aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2024-09-04arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and ↵Tarang Raval3-0/+371
VAR-SOM-MX8MP SoM Adds the DTSI file for the Variscite VAR-SOM-MX8MP System on Module which is delivered with the Variscite Symphony Evaluation Kit. Initial support includes: - Serial console - eMMC - SD card Signed-off-by: Tarang Raval <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8mm-var-som: drop unused top-level compatibleKrzysztof Kozlowski1-1/+0
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone without motherboard, so drop the top-level compatible field to avoid any false impression that such usage is possible. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: ls1088ardb: add new RTC PCF2131 supportJoy Zou1-0/+7
Add RTC PCF2131 node for new ls1088ardb board.. Signed-off-by: Joy Zou <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Cleanup commentsJoão Paulo Gonçalves1-4/+0
Remove unnecessary comments. The Colibri-iMX8X doesn't support FlexCAN, and the GPU is already enabled in the SOC dtsi. Signed-off-by: João Paulo Gonçalves <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Add 50mhz clock for ethPhilippe Schenker1-0/+15
Change enet0_lpcg to get the clock value needed in Colibri-iMX8X for 100mbps ethernet. Signed-off-by: Philippe Schenker <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Add adma_pwmJoão Paulo Gonçalves4-0/+21
Add adma_pwm node for Colibri-iMX8X carrier boards. Signed-off-by: João Paulo Gonçalves <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Add vpu supportJoão Paulo Gonçalves1-1/+27
Enable VPU on Colibri-iMX8X. Signed-off-by: João Paulo Gonçalves <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Add USB3803 HUBFrancesco Dolcini1-0/+20
Add USB3803 HUB, this is required for Bluetooth and USB functionalities. Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Add PMIC thermal zoneFrancesco Dolcini2-2/+43
Add PMIC thermal zones. Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Add sound cardJoão Paulo Gonçalves1-1/+46
Add audio support for Colibri-iMX8X sound card. Signed-off-by: João Paulo Gonçalves <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Add fxl6408 gpio expanderFrancesco Dolcini1-0/+15
Add fxl6408 gpio expander, this is required for Wi-Fi, Bluetooth and USB functionalities. Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Add analog inputsJoão Paulo Gonçalves4-1/+28
Add adc nodes for analog inputs support for all Colibri-iMX8X carrier boards. Signed-off-by: João Paulo Gonçalves <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: colibri-imx8x: Add usb supportEmanuele Ghidoli4-4/+111
Add USB HOST and OTG support to Colibri-iMX8X carrier boards. Signed-off-by: Emanuele Ghidoli <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodesFrank Li1-0/+87
Enable usb3.0 and related usb type C nodes. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystemFrank Li1-0/+30
Add i2c node in mipi[0,1] subystem for imx8qm-mek. Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystemFrank Li1-0/+68
Add pwm[0,1] and i2c[0,1] in lvds subsystem. Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory regionFrank Li1-0/+93
Add two cm4 remote-proc and related memory regions. Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8qm: add mipi subsystemFrank Li2-0/+36
Include common imx8-ss-mipi0.dtsi and imx8-ss-mipi1.dtsi. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8: add basic mipi subsystemFrank Li2-0/+267
Add basic mipi subsystem for imx8qm and imx8qxp. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8qm: add lvds subsystemFrank Li2-0/+86
Add irqsteer, pwm and i2c in lvds subsystem. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8: add basic lvds0 and lvds1 subsystemFrank Li2-0/+177
Add basic lvds0 and lvds1 subsystem for imx8qm an imx8qxp. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx95: Add NETCMIX block control supportWei Fang1-0/+12
Add NETCMIX block control support. Signed-off-by: Wei Fang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: rename gw7905 to gw75xxTim Harvey5-8/+8
The GW7905 was renamed to GW7500 before production release. While we typically do not change compatibles, the GW7905 was never released before its product name was changed to a GW7500. The use the the 'xx' wildcard is to denote the fact that this device-tree can support range of board models from GW7500 to GW7599 as has been done historically with the Gateworks baseboards to support various build customizatoins based on the same PCB. Signed-off-by: Tim Harvey <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx93-11x11-evk: Add PWM backlight for "LVDS" connectorLiu Ying1-0/+30
J702 on i.MX93 11x11 EVK base board is a 40-pin connector labelled "LVDS". This connector supports PWM backlight with default 12V power supply and ADP5585 PWM controller. Add support for the backlight. Signed-off-by: Liu Ying <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8mp-phyboard-pollux-rdk: Add support for PCIeBenjamin Hahn1-0/+27
Add support for the Mini PCIe slot. Signed-off-by: Benjamin Hahn <[email protected]> Reviewed-by: Yannic Moog <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8mp-evk: Add native HDMI outputLiu Ying1-0/+46
J17 on i.MX8mp EVK base board is a HDMI type A connector. It connects with i.MX8mp HDMI PHY. Add support for it. Signed-off-by: Liu Ying <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Reviewed-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8m: update spdif sound card node propertiesElinor Montmasson3-11/+43
The merge of imx-spdif driver into fsl-asoc-card brought new DT properties that can be used with the "fsl,imx-audio-spdif" compatible: * The "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an S/PDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". While backward compatibility is kept to support properties "spdif-controller", "spdif-in" and "spdif-out", using new properties has several benefits: * "audio-cpu" and "audio-codec" are more generic names reflecting that the fsl-asoc-card driver supports multiple hardware. They are properties already used by devices using the fsl-asoc-card driver. They are also similar to properties of simple-card: "cpu" and "codec". * "spdif-in" and "spdif-out" imply the use of the dummy codec in the driver. However, there are already two codec drivers for the S/PDIF, spdif_transmitter and spdif_receiver. It is better to declare S/PDIF Tx and Rx devices in a DT, and then reference them with "audio-codec" than using the dummy codec. For those reasons, this commit updates in-tree DTs to use the new properties: * Rename "spdif-controller" property to "audio-cpu". * Declare S/PDIF transmitter and/or receiver devices, and use them with the "audio-codec" property instead of "spdif-out" and/or "spdif-in". These modifications were tested only on an imx8mn-evk board. Note that out-of-tree and old DTs are still supported. Signed-off-by: Elinor Montmasson <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8mp-beacon: Enable DW HDMI BridgeAdam Ford1-0/+48
There is a second HDMI connector on the baseboard which is routed to the DW HDMI bridge through the PVI to the LCDIF3 and requires the HDMI PHY to be enabled too. Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8mm-beacon-kit: add DVDD-supply and DOVDD-supplyFrank Li2-0/+32
According to binding doc, DVDD-supply and DOVDD-supply is required properties. Add these to fix below warning: arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dtb: camera@10: 'DVDD-supply' is a required proper Signed-off-by: Frank Li <[email protected]> Reviewed-by: Adam Ford <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: s32v234: remove fallback compatible string arm,cortex-a9-gicFrank Li1-1/+1
Remove fallback comaptible string arm,cortex-a9-gic to fix below warning: /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed: ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed: ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long 'nvidia,tegra210-agic' was expected 'arm,cortex-a15-gic' is not one of ['nvidia,tegra186-agic', 'nvidia,tegra194-agic', 'nvidia,tegra234-agic'] 'arm,gic-400' was expected Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: fsl-ls1088a-ten64: change to low case hex valueFrank Li1-2/+2
Change to low case for hex value to fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: flash@0: partitions: Unevaluated properties are not allowed ('partition@5C0000' was unexpected) Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8mp-venice: add vddl and vana for sensor@10Frank Li3-0/+48
Add vddl and vana for sensor@10 to fix below warning: arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtb: sensor@10: 'VANA-supply' is a required property Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: fsl-lx2160a-tqmlx2160a: change "vcc" to "vdd" for hub*Frank Li1-2/+2
According to binging doc usb/ti,usb8041.yaml and in drivers/usb/misc/onboard_usb_dev.h ti_tusb8041_data = { .supply_names = { "vdd" },}; It should vdd-supply instead vcc-supply. Fixes: 04b77e0124ef ("arm64: dts: freescale: add fsl-lx2160a-mblx2160a board") Reviewed-by: Alexander Stein <[email protected]> Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8mm-venice-gw7902(3): add #address-cells for gsc@20Frank Li4-0/+8
Add #address-cells and #size-cells for gsc@20 node to fix below warning: arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dtb: gsc@20: '#address-cells' is a required property Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: fsl-ls1028: add missed supply for wm8904Frank Li1-0/+12
Add A(CP, DB, DC, MIC)VDD-supply for wm8904 to fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb: audio-codec@1a: 'AVDD-supply' is a required property Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: layerscape: rename mdio-mux-emi to mdio-mux@<addr>Frank Li3-3/+3
Rename node name mdio-mux-emi<n>@<addr> to mdio-mux@<addr>. Fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dtb: board-control@2,0: 'mdio-mux-emi1@54' does not match any of the regexes: '^mdio-mux@[a-f0-9,]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/board/fsl,fpga-qixis.yaml Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: fsl-ls1012a-frdm: move clock-sc16is7xx under root nodeFrank Li1-6/+6
Move fixed clock "clock-sc16is7x" from dspi to root node to fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: serial@0: Unevaluated properties are not allowed ('clock-sc16is7xx' was unexpected) Acked-by: Alexander Stein <[email protected]> Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: fsl-ls1043a: move "fsl,ls1043a-qdma" ahead "fsl,ls1021a-qdma"Frank Li1-1/+1
Move fsl,ls1043a-qdma ahead fallback string fsl,ls1021a-qdma. Fix warning: dma-controller@8380000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,ls1021a-qdma', 'fsl,ls1043a-qdma'] is too long Reviewed-by: Alexander Stein <[email protected]> Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: imx8-ss-img: remove undocument slot for jpegFrank Li1-2/+0
Remove undocument 'slot' property. It is default 0 at driver. We can remove it safely. Fix below warning: arch/arm64/boot/dts/freescale/imx8dx-colibri-iris.dtb: jpegdec@58400000: 'slot' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352: set SION for cmd and data pad of USDHCMarkus Niebel3-29/+34
imx93 pad integrate has one issue, refer to ERR052021: ERR052021 uSDHC: Sometimes uSDHC does not work under VDD_SOC low drive mode and nominal mode Description: uSDHC PADs have one integration issue. When CMD/DATA lines direction change from output to input, uSDHC controller begin sampling, the integration issue will make input enable signal from uSDHC propagated to the PAD with a long delay, thus the new input value on the pad comes to uSDHC lately. The uSDHC sampled the old input value and the sampling result is wrong. Workaround: Set uSDHC CMD/DATA PADs iomux register SION bit to 1, then PADs will propagate input to uSDHC with no delay, so correct value is sampled. This issue will wrongly trigger the start bit when sample the USDHC command response, cause the USDHC trigger command CRC/index/endbit error, which will finally impact the tuning pass window, espically will impact the standard tuning logic, and can't find a correct delay cell to get the best timing. This follows changes made for i.MX93 EVK with commit bb89601282fc ("arm64: dts: imx93-11x11-evk: set SION for cmd and data pad of USDHC") Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxca: add GPIO line namesMarkus Niebel1-0/+44
Provide GPIO line names for userspace usage, e.g. libgpiod. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxca: Add ethernet aliasesAlexander Stein1-0/+2
They are used by systemd to rename network interfaces to predictable interface names, e.g. end0 & end1. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxca: add missing pad configurationsAlexander Stein1-0/+42
- add missing (and currently unused) pad groups - assign muxed GPIO pads for X1 to gpio2 node Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxca: improve pad configurationMarkus Niebel1-76/+104
- disable PU/PD if already done with external resistors - do not configure Schmitt Trigger for outputs - do not configure DSE / FSEL for inputs Pad config changes suggested by hardware team. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxca: add RTC / temp sensor IRQMarkus Niebel1-0/+29
The IRQ lines from devices on SoM are connected to CPU GPIO on this mainboard. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxla: add GPIO line namesMarkus Niebel1-3/+52
Provide GPIO line names for userspace usage, e.g. libgpiod. While at it, correct the line-name property for ENET[1,2]_INT# gpio hog and LCD_BLT_EN. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxla: Add ethernet aliasesAlexander Stein1-0/+2
They are used by systemd to rename network interfaces to predictable interface names, e.g. end0 & end1. Signed-off-by: Alexander Stein <[email protected]> Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxla: add missing pad configurationsAlexander Stein1-0/+48
- add missing (and currently unused) pad groups - assign muxed GPIO pads for X1 to gpio2 node Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxla: add irq for temp sensorMarkus Niebel1-1/+16
This adds muxing and configuration of the irq output of the temp sensor on TQMa93xx that is connected to a GPIO line on MBa93xxLA While at it, add comment for RTC_EVENT for pcf85063 since the IRQ line of both devices on SoM are routed to CPU GPIO on MBa93xxLA. Signed-off-by: Markus Niebel <[email protected]> Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-04arm64: dts: freescale: imx93-tqma9352-mba93xxla: enable LPSPI6 interfaceAlexander Stein1-0/+24
LPSPI6 features a NAFE13388 analog frontend. Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.