aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-12-11arm64: Use the generic devmem_is_allowed()Palmer Dabbelt3-24/+1
I recently copied this into lib/ for use by the RISC-V port. Acked-by: Catalin Marinas <[email protected]> Reviewed-by: Luis Chamberlain <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-12-11arm: Use the generic devmem_is_allowed()Palmer Dabbelt3-24/+1
This is exactly the same as the arm64 version, which I recently copied into lib/ for use by the RISC-V port. Reviewed-by: Luis Chamberlain <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-12-11RISC-V: Use the new generic devmem_is_allowed()Palmer Dabbelt1-0/+1
This allows us to enable STRICT_DEVMEM. Reviewed-by: Luis Chamberlain <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-12-11x86/ia32_signal: Propagate __user annotation properlyLukas Bulwahn1-1/+1
Commit 57d563c82925 ("x86: ia32_setup_rt_frame(): consolidate uaccess areas") dropped a __user annotation in a cast when refactoring __put_user() to unsafe_put_user(). Hence, since then, sparse warns in arch/x86/ia32/ia32_signal.c:350:9: warning: cast removes address space '__user' of expression warning: incorrect type in argument 1 (different address spaces) expected void const volatile [noderef] __user *ptr got unsigned long long [usertype] * Add the __user annotation to restore the propagation of address spaces. Signed-off-by: Lukas Bulwahn <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-12-11Merge tag 'usb-serial-5.11-rc1' of ↵Greg Kroah-Hartman8-8/+0
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.11-rc1 Here are the USB-serial updates for 5.11-rc1, including: - keyspan_pda write-implementation fixes - digi_acceleport write-wakeup fix - mos7720 parport-restore fix - mos7720 parport-tasklet removal - cp210x termios-handling cleanups - option device-flag fix - ftdi_sio GPIO CBUS-configuration improvements - removal of in_interrupt() uses Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (30 commits) USB: serial: ftdi_sio: log the CBUS GPIO validity USB: serial: ftdi_sio: drop GPIO line checking dead code USB: serial: ftdi_sio: report the valid GPIO lines to gpiolib USB: serial: option: add interface-number sanity check to flag handling USB: serial: cp210x: clean up dtr_rts() USB: serial: cp210x: refactor flow-control handling USB: serial: cp210x: drop flow-control debugging USB: serial: cp210x: set terminal settings on open USB: serial: cp210x: clean up line-control handling USB: serial: cp210x: return early on unchanged termios USB: serial: mos7720: defer state restore to a workqueue USB: serial: mos7720: fix parallel-port state restore USB: serial: remove write wait queue USB: serial: digi_acceleport: fix write-wakeup deadlocks USB: serial: keyspan_pda: drop redundant usb-serial pointer USB: serial: keyspan_pda: use BIT() macro USB: serial: keyspan_pda: clean up comments and whitespace USB: serial: keyspan_pda: clean up xircom/entrega support USB: serial: keyspan_pda: add write-fifo support USB: serial: keyspan_pda: increase transmitter threshold ...
2020-12-11x86: Print ratio freq_max/freq_base used in frequency invariance calculationsGiovanni Gherdovich1-0/+1
The value freq_max/freq_base is a fundamental component of frequency invariance calculations. It may come from a variety of sources such as MSRs or ACPI data, tracking it down when troubleshooting a system could be non-trivial. It is worth saving it in the kernel logs. # dmesg | grep 'Estimated ratio of average max' [ 14.024036] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1289 Signed-off-by: Giovanni Gherdovich <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-12-11x86, sched: Use midpoint of max_boost and max_P for frequency invariance on ↵Giovanni Gherdovich1-0/+2
AMD EPYC Frequency invariant accounting calculations need the ratio freq_curr/freq_max, but freq_max is unknown as it depends on dynamic power allocation between cores: AMD EPYC CPUs implement "Core Performance Boost". Three candidates are considered to estimate this value: - maximum non-boost frequency - maximum boost frequency - the mid point between the above two Experimental data on an AMD EPYC Zen2 machine slightly favors the third option, which is applied with this patch. The analysis uses the ondemand cpufreq governor as baseline, and compares it with schedutil in a number of configurations. Using the freq_max value described above offers a moderate advantage in performance and efficiency: sugov-max (freq_max=max_boost) performs the worst on tbench: less throughput and reduced efficiency than the other invariant-schedutil options (see "Data Overview" below). Consider that tbench is generally a problematic case as no schedutil version currently is better than ondemand. sugov-P0 (freq_max=max_P) is the worst on dbench, while the other sugov's can surpass ondemand with less filesystem latency and slightly increased efficiency. 1. DATA OVERVIEW 2. DETAILED PERFORMANCE TABLES 3. POWER CONSUMPTION TABLE 1. DATA OVERVIEW ================ sugov-noinv : non-invariant schedutil governor sugov-max : invariant schedutil, freq_max=max_boost sugov-mid : invariant schedutil, freq_max=midpoint sugov-P0 : invariant schedutil, freq_max=max_P perfgov : performance governor driver : acpi_cpufreq machine : AMD EPYC 7742 (Zen2, aka "Rome"), dual socket, 128 cores / 256 threads, SATA SSD storage, 250G of memory, XFS filesystem Benchmarks are described in the next section. Tilde (~) means the value is the same as baseline. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ondemand perfgov sugov-noinv sugov-max sugov-mid sugov-P0 better if - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - PERFORMANCE RATIOS tbench 1.00 1.44 0.90 0.87 0.93 0.93 higher dbench 1.00 0.91 0.95 0.94 0.94 1.06 lower kernbench 1.00 0.93 ~ ~ ~ 0.97 lower gitsource 1.00 0.66 0.97 0.96 ~ 0.95 lower - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - PERFORMANCE-PER-WATT RATIOS tbench 1.00 1.16 0.84 0.84 0.88 0.85 higher dbench 1.00 1.03 1.02 1.02 1.02 0.93 higher kernbench 1.00 1.05 ~ ~ ~ ~ higher gitsource 1.00 1.46 1.04 1.04 ~ 1.05 higher 2. DETAILED PERFORMANCE TABLES ============================== Benchmark : tbench4 (i.e. dbench4 over the network, actually loopback) Varying parameter : number of clients Unit : MB/sec (higher is better) 5.9.0-ondemand (BASELINE) 5.9.0-perfgov 5.9.0-sugov-noinv - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Hmean 1 427.19 +- 0.16% ( ) 778.35 +- 0.10% ( 82.20%) 346.92 +- 0.14% ( -18.79%) Hmean 2 853.82 +- 0.09% ( ) 1536.23 +- 0.03% ( 79.93%) 694.36 +- 0.05% ( -18.68%) Hmean 4 1657.54 +- 0.12% ( ) 2938.18 +- 0.12% ( 77.26%) 1362.81 +- 0.11% ( -17.78%) Hmean 8 3301.87 +- 0.06% ( ) 5679.10 +- 0.04% ( 72.00%) 2693.35 +- 0.04% ( -18.43%) Hmean 16 6139.65 +- 0.05% ( ) 9498.81 +- 0.04% ( 54.71%) 4889.97 +- 0.17% ( -20.35%) Hmean 32 11170.28 +- 0.09% ( ) 17393.25 +- 0.08% ( 55.71%) 9104.55 +- 0.09% ( -18.49%) Hmean 64 19322.97 +- 0.17% ( ) 31573.91 +- 0.08% ( 63.40%) 18552.52 +- 0.40% ( -3.99%) Hmean 128 30383.71 +- 0.11% ( ) 37416.91 +- 0.15% ( 23.15%) 25938.70 +- 0.41% ( -14.63%) Hmean 256 31143.96 +- 0.41% ( ) 30908.76 +- 0.88% ( -0.76%) 29754.32 +- 0.24% ( -4.46%) Hmean 512 30858.49 +- 0.26% ( ) 38524.60 +- 1.19% ( 24.84%) 42080.39 +- 0.56% ( 36.37%) Hmean 1024 39187.37 +- 0.19% ( ) 36213.86 +- 0.26% ( -7.59%) 39555.98 +- 0.12% ( 0.94%) 5.9.0-sugov-max 5.9.0-sugov-mid 5.9.0-sugov-P0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Hmean 1 352.59 +- 1.03% ( -17.46%) 352.08 +- 0.75% ( -17.58%) 352.31 +- 1.48% ( -17.53%) Hmean 2 697.32 +- 0.08% ( -18.33%) 700.16 +- 0.20% ( -18.00%) 696.79 +- 0.06% ( -18.39%) Hmean 4 1369.88 +- 0.04% ( -17.35%) 1369.72 +- 0.07% ( -17.36%) 1365.91 +- 0.05% ( -17.59%) Hmean 8 2696.79 +- 0.04% ( -18.33%) 2711.06 +- 0.04% ( -17.89%) 2715.10 +- 0.61% ( -17.77%) Hmean 16 4725.03 +- 0.03% ( -23.04%) 4875.65 +- 0.02% ( -20.59%) 4953.05 +- 0.28% ( -19.33%) Hmean 32 9231.65 +- 0.10% ( -17.36%) 8704.89 +- 0.27% ( -22.07%) 10562.02 +- 0.36% ( -5.45%) Hmean 64 15364.27 +- 0.19% ( -20.49%) 17786.64 +- 0.15% ( -7.95%) 19665.40 +- 0.22% ( 1.77%) Hmean 128 42100.58 +- 0.13% ( 38.56%) 34946.28 +- 0.13% ( 15.02%) 38635.79 +- 0.06% ( 27.16%) Hmean 256 30660.23 +- 1.08% ( -1.55%) 32307.67 +- 0.54% ( 3.74%) 31153.27 +- 0.12% ( 0.03%) Hmean 512 24604.32 +- 0.14% ( -20.27%) 40408.50 +- 1.10% ( 30.95%) 38800.29 +- 1.23% ( 25.74%) Hmean 1024 35535.47 +- 0.28% ( -9.32%) 41070.38 +- 2.56% ( 4.81%) 31308.29 +- 2.52% ( -20.11%) Benchmark : dbench (filesystem stressor) Varying parameter : number of clients Unit : seconds (lower is better) NOTE-1: This dbench version measures the average latency of a set of filesystem operations, as we found the traditional dbench metric (throughput) to be misleading. NOTE-2: Due to high variability, we partition the original dataset and apply statistical bootrapping (a resampling method). Accuracy is reported in the form of 95% confidence intervals. 5.9.0-ondemand (BASELINE) 5.9.0-perfgov 5.9.0-sugov-noinv - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - SubAmean 1 98.79 +- 0.92 ( ) 83.36 +- 0.82 ( 15.62%) 84.82 +- 0.92 ( 14.14%) SubAmean 2 116.00 +- 0.89 ( ) 102.12 +- 0.77 ( 11.96%) 109.63 +- 0.89 ( 5.49%) SubAmean 4 149.90 +- 1.03 ( ) 132.12 +- 0.91 ( 11.86%) 143.90 +- 1.15 ( 4.00%) SubAmean 8 182.41 +- 1.13 ( ) 159.86 +- 0.93 ( 12.36%) 165.82 +- 1.03 ( 9.10%) SubAmean 16 237.83 +- 1.23 ( ) 219.46 +- 1.14 ( 7.72%) 229.28 +- 1.19 ( 3.59%) SubAmean 32 334.34 +- 1.49 ( ) 309.94 +- 1.42 ( 7.30%) 321.19 +- 1.36 ( 3.93%) SubAmean 64 576.61 +- 2.16 ( ) 540.75 +- 2.00 ( 6.22%) 551.27 +- 1.99 ( 4.39%) SubAmean 128 1350.07 +- 4.14 ( ) 1205.47 +- 3.20 ( 10.71%) 1280.26 +- 3.75 ( 5.17%) SubAmean 256 3444.42 +- 7.97 ( ) 3698.00 +- 27.43 ( -7.36%) 3494.14 +- 7.81 ( -1.44%) SubAmean 2048 39457.89 +- 29.01 ( ) 34105.33 +- 41.85 ( 13.57%) 39688.52 +- 36.26 ( -0.58%) 5.9.0-sugov-max 5.9.0-sugov-mid 5.9.0-sugov-P0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - SubAmean 1 85.68 +- 1.04 ( 13.27%) 84.16 +- 0.84 ( 14.81%) 83.99 +- 0.90 ( 14.99%) SubAmean 2 108.42 +- 0.95 ( 6.54%) 109.91 +- 1.39 ( 5.24%) 112.06 +- 0.91 ( 3.39%) SubAmean 4 136.90 +- 1.04 ( 8.67%) 137.59 +- 0.93 ( 8.21%) 136.55 +- 0.95 ( 8.91%) SubAmean 8 163.15 +- 0.96 ( 10.56%) 166.07 +- 1.02 ( 8.96%) 165.81 +- 0.99 ( 9.10%) SubAmean 16 224.86 +- 1.12 ( 5.45%) 223.83 +- 1.06 ( 5.89%) 230.66 +- 1.19 ( 3.01%) SubAmean 32 320.51 +- 1.38 ( 4.13%) 322.85 +- 1.49 ( 3.44%) 321.96 +- 1.46 ( 3.70%) SubAmean 64 553.25 +- 1.93 ( 4.05%) 554.19 +- 2.08 ( 3.89%) 562.26 +- 2.22 ( 2.49%) SubAmean 128 1264.35 +- 3.72 ( 6.35%) 1256.99 +- 3.46 ( 6.89%) 2018.97 +- 18.79 ( -49.55%) SubAmean 256 3466.25 +- 8.25 ( -0.63%) 3450.58 +- 8.44 ( -0.18%) 5032.12 +- 38.74 ( -46.09%) SubAmean 2048 39133.10 +- 45.71 ( 0.82%) 39905.95 +- 34.33 ( -1.14%) 53811.86 +-193.04 ( -36.38%) Benchmark : kernbench (kernel compilation) Varying parameter : number of jobs Unit : seconds (lower is better) 5.9.0-ondemand (BASELINE) 5.9.0-perfgov 5.9.0-sugov-noinv - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Amean 2 471.71 +- 26.61% ( ) 409.88 +- 16.99% ( 13.11%) 430.63 +- 0.18% ( 8.71%) Amean 4 211.87 +- 0.58% ( ) 194.03 +- 0.74% ( 8.42%) 215.33 +- 0.64% ( -1.63%) Amean 8 109.79 +- 1.27% ( ) 101.43 +- 1.53% ( 7.61%) 111.05 +- 1.95% ( -1.15%) Amean 16 59.50 +- 1.28% ( ) 55.61 +- 1.35% ( 6.55%) 59.65 +- 1.78% ( -0.24%) Amean 32 34.94 +- 1.22% ( ) 32.36 +- 1.95% ( 7.41%) 35.44 +- 0.63% ( -1.43%) Amean 64 22.58 +- 0.38% ( ) 20.97 +- 1.28% ( 7.11%) 22.41 +- 1.73% ( 0.74%) Amean 128 17.72 +- 0.44% ( ) 16.68 +- 0.32% ( 5.88%) 17.65 +- 0.96% ( 0.37%) Amean 256 16.44 +- 0.53% ( ) 15.76 +- 0.32% ( 4.18%) 16.76 +- 0.60% ( -1.93%) Amean 512 16.54 +- 0.21% ( ) 15.62 +- 0.41% ( 5.53%) 16.84 +- 0.85% ( -1.83%) 5.9.0-sugov-max 5.9.0-sugov-mid 5.9.0-sugov-P0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Amean 2 421.30 +- 0.24% ( 10.69%) 419.26 +- 0.15% ( 11.12%) 414.38 +- 0.33% ( 12.15%) Amean 4 217.81 +- 5.53% ( -2.80%) 211.63 +- 0.99% ( 0.12%) 208.43 +- 0.47% ( 1.63%) Amean 8 108.80 +- 0.43% ( 0.90%) 108.48 +- 1.44% ( 1.19%) 108.59 +- 3.08% ( 1.09%) Amean 16 58.84 +- 0.74% ( 1.12%) 58.37 +- 0.94% ( 1.91%) 57.78 +- 0.78% ( 2.90%) Amean 32 34.04 +- 2.00% ( 2.59%) 34.28 +- 1.18% ( 1.91%) 33.98 +- 2.21% ( 2.75%) Amean 64 22.22 +- 1.69% ( 1.60%) 22.27 +- 1.60% ( 1.38%) 22.25 +- 1.41% ( 1.47%) Amean 128 17.55 +- 0.24% ( 0.97%) 17.53 +- 0.94% ( 1.04%) 17.49 +- 0.43% ( 1.30%) Amean 256 16.51 +- 0.46% ( -0.40%) 16.48 +- 0.48% ( -0.19%) 16.44 +- 1.21% ( 0.00%) Amean 512 16.50 +- 0.35% ( 0.19%) 16.35 +- 0.42% ( 1.14%) 16.37 +- 0.33% ( 0.99%) Benchmark : gitsource (time to run the git unit test suite) Varying parameter : none Unit : seconds (lower is better) 5.9.0-ondemand (BASELINE) 5.9.0-perfgov 5.9.0-sugov-noinv - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Amean 1035.76 +- 0.30% ( ) 688.21 +- 0.04% ( 33.56%) 1003.85 +- 0.14% ( 3.08%) 5.9.0-sugov-max 5.9.0-sugov-mid 5.9.0-sugov-P0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Amean 995.82 +- 0.08% ( 3.86%) 1011.98 +- 0.03% ( 2.30%) 986.87 +- 0.19% ( 4.72%) 3. POWER CONSUMPTION TABLE ========================== Average power consumption (watts). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ondemand perfgov sugov-noinv sugov-max sugov-mid sugov-P0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - tbench4 227.25 281.83 244.17 236.76 241.50 247.99 dbench4 151.97 161.87 157.08 158.10 158.06 153.73 kernbench 162.78 167.22 162.90 164.19 164.65 164.72 gitsource 133.65 139.00 133.04 134.43 134.18 134.32 Signed-off-by: Giovanni Gherdovich <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-12-11x86, sched: Calculate frequency invariance for AMD systemsNathan Fontenot2-5/+76
This is the first pass in creating the ability to calculate the frequency invariance on AMD systems. This approach uses the CPPC highest performance and nominal performance values that range from 0 - 255 instead of a high and base frquency. This is because we do not have the ability on AMD to get a highest frequency value. On AMD systems the highest performance and nominal performance vaues do correspond to the highest and base frequencies for the system so using them should produce an appropriate ratio but some tweaking is likely necessary. Due to CPPC being initialized later in boot than when the frequency invariant calculation is currently made, I had to create a callback from the CPPC init code to do the calculation after we have CPPC data. Special thanks to "kernel test robot <[email protected]>" for reporting that compilation of drivers/acpi/cppc_acpi.c is conditional to CONFIG_ACPI_CPPC_LIB, not just CONFIG_ACPI. [ [email protected]: made safe under CPU hotplug, edited changelog. ] Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: Giovanni Gherdovich <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-12-10riscv: Fixed kernel test robot warningSouptick Joarder1-0/+2
Kernel test robot throws below warning - arch/riscv/kernel/asm-offsets.c:14:6: warning: no previous prototype for 'asm_offsets' [-Wmissing-prototypes] 14 | void asm_offsets(void) | ^~~~~~~~~~~ This patch should fixed it. Reported-by: kernel test robot <[email protected]> Signed-off-by: Souptick Joarder <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-12-10riscv: kernel: Drop unused clean ruleKefeng Wang1-2/+0
Signed-off-by: Kefeng Wang <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-12-10RISC-V: Define get_cycles64() regardless of M-modePalmer Dabbelt1-2/+2
The timer driver uses get_cycles64() unconditionally to obtain the current time. A recent refactoring lost the common definition for some configs, which is now the only one we need. Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems") Reported-by: kernel test robot <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-12-10riscv: provide memmove implementationNylon Chen4-4/+71
The memmove used by the kernel feature like KASAN. Signed-off-by: Nick Hu <[email protected]> Signed-off-by: Nick Hu <[email protected]> Signed-off-by: Nylon Chen <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-12-10Merge tag 'powerpc-5.10-6' of ↵Linus Torvalds2-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One commit to implement copy_from_kernel_nofault_allowed(), otherwise copy_from_kernel_nofault() can trigger warnings when accessing bad addresses in some configurations. Thanks to Christophe Leroy and Qian Cai" * tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
2020-12-11KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numberingCédric Le Goater1-0/+11
When the XIVE resources are allocated at the HW level, the VP structures describing the vCPUs of a guest are distributed among the chips to optimize the PowerBUS usage. For best performance, the guest vCPUs can be pinned to match the VP structure distribution. Currently, the VP identifiers are deduced from the vCPU id using the kvmppc_pack_vcpu_id() routine which is not incorrect but not optimal either. It VSMT is used, the result is not continuous and the constraints on HW resources described above can not be met. Signed-off-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/xive: Improve error reporting of OPAL callsCédric Le Goater1-12/+16
Introduce a vp_err() macro to standardize error reporting. Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/xive: Simplify xive_do_source_eoi()Cédric Le Goater1-39/+33
Previous patches removed the need of the first argument which was a hack for Firwmware EOI. Remove it and flatten the routine which has became simpler. Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FWCédric Le Goater7-36/+3
This flag was used to support the P9 DD1 and we have stopped supporting this CPU when DD2 came out. See skiboot commit: https://github.com/open-power/skiboot/commit/0b0d15e3c170 Also, remove eoi handler which is now unused. Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FWCédric Le Goater5-89/+11
This flag was used to support the PHB4 LSIs on P9 DD1 and we have stopped supporting this CPU when DD2 came out. See skiboot commit: https://github.com/open-power/skiboot/commit/0b0d15e3c170 Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUGCédric Le Goater6-19/+2
This flag was used to support the PHB4 LSIs on P9 DD1 and we have stopped supporting this CPU when DD2 came out. See skiboot commit: https://github.com/open-power/skiboot/commit/0b0d15e3c170 Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc: Increase NR_IRQS range to support more KVM guestsCédric Le Goater1-1/+1
PowerNV systems can handle up to 4K guests and 1M interrupt numbers per chip. Increase the range of allowed interrupts to support a larger number of guests. Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/xive: Add a debug_show handler to the XIVE irq_domainCédric Le Goater1-0/+58
Full state of the Linux interrupt descriptors can be dumped under debugfs when compiled with CONFIG_GENERIC_IRQ_DEBUGFS. Add support for the XIVE interrupt controller. Signed-off-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/xive: Add a name to the IRQ domainCédric Le Goater4-9/+9
We hope one day to handle multiple irq_domain in the XIVE driver. Start simple by setting the name using the DT node. Signed-off-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/xive: Introduce XIVE_IPI_HW_IRQCédric Le Goater2-5/+7
The XIVE driver deals with CPU IPIs in a peculiar way. Each CPU has its own XIVE IPI interrupt allocated at the HW level, for PowerNV, or at the hypervisor level for pSeries. In practice, these interrupts are not always used. pSeries/PowerVM prefers local doorbells for local threads since they are faster. On PowerNV, global doorbells are also preferred for the same reason. The mapping in the Linux is reduced to a single interrupt using HW interrupt number 0 and a custom irq_chip to handle EOI. This can cause performance issues in some benchmark (ipistorm) on multichip systems. Clarify the use of the 0 value, it will help in improving multichip support. Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/xive: Rename XIVE_IRQ_NO_EOI to show its a flagCédric Le Goater3-4/+4
This is a simple cleanup to identify easily all flags of the XIVE interrupt structure. The interrupts flagged with XIVE_IRQ_FLAG_NO_EOI are the escalations used to wake up vCPUs in KVM. They are handled very differently from the rest. Signed-off-by: Cédric Le Goater <[email protected]> Reviewed-by: Greg Kurz <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11KVM: PPC: Book3S HV: XIVE: Show detailed configuration in debug outputCédric Le Goater3-17/+82
This is useful to track allocation of the HW resources on per guest basis. Making sure IPIs are local to the chip of the vCPUs reduces rerouting between interrupt controllers and gives better performance in case of pinning. Checking the distribution of VP structures on the chips also helps in reducing PowerBUS traffic. [ clg: resurrected show_sources and reworked ouput ] Signed-off-by: Greg Kurz <[email protected]> Signed-off-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-10x86/ioapic: Cleanup the timer_works() irqflags messThomas Gleixner1-16/+6
Mark tripped over the creative irqflags handling in the IO-APIC timer delivery check which ends up doing: local_irq_save(flags); local_irq_enable(); local_irq_restore(flags); which triggered a new consistency check he's working on required for replacing the POPF based restore with a conditional STI. That code is a historical mess and none of this is needed. Make it straightforward use local_irq_disable()/enable() as that's all what is required. It is invoked from interrupt enabled code nowadays. Reported-by: Mark Rutland <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-10x86/apic/vector: Fix ordering in vector assignmentThomas Gleixner1-10/+14
Prarit reported that depending on the affinity setting the ' irq $N: Affinity broken due to vector space exhaustion.' message is showing up in dmesg, but the vector space on the CPUs in the affinity mask is definitely not exhausted. Shung-Hsi provided traces and analysis which pinpoints the problem: The ordering of trying to assign an interrupt vector in assign_irq_vector_any_locked() is simply wrong if the interrupt data has a valid node assigned. It does: 1) Try the intersection of affinity mask and node mask 2) Try the node mask 3) Try the full affinity mask 4) Try the full online mask Obviously #2 and #3 are in the wrong order as the requested affinity mask has to take precedence. In the observed cases #1 failed because the affinity mask did not contain CPUs from node 0. That made it allocate a vector from node 0, thereby breaking affinity and emitting the misleading message. Revert the order of #2 and #3 so the full affinity mask without the node intersection is tried before actually affinity is broken. If no node is assigned then only the full affinity mask and if that fails the full online mask is tried. Fixes: d6ffc6ac83b1 ("x86/vector: Respect affinity mask in irq descriptor") Reported-by: Prarit Bhargava <[email protected]> Reported-by: Shung-Hsi Yu <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Shung-Hsi Yu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-12-10mtd: nand: ecc-hamming: Move Hamming code to the generic NAND layerMiquel Raynal11-11/+11
Hamming ECC code might be later re-used by the SPI NAND layer. Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2020-12-10s390/mm: add support to allocate gigantic hugepages using CMAGerald Schaefer1-0/+3
Commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") added support for allocating gigantic hugepages using CMA, by specifying the hugetlb_cma= kernel parameter, which will disable any boot-time allocation of gigantic hugepages. This patch enables that option also for s390. Signed-off-by: Gerald Schaefer <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2020-12-10s390/crypto: add arch_get_random_long() supportHarald Freudenberger2-2/+113
The random longs to be pulled by arch_get_random_long() are prepared in an 4K buffer which is filled from the NIST 800-90 compliant s390 drbg. By default the random long buffer is refilled 256 times before the drbg itself needs a reseed. The reseed of the drbg is done with 32 bytes fetched from the high quality (but slow) trng which is assumed to deliver 100% entropy. So the 32 * 8 = 256 bits of entropy are spread over 256 * 4KB = 1MB serving 131072 arch_get_random_long() invocations before reseeded. How often the 4K random long buffer is refilled with the drbg before the drbg is reseeded can be adjusted. There is a module parameter 's390_arch_rnd_long_drbg_reseed' accessible via /sys/module/arch_random/parameters/rndlong_drbg_reseed or as kernel command line parameter arch_random.rndlong_drbg_reseed=<value> This parameter tells how often the drbg fills the 4K buffer before it is re-seeded by fresh entropy from the trng. A value of 16 results in reseeding the drbg at every 16 * 4 KB = 64 KB with 32 bytes of fresh entropy pulled from the trng. So a value of 16 would result in 256 bits entropy per 64 KB. A value of 256 results in 1MB of drbg output before a reseed of the drbg is done. So this would spread the 256 bits of entropy among 1MB. Setting this parameter to 0 forces the reseed to take place every time the 4K buffer is depleted, so the entropy rises to 256 bits entropy per 4K or 0.5 bit entropy per arch_get_random_long(). With setting this parameter to negative values all this effort is disabled, arch_get_random long() returns false and thus indicating that the arch_get_random_long() feature is disabled at all. arch_get_random_long() is used by random.c among others to provide an initial hash value to be mixed with the entropy pool on every random data pull. For about 64 bytes read from /dev/urandom there is one call to arch_get_random_long(). So these additional random long values count for performance of /dev/urandom with measurable but low penalty. Signed-off-by: Harald Freudenberger <[email protected]> Reviewed-by: Ingo Franzki <[email protected]> Reviewed-by: Juergen Christ <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2020-12-10file: Rename fcheck lookup_fd_rcuEric W. Biederman1-1/+1
Also remove the confusing comment about checking if a fd exists. I could not find one instance in the entire kernel that still matches the description or the reason for the name fcheck. The need for better names became apparent in the last round of discussion of this set of changes[1]. [1] https://lkml.kernel.org/r/CAHk-=wj8BQbgJFLa+J0e=iT-1qpmCRTbPAJ8gd6MJQ=kbRPqyQ@mail.gmail.com Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Eric W. Biederman <[email protected]>
2020-12-10x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabledXiaochen Shen1-4/+2
The MBA software controller (mba_sc) is a feedback loop which periodically reads MBM counters and tries to restrict the bandwidth below a user-specified value. It tags along the MBM counter overflow handler to do the updates with 1s interval in mbm_update() and update_mba_bw(). The purpose of mbm_update() is to periodically read the MBM counters to make sure that the hardware counter doesn't wrap around more than once between user samplings. mbm_update() calls __mon_event_count() for local bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count() instead when mba_sc is enabled. __mon_event_count() will not be called for local bandwidth updating in MBM counter overflow handler, but it is still called when reading MBM local bandwidth counter file 'mbm_local_bytes', the call path is as below: rdtgroup_mondata_show() mon_event_read() mon_event_count() __mon_event_count() In __mon_event_count(), m->chunks is updated by delta chunks which is calculated from previous MSR value (m->prev_msr) and current MSR value. When mba_sc is enabled, m->chunks is also updated in mbm_update() by mistake by the delta chunks which is calculated from m->prev_bw_msr instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in the mba_sc feedback loop. When reading MBM local bandwidth counter file, m->chunks was changed unexpectedly by mbm_bw_count(). As a result, the incorrect local bandwidth counter which calculated from incorrect m->chunks is shown to the user. Fix this by removing incorrect m->chunks updating in mbm_bw_count() in MBM counter overflow handler, and always calling __mon_event_count() in mbm_update() to make sure that the hardware local bandwidth counter doesn't wrap around. Test steps: # Run workload with aggressive memory bandwidth (e.g., 10 GB/s) git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat && make ./tools/membw/membw -c 0 -b 10000 --read # Enable MBA software controller mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl # Create control group c1 mkdir /sys/fs/resctrl/c1 # Set MB throttle to 6 GB/s echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata # Write PID of the workload to tasks file echo `pidof membw` > /sys/fs/resctrl/c1/tasks # Read local bytes counters twice with 1s interval, the calculated # local bandwidth is not as expected (approaching to 6 GB/s): local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` sleep 1 local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` echo "local b/w (bytes/s):" `expr $local_2 - $local_1` Before fix: local b/w (bytes/s): 11076796416 After fix: local b/w (bytes/s): 5465014272 Fixes: ba0f26d8529c (x86/intel_rdt/mba_sc: Prepare for feedback loop) Signed-off-by: Xiaochen Shen <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Tony Luck <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-12-10Merge tag 'kvmarm-fixes-5.10-5' of ↵Paolo Bonzini4-3/+31
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD kvm/arm64 fixes for 5.10, take #5 - Don't leak page tables on PTE update - Correctly invalidate TLBs on table to block transition - Only update permissions if the fault level matches the expected mapping size
2020-12-10Merge branch 'sparx5-next' of ↵Arnd Bergmann4-0/+414
https://github.com/microchip-ung/linux-upstream into arm/dt * 'sparx5-next' of https://github.com/microchip-ung/linux-upstream: arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-12-10KVM: s390: track synchronous pfault events in kvm_statChristian Borntraeger2-0/+3
Right now we do count pfault (pseudo page faults aka async page faults start and completion events). What we do not count is, if an async page fault would have been possible by the host, but it was disabled by the guest (e.g. interrupts off, pfault disabled, secure execution....). Let us count those as well in the pfault_sync counter. Signed-off-by: Christian Borntraeger <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Cornelia Huck <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/cacheinfo: Print correct cache-sibling map/list for L2 cacheGautham R. Shenoy2-10/+24
On POWER platforms where only some groups of threads within a core share the L2-cache (indicated by the ibm,thread-groups device-tree property), we currently print the incorrect shared_cpu_map/list for L2-cache in the sysfs. This patch reports the correct shared_cpu_map/list on such platforms. Example: On a platform with "ibm,thread-groups" set to 00000001 00000002 00000004 00000000 00000002 00000004 00000006 00000001 00000003 00000005 00000007 00000002 00000002 00000004 00000000 00000002 00000004 00000006 00000001 00000003 00000005 00000007 This indicates that threads {0,2,4,6} in the core share the L2-cache and threads {1,3,5,7} in the core share the L2 cache. However, without the patch, the shared_cpu_map/list for L2 for CPUs 0, 1 is reported in the sysfs as follows: /sys/devices/system/cpu/cpu0/cache/index2/shared_cpu_list:0-7 /sys/devices/system/cpu/cpu0/cache/index2/shared_cpu_map:000000,000000ff /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_list:0-7 /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map:000000,000000ff With the patch, the shared_cpu_map/list for L2 cache for CPUs 0, 1 is correctly reported as follows: /sys/devices/system/cpu/cpu0/cache/index2/shared_cpu_list:0,2,4,6 /sys/devices/system/cpu/cpu0/cache/index2/shared_cpu_map:000000,00000055 /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_list:1,3,5,7 /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map:000000,000000aa This patch also defines cpu_l2_cache_mask() for !CONFIG_SMP case. Signed-off-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/smp: Add support detecting thread-groups sharing L2 cacheGautham R. Shenoy2-5/+55
On POWER systems, groups of threads within a core sharing the L2-cache can be indicated by the "ibm,thread-groups" property array with the identifier "2". This patch adds support for detecting this, and when present, populate the populating the cpu_l2_cache_mask of every CPU to the core-siblings which share L2 with the CPU as specified in the by the "ibm,thread-groups" property array. On a platform with the following "ibm,thread-group" configuration 00000001 00000002 00000004 00000000 00000002 00000004 00000006 00000001 00000003 00000005 00000007 00000002 00000002 00000004 00000000 00000002 00000004 00000006 00000001 00000003 00000005 00000007 Without this patch, the sched-domain hierarchy for CPUs 0,1 would be CPU0 attaching sched-domain(s): domain-0: span=0,2,4,6 level=SMT domain-1: span=0-7 level=CACHE domain-2: span=0-15,24-39,48-55 level=MC domain-3: span=0-55 level=DIE CPU1 attaching sched-domain(s): domain-0: span=1,3,5,7 level=SMT domain-1: span=0-7 level=CACHE domain-2: span=0-15,24-39,48-55 level=MC domain-3: span=0-55 level=DIE The CACHE domain at 0-7 is incorrect since the ibm,thread-groups sub-array [00000002 00000002 00000004 00000000 00000002 00000004 00000006 00000001 00000003 00000005 00000007] indicates that L2 (Property "2") is shared only between the threads of a single group. There are "2" groups of threads where each group contains "4" threads each. The groups being {0,2,4,6} and {1,3,5,7}. With this patch, the sched-domain hierarchy for CPUs 0,1 would be CPU0 attaching sched-domain(s): domain-0: span=0,2,4,6 level=SMT domain-1: span=0-15,24-39,48-55 level=MC domain-2: span=0-55 level=DIE CPU1 attaching sched-domain(s): domain-0: span=1,3,5,7 level=SMT domain-1: span=0-15,24-39,48-55 level=MC domain-2: span=0-55 level=DIE The CACHE domain with span=0,2,4,6 for CPU 0 (span=1,3,5,7 for CPU 1 resp.) gets degenerated into the SMT domain. Furthermore, the last-level-cache domain gets correctly set to the SMT sched-domain. Signed-off-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/smp: Rename init_thread_group_l1_cache_map() to make it genericGautham R. Shenoy1-7/+10
init_thread_group_l1_cache_map() initializes the per-cpu cpumask thread_group_l1_cache_map with the core-siblings which share L1 cache with the CPU. Make this function generic to the cache-property (L1 or L2) and update a suitable mask. This is a preparatory patch for the next patch where we will introduce discovery of thread-groups that share L2-cache. No functional change. Signed-off-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/smp: Rename cpu_l1_cache_map as thread_group_l1_cache_mapGautham R. Shenoy1-7/+7
On platforms which have the "ibm,thread-groups" property, the per-cpu variable cpu_l1_cache_map keeps a track of which group of threads within the same core share the L1 cache, Instruction and Data flow. This patch renames the variable to "thread_group_l1_cache_map" to make it consistent with a subsequent patch which will introduce thread_group_l2_cache_map. This patch introduces no functional change. Signed-off-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/smp: Parse ibm,thread-groups with multiple propertiesGautham R. Shenoy1-61/+113
The "ibm,thread-groups" device-tree property is an array that is used to indicate if groups of threads within a core share certain properties. It provides details of which property is being shared by which groups of threads. This array can encode information about multiple properties being shared by different thread-groups within the core. Example: Suppose, "ibm,thread-groups" = [1,2,4,8,10,12,14,9,11,13,15,2,2,4,8,10,12,14,9,11,13,15] This can be decomposed up into two consecutive arrays: a) [1,2,4,8,10,12,14,9,11,13,15] b) [2,2,4,8,10,12,14,9,11,13,15] where in, a) provides information of Property "1" being shared by "2" groups, each with "4" threads each. The "ibm,ppc-interrupt-server#s" of the first group is {8,10,12,14} and the "ibm,ppc-interrupt-server#s" of the second group is {9,11,13,15}. Property "1" is indicative of the thread in the group sharing L1 cache, translation cache and Instruction Data flow. b) provides information of Property "2" being shared by "2" groups, each group with "4" threads. The "ibm,ppc-interrupt-server#s" of the first group is {8,10,12,14} and the "ibm,ppc-interrupt-server#s" of the second group is {9,11,13,15}. Property "2" indicates that the threads in each group share the L2-cache. The existing code assumes that the "ibm,thread-groups" encodes information about only one property. Hence even on platforms which encode information about multiple properties being shared by the corresponding groups of threads, the current code will only pick the first one. (In the above example, it will only consider [1,2,4,8,10,12,14,9,11,13,15] but not [2,2,4,8,10,12,14,9,11,13,15]). This patch extends the parsing support on platforms which encode information about multiple properties being shared by the corresponding groups of threads. Signed-off-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/watchpoint: Workaround P10 DD1 issue with VSX-32 byte instructionsRavi Bangoria1-2/+65
POWER10 DD1 has an issue where it generates watchpoint exceptions when it shouldn't. The conditions where this occur are: - octword op - ending address of DAWR range is less than starting address of op - those addresses need to be in the same or in two consecutive 512B blocks - 'op address + 64B' generates an address that has a carry into bit 52 (crosses 2K boundary) Handle such spurious exception by considering them as extraneous and emulating/single-steeping instruction without generating an event. [ravi: Fixed build warning reported by [email protected]] Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/sstep: Add testcases for VSX vector paired load/store instructionsBalamuruhan S1-0/+270
Add testcases for VSX vector paired load/store instructions. Sample o/p: emulate_step_test: lxvp : PASS emulate_step_test: stxvp : PASS emulate_step_test: lxvpx : PASS emulate_step_test: stxvpx : PASS emulate_step_test: plxvp : PASS emulate_step_test: pstxvp : PASS Signed-off-by: Balamuruhan S <[email protected]> Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/ppc-opcode: Add encoding macros for VSX vector paired instructionsBalamuruhan S1-0/+13
Add instruction encodings, DQ, D0, D1 immediate, XTP, XSP operands as macros for new VSX vector paired instructions, * Load VSX Vector Paired (lxvp) * Load VSX Vector Paired Indexed (lxvpx) * Prefixed Load VSX Vector Paired (plxvp) * Store VSX Vector Paired (stxvp) * Store VSX Vector Paired Indexed (stxvpx) * Prefixed Store VSX Vector Paired (pstxvp) Suggested-by: Naveen N. Rao <[email protected]> Signed-off-by: Balamuruhan S <[email protected]> Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/sstep: Support VSX vector paired storage access instructionsBalamuruhan S1-21/+129
VSX Vector Paired instructions loads/stores an octword (32 bytes) from/to storage into two sequential VSRs. Add emulation support for these new instructions: * Load VSX Vector Paired (lxvp) * Load VSX Vector Paired Indexed (lxvpx) * Prefixed Load VSX Vector Paired (plxvp) * Store VSX Vector Paired (stxvp) * Store VSX Vector Paired Indexed (stxvpx) * Prefixed Store VSX Vector Paired (pstxvp) [kernel test robot reported a build failure] Reported-by: kernel test robot <[email protected]> Suggested-by: Naveen N. Rao <[email protected]> Signed-off-by: Balamuruhan S <[email protected]> Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/sstep: Cover new VSX instructions under CONFIG_VSXRavi Bangoria1-1/+3
Recently added Power10 prefixed VSX instruction are included unconditionally in the kernel. If they are executed on a machine without VSX support, it might create issues. Fix that. Also fix one mnemonics spelling mistake in comment. Fixes: 50b80a12e4cc ("powerpc sstep: Add support for prefixed load/stores") Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11powerpc/sstep: Emulate prefixed instructions only when CPU_FTR_ARCH_31 is setBalamuruhan S1-0/+6
Unconditional emulation of prefixed instructions will allow emulation of them on Power10 predecessors which might cause issues. Restrict that. Fixes: 3920742b92f5 ("powerpc sstep: Add support for prefixed fixed-point arithmetic") Fixes: 50b80a12e4cc ("powerpc sstep: Add support for prefixed load/stores") Signed-off-by: Balamuruhan S <[email protected]> Signed-off-by: Ravi Bangoria <[email protected]> Reviewed-by: Sandipan Das <[email protected]> Reviewed-by: Daniel Axtens <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-10s390/gmap: make gmap memcg awareChristian Borntraeger1-15/+15
gmap allocations can be attributed to a process. Signed-off-by: Christian Borntraeger <[email protected]> Acked-by: Heiko Carstens <[email protected]> Acked-by: Janosch Frank <[email protected]> Acked-by: Cornelia Huck <[email protected]>
2020-12-10KVM: s390: Add memcg accounting to KVM allocationsChristian Borntraeger7-27/+27
Almost all kvm allocations in the s390x KVM code can be attributed to the process that triggers the allocation (in other words, no global allocation for other guests). This will help the memcg controller to make the right decisions. Signed-off-by: Christian Borntraeger <[email protected]> Acked-by: Janosch Frank <[email protected]> Acked-by: Cornelia Huck <[email protected]>
2020-12-10powerpc/64s: Remove idle workaround code from restore_cpu_cpufeaturesNicholas Piggin1-20/+1
Idle code no longer uses the .cpu_restore CPU operation to restore SPRs, so this workaround is no longer required. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-10powerpc/perf: Exclude kernel samples while counting events in user space.Athira Rajeev1-0/+10
Perf event attritube supports exclude_kernel flag to avoid sampling/profiling in supervisor state (kernel). Based on this event attr flag, Monitor Mode Control Register bit is set to freeze on supervisor state. But sometimes (due to hardware limitation), Sampled Instruction Address Register (SIAR) locks on to kernel address even when freeze on supervisor is set. Patch here adds a check to drop those samples. Cc: [email protected] Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.