aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-10-16ARM: dts: qcom: add CM-QS600 boardMike Rapoport2-0/+60
CM-QS600 is a APQ8064 based computer on module. The details are available at http://compulab.co.il/products/computer-on-modules/cm-qs600/ Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-16ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phoneTim Bird2-1/+19
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami). This first version of the DTS supports just a serial console. Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-16ARM: dts: qcom: Add SATA support on IPQ8064/AP148Kumar Gala2-0/+41
Add SATA PHY and SATA AHCI controller nodes to device tree to enable generic ahci support on the IPQ8064/AP148 board. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-16powerpc/pci: Fix IO space breakage after of_pci_range_to_resource() changeMichael Ellerman1-1/+5
Commit 0b0b0893d49b "of/pci: Fix the conversion of IO ranges into IO resources" changed the behaviour of of_pci_range_to_resource(). Previously it simply populated the resource based on the arguments. Now it calls pci_register_io_range() and pci_address_to_pio(). These both have two implementations depending on whether PCI_IOBASE is defined, which it is not for powerpc. Further complicating matters, both routines are weak, and powerpc implements it's own version of one - pci_address_to_pio(). However powerpc's implementation depends on other initialisations which are done later in boot. The end result is incorrectly initialised IO space. Often we can get away with that, because we don't make much use of IO space. However virtio requires it, so we see eg: pci_bus 0000:00: root bus resource [io 0xffff] (bus address [0xffffffffffffffff-0xffffffffffffffff]) PCI: Cannot allocate resource region 0 of device 0000:00:01.0, will remap virtio-pci 0000:00:01.0: can't enable device: BAR 0 [io size 0x0020] not assigned The simplest fix for now is to just stop using of_pci_range_to_resource(), and open-code the original implementation, that's all we want it to do. Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-15arm: kvm: STRICT_MM_TYPECHECKS fix for user_mem_abortSteve Capper1-1/+1
Commit: b886576 ARM: KVM: user_mem_abort: support stage 2 MMIO page mapping introduced some code in user_mem_abort that failed to compile if STRICT_MM_TYPECHECKS was enabled. This patch fixes up the failing comparison. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Kim Phillips <kim.phillips@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-14Merge tag 'samsung-defconfig' of ↵Olof Johansson1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung defconfig, actually exynos_defconig updates for v3.18" from Kukjin Kim: - enable USB gadget support - enable Maxim77802 support - enable Maxim77693 and I2C GPIO drivers - enable Atmel maXTouch support - enable SBS battery support - enable Control Groups support * tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: enable USB gadget support ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers ARM: exynos_defconfig: Enable SBS battery support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable MAX77802 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-14Merge tag 'samsung-fixes' of ↵Olof Johansson5-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v3.18" from Kukjin Kim: - fix ifdef around cpu_*_do_[suspend, resume] ops to check CONFIG_ARM_CPU_SUSPEND and not CONFIG_PM_SLEEP - fix exynos_defconfig build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n - fix enabling Samsung PM debug functionality due to recently merged patches and previous merge conflicts - fix pull-up setting in sd4_width8 pin group for exynos4x12 * tag 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-14Merge tag 'fixes-for-v3.18-merge-window' of ↵Olof Johansson2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "Two omap fixes for v3.18 merge window" from Tony Lindgren: Two omap fixes for issues noticed during the merge window: - We need to enable ARM errata 430973 for omap3 - The smc91x on some early n900 boards need to be disabled for now until the dependencies to specific a bootloader version are fixed * tag 'fixes-for-v3.18-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Disable smc91x on n900 until bootloader dependency is removed ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-14ARM: sunxi_defconfig: enable CONFIG_REGULATOROlof Johansson1-0/+1
Commit 97a13e5289ba ('net: phy: mdio-sun4i: don't select REGULATOR') removed the select of REGULATOR, which means that it now has to be explicitly enabled in the defconfig or things won't work very well. In particular, this fixes a problem with SD/MMC not probing on my A31-based board. Cc: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds96-405/+410
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-10-15Merge tag 'clk-for-linus-3.18' of ↵Linus Torvalds8-8/+48
git://git.linaro.org/people/mike.turquette/linux Pull clock tree updates from Mike Turquette: "The clk tree changes for 3.18 are dominated by clock drivers. Mostly fixes and enhancements to existing drivers as well as new drivers. This tag contains a bit more arch code than I usually take due to some OMAP2+ changes. Additionally it contains the restart notifier handlers which are merged as a dependency into several trees. The PXA changes are the only messy part. Due to having a stable tree I had to revert one patch and follow up with one more fix near the tip of this tag. Some dead code is introduced but it will soon become live code after 3.18-rc1 is released as the rest of the PXA family is converted over to the common clock framework. Another trend in this tag is that multiple vendors have started to push the complexity of changing their CPU frequency into the clock driver, whereas this used to be done in CPUfreq drivers. Changes to the clk core include a generic gpio-clock type and a clk_set_phase() function added to the top-level clk.h api. Due to some confusion on the fbdev mailing list the kernel boot parameters documentation was updated to further explain the clk_ignore_unused parameter, which is often required by users of the simplefb driver. Finally some fixes to the locking around the clock debugfs stuff was done to prevent deadlocks when interacting with other subsystems." * tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits) clk: pxa clocks build system fix Revert "arm: pxa: Transition pxa27x to clk framework" clk: samsung: register restart handlers for s3c2412 and s3c2443 clk: rockchip: add restart handler clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate doc/kernel-parameters.txt: clarify clk_ignore_unused arm: pxa: Transition pxa27x to clk framework dts: add devicetree bindings for pxa27x clocks clk: add pxa27x clock drivers arm: pxa: add clock pll selection bits clk: dts: document pxa clock binding clk: add pxa clocks infrastructure clk: gpio-gate: Ensure gpiod_ APIs are prototyped clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe clk: ti: LLVMLinux: Move __init outside of type definition clk: ti: consider the fact that of_clk_get() might return an error clk: ti: dra7-atl-clock: fix a memory leak clk: ti: change clock init to use generic of_clk_init clk: hix5hd2: add I2C clocks clk: hix5hd2: add watchdog0 clocks ...
2014-10-14sparc64: Fix FPU register corruption with AES crypto offload.David S. Miller2-1/+21
The AES loops in arch/sparc/crypto/aes_glue.c use a scheme where the key material is preloaded into the FPU registers, and then we loop over and over doing the crypt operation, reusing those pre-cooked key registers. There are intervening blkcipher*() calls between the crypt operation calls. And those might perform memcpy() and thus also try to use the FPU. The sparc64 kernel FPU usage mechanism is designed to allow such recursive uses, but with a catch. There has to be a trap between the two FPU using threads of control. The mechanism works by, when the FPU is already in use by the kernel, allocating a slot for FPU saving at trap time. Then if, within the trap handler, we try to use the FPU registers, the pre-trap FPU register state is saved into the slot. Then at trap return time we notice this and restore the pre-trap FPU state. Over the long term there are various more involved ways we can make this work, but for a quick fix let's take advantage of the fact that the situation where this happens is very limited. All sparc64 chips that support the crypto instructiosn also are using the Niagara4 memcpy routine, and that routine only uses the FPU for large copies where we can't get the source aligned properly to a multiple of 8 bytes. We look to see if the FPU is already in use in this context, and if so we use the non-large copy path which only uses integer registers. Furthermore, we also limit this special logic to when we are doing kernel copy, rather than a user copy. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14dtb: Add SGMII based 1GbE node to APM X-Gene SoC device treeIyappan Subramanian2-0/+28
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14x86: bpf_jit: fix two bugs in eBPF JIT compilerAlexei Starovoitov1-6/+19
1. JIT compiler using multi-pass approach to converge to final image size, since x86 instructions are variable length. It starts with large gaps between instructions (so some jumps may use imm32 instead of imm8) and iterates until total program size is the same as in previous pass. This algorithm works only if program size is strictly decreasing. Programs that use LD_ABS insn need additional code in prologue, but it was not emitted during 1st pass, so there was a chance that 2nd pass would adjust imm32->imm8 jump offsets to the same number of bytes as increase in prologue, which may cause algorithm to erroneously decide that size converged. Fix it by always emitting largest prologue in the first pass which is detected by oldproglen==0 check. Also change error check condition 'proglen != oldproglen' to fail gracefully. 2. while staring at the code realized that 64-byte buffer may not be enough when 1st insn is large, so increase it to 128 to avoid buffer overflow (theoretical maximum size of prologue+div is 109) and add runtime check. Fixes: 622582786c9e ("net: filter: x86: internal BPF JIT") Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Tested-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZEChristoffer Dall1-0/+11
When creating or moving a memslot, make sure the IPA space is within the addressable range of the guest. Otherwise, user space can create too large a memslot and KVM would try to access potentially unallocated page table entries when inserting entries in the Stage-2 page tables. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-14arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2Christoffer Dall4-40/+249
This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-14Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-50/+78
Pull drm updates from Dave Airlie: "This is the main git pull for the drm, I pretty much froze major pulls at -rc5/6 time, and haven't had much fallout, so will probably continue doing that. Lots of changes all over, big internal header cleanup to make it clear drm features are legacy things and what are things that modern KMS drivers should be using. Also big move to use the new generic fences in all the TTM drivers. core: atomic prep work, vblank rework changes, allows immediate vblank disables major header reworking and cleanups to better delinate legacy interfaces from what KMS drivers should be using. cursor planes locking fixes ttm: move to generic fences (affects all TTM drivers) ppc64 caching fixes radeon: userptr support, uvd for old asics, reset rework for fence changes better buffer placement changes, dpm feature enablement hdmi audio support fixes intel: Cherryview work, 180 degree rotation, skylake prep work, execlist command submission full ppgtt prep work cursor improvements edid caching, vdd handling improvements nouveau: fence reworking kepler memory clock work gt21x clock work fan control improvements hdmi infoframe fixes DP audio ast: ppc64 fixes caching fix rcar: rcar-du DT support ipuv3: prep work for capture support msm: LVDS support for mdp4, new panel, gpu refactoring exynos: exynos3250 SoC support, drop bad mmap interface, mipi dsi changes, and component match support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits) drm/mst: rework payload table allocation to conform better. drm/ast: Fix HW cursor image drm/radeon/kv: add uvd/vce info to dpm debugfs output drm/radeon/ci: add uvd/vce info to dpm debugfs output drm/radeon: export reservation_object from dmabuf to ttm drm/radeon: cope with foreign fences inside the reservation object drm/radeon: cope with foreign fences inside display drm/core: use helper to check driver features drm/radeon/cik: write gfx ucode version to ucode addr reg drm/radeon/si: print full CS when we hit a packet 0 drm/radeon: remove unecessary includes drm/radeon/combios: declare legacy_connector_convert as static drm/radeon/atombios: declare connector convert tables as static drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table drm/radeon/dpm: drop clk/voltage dependency filters for BTC drm/radeon/dpm: drop clk/voltage dependency filters for CI drm/radeon/dpm: drop clk/voltage dependency filters for SI drm/radeon/dpm: drop clk/voltage dependency filters for NI drm/radeon: disable audio when we disable hdmi (v2) drm/radeon: split audio enable between eg and r600 (v2) ...
2014-10-14Merge branch 'kbuild' of ↵Linus Torvalds20-74/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - fix for handling dependencies of *-objs targets by Masahiro Yamada - lots of cleanups in the kbuild machinery, also by Masahiro - fixes for the kconfig build to use an UTF-8 capable ncurses library if possible and to build on not-so-standard installs - some more minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Do not reference *-n variables in the Makefile kbuild: simplify build, clean, modbuiltin shorthands kbuild: arm: Do not define "comma" twice kbuild: remove obj-n and lib-n handling kbuild: remove unnecessary variable initializaions kbuild: remove unnecessary "obj- := dummy.o" trick kbuild: handle C=... and M=... after entering into build directory kbuild: use $(Q) for sub-make target kbuild: fake the "Entering directory ..." message more simply kconfig/lxdialog: get ncurses CFLAGS with pkg-config kconfig: nconfig: fix multi-byte UTF handling kconfig: lxdialog: fix spelling kbuild: Make scripts executable kbuild: remove redundant clean-files from scripts/kconfig/Makefile kbuild: refactor script/kconfig/Makefile kbuild: handle the dependency of multi-objs hostprogs appropriately kbuild: handle multi-objs dependency appropriately
2014-10-14Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds11-71/+96
Merge second patch-bomb from Andrew Morton: - a few hotfixes - drivers/dma updates - MAINTAINERS updates - Quite a lot of lib/ updates - checkpatch updates - binfmt updates - autofs4 - drivers/rtc/ - various small tweaks to less used filesystems - ipc/ updates - kernel/watchdog.c changes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h> ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[] frv: remove unused declarations of __start___ex_table and __stop___ex_table kvm: ensure hard lockup detection is disabled by default kernel/watchdog.c: control hard lockup detection default staging: rtl8192u: use %*pEn to escape buffer staging: rtl8192e: use %*pEn to escape buffer staging: wlan-ng: use %*pEhp to print SN lib80211: remove unused print_ssid() wireless: hostap: proc: print properly escaped SSID wireless: ipw2x00: print SSID via %*pE wireless: libertas: print esaped string via %*pE lib/vsprintf: add %*pE[achnops] format specifier lib / string_helpers: introduce string_escape_mem() lib / string_helpers: refactoring the test suite lib / string_helpers: move documentation to c-file include/linux: remove strict_strto* definitions arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable fs: check bh blocknr earlier when searching lru ...
2014-10-14Merge branch 'for-next' of ↵Linus Torvalds59-37/+40
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu update from Greg Ungerer: "The major change is to remove the arch/m68k/platform directory. The coldfire (and other non-mmu m68k platform) code is moved to the arch/m68k level, making them consistent with the traditional m68k platforms. A couple of other minor miscellaneous fixes as well" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Fix typo 'COFNIG_MBAR' m68knommu: add missing ioport_map() and ioport_unmap() m68k/coldfire: remove second asm/mcfclk.h inclusion in m54xx.c m68knommu: fix size of address field for 5272 interrupt controller m68k: fix crufty 68000 and 68360 intro comments m68k: remove the unused arch/m68k/platform directory m68k: move non-mmu 68360 platform code m68k: move non-mmu 68000 platform code m68k: fix crufty ColdFire intro comments m68k: move coldfire platform code
2014-10-14Merge tag 'please-pull-sys_bpf' of ↵Linus Torvalds3-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 update from Tony Luck: "Wire up bpf syscall for ia64" * tag 'please-pull-sys_bpf' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable bpf syscall for ia64
2014-10-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds11-331/+153
Pull UML update from Richard Weinberger: "Besides of fixes this contains also support for CONFIG_STACKTRACE by Daniel Walter" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: net: Eliminate NULL test after alloc_bootmem um: Add support for CONFIG_STACKTRACE um: ubd: Fix for processes stuck in D state forever um: delete unnecessary bootmem struct page array um: remove csum_partial_copy_generic_i386 to clean up exception table
2014-10-14Merge branch 'for-linus' of ↵Linus Torvalds73-911/+2399
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "This patch set contains the main portion of the changes for 3.18 in regard to the s390 architecture. It is a bit bigger than usual, mainly because of a new driver and the vector extension patches. The interesting bits are: - Quite a bit of work on the tracing front. Uprobes is enabled and the ftrace code is reworked to get some of the lost performance back if CONFIG_FTRACE is enabled. - To improve boot time with CONFIG_DEBIG_PAGEALLOC, support for the IPTE range facility is added. - The rwlock code is re-factored to improve writer fairness and to be able to use the interlocked-access instructions. - The kernel part for the support of the vector extension is added. - The device driver to access the CD/DVD on the HMC is added, this will hopefully come in handy to improve the installation process. - Add support for control-unit initiated reconfiguration. - The crypto device driver is enhanced to enable the additional AP domains and to allow the new crypto hardware to be used. - Bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390/ftrace: simplify enabling/disabling of ftrace_graph_caller s390/ftrace: remove 31 bit ftrace support s390/kdump: add support for vector extension s390/disassembler: add vector instructions s390: add support for vector extension s390/zcrypt: Toleration of new crypto hardware s390/idle: consolidate idle functions and definitions s390/nohz: use a per-cpu flag for arch_needs_cpu s390/vtime: do not reset idle data on CPU hotplug s390/dasd: add support for control unit initiated reconfiguration s390/dasd: fix infinite loop during format s390/mm: make use of ipte range facility s390/setup: correct 4-level kernel page table detection s390/topology: call set_sched_topology early s390/uprobes: architecture backend for uprobes s390/uprobes: common library for kprobes and uprobes s390/rwlock: use the interlocked-access facility 1 instructions s390/rwlock: improve writer fairness s390/rwlock: remove interrupt-enabling rwlock variant. s390/mm: remove change bit override support ...
2014-10-14Merge branches 'x86-ras-for-linus', 'x86-uv-for-linus' and ↵Linus Torvalds3-9/+9
'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 ras, uv and vdso fixlets from Ingo Molnar: "ras: tone down a kernel message to only occur during initial bootup, not during suspend/resume cycles. uv: a cleanup commit vdso: a fix to error checking" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Avoid showing repetitive message from intel_init_thermal() * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/uv: Remove unnecessary #ifdef * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix vdso2c's special_pages[] error checking
2014-10-14Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds6-6/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc smaller fixes that missed the v3.17 cycle" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Add arch/x86/purgatory/ make generated files to gitignore x86: Fix section conflict for numachip x86: Reject x32 executables if x32 ABI not supported x86_64, entry: Filter RFLAGS.NT on entry from userspace x86, boot, kaslr: Fix nuisance warning on 32-bit builds
2014-10-14Merge branch 'x86-seccomp-for-linus' of ↵Linus Torvalds9-67/+184
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 seccomp changes from Ingo Molnar: "This tree includes x86 seccomp filter speedups and related preparatory work, which touches core seccomp facilities as well. The main idea is to split seccomp into two phases, to be able to enter a simple fast path for syscalls with ptrace side effects. There's no substantial user-visible (and ABI) effects expected from this, except a change in how we emit a better audit record for SECCOMP_RET_TRACE events" * 'x86-seccomp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64, entry: Use split-phase syscall_trace_enter for 64-bit syscalls x86_64, entry: Treat regs->ax the same in fastpath and slowpath syscalls x86: Split syscall_trace_enter into two phases x86, entry: Only call user_exit if TIF_NOHZ x86, x32, audit: Fix x32's AUDIT_ARCH wrt audit seccomp: Document two-phase seccomp and arch-provided seccomp_data seccomp: Allow arch code to provide seccomp_data seccomp: Refactor the filter callback and the API seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
2014-10-14Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds6-10/+186
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes in this tree are: - fix and update Intel Quark [Galileo] SoC platform support - update IOSF chipset side band interface and make it available via debugfs - enable HPETs on Soekris net6501 and other e6xx based systems" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add cpu_detect_cache_sizes to init_intel() add Quark legacy_cache() x86: Quark: Comment setup_arch() to document TLB/PGE bug x86/intel/quark: Switch off CR4.PGE so TLB flush uses CR3 instead x86/platform/intel/iosf: Add debugfs config option for IOSF x86/platform/intel/iosf: Add better description of IOSF driver in config x86/platform/intel/iosf: Add Braswell PCI ID x86/platform/pmc_atom: Fix warning when CONFIG_DEBUG_FS=n x86: HPET force enable for e6xx based systems x86/iosf: Add debugfs support x86/iosf: Add Kconfig prompt for IOSF_MBI selection
2014-10-14Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds8-77/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "This tree includes the following changes: - fix memory hotplug - fix hibernation bootup memory layout assumptions - fix hyperv numa guest kernel messages - remove dead code - update documentation" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Update memory map description to list hypervisor-reserved area x86/mm, hibernate: Do not assume the first e820 area to be RAM x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data() x86/mm/hotplug: Modify PGD entry when removing memory x86/mm/hotplug: Pass sync_global_pgds() a correct argument in remove_pagetable() x86: Remove set_pmd_pfn
2014-10-14Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds4-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loading updates from Ingo Molnar: "Misc smaller cleanups" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, intel: Fix total_size computation x86, microcode, intel: Rename apply_microcode and declare it static x86, microcode, intel: Fix typos x86, microcode, intel: Add missing static declarations x86, microcode, amd: Fix missing static declaration
2014-10-14Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds6-19/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 FPU updates from Ingo Molnar: "x86 FPU handling fixes, cleanups and enhancements from Oleg. The signal handling race fix and the __restore_xstate_sig() preemption fix for eager-mode is marked for -stable as well" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: copy_thread: Don't nullify ->ptrace_bps twice x86, fpu: Shift "fpu_counter = 0" from copy_thread() to arch_dup_task_struct() x86, fpu: copy_process: Sanitize fpu->last_cpu initialization x86, fpu: copy_process: Avoid fpu_alloc/copy if !used_math() x86, fpu: Change __thread_fpu_begin() to use use_eager_fpu() x86, fpu: __restore_xstate_sig()->math_state_restore() needs preempt_disable() x86, fpu: shift drop_init_fpu() from save_xstate_sig() to handle_signal()
2014-10-14Merge branch 'x86-cpufeature-for-linus' of ↵Linus Torvalds6-29/+74
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpufeature updates from Ingo Molnar: "This tree includes the following changes: - Introduce DISABLED_MASK to list disabled CPU features, to simplify CPU feature handling and avoid excessive #ifdefs - Remove the lightly used cpu_has_pae() primitive" * 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add more disabled features x86: Introduce disabled-features x86: Axe the lightly-used cpu_has_pae
2014-10-14ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[]Geert Uytterhoeven1-1/+1
They're already provided by <asm/sections.h>. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14frv: remove unused declarations of __start___ex_table and __stop___ex_tableGeert Uytterhoeven1-2/+0
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14kvm: ensure hard lockup detection is disabled by defaultUlrich Obergfell1-0/+8
Use watchdog_enable_hardlockup_detector() to set hard lockup detection's default value to false. It's risky to run this detection in a guest, as false positives are easy to trigger, especially if the host is overcommitted. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggableXishi Qiu1-44/+45
If all the nodes are marked hotpluggable, alloc node data will fail. Because __next_mem_range_rev() will skip the hotpluggable memory regions. numa_clear_kernel_node_hotplug() is called after alloc node data. numa_init() ... ret = init_func(); // this will mark hotpluggable flag from SRAT ... memblock_set_bottom_up(false); ... ret = numa_register_memblks(&numa_meminfo); // this will alloc node data(pglist_data) ... numa_clear_kernel_node_hotplug(); // in case all the nodes are hotpluggable ... numa_register_memblks() setup_node_data() memblock_find_in_range_node() __memblock_find_range_top_down() for_each_mem_range_rev() __next_mem_range_rev() This patch moves numa_clear_kernel_node_hotplug() into numa_register_memblks(), clear kernel node hotpluggable flag before alloc node data, then alloc node data won't fail even all the nodes are hotpluggable. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Dave Jones <davej@redhat.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14ARM: replace strnicmp with strncasecmpRasmus Villemoes1-6/+6
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14arch/x86/kernel/cpu/common.c: fix unused symbol warningAndrew Morton1-1/+3
x86_64 allnoconfig: arch/x86/kernel/cpu/common.c:968: warning: 'syscall32_cpu_init' defined but not used Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14x86: use optimized ioresource lookup in ioremap functionMike Travis1-4/+16
Use the optimized ioresource lookup, "region_is_ram", for the ioremap function. If the region is not found, it falls back to the "page_is_ram" function. If it is found and it is RAM, then the usual warning message is issued, and the ioremap operation is aborted. Otherwise, the ioremap operation continues. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Alex Thorlton <athorlton@sgi.com> Reviewed-by: Cliff Wickman <cpw@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Mark Salter <msalter@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14kexec-bzimage64: fix sparse warningsVivek Goyal1-7/+8
David Howells brought to my attention the mails generated by kbuild test bot and following sparse warnings were present. This patch fixes these warnings. arch/x86/kernel/kexec-bzimage64.c:270:5: warning: symbol 'bzImage64_probe' was not declared. Should it be static? arch/x86/kernel/kexec-bzimage64.c:328:6: warning: symbol 'bzImage64_load' was not declared. Should it be static? arch/x86/kernel/kexec-bzimage64.c:517:5: warning: symbol 'bzImage64_cleanup' was not declared. Should it be static? arch/x86/kernel/kexec-bzimage64.c:531:5: warning: symbol 'bzImage64_verify_sig' was not declared. Should it be static? arch/x86/kernel/kexec-bzimage64.c:546:23: warning: symbol 'kexec_bzImage64_ops' was not declared. Should it be static? Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14kexec: check if crashk_res_low exists when exclude it from crash mem rangesBaoquan He1-4/+6
Add a check if crashk_res_low exists just like GART region does. If crashk_res_low doesn't exist, calling exclude_mem_range is unnecessary. Meanwhile, since crashk_res_low has been initialized at definition, it's safe just use "if (crashk_low_res.end)" to check if it's exist. And this can make it consistent with other places of check. Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14arch/x86/purgatory/Makefile: try to use automatic variable in kexec ↵Baoquan He1-1/+2
purgatory makefile Make the Makefile of kexec purgatory be consistent with others in linux src tree, and make it look generic and simple. Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14ARM: dts: fix wrong compatible string of Exynos3250 RTC dt nodeChanwoo Choi1-1/+1
Fix wrong compatible string of Exynos3250 RTC (Real-Time Clock) dt node. The RTC of Exynos3250 must need additional source clock (XrtcXTI). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13um: net: Eliminate NULL test after alloc_bootmemHimangi Saraogi1-4/+0
alloc_bootmem and related functions never return NULL. Thus a NULL test or memset after calls to these functions is unnecessary. The following Coccinelle semantic patch was used for making the change: @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) ... when != E - if (E == NULL) S Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-10-13um: Add support for CONFIG_STACKTRACEDaniel Walter5-53/+142
Add stacktrace support for User Mode Linux Signed-off-by: Daniel Walter <dwalter@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-10-13um: ubd: Fix for processes stuck in D state foreverThorsten Knabe1-2/+3
Starting with Linux 3.12 processes get stuck in D state forever in UserModeLinux under sync heavy workloads. This bug was introduced by commit 805f11a0d5 (um: ubd: Add REQ_FLUSH suppport). Fix bug by adding a check if FLUSH request was successfully submitted to the I/O thread and keeping the FLUSH request on the request queue on submission failures. Fixes: 805f11a0d5 (um: ubd: Add REQ_FLUSH suppport) Signed-off-by: Thorsten Knabe <linux@thorsten-knabe.de> Cc: stable@kernel.org # >= 3.12 Signed-off-by: Richard Weinberger <richard@nod.at>
2014-10-13Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds1-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu offlining patch from Ingo Molnar: "This tree includes a single commit that speeds up x86 suspend/resume by replacing a naive 100msec sleep based polling loop with proper completion notification. This gives some real suspend/resume benefit on servers with larger core counts" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smpboot: Speed up suspend/resume by avoiding 100ms sleep for CPU offline during S3
2014-10-13Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds2-17/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Three small cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tty/serial/8250: Clean up the asm/serial.h include file a bit x86/tty/serial/8250: Resolve missing-field-initializers warnings x86: Remove obsolete comment in uapi/e820.h
2014-10-13Merge branch 'x86-build-for-linus' of ↵Linus Torvalds1-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build update from Ingo Molnar: "A single commit that simplifies the no-FPU-ops build options" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kbuild: Eliminate duplicate command line options
2014-10-13Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds4-80/+51
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 bootup updates from Ingo Molnar: "The changes in this cycle were: - Fix rare SMP-boot hang (mostly in virtual environments) - Fix build warning with certain (rare) toolchains" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/relocs: Make per_cpu_load_addr static x86/smpboot: Initialize secondary CPU only if master CPU will wait for it
2014-10-13Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds7-68/+61
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The changes in this cycle were: - Speed up the x86 __preempt_schedule() implementation - Fix/improve low level asm code debug info annotations" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Unwind-annotate thunk_32.S x86: Improve cmpxchg8b_emu.S x86: Improve cmpxchg16b_emu.S x86/lib/Makefile: Remove the unnecessary "+= thunk_64.o" x86: Speed up ___preempt_schedule*() by using THUNK helpers
Powered by cgit, Gruvboxed by Blaster4385.