aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2023-04-04arm64: dts: qcom: sm6375: Add CPUCP L3 nodeKonrad Dybcio1-0/+9
Configure the L3 cache DVFS scaler within the CPUCP block to allow for dynamic frequency switching. Reviewed-by: Sibi Sankar <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sm6375: Add modem nodesKonrad Dybcio1-0/+82
Add required nodes to make the embedded 5G modem boot up on SM6375. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sm6375: Add wifi nodeKonrad Dybcio1-0/+22
Add a node for ATH10K_SNoC wifi on SM6375. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sm6375: Add IMEMKonrad Dybcio1-0/+14
Add a node for the IMEM block on SM6375. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sm6375: Add RPM sleep statsKonrad Dybcio1-0/+5
Add a node for RPM sleep stats to enable sleep monitoring. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sm8550: Use the correct BWMON fallback compatibleKonrad Dybcio1-1/+1
Use the correct fallback compatible for the BWMONv4 with merged global and monitor register spaces. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sdm845: Use the correct BWMON compatibleKonrad Dybcio1-1/+1
Drop the incorrect msm8998 fallback and use the new qcom,sdm845-cpu-bwmon compatible to distinguish the CPU BWMON found on this platform. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sc8280xp: Use the correct BWMON fallback compatibleKonrad Dybcio1-1/+1
Use the correct fallback compatible for the BWMONv4 with merged global and monitor register spaces. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sc7280: Use the correct BWMON fallback compatibleKonrad Dybcio1-1/+1
Use the correct fallback compatible for the BWMONv4 with merged global and monitor register spaces. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sm6115: Add GPUCC and Adreno SMMUKonrad Dybcio1-0/+38
Add GPUCC and Adreno SMMU nodes in preparation for adding the GPU itself. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: msm8998-yoshino: Use actual pin names for pin nodesKonrad Dybcio2-32/+31
With the gpio-line-names in place coming from SONY themselves, we can now make the pin nodes and their labels to more closely resemble the actual thing. 4k has been renamed to four_k due to dtc limitations. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: msm8998-yoshino: Use SONY GPIO namesKonrad Dybcio2-0/+374
Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the Yoshino devices DTs to better document the hardware. Lilac and Poplar have identical pin assignments. Diff between these two and maple: TLMM: - "NC", + "TS_VDDIO_EN", PMI8998: - "NC" + "USB_SWITCH_SEL" - "NC" + "4K_DISP_DCDC_EN" PM8005: - "NC" + "EAR_EN" Which is probably due to Maple being designed and released quite a bit earlier than the other two and it having a super high tech true-4K display. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sdm845-xiaomi-beryllium: add notification LEDJoel Selvaraj1-0/+11
The Poco F1 has a single color white notification LED. Enable the Qualcomm Light Pulse Generator (LPG) driver based notification LED. Signed-off-by: Joel Selvaraj <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: qdu1000: Add LLCC/system-cache-controllerKomal Bajaj1-0/+12
Add a DT node for Last level cache (aka. system cache) controller which provides control over the last level cache present on QDU1000 and QRU1000 SoCs. Signed-off-by: Komal Bajaj <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: apq8096-db820c: drop unit address from PMI8994 regulatorKrzysztof Kozlowski2-4/+1
The PMIC regulators are not supposed to have unit addresses. Fixes: 2317b87a2a6f ("arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: msm8994-msft-lumia-octagon: drop unit address from PMI8994 ↵Krzysztof Kozlowski1-2/+1
regulator The PMIC regulators are not supposed to have unit addresses. Fixes: 60b214effb80 ("arm64: dts: qcom: msm8994-octagon: Configure regulators") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: msm8994-kitakami: drop unit address from PMI8994 regulatorKrzysztof Kozlowski1-2/+1
The PMIC regulators are not supposed to have unit addresses. Fixes: e9783584c9b7 ("arm64: dts: qcom: msm8994-kitakami: Add VDD_GFX regulator") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: msm8998-oneplus-cheeseburger: revert "fix backlight pin ↵Krzysztof Kozlowski1-1/+1
function" This reverts commit 46546f28825cf3a5ef6873b9cf947cd85c8a7258 because it mistakenly took PMIC pinctrl/GPIO as TLMM. The TLMM pinctrl uses "gpio" function, but PMIC uses "normal", so original code was correct: msm8998-oneplus-cheeseburger.dtb: pmic@2: gpio@c000:button-backlight-state: 'oneOf' conditional failed, one must be fixed: 'gpio' is not one of ['normal', 'paired', 'func1', 'func2', 'dtest1', 'dtest2', 'dtest3', 'dtest4', 'func3', 'func4'] Fixes: 46546f28825c ("arm64: dts: qcom: msm8998-oneplus-cheeseburger: fix backlight pin function") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sc7180-trogdor-pazquel: correct trackpad supplyKrzysztof Kozlowski1-1/+1
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other boards which use elan,ekth3000 with valid VCC: sc7180-trogdor-pazquel360-lte.dtb: trackpad@15: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: fb69f6adaf88 ("arm64: dts: qcom: sc7180: Add pazquel dts files") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sc7180-trogdor-lazor: correct trackpad supplyKrzysztof Kozlowski1-1/+1
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other boards which use elan,ekth3000 with valid VCC: sc7180-trogdor-lazor-limozeen-nots-r4.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 2c26adb8dbab ("arm64: dts: qcom: Add sc7180-lazor-limozeen skus") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sc7280-herobrine-villager: correct trackpad supplyKrzysztof Kozlowski1-1/+1
The hid-over-i2c takes VDD, not VCC supply. Fix copy-pasta from other Herobrine boards which use elan,ekth3000 with valid VCC: sc7280-herobrine-villager-r1-lte.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: ee2a62116015 ("arm64: dts: qcom: sc7280: Add device tree for herobrine villager") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: sda660-inforce: correct key node nameKrzysztof Kozlowski1-1/+1
gpio-key bindings expect children to be named with generic prefix: sda660-inforce-ifc6560.dtb: gpio-keys: 'volup' does not match any of the regexes: ... Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: msm8916-yiming-uz801v3: Add initial device treeYang Xiwen2-0/+36
This commit adds support for the uz801 v3.0 WiFi/LTE dongle made by Henan Yiming Technology Co., Ltd. based on MSM8916. Note: The original firmware does not support 64-bit OS. It is necessary to flash 64-bit TZ firmware to boot arm64. Currently supported: - All CPU cores - Buttons - LEDs - Modem - SDHC - USB Device Mode - UART Signed-off-by: Yang Xiwen <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-04arm64: dts: qcom: msm8916: Move WCN compatible to boardsStephan Gerhold19-90/+146
On MSM8916 the wireless connectivity functionality (WiFi/Bluetooth) is split into the digital part inside the SoC and the analog RF part inside a supplementary WCN36xx chip. For MSM8916, three different options exist: - WCN3620 (WLAN 802.11 b/g/n 2.4 GHz + Bluetooth) - WCN3660B (WLAN 802.11 a/b/g/n 2.4/5 GHz + Bluetooth) - WCN3680B (WLAN 802.11ac 2.4/5 GHz + Bluetooth) Choosing one of these is up to the board vendor. This means that the compatible belongs into the board-specific DT part so people porting new boards pay attention to set the correct compatible. Right now msm8916.dtsi sets "qcom,wcn3620" as default compatible, which does not work at all for boards that have WCN3660B or WCN3680B. Remove the default compatible from msm8196.dtsi and move it to the board DT as follows: - Boards with only &pronto { status = "okay"; } used the default "qcom,wcn3620" so far. They now set this explicitly for &wcnss_iris. - Boards with &pronto { ... iris { compatible = "qcom,wcn3660b"; }}; already had an override that just moves to &wcnss_iris now. - For msm8916-samsung-a2015-common.dtsi the WCN compatible differs for boards making use of it (a3u: wcn3620, a5u: wcn3660b, e2015: wcn3620) so the definitions move to the board-specific DT part. Since this requires touching all the board DTs, use this as a chance to name the WCNSS-related labels consistently, so everything is grouped properly when sorted alphabetically. No functional change, just clean-up for more clarity & easier porting. Aside from ordering the generated DTBs are identical. Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-28Merge branch 'arm64-fixes-for-6.3' into arm64-for-6.4Bjorn Andersson20-72/+106
Merge the arm64-fixes-for-6.3 branch to avoid merge conflicts with changes for v6.4.
2023-03-27arm64: dts: qcom: sdm845-xiaomi-beryllium: correct compatibleKrzysztof Kozlowski1-1/+1
Tianma FHD panel is supposed to be used with fallback compatible: sdm845-xiaomi-beryllium-tianma.dtb: panel@0: compatible: ['tianma,fhd-video'] is too short Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sdm845-xiaomi-beryllium: drop invalid panel propertiesKrzysztof Kozlowski1-3/+0
Panel does not have children with unit-addresses thus address/size-cells are not valid: sdm845-xiaomi-beryllium-tianma.dtb: panel@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sdm845-oneplus: drop invalid panel propertiesKrzysztof Kozlowski1-2/+0
Panel does not have children with unit-addresses thus address/size-cells are not valid: panel@0: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sc7180-trogdor-lazor: correct panel compatibleKrzysztof Kozlowski1-1/+1
innolux,n116bca-ea1 is not exactly compatible witg innolux,n116bge, as they have their own driver data. Bindings do not allow fallback: sc7180-trogdor-lazor-limozeen-nots-r4.dtb: panel: compatible: ['innolux,n116bca-ea1', 'innolux,n116bge'] is too long Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sc7180-qcard: use just "port" in panelKrzysztof Kozlowski1-8/+3
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc7280-herobrine-zombie-nvme-lte.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sc7180-trogdor-wormdingler: use just "port" in panelKrzysztof Kozlowski1-8/+3
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc7180-trogdor-wormdingler-rev1-boe.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sc7180-trogdor-quackingstick: use just "port" in panelKrzysztof Kozlowski1-8/+3
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc7180-trogdor-quackingstick-r0.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sc7180-idp: use just "port" in panelKrzysztof Kozlowski1-8/+3
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc7180-idp.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' sc7180-idp.dtb: panel@0: 'port' is a required property Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sc8280xp-crd: use just "port" in panelKrzysztof Kozlowski1-5/+3
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc8280xp-crd.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: use just "port" in panelKrzysztof Kozlowski1-5/+3
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sc8280xp-lenovo-thinkpad-x13s.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sdm845-cheza: use just "port" in Innolux panelKrzysztof Kozlowski1-5/+3
The panel bindings expect to have only one port, thus they do not allow to use "ports" node: sdm845-cheza-r2.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registersJohan Hovold1-2/+3
The pmk8280 PMIC PON peripheral is gen3 and uses two sets of registers; hlos and pbs. This specifically fixes the following error message during boot when the pbs registers are not defined: PON_PBS address missing, can't read HW debounce time Note that this also enables the spurious interrupt workaround introduced by commit 0b65118e6ba3 ("Input: pm8941-pwrkey - add software key press debouncing support") (which may or may not be needed). Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device") Signed-off-by: Johan Hovold <[email protected]> Tested-by: Steev Klimaszewski <[email protected]> #Thinkpad X13s Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-27arm64: dts: qcom: sc8280xp-x13s: drop bogus 'input-enable'Johan Hovold1-1/+0
The sc8280xp pin controller does not have a way to enable or disable the input buffer so drop the unnecessary 'input-enable' property which is about to be deprecated. Link: https://lore.kernel.org/lkml/20230323102605.6.I291ce0ba2c6ea80b341659c4f75a567a76dd7ca6@changeid Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-24arm64: dts: qcom: sdm630: move DSI opp-table into DSI nodeKrzysztof Kozlowski1-19/+19
The soc node is supposed to have only device nodes with MMIO addresses, so move the DSI OPP into the DSI controller node to fix: sda660-inforce-ifc6560.dtb: soc: opp-table-dsi: {'compatible': ['operating-points-v2'], ... should not be valid under {'type': 'object'} From schema: dtschema/schemas/simple-bus.yaml Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-24arm64: dts: qcom: msm8996-xiaomi: drop simple-bus from clocksKrzysztof Kozlowski1-2/+0
'clocks' node is not a bus, but just a placeholder for clocks: msm8996-xiaomi-gemini.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' From schema: dtschema/schemas/simple-bus.yaml msm8996-xiaomi-gemini.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ... From schema: dtschema/schemas/simple-bus.yaml Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-24arm64: dts: qcom: msm8994-msft-lumia: drop simple-bus from clocksKrzysztof Kozlowski1-2/+0
'clocks' node is not a bus, but just a placeholder for clocks: msm8992-msft-lumia-octagon-talkman.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' From schema: dtschema/schemas/simple-bus.yaml msm8992-msft-lumia-octagon-talkman.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ... From schema: dtschema/schemas/simple-bus.yaml Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-24arm64: dts: qcom: apq8096-db820c: drop simple-bus from clocksKrzysztof Kozlowski1-1/+0
'clocks' node is not a bus, but just a placeholder for clocks: apq8096-db820c.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' From schema: dtschema/schemas/simple-bus.yaml apq8096-db820c.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ... From schema: dtschema/schemas/simple-bus.yaml Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-24arm64: dts: qcom: sm8450: fix pcie1 gpios properties nameNeil Armstrong1-2/+2
Add the final "s" to the pgio properties and fix the invalid "enable" name to the correct "wake", checked against the HDK8450 schematics. Fixes: bc6588bc25fb ("arm64: dts: qcom: sm8450: add PCIe1 root device") Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-4-0ca1bea1a843@linaro.org
2023-03-24arm64: dts: qcom: sm8450: remove invalid power-domain-names in pcie nodesNeil Armstrong1-2/+0
Fixes the following DT bindings check error: pci@1c00000: Unevaluated properties are not allowed ('power-domain-names' were unexpected) Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-3-0ca1bea1a843@linaro.org
2023-03-24arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY nodeDmitry Baryshkov1-2/+2
Correct PCIe PHY enablement to refer the QMP device nodes rather than PHY device nodes. QMP nodes have 'status = "disabled"' property in the ipq8074.dtsi, while PHY nodes do not correspond to the actual device and do not have the status property. Fixes: 1ed34da63a37 ("arm64: dts: qcom: Add board support for HK10") Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-24arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY nodeDmitry Baryshkov1-2/+2
Correct PCIe PHY enablement to refer the QMP device nodes rather than PHY device nodes. QMP nodes have 'status = "disabled"' property in the ipq8074.dtsi, while PHY nodes do not correspond to the actual device and do not have the status property. Fixes: e8a7fdc505bb ("arm64: dts: ipq8074: qcom: Re-arrange dts nodes based on address") Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-24arm64: dts: qcom: sc8280xp-x13s: enable alternate touchpadJohan Hovold1-9/+1
Enable both touchpad nodes in the devictree and let the HID driver determine which one is actually populated (by attempting to read from each i2c address). Ideally this would not be needed and the boot firmware should instead enable only the node for the populated touchpad, but this is unlikely to ever be realised for the X13s. Note that the pin configuration must currently be moved to the parent i2c-bus node even though only one of these nodes will ever be successfully probed on a specific device (e.g. to allow them to be probed in parallel). Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-23arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarityKrzysztof Kozlowski1-2/+2
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-23arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarityKrzysztof Kozlowski1-2/+2
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-03-23arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarityKrzysztof Kozlowski1-2/+2
The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.