[email protected]> Cc: [email protected] # v5.3+ Fixes: e5282de93105 ("s390: ap: kvm: add PQAP interception for AQIC") Link: https://lore.kernel.org/kvm/[email protected] Reported-by: Qian Cai <[email protected]> Signed-off-by: Christian Borntraeger <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Cornelia Huck <[email protected]> Signed-off-by: Christian Borntraeger <[email protected]>
2020-05-04riscv: force __cpu_up_ variables to put in data sectionZong Li1-2/+2
Put __cpu_up_stack_pointer and __cpu_up_task_pointer in data section. Currently, these two variables are put in bss section, there is a potential risk that secondary harts get the uninitialized value before main hart finishing the bss clearing. In this case, all secondary harts would pass the waiting loop and enable the MMU before main hart set up the page table. This issue happens on random booting of multiple harts, which means it will manifest for BBL and OpenSBI v0.6 (or older version). In OpenSBI v0.7 (or higher version), we have HSM extension so all the secondary harts are brought-up by Linux kernel in an orderly fashion. This means we don't need this change for OpenSBI v0.7 (or higher version). Signed-off-by: Zong Li <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Reviewed-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-05-04riscv: add Linux note to vdsoAndreas Schwab2-1/+13
The Linux note in the vdso allows glibc to check the running kernel version without having to issue the uname syscall. Signed-off-by: Andreas Schwab <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-05-04riscv: set max_pfn to the PFN of the last pageVincent Chen1-1/+2
The current max_pfn equals to zero. In this case, I found it caused users cannot get some page information through /proc such as kpagecount in v5.6 kernel because of new sanity checks. The following message is displayed by stress-ng test suite with the command "stress-ng --verbose --physpage 1 -t 1" on HiFive unleashed board. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [109] 4 processors online, 4 processors configured stress-ng: info: [109] dispatching hogs: 1 physpage stress-ng: debug: [109] cache allocate: reducing cache level from L3 (too high) to L0 stress-ng: debug: [109] get_cpu_cache: invalid cache_level: 0 stress-ng: info: [109] cache allocate: using built-in defaults as no suitable cache found stress-ng: debug: [109] cache allocate: default cache size: 2048K stress-ng: debug: [109] starting stressors stress-ng: debug: [109] 1 stressor spawned stress-ng: debug: [110] stress-ng-physpage: started [110] (instance 0) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd34de000 in /proc/kpagecount, errno=0 (Success) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) ... stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) stress-ng: debug: [110] stress-ng-physpage: exited [110] (instance 0) stress-ng: debug: [109] process [110] terminated stress-ng: info: [109] successful run completed in 1.00s # After applying this patch, the kernel can pass the test. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [104] 4 processors online, 4 processors configured stress-ng: info: [104] dispatching hogs: 1 physpage stress-ng: info: [104] cache allocate: using defaults, can't determine cache details from sysfs stress-ng: debug: [104] cache allocate: default cache size: 2048K stress-ng: debug: [104] starting stressors stress-ng: debug: [104] 1 stressor spawned stress-ng: debug: [105] stress-ng-physpage: started [105] (instance 0) stress-ng: debug: [105] stress-ng-physpage: exited [105] (instance 0) stress-ng: debug: [104] process [105] terminated stress-ng: info: [104] successful run completed in 1.01s # Cc: [email protected] Signed-off-by: Vincent Chen <[email protected]> Reviewed-by: Anup Patel <[email protected]> Reviewed-by: Yash Shah <[email protected]> Tested-by: Yash Shah <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-05-04RISC-V: Remove N-extension related definesAnup Patel1-3/+0
The RISC-V N-extension is still in draft state hence remove N-extension related defines from asm/csr.h. Signed-off-by: Anup Patel <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-05-04RISC-V: Add bitmap reprensenting ISA features common across CPUsAnup Patel2-3/+102
This patch adds riscv_isa bitmap which represents Host ISA features common across all Host CPUs. The riscv_isa is not same as elf_hwcap because elf_hwcap will only have ISA features relevant for user-space apps whereas riscv_isa will have ISA features relevant to both kernel and user-space apps. One of the use-case for riscv_isa bitmap is in KVM hypervisor where we will use it to do following operations: 1. Check whether hypervisor extension is available 2. Find ISA features that need to be virtualized (e.g. floating point support, vector extension, etc.) Signed-off-by: Anup Patel <[email protected]> Signed-off-by: Atish Patra <[email protected]> Reviewed-by: Alexander Graf <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-05-04RISC-V: Export riscv_cpuid_to_hartid_mask() APIAnup Patel1-0/+2
The riscv_cpuid_to_hartid_mask() API should be exported to allow building KVM RISC-V as loadable module. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-05-04kvm: ioapic: Restrict lazy EOI update to edge-triggered interruptsPaolo Bonzini1-5/+5
Commit f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI") introduces the following infinite loop: BUG: stack guard page was hit at 000000008f595917 \ (stack is 00000000bdefe5a4..00000000ae2b06f5) kernel stack overflow (double-fault): 0000 [#1] SMP NOPTI RIP: 0010:kvm_set_irq+0x51/0x160 [kvm] Call Trace: irqfd_resampler_ack+0x32/0x90 [kvm] kvm_notify_acked_irq+0x62/0xd0 [kvm] kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm] ioapic_set_irq+0x20e/0x240 [kvm] kvm_ioapic_set_irq+0x5c/0x80 [kvm] kvm_set_irq+0xbb/0x160 [kvm] ? kvm_hv_set_sint+0x20/0x20 [kvm] irqfd_resampler_ack+0x32/0x90 [kvm] kvm_notify_acked_irq+0x62/0xd0 [kvm] kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm] ioapic_set_irq+0x20e/0x240 [kvm] kvm_ioapic_set_irq+0x5c/0x80 [kvm] kvm_set_irq+0xbb/0x160 [kvm] ? kvm_hv_set_sint+0x20/0x20 [kvm] .... The re-entrancy happens because the irq state is the OR of the interrupt state and the resamplefd state. That is, we don't want to show the state as 0 until we've had a chance to set the resamplefd. But if the interrupt has _not_ gone low then ioapic_set_irq is invoked again, causing an infinite loop. This can only happen for a level-triggered interrupt, otherwise irqfd_inject would immediately set the KVM_USERSPACE_IRQ_SOURCE_ID high and then low. Fortunately, in the case of level-triggered interrupts the VMEXIT already happens because TMR is set. Thus, fix the bug by restricting the lazy invocation of the ack notifier to edge-triggered interrupts, the only ones that need it. Tested-by: Suravee Suthikulpanit <[email protected]> Reported-by: [email protected] Suggested-by: Paolo Bonzini <[email protected]> Link: https://www.spinics.net/lists/kvm/msg213512.html Fixes: f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207489 Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-04KVM: x86: Fixes posted interrupt check for IRQs delivery modesSuravee Suthikulpanit1-2/+2
Current logic incorrectly uses the enum ioapic_irq_destination_types to check the posted interrupt destination types. However, the value was set using APIC_DM_XXX macros, which are left-shifted by 8 bits. Fixes by using the APIC_DM_FIXED and APIC_DM_LOWEST instead. Fixes: (fdcf75621375 'KVM: x86: Disable posted interrupts for non-standard IRQs delivery modes') Cc: Alexander Graf <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Message-Id: <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Tested-by: Maxim Levitsky <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-04Merge tag 'kvmarm-fixes-5.7-2' of ↵Paolo Bonzini4-15/+33
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm fixes for Linux 5.7, take #2 - Fix compilation with Clang - Correctly initialize GICv4.1 in the absence of a virtual ITS - Move SP_EL0 save/restore to the guest entry/exit code - Handle PC wrap around on 32bit guests, and narrow all 32bit registers on userspace access
2020-05-04KVM: SVM: fill in kvm_run->debug.arch.dr[67]Paolo Bonzini1-0/+2
The corresponding code was added for VMX in commit 42dbaa5a057 ("KVM: x86: Virtualize debug registers, 2008-12-15) but never for AMD. Fix this. Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-04KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warningSean Christopherson1-1/+1
Use BUG() in the impossible-to-hit default case when switching on the scope of INVEPT to squash a warning with clang 11 due to clang treating the BUG_ON() as conditional. >> arch/x86/kvm/vmx/nested.c:5246:3: warning: variable 'roots_to_free' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] BUG_ON(1); Reported-by: kbuild test robot <[email protected]> Fixes: ce8fe7b77bd8 ("KVM: nVMX: Free only the affected contexts when emulating INVEPT") Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-04arm64: dts: allwinner: a64: Remove unused SPDIF sound cardSamuel Holland1-18/+0
As of v5.7-rc2, Linux now prints the following message at boot: [ 33.848525] platform sound_spdif: deferred probe pending This is because sound_spdif is waiting on its CPU DAI &spdif to probe, but &spdif is disabled in the device tree. Exposure of the SPDIF pin is board-specific functionality, so the sound card and codec DAI belong in the individual board DTS, not the SoC DTSI. In fact, no in-tree A64 board DTS enables &spdif, so let's remove the card and DAI entirely. This reverts commit 78e071370a86473f25923e03b51cbbadacf8be0f. Acked-by: Clément Péron <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2020-05-04arm64: dts: allwinner: a64: pinetab: Fix cpvdd supply nameSamuel Holland1-1/+1
An older version of the analog codec binding referenced the headphone amplifier binding as "hpvcc". However, by the time it was merged in commit 21dd30200e3d ("ASoC: dt-bindings: sun50i-codec-analog: Add headphone amp regulator supply"), the regulator reference was renamed to "cpvdd". This board's device tree still uses the old name, which fails to work at runtime, and which causes a warning from `make dtbs_check`. Resolve both by fixing the name. Fixes: 674ef1d0a7b2 ("arm64: dts: allwinner: a64: add support for PineTab") Signed-off-by: Samuel Holland <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2020-05-04powerpc/64s/kuap: Restore AMR in system reset exceptionNicholas Piggin1-0/+1
The system reset interrupt handler locks AMR and exits with EXCEPTION_RESTORE_REGS without restoring AMR. Similarly to the soft-NMI handler, it needs to restore. Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-05-04powerpc/64/kuap: Move kuap checks out of MSR[RI]=0 regions of exit codeNicholas Piggin1-6/+8
Any kind of WARN causes a program check that will crash with unrecoverable exception if it occurs when RI is clear. Fixes: 68b34588e202 ("powerpc/64/sycall: Implement syscall entry/exit logic in C") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-05-04powerpc/64s: Fix unrecoverable SLB crashes due to preemption checkMichael Ellerman2-4/+22
Hugh reported that his trusty G5 crashed after a few hours under load with an "Unrecoverable exception 380". The crash is in interrupt_return() where we check lazy_irq_pending(), which calls get_paca() and with CONFIG_DEBUG_PREEMPT=y that goes to check_preemption_disabled() via debug_smp_processor_id(). As Nick explained on the list: Problem is MSR[RI] is cleared here, ready to do the last few things for interrupt return where we're not allowed to take any other interrupts. SLB interrupts can happen just about anywhere aside from kernel text, global variables, and stack. When that hits, it appears to be unrecoverable due to RI=0. The problematic access is in preempt_count() which is: return READ_ONCE(current_thread_info()->preempt_count); Because of THREAD_INFO_IN_TASK, current_thread_info() just points to current, so the access is to somewhere in kernel memory, but not on the stack or in .data, which means it can cause an SLB miss. If we take an SLB miss with RI=0 it is fatal. The easiest solution is to add a version of lazy_irq_pending() that doesn't do the preemption check and call it from the interrupt return path. Fixes: 68b34588e202 ("powerpc/64/sycall: Implement syscall entry/exit logic in C") Reported-by: Hugh Dickins <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-05-03x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULESJosh Poimboeuf1-4/+4
Fix the following warnings seen with !CONFIG_MODULES: arch/x86/kernel/unwind_orc.c:29:26: warning: 'cur_orc_table' defined but not used [-Wunused-variable] 29 | static struct orc_entry *cur_orc_table = __start_orc_unwind; | ^~~~~~~~~~~~~ arch/x86/kernel/unwind_orc.c:28:13: warning: 'cur_orc_ip_table' defined but not used [-Wunused-variable] 28 | static int *cur_orc_ip_table = __start_orc_unwind_ip; | ^~~~~~~~~~~~~~~~ Fixes: 153eb2223c79 ("x86/unwind/orc: Convert global variables to static") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linux Next Mailing List <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/20200428071640.psn5m7eh3zt2in4v@treble
2020-05-03Merge KUAP fix from topic/uaccess-ppc into fixesMichael Ellerman1-14/+35
Merge a KUAP fix from Nick that we're keeping in a topic branch due to interactions with other series that are headed for next.
2020-05-01Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Add -fasynchronous-unwind-tables to the vDSO CFLAGS" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: vdso: Add -fasynchronous-unwind-tables to cflags
2020-05-01x86/apic: Move TSC deadline timer debug printkThomas Gleixner1-13/+14
Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a lockdep splat due to a lock order violation between hrtimer_base::lock and console_sem, when the 'once' condition is reset via /sys/kernel/debug/clear_warn_once after boot. The initial printk cannot trigger this because that happens during boot when the local APIC timer is set up on the boot CPU. Prevent it by moving the printk to a place which is guaranteed to be only called once during boot. Mark the deadline timer check related functions and data __init while at it. Reported-by: Leon Romanovsky <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-05-01ftrace/x86: Fix trace event registration for syscalls without argumentsKonstantin Khlebnikov1-2/+3
The refactoring of SYSCALL_DEFINE0() macros removed the ABI stubs and simply defines __abi_sys_$NAME as alias of __do_sys_$NAME. As a result kallsyms_lookup() returns "__do_sys_$NAME" which does not match with the declared trace event name. See also commit 1c758a2202a6 ("tracing/x86: Update syscall trace events to handle new prefixed syscall func names"). Add __do_sys_ to the valid prefixes which are checked in arch_syscall_match_sym_name(). Fixes: d2b5de495ee9 ("x86/entry: Refactor SYSCALL_DEFINE0 macros") Signed-off-by: Konstantin Khlebnikov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Steven Rostedt (VMware) <[email protected]> Link: https://lkml.kernel.org/r/158636958997.7900.16485049455470033557.stgit@buzz
Powered by cgit, Gruvboxed by Blaster4385.