| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Firefly PX30 Core SoM with JD4 baseboard, NanoPi 2S Plus,
Taishan Pi RK3566, ODROID-M1S,NanoPC-T6 LTS, Cool Pi CM5 GenBook
Big number of improvements for NanoPC-T6,QNAP-TS433 and FastRhino R66S
With recent dtc changes making it into linux-next the Wolfvision Visualizer
overlay finally compiles without warnings. And smaller number of
improvements on a number of Radxa boards.
Interesting new additions on a soc-level are the hardware RNG on rk3568,
an additional sdmmc-controller (not supported before) on rk3328 and
v4l video codecs for the rk3588 (decoding of h.264 amongst others).
* tag 'v6.12-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (62 commits)
arm64: dts: rockchip: drop unsupported regulator-property from NanoPC-T6
arm64: dts: rockchip: drop unsupported regulator property from NanoPC-T6
arm64: dts: rockchip: use correct fcs,suspend-voltage-selector on NanoPC-T6
arm64: dts: rockchip: add Mask Rom key on NanoPC-T6
arm64: dts: rockchip: enable USB-C on NanoPC-T6
arm64: dts: rockchip: enable GPU on NanoPC-T6
arm64: dts: rockchip: add IR-receiver to NanoPC-T6
arm64: dts: rockchip: add SPI flash on NanoPC-T6
arm64: dts: rockchip: add NanoPC-T6 LTS
arm64: dts: rockchip: move NanoPC-T6 parts to DTS
arm64: dts: rockchip: prepare NanoPC-T6 for LTS board
dt-bindings: arm: rockchip: Add NanoPC-T6 LTS
arm64: dts: rockchip: disable display subsystem only for Radxa E25
arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A
arm64: dts: rockchip: remove unnecessary properties for Radxa ROCK 5A
arm64: dts: rockchip: add dts for LCKFB Taishan Pi RK3566
dt-bindings: arm: rockchip: Add LCKFB Taishan Pi RK3566
dt-bindings: vendor-prefixes: Add Shenzhen JLC Technology Group LCKFB
arm64: dts: rockchip: Add Hardkernel ODROID-M1S
dt-bindings: arm: rockchip: Add Hardkernel ODROID-M1S
...
Link: https://lore.kernel.org/r/6322098.17fYzF0512@diego
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.12
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
* tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: Fix RTT clock
ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema
ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91: align LED node name with bindings
ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi
ARM: dts: microchip: at91-sama7g5ek: add EEPROMs
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.12-rc1
This contains a slew of cleanups and consolidation changes for several
Orin boards and also fix some minor issues and enable more features on
the Jetson TX1.
* tag 'tegra-for-6.12-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add thermal nodes to AGX Orin SKU8
arm64: tegra: Move BPMP nodes to AGX Orin module
arm64: tegra: Move padctl supply nodes to AGX Orin module
arm64: tegra: Move AGX Orin nodes to correct location
arm64: tegra: Combine IGX Orin board files
arm64: tegra: Combine AGX Orin board files
arm64: tegra: Add common nodes to AGX Orin module
arm64: tegra: Wire up WiFi on Jetson TX1 module
arm64: tegra: Wire up Bluetooth on Jetson TX1 module
arm64: tegra: Wire up power sensors on Jetson TX1 DevKit
arm64: tegra: Add p3767 PCIe C4 EP details
arm64: tegra: Add Tegra234 PCIe C4 EP definition
arm64: tegra: Add wp-gpio for P2597's external card slot
arm64: tegra: Fix gpio for P2597 vmmc regulator
arm64: tegra: Correct location of power-sensors for IGX Orin
arm64: tegra: enable same UARTs for Orin NX/Nano
arm64: tegra: Add DMA properties for Tegra234 UARTA
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.12-rc1
These patches add a bunch more features for the TF701T board and wire up
the front panel LEDs on TrimSlice.
* tag 'tegra-for-6.12-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Wire up two front panel LEDs on TrimSlice
ARM: tegra: tf701t: Configure USB
ARM: tegra: tf701t: Use dedicated backlight regulator
ARM: tegra: tf701t: Re-group GPIO keys
ARM: tegra: tf701t: Bind WIFI SDIO and EMMC
ARM: tegra: tf701t: Complete sound bindings
ARM: tegra: tf701t: Adjust sensors nodes
ARM: tegra: tf701t: Add Bluetooth node
ARM: tegra: tf701t: Add HDMI bindings
ARM: tegra: tf701t: Correct and complete PMIC and PMC bindings
ARM: tegra: tf701t: Bind VDE device
ARM: tegra: tf701t: Use unimomentary pinmux setup
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 Juno/FVP update for v6.12
Just a single update adding stdout-path to the fast models(FVP and
Foundation) which eliminates the need to specify any platform-specific
kernel command line parameters to get working earlycon or console.
* tag 'juno-update-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fvp: Set stdout-path to serial0 in the chosen node
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.12
1. Exynos7885: Correct amount of RAM on Samsung Galaxy A8.
2. ExynosAutov9: Add new DPUM clock controller and DPUM IOMMU (SysMMU).
3. ExynosAutov920: Add initial (incomplete) clock controllers: TOP and
PERIC0 controllers.
4. Google GS101: Add reboot and poweroff support.
5. Add binding headers with clock IDs for several devices, used by the
DTS.
* tag 'samsung-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynosautov920: add initial CMU clock nodes in ExynosAuto v920
dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings
arm64: dts: exynosautov9: Add dpum SysMMU
arm64: dts: exynosautov9: add dpum clock DT nodes
dt-bindings: clock: exynosautov9: add dpum clock
dt-bindings: clock: exynos7885: Add indices for USB clocks
dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices
dt-bindings: clock: exynos7885: Fix duplicated binding
dt-bindings: clock: exynos850: Add TMU clock
arm64: dts: exynos: gs101: add syscon-poweroff and syscon-reboot nodes
arm64: dts: exynos: exynos7885-jackpotlte: Correct RAM amount to 4GB
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12
- Add support for sound, push switches, and GP LEDs on the Gray Hawk
Single development board,
- Add missing iommus properties on R-Car Gen3/Gen4 and RZ/G2 SoCs,
- Add PWM support for the R-Car V4M SoC,
- Improve Ethernet descriptions on the RZ/G2L, RZ/G2LC, and RZ/G2UL
SMARC SoMs,
- Add DMAC support for the RZ/G3S SoC,
- Add CAN-FD support for the R-Car V4M SoC and the Gray Hawk Single
development board.
* tag 'renesas-dts-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
arm64: dts: renesas: gray-hawk-single: Add CAN-FD support
arm64: dts: renesas: r8a779h0: Add CAN-FD node
arm64: dts: renesas: r9a08g045: Add DMAC node
arm64: dts: renesas: rzg2ul: Set Ethernet PVDD to 1.8V
arm64: dts: renesas: rzg2lc: Set Ethernet PVDD to 1.8V
arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V
arm64: dts: renesas: rzg2ul: Enable Ethernet TXC output
arm64: dts: renesas: rzg2lc: Enable Ethernet TXC output
arm64: dts: renesas: rzg2l: Enable Ethernet TXC output
arm64: dts: renesas: r8a779h0: Add PWM device nodes
arm64: dts: renesas: gray-hawk-single: Add GP LEDs
arm64: dts: renesas: gray-hawk-single: Add push switches
arm64: dts: renesas: r8a779h0: Add missing iommus properties
arm64: dts: renesas: r8a779g0: Add missing iommus properties
arm64: dts: renesas: r8a779a0: Add missing iommus properties
arm64: dts: renesas: r8a77980: Add missing iommus properties
arm64: dts: renesas: r8a77970: Add missing iommus property
arm64: dts: renesas: r8a77965: Add missing iommus properties
arm64: dts: renesas: r8a77961: Add missing iommus properties
arm64: dts: renesas: r8a77960: Add missing iommus properties
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
T-HEAD Devicetrees for v6.12
Add SPI controller node to th1520.dtsi and enable spi0 on the BeagleV
Ahead and LicheePi 4A.
The TH1520 AP_SYS clock driver landed in v6.11 so convert multiple
peripherals like mmc and uart from fixed clocks to the clock controller.
All of these patches have been successfully tested in the latest
linux-next releases.
Signed-off-by: Drew Fustini <[email protected]>
* tag 'thead-dt-for-v6.12' of https://github.com/pdp7/linux:
riscv: dts: thead: change TH1520 SPI node to use clock controller
riscv: dts: thead: add clock to TH1520 gpio nodes
riscv: dts: thead: update TH1520 dma and timer nodes to use clock controller
riscv: dts: thead: change TH1520 mmc nodes to use clock controller
riscv: dts: thead: change TH1520 uart nodes to use clock controller
riscv: dts: thead: Add TH1520 AP_SUBSYS clock controller
riscv: dts: thead: add basic spi node
Link: https://lore.kernel.org/r/ZsWs8QiVruMXjzPc@x1
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
arm64: Default configuration changes for v6.12-rc1
This contains a single change to enable the Tegra194 PCIe endpoint
driver by default.
* tag 'tegra-for-6.12-arm64-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra194 PCIe Endpoint
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.12
- Enable support for AK4619 codecs and Renesas R-Car Ethernet-TSN
controllers in the ARM64 defconfig,
- Enable slab hardening and kmalloc buckets in the Renesas ARM
defconfig.
* tag 'renesas-arm-defconfig-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R-Car Ethernet-TSN support
ARM: shmobile: defconfig: Enable slab hardening and kmalloc buckets
arm64: defconfig: Enable AK4619 codec support
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig
Microchip AT91 defconfig updates for v6.12
It contains:
- SAM9X7 SoC defconfig flag enablement
* tag 'at91-defconfig-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: enable config flags for sam9x7 SoC family
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
IFM references
There's an erratum that prevents the PAT from working correctly:
https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/pentium-dual-core-specification-update.pdf
# Document 316515 Version 010
The kernel currently disables PAT support on those CPUs, but it
does it with some magic numbers.
Replace the magic numbers with the new "IFM" macros.
Make the check refer to the last affected CPU (INTEL_CORE_YONAH)
rather than the first fixed one. This makes it easier to find the
documentation of the erratum since Intel documents where it is
broken and not where it is fixed.
I don't think the Pentium Pro (or Pentium II) is actually affected.
But the old check included them, so it can't hurt to keep doing the
same. I'm also not completely sure about the "Pentium M" CPUs
(models 0x9 and 0xd). But, again, they were included in in the
old checks and were close Pentium III derivatives, so are likely
affected.
While we're at it, revise the comment referring to the erratum name
and making sure it is a quote of the language from the actual errata
doc. That should make it easier to find in the future when the URL
inevitably changes.
Why bother with this in the first place? It actually gets rid of one
of the very few remaining direct references to c->x86{,_model}.
No change in functionality intended.
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Len Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The saif[01] nodes are specific to other group of the imx287
based devices, so need to be moved to different devices description file.
Leaving them here causes issues with next revision of XEA device.
Signed-off-by: Lukasz Majewski <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Due to some operational problems (HW) the maximal speed of the SPI
frequency for flash memory has been reduced by half.
Signed-off-by: Lukasz Majewski <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The SPI-NOR memory layout has evolved during time lifetime of the
device - for example special partitions to keep track of booted devices
for A/B booting scheme were added.
Signed-off-by: Lukasz Majewski <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming:
imx6ul-kontron-bl.dtb: pinctrl@20e0000: 'usbotg1' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Drop an empty pin configuration node placeholder, because bindings
require 'fsl,pins' property:
imx6ul-tx6ul-0010.dtb: pinctrl@20e0000: hoggrp: 'fsl,pins' is a required property
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
According to fsl,saif.yaml, fsl,saif-master is a phandle to the master
SAIF.
Change it accordingly, to fix the following dt-schema warnings:
saif@80042000: fsl,saif-master: True is not of type 'array'
saif@80042000: Unevaluated properties are not allowed ('fsl,saif-master' was unexpected)
Signed-off-by: Fabio Estevam <[email protected]>
Acked-By: Lothar Waßmann <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: [email protected]
Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Parthiban Nallathambi <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: [email protected]
Fixes: a58e4e608bc8 ("ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
According to simple-bus.yaml, apbh and apbx are not valid bus names.
Rename them to apbh-bus and apbx-bus to fix the following dt-schema
warnings:
'apbh@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
'apbx@80040000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Lukasz Majewski <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
The usage of the R-Car V4M CSISP bindings where merged before the
bindings where approved. At that time the family fallback compatible
where not part of the bindings, add them.
Fixes: 2bb78d9fb7c9 ("arm64: dts: renesas: r8a779h0: Add video capture nodes")
Signed-off-by: Niklas Söderlund <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
To make it easier to support new R-Car Gen4 SoCs add a family fallback
compatible similar to what was done for VIN on R-Car Gen4.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V3U for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
To make it easier to support new R-Car Gen4 SoCs add a family fallback
compatible similar to what was done for VIN on R-Car Gen4.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V4H for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
The usage of the R-Car V4M VIN bindings where merged before the bindings
where approved. At that time the family fallback compatible was not
part of the bindings, add it.
Fixes: 2bb78d9fb7c9 ("arm64: dts: renesas: r8a779h0: Add video capture nodes")
Signed-off-by: Niklas Söderlund <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
To make it easier to support new R-Car Gen4 SoCs a family fallback
compatible similar to what is used for R-Car Gen2 has been added to the
VIN bindings. Add this fallback to the R-Car V3U DTSI.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V3U for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
To make it easier to support new R-Car Gen4 SoCs a family fallback
compatible similar to what is used for R-Car Gen2 has been added to the
VIN bindings. Add this fallback to the R-Car V4H DTSI.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V4H for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Commit ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by
zone_dma_limit") optimistically assumed that device-tree dma-ranges
property describes the system DMA limits. That assumption ignores DMA
limits of individual devices that are not encoded in device tree.
Commit 833bd284a45 ("arm64: mm: fix DMA zone when dma-ranges is
missing") fixed part of the problem for platforms that do not provide
dma-ranges at all. However platforms like SM8550-HDK provide DMA bus
limit, but have devices with stronger DMA limits.
of_dma_get_max_cpu_address() does not take device limitations into
account.
These platforms implicitly rely on DMA zone in low 32-bit RAM area.
Until we find a better way to figure out the optimal DMA zone range,
restore the low RAM DMA zone we had before commit ba0fb44aed47.
Fixes: ba0fb44aed47 ("dma-mapping: replace zone_dma_bits by zone_dma_limit")
Closes: https://lore.kernel.org/r/[email protected]
Reported-by: Neil Armstrong <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Suggested-by: Robin Murphy <[email protected]>
Signed-off-by: Baruch Siach <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on SM8550-HDK
Tested-by: Marek Szyprowski <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Until recently, KVM_CAP_READONLY_MEM was unconditionally supported on
x86, but this is no longer the case for SEV-ES and SEV-SNP VMs.
When KVM_CHECK_EXTENSION is invoked on a VM, only advertise
KVM_CAP_READONLY_MEM when it's actually supported.
Fixes: 66155de93bcf ("KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)")
Cc: Sean Christopherson <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Michael Roth <[email protected]>
Signed-off-by: Tom Dohrmann <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This fixes a W=1 build error:
arch/arm/mach-dove/common.c: In function ‘dove_clk_init’:
arch/arm/mach-dove/common.c:85:40: error: variable ‘gephy’ set but not used [-Werror=unused-but-set-variable]
85 | struct clk *xor0, *xor1, *ge, *gephy;
| ^~~~~
Fixes: 521674718af0 ("ARM: dove: add clock gating control")
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
|
|
Kernel now supports chained power-off handlers. Use
register_platform_power_off() that registers a platform level power-off
handler. Legacy pm_power_off() will be removed once all drivers and archs
are converted to the new sys-off API.
Signed-off-by: Andrew Davis <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
|
|
For each memory region the first 10K are reserved for DDR training. Emit
a warning if the area happens to be smaller than these 10K. This should
not happen, but if it does this message simplifies diagnosing the
problem.
This fixes a W=1 compiler error:
arch/arm/mach-mvebu/board-v7.c: In function ‘mvebu_scan_mem’:
arch/arm/mach-mvebu/board-v7.c:84:27: error: variable ‘size’ set but not used [-Werror=unused-but-set-variable]
84 | u64 base, size;
| ^~~~
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
|
|
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_DIR_IN instead of GPIOF_IN, shrink the legacy definitions
by killing those GPIOF_DIR_* completely.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Alexander Sverdlin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy
definitions by killing those GPIOF_INIT_* completely.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Alexander Sverdlin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Enable WDT1 watchdog on RZ/V2H EVK platform.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Enable OSTM0-OSTM7, RIIC{0,1,2,3,6,7,8}, and SDHI1 (available on the SD2
connector) on the RZ/V2H EVK platform.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Add WDT0-WDT3 nodes to RZ/V2H(P) ("R9A09G057") SoC DTSI.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Add SDHI0-SDHI2 nodes to RZ/V2H(P) ("R9A09G057") SoC DTSI.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Add RIIC0-RIIC8 nodes to RZ/V2H(P) ("R9A09G057") SoC DTSI.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Add OSTM0-OSTM7 nodes to RZ/V2H(P) ("R9A09G057") SoC DTSI.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Add initial DTS for RZ/V2H EVK board (based on R9A09G057H44), adding
the below support:
- Memory
- Clock inputs
- PINCTRL
- SCIF
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Add initial SoC DTSI for Renesas RZ/V2H(P) ("R9A09G057") SoC, below are
the list of blocks added:
- EXT CLKs
- 4X CA55
- SCIF
- PFC
- CPG
- SYS
- GIC
- ARMv8 Timer
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Add the missing clocks in the sound card nodes according to the
AXG and GX sound card bindings changes.
It solves the following errors:
sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
from schema $id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml#
sound: 'anyOf' conditional failed, one must be fixed:
'clocks' is a required property
'#clock-cells' is a required property
from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240828-topic-amlogic-upstream-bindings-fixes-audio-snd-card-v2-3-58159abf0779@linaro.org
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Fix warning when use W=1 to build dtb, as following error:
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:65.7-76.4: Warning
(unit_address_vs_reg): /sram: node has a reg or ranges property,
but no unit name
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning
(unit_address_vs_reg): /soc/bus@fe000000/pinctrl@4000: node has a
unit name, but no reg or ranges property
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning
(simple_bus_reg): /soc/bus@fe000000/pinctrl@4000: missing or empty
reg/ranges property
arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts:205.9-245.4:
Warning (avoid_unnecessary_addr_size): /soc/bus@fe000000/spi@56000
/nand@0: unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Fixes: d4bd8f3023b6 ("arm64: dts: amlogic: add C3 AW419 board")
Fixes: 520b792e8317 ("arm64: dts: amlogic: add some device nodes for C3")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Xianwei Zhao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Machine code is leaking OF node reference from of_find_matching_node()
in realview_smp_prepare_cpus().
Fixes: 5420b4b15617 ("ARM: realview: add an DT SMP boot method")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Fix the following 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/mm/testmmiotrace.o
Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-2-7094088076c8@quicinc.com
Signed-off-by: Jeff Johnson <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Alistar Popple <[email protected]>
Cc: Andrew Jeffery <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eddie James <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jeremy Kerr <[email protected]>
Cc: Joel Stanley <[email protected]>
Cc: Karol Herbst <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Naveen N Rao <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Nouveau <[email protected]>
Cc: Pekka Paalanen <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Russell King <[email protected]>
Cc: Steven Rostedt (Google) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "treewide: add missing MODULE_DESCRIPTION() macros".
Since commit 1fffe7a34c89 ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning when built with make W=1.
Recently, multiple developers have been eradicating these warnings
treewide, and I personally submitted almost 300 patches over the past few
months. Almost all of my patches landed by 6.11-rc1, either by being
merged in a 6.10-rc or by being merged in the 6.11 merge window. However,
a few of my patches did not land.
This patch (of 5):
With ARCH=arm and CONFIG_KERNEL_MODE_NEON=y, make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/arm/lib/xor-neon.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-0-7094088076c8@quicinc.com
Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-1-7094088076c8@quicinc.com
Signed-off-by: Jeff Johnson <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Alistar Popple <[email protected]>
Cc: Andrew Jeffery <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eddie James <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jeremy Kerr <[email protected]>
Cc: Joel Stanley <[email protected]>
Cc: Karol Herbst <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Michael Ellerman <[email protected]> (powerpc)
Cc: Naveen N Rao <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Nouveau <[email protected]>
Cc: Pekka Paalanen <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Russell King <[email protected]>
Cc: Steven Rostedt (Google) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
XZ_EXTERN was used to make internal functions static in the preboot code.
However, in other decompressors this hasn't been done. On x86-64, this
makes no difference to the kernel image size.
Omit XZ_EXTERN and let some of the internal functions be extern in the
preboot code. Omitting XZ_EXTERN from include/linux/xz.h fixes warnings
in "make htmldocs" and makes the intradocument links to xz_dec functions
work in Documentation/staging/xz.rst. The alternative would have been to
add "XZ_EXTERN" to c_id_attributes in Documentation/conf.py but omitting
XZ_EXTERN seemed cleaner.
Link: https://lore.kernel.org/lkml/20240723205437.3c0664b0@kaneli/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Lasse Collin <[email protected]>
Tested-by: Michael Ellerman <[email protected]> (powerpc)
Cc: Jonathan Corbet <[email protected]>
Cc: Sam James <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Emil Renner Berthing <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Joel Stanley <[email protected]>
Cc: Jubin Zhong <[email protected]>
Cc: Jules Maselbas <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Rui Li <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|