aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-08-17clock-imx35: Calculate the base clock rate for the IPU unitJuergen Beisert1-1/+28
The mx3fb driver needs the clock the IPU runs in order to calculate the divider for the LCD clock. This patch adds the clock rate calculation routine for the i.MX35 CPU. Signed-off-by: Juergen Beisert <[email protected]> Signed-off-by: Michael Grzeschik <[email protected]> Signed-off-by: Sascha Hauer <[email protected]>
2010-08-17clock-imx35: correct arm and ahb clock calculationMarc Kleine-Budde1-2/+2
According to the Datasheet: "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual, Rev. 2" "Figure 14-24. Clock Control And Gating" change the result of get_rate_ahb based on the frequency returned by get_rate_arm to calculate the proper rate. Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Michael Grzeschik <[email protected]> Signed-off-by: Sascha Hauer <[email protected]>
2010-08-17clock-imx35: fix divider if ahb is source for ipg_perMarc Kleine-Budde1-1/+1
According to the Datasheet: "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual, Rev. 2" "Table 14-6. PDR0 Field Descriptions" the divider is CCM_PER_AHB[3:0] + 1. This patch adds the missing + 1. Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Michael Grzeschik <[email protected]> Signed-off-by: Sascha Hauer <[email protected]>
2010-08-17i.MX35: remove get_3_3_div helper functionSascha Hauer1-15/+9
In the v2 reference manual there are no dividers combined of two dividers. Instead, all dividers are simple 6bit dividers. I assume the combined dividers only exist in preliminary hardware. Signed-off-by: Sascha Hauer <[email protected]>
2010-08-17mx35: Fix boot ROM hang in internal boot modeHans J. Koch1-4/+16
If a watchdog reset occurs after booting in internal boot mode, the i.MX35 won't boot anymore. The boot ROM code seems to assume that some clocks are turned on (they are after a power-on reset). This patch turns on the necessary clocks. Signed-off-by: Hans J. Koch <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Reported-by: John Ogness <[email protected]> Signed-off-by: Sascha Hauer <[email protected]>
2010-08-16of: Fix missing includesGrant Likely2-1/+3
This patch fixes missing includes from a number of .c files because the code (wrongfully) depended on prom.h including them. The include of linux/of_address.h was removed in microblaze prom.h in commit "of/address: Clean up function declarations" (sha1 id 22ae782f8), but not fixed in some callers. This patch fixes them up. Signed-off-by: Grant Likely <[email protected]> Tested-by: Michal Simek <[email protected]>
2010-08-16sparc: Hook up new fanotify and prlimit64 syscalls.David S. Miller4-4/+19
The only tricky bit is the compat version of fanotify_mark, which which on 32-bit the 64-bit mark argument is passed in as "high32", "low32". Signed-off-by: David S. Miller <[email protected]>
2010-08-16Merge branch 'master' of ↵David S. Miller1399-354605/+73191
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-08-16arm,kgdb: fix GDB_MAX_REGS no longer usedEric Miao1-1/+1
According to commit 22eeef4bb2a7fd225089c0044060ed1fbf091958 kgdb,arm: Individual register get/set for arm It's now replaced by DBG_MAX_REG_NUM. Signed-off-by: Eric Miao <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2010-08-16kgdb: add missing __percpu markup in arch/x86/kernel/kgdb.cNamhyung Kim1-1/+1
breakinfo->pev is a pointer to percpu pointer but was missing __percpu markup. Add it. Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2010-08-16microblaze: Fix of: eliminate of_device->node and dev_archdata->{of,prom}_nodeMichal Simek1-1/+1
Commit 58f9b0b02414062eaff46716bc04b47d7e79add5 should contain this fix too. Signed-off-by: Michal Simek <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-08-16microblaze: Fix of/address: Merge all of the bus translation codeMichal Simek1-1/+1
Commit dbbdee94734bf6f1db7af42008a53655e77cab8f removed of_irq_pci_swizzle but didn't use pci_swizzle_interrupt_pin instead. Signed-off-by: Michal Simek <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-08-16sparc: Really fix "console=" for serial consoles.David S. Miller1-0/+4
If a video head and keyboard are hooked up, specifying "console=ttyS0" or similar to use a serial console will not work properly. The key issue is that we must register all serial console capable devices with register_console(), otherwise the command line specified device won't be found. The sun serial drivers would only register themselves as console devices if the OpenFirmware specified console device node matched. To fix this part we now unconditionally get the serial console register by setting serial_drv->cons always. Secondarily we must not add_preferred_console() using the firmware provided console setting if the user gaven an override on the kernel command line using "console=" The "primary framebuffer" matching logic was always triggering o n openfirmware device node match, make it not when a command line override was given. Reported-by: Frans Pop <[email protected]> Tested-by: Frans Pop <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-08-16eukrea-baseboards: fix the merge in one fileEric Bénard5-8/+8
Last change I did made a big mess in function names and CONFIG names, this patch fixes this so that the baseboard support is really built when selected. Signed-off-by: Eric Bénard <[email protected]> Signed-off-by: Sascha Hauer <[email protected]>
2010-08-16OMAP3: PM: ensure IO wakeups are properly disabledKevin Hilman1-1/+3
Commit 5a5f561 (convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes) mistakenly removed the check for PER when disabling the IO chain. During idle, if the PER powerdomain transitions into a lower state and CORE does not, the IO pad wakeups are not being disabled in the idle path after they are enabled. This can happen with the lower C-states when using CPUidle for example. This patch ensures that the check for disabling IO wakeups also checks for PER transitions, matching the check done to enable IO wakeups. Found when debugging PM/CPUidle related problems reported by Ameya Palande <[email protected]>. Problems were triggered particularily on boards with UART2 consoles (n900, Overo) since UART2 is in the PER powerdomain. Tested on l-o master (omap3_defonfig + CONFIG_CPU_IDLE=y) as well as with current PM branch. Boards tested: n900, Overo, omap3evm. Cc: Paul Walmsley <[email protected]> Cc: Ameya Palande <[email protected]> Tested-by: Jarkko Nikula <[email protected]> Signed-off-by: Kevin Hilman <[email protected]> [[email protected]: updated description to clarify the transistion] Signed-off-by: Tony Lindgren <[email protected]>
2010-08-16omap: Fix omap_4430sdp_defconfig for make oldconfigTony Lindgren1-0/+3
Commit ffb63e3402849e1b70119ee0c9a81dc9da4dfa97 changed Kconfig to select support for omap2, 3 and 4 by default. However, CONFIG_SMP won't currently work properly on uniprocessor ARMs, or if support for earlier ARM cores is selected in. Fix this by updating omap_4430sdp_defconfig to not select omap2 or 3 at this point. Signed-off-by: Tony Lindgren <[email protected]> Acked-by: Santosh Shilimkar <[email protected]>
2010-08-16omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirqTony Lindgren1-2/+4
Otherwise we get the following error when enabling CONFIG_SMP for omap3_defconfig: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:48: Error: bad instruction `test_for_ipi r0,r6,r5,lr' arch/arm/kernel/entry-armv.S:48: Error: bad instruction `test_for_ltirq r0,r6,r5,lr' arch/arm/kernel/entry-armv.S:48: Error: bad instruction `test_for_ipi r0,r6,r5,lr' arch/arm/kernel/entry-armv.S:48: Error: bad instruction `test_for_ltirq r0,r6,r5,lr' Signed-off-by: Tony Lindgren <[email protected]> Acked-by: Santosh Shilimkar <[email protected]>
2010-08-16omap: Fix sev instruction usage for multi-omapTony Lindgren3-9/+2
Otherwise we get the following error with omap3_defconfig and CONFIG_SMP: Error: selected processor does not support `sev' Signed-off-by: Tony Lindgren <[email protected]> Acked-by: Santosh Shilimkar <[email protected]>
2010-08-16OMAP3: Fix a cpu type check problemstanley.miao1-7/+7
cpu_is_omap3517() and cpu_is_omap3505() are the subgroups of cpu_is_omap34xx(), so we should check cpu_is_omap3517() and cpu_is_omap3505() first, then check cpu_is_omap34xx(). Otherwise, All AM35XX (Sitara) clocks do not get registered and device drivers (ti_hecc, etc...) that depend on those clocks are failing to get the clock and end up with non working device. Signed-off-by: Stanley.Miao <[email protected]> Tested-by: Igor Grinberg <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2010-08-16omap3: id: fix 3630 rev detectionNishanth Menon1-1/+1
Wrong placement of break causes all revisions of 3630 to be detected as 3630 es1.2, we need to break main loop if we have an identified chip, default falls through as in the rest of the switches in this function. Cc: Paul Walmsley <[email protected]> Cc: Sanjeev Premi <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Manjunath K <[email protected]> Cc: Anand Gadiyar <[email protected]> Cc: Felipe Balbi <[email protected]> Signed-off-by: Nishanth Menon <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2010-08-16ARM: mach-shmobile: Fix up gpio-leds pdata definition.Paul Mundt1-1/+1
Signed-off-by: Paul Mundt <[email protected]>
2010-08-16ARM: mach-shmobile: AP4EVB: use gpio-leds for leds.Arnd Hannemann1-14/+38
This allows control of the leds on the AP4EVB board by kernel events (triggers) like mmc0/mmc1. In userland, the leds won't be available anymore over /sys/class/gpio but via /sys/class/leds. Signed-off-by: Arnd Hannemann <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-08-16ARM: mach-shmobile: add clock definitions for CEU and CSI2Guennadi Liakhovetski1-1/+5
Two more clocks to be managed by the runtime PM. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-08-16ARM: mach-shmobile: Runtime PM V3Magnus Damm3-2/+171
This is the SH-Mobile ARM Runtime PM implementation V3. Only clocks are managed at this point. If Runtime PM is disabled then the clocks will be enabled before ->probe() and disabled after ->remove(). Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2010-08-15Merge branch 'release' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: gcc-4.6: ACPI: fix unused but set variables in ACPI ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS ACPI processor: remove deprecated ACPI procfs I/F ACPI power_resource: remove unused procfs I/F ACPI: remove deprecated ACPI procfs I/F ACPI: introduce drivers/acpi/sysfs.c ACPI: introduce module parameter acpi.aml_debug_output ACPI: introduce drivers/acpi/debugfs.c ACPI, APEI, ERST debug support ACPI, APEI, Manage GHES as platform devices ACPI, APEI, Rename CPER and GHES severity constants ACPI, APEI, Fix a typo of error path of apei_resources_request ACPI / ACPICA: Fix reference counting problems with GPE handlers ACPI: Add the check of ADR flag in course of finding ACPI handle for PCI device ACPI / Sleep: Drop acpi_suspend_finish() ACPI / Sleep: Consolidate suspend and hibernation routines ACPI / Wakeup: Simplify enabling of wakeup devices ACPI / Sleep: Rework enabling wakeup devices ACPI / Sleep: Free NVS copy if suspending of devices fails Fixed up totally buggered "ACPI: fix unused but set variables in ACPI" patch that doesn't even compile in the merge. Thanks to Sedat Dilek <[email protected]> for noticing the breakage before I even pulled. And a big "Grrr.." at Len for not even bothering to compile the tree before asking me to pull.
2010-08-15Merge git://git.infradead.org/mtd-2.6Linus Torvalds6-0/+6
* git://git.infradead.org/mtd-2.6: mtd/nand_ids: Fix buswidth mtd/m25p80: fix test for end of loop mtd/m25p80: retlen is never NULL MIPS: Fix gen_nand probe structures contents gen_nand: Test if nr_chips field is valid BFIN: Fix gen_nand probe structures contents nand/denali: move all hardware initialization work to denali_hw_init nand/denali: Add a page check in denali_read_page & denali_read_page_raw nand/denali: use cpu_relax() while waiting for hardware interrupt nand/denali: change read_status function method nand/denali: Fixed check patch warnings ARM: Fix gen_nand probe structures contents mtd/nand_base: fix kernel-doc warnings & typos nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk nand/denali: Fixed handle ECC error bugs nand/denali: use iowrite32() to replace denali_write32() nand/denali: Fixed probe function bugs
2010-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds29-205/+213
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: don't validate CROSS_COMPILE needlessly arch/tile: export only COMMAND_LINE_SIZE to userspace. arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN arch/tile: Rename the hweight() implementations to __arch_hweight() arch/tile: extend syscall ABI to set r1 on return as well. arch/tile: Various cleanups. arch/tile: support backtracing on TILE-Gx arch/tile: Fix a couple of issues with the COMPAT code for TILE-Gx. arch/tile: Use separate, better minsec values for clocksource and sched_clock. arch/tile: correct a bug in freeing bootmem by VA for the optional second initrd. arch: tile: mm: pgtable.c: Removed duplicated #include arch: tile: kernel/proc.c Removed duplicated #include Add fanotify syscalls to <asm-generic/unistd.h>. arch/tile: support new kunmap_atomic() naming convention. tile: remove unused ISA_DMA_THRESHOLD define Conflicts in arch/tile/configs/tile_defconfig (pick the mainline version with the reduced defconfig).
2010-08-15ARM: Tighten check for allowable CPSR valuesRussell King1-4/+13
Reviewed-by: Arve Hjønnevåg <[email protected]> Acked-by: Dima Zavin <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-08-15ARM: 6329/1: wire up sys_accept4() on ARMMikael Pettersson2-0/+2
sys_accept4() was added in kernel 2.6.28, but ARM was not updated to include it. The number and types of parameters is such that no ARM-specific processing is needed, so wiring up sys_accept4() just requires defining __NR_accept4 and adding a direct call in the syscall entry table. Tested with an EABI 2.6.35 kernel and Ulrich Drepper's original accept4() test program, modified to define __NR_accept4 for ARM. Using the updated unistd.h also eliminates a warning then building glibc (2.10.2 and newer) about accept4() being unimplemented. Signed-off-by: Mikael Pettersson <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-08-15arch/tile: don't validate CROSS_COMPILE needlesslyChris Metcalf1-9/+11
With this change, the arch/tile Makefile will only check for a valid combination of CROSS_COMPILE vs "uname -m" for a few common targets that are typically the ones we get wrong (vmlinux, all, and modules). The change handles the case of an empty "make" goal like "make all". Signed-off-by: Chris Metcalf <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]>
2010-08-15arch/tile: export only COMMAND_LINE_SIZE to userspace.Chris Metcalf1-2/+6
This fixes a failure in "make headers_check" for tile. I hadn't realized this file was exported to userspace by default. Signed-off-by: Chris Metcalf <[email protected]>
2010-08-15arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGNChris Metcalf1-3/+2
See commit a6eb9fe105d5de0053b261148cee56c94b4720ca. Signed-off-by: Chris Metcalf <[email protected]> Acked-by: FUJITA Tomonori <[email protected]>
2010-08-15KVM: destroy workqueue on kvm_create_pit() failuresXiaotian Feng1-1/+1
kernel needs to destroy workqueue if kvm_create_pit() fails, otherwise after pit is freed, the workqueue is leaked. Signed-off-by: Xiaotian Feng <[email protected]> Cc: Avi Kivity <[email protected]> Cc: Marcelo Tosatti <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Gleb Natapov <[email protected]> Cc: "Michael S. Tsirkin" <[email protected]> Cc: Gregory Haskins <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2010-08-15KVM: fix poison overwritten caused by using wrong xstate sizeXiaotian Feng2-2/+3
fpu.state is allocated from task_xstate_cachep, the size of task_xstate_cachep is xstate_size. xstate_size is set from cpuid instruction, which is often smaller than sizeof(struct xsave_struct). kvm is using sizeof(struct xsave_struct) to fill in/out fpu.state.xsave, as what we allocated for fpu.state is xstate_size, kernel will write out of memory and caused poison/redzone/padding overwritten warnings. Signed-off-by: Xiaotian Feng <[email protected]> Reviewed-by: Sheng Yang <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Suresh Siddha <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Avi Kivity <[email protected]> Cc: Robert Richter <[email protected]> Cc: Sheng Yang <[email protected]> Cc: Marcelo Tosatti <[email protected]> Cc: Gleb Natapov <[email protected]> Cc: Jan Kiszka <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2010-08-15Merge branch 'linus' into releaseLen Brown2416-175615/+118178
Conflicts: drivers/acpi/debug.c Signed-off-by: Len Brown <[email protected]>
2010-08-14ARM: 6328/1: Build with -fno-dwarf2-cfi-asmMichal Marek1-0/+3
Commit d0679c7 restricted this workaround to powerpc only, but it turns out that ARM needs it as well. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=16310 . Reported-and-Tested-by: Robert Nelson <[email protected]> Acked-by: Mikael Pettersson <[email protected]> Signed-off-by: Michal Marek <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-08-14defconfig reductionSam Ravnborg197-207237/+1181
Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: Sam Ravnborg <[email protected]>
2010-08-14archs: replace unifdef-y with header-ySam Ravnborg11-73/+65
unifdef-y and header-y have same semantic, so drop unifdef-y Signed-off-by: Sam Ravnborg <[email protected]>
2010-08-14Merge branch 'for-linus/samsung-2635' of git://git.fluff.org/bjdooks/linuxLinus Torvalds11-65/+213
* 'for-linus/samsung-2635' of git://git.fluff.org/bjdooks/linux: DMAENGINE: correct PL080 register header file ARM: SAMSUNG: Fix on build warning about dependency in Kconfig ARM: SMDK6410: Make virtual screen twice depth of real ARM: S3C64XX: Update consistent DMA size to 8MiB ARM: S3C64XX: Add audio support to SmartQ ARM: S3C64XX: Framebuffer fix for SmartQ5 ARM: S3C64XX: Set wifi and iNAND as permanently connected SD devices on SmartQ boards ARM: S3C64XX: Move SmartQ LCD control platform definition to shared file ARM: mach-real6410: add sdhc device support ARM: mach-real6410: add dm9000 ethernet support for mach-real6410 ARM: S3C64XX: Support for Real6410 Fix up trivial conflicts in arch/arm/mach-s3c64xx/mach-smartq5.c ("remove pixclock" vs "Framebuffer fix for SmartQ5")
2010-08-14Merge branch 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linuxLinus Torvalds1-0/+9
* 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linux: i2c/nuc900: add i2c driver support for nuc900 i2c: Enable NXP LPC support in Kconfig i2c-pxa: fix compiler warning, due to missing const i2c: davinci: bus recovery procedure to clear the bus i2c: davinci: Add cpufreq support i2c: davinci: Add suspend/resume support i2c: davinci: Add helper functions for power management i2c: davinci: misc. cleanups: remove MOD_REG_BIT and IO_ADDRESS usage i2c: davinci: Fix smbus Oops with AIC33 usage
2010-08-14Merge branch 'for-2636/s3c64xx' into for-linus/samsung-2635Ben Dooks8-62/+208
2010-08-14DMAENGINE: correct PL080 register header fileLinus Walleij2-2/+4
This PL008 among all other variables named PL080 doesn't seem right. Fix it. Also add some missing defined that I use in the new PL08x driver. Acked-by: Ben Dooks <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Ben Dooks <[email protected]>
2010-08-14ARM: SAMSUNG: Fix on build warning about dependency in KconfigKukjin Kim1-1/+1
This patch fixes on following build warning. warning: (PLAT_S5P && (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) || ARCH_S3C64XX && <choice>) selects PLAT_SAMSUNG which has unmet direct dependencies (ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX) Signed-off-by: Kukjin Kim <[email protected]> Cc: Ben Dooks <[email protected]> Signed-off-by: Ben Dooks <[email protected]>
2010-08-14ARM: SMDK6410: Make virtual screen twice depth of realBen Dooks1-0/+2
For situations where double buffering is needed (such as the current Android) make the screen virtual y size twice the LCD size so that there is space for a second screen that can be switched to. Signed-off-by: Ben Dooks <[email protected]>
2010-08-14ARM: S3C64XX: Update consistent DMA size to 8MiBBen Dooks1-0/+2
Change the area available for consitent DMA allocations from the default to 8MiB to allow drivers such as the framebuffer to get more memory (for situations where larger virtual screen resolutions are needed). Signed-off-by: Ben Dooks <[email protected]>
2010-08-14ARM: S3C64XX: Add audio support to SmartQMaurus Cuelenaere1-0/+8
This adds the I²C board information for the WM8987 used in the SmartQ as audio codec and adds the I²C/I²S platform drivers. Signed-off-by: Maurus Cuelenaere <[email protected]> Signed-off-by: Ben Dooks <[email protected]>
2010-08-14ARM: S3C64XX: Framebuffer fix for SmartQ5Patrick Georgi1-4/+4
The following change makes the framebuffer work on SmartQ5. There are still some problems with ADC, so this patch alone won't make the device run (or even give a working fb), but it's one issue less to think about. Signed-off-by: Patrick Georgi <[email protected]> Signed-off-by: Maurus Cuelenaere <[email protected]> Signed-off-by: Ben Dooks <[email protected]>
2010-08-14ARM: S3C64XX: Set wifi and iNAND as permanently connected SD devices on ↵Maurus Cuelenaere1-1/+1
SmartQ boards This patch changes the platform data definitions of the wifi and iNAND chip on the SmartQ 5 and 7 to indicate that they don't have a CD line available and are thus hard-wired to the SDHCI data lines. Signed-off-by: Maurus Cuelenaere <[email protected]> Signed-off-by: Ben Dooks <[email protected]>
2010-08-14ARM: S3C64XX: Move SmartQ LCD control platform definition to shared fileMaurus Cuelenaere3-58/+30
This shares the common LCD control platform definition used in the SmartQ 5 and 7. This also corrects it as a GPIO bitbanged SPI device instead of an I²C one, which was wrong. Signed-off-by: Maurus Cuelenaere <[email protected]> Signed-off-by: Ben Dooks <[email protected]>
2010-08-14ARM: mach-real6410: add sdhc device supportDarius Augulis2-0/+6
Register SHDCI devices Signed-off-by: Darius Augulis <[email protected]> [[email protected]: rewrite header[ Signed-off-by: Ben Dooks <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.