aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2019-11-26xtensa: use named assembly arguments in cmpxchg.hMax Filippov1-35/+35
Numeric assembly arguments are hard to understand and assembly code that uses them is hard to modify. Use named arguments in __cmpxchg_u32 and xchg_u32. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-26xtensa: use "m" constraint instead of "a" in atomic.h assemblyMax Filippov1-24/+28
Use "m" constraint instead of "r" for the address, as "m" allows compiler to access adjacent locations using base + offset, while "r" requires updating the base register every time. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-26xtensa: use named assembly arguments in atomic.hMax Filippov1-60/+60
Numeric assembly arguments are hard to understand and assembly code that uses them is hard to modify. Use named arguments in ATOMIC_OP, ATOMIC_OP_RETURN and ATOMIC_FETCH_OP macros. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-26xtensa: use "m" constraint instead of "a" in bitops.h assemblyMax Filippov1-8/+10
Use "m" constraint instead of "r" for the address, as "m" allows compiler to access adjacent locations using base + offset, while "r" requires updating the base register every time. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-26xtensa: use named assembly arguments in bitops.hMax Filippov1-28/+28
Numeric assembly arguments are hard to understand and assembly code that uses them is hard to modify. Use named arguments in BIT_OP and TEST_AND_BIT_OP macros. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-26xtensa: use macros to generate *_bit and test_and_*_bit functionsMax Filippov1-229/+92
Parameterize macros with function name, opcode and inversion pattern. This reduces code duplication removing 2/3 of definitions. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-26xtensa: use "m" constraint instead of "a" in uaccess.h assemblyMax Filippov1-8/+8
Use "m" constraint instead of "r" for the address, as "m" allows compiler to access adjacent locations using base + offset, while "r" requires updating the base register every time. Use %[mem] * 0 + v to replace offset part of %[mem] expansion with v. It is impossible to change address alignment through the offset part on xtensa, so just ignore offset in alignment checks. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-26xtensa: merge .fixup with .textMax Filippov1-5/+1
Section .fixup contains pieces of code, merge it with the rest of the .text section. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-26xtensa: add XIP kernel supportMax Filippov10-5/+257
XIP (eXecute In Place) kernel image is the image that can be run directly from ROM, using RAM only for writable data. XIP xtensa kernel differs from regular xtensa kernel in the following ways: - it has exception/IRQ vectors merged into text section. No vectors relocation takes place at kernel startup. - .data/.bss location must be specified in the kernel configuration, its content is copied there in the _startup function. - .init.text is merged with the rest of text and is executed from ROM. - when MMU is used the virtual address where the kernel will be mapped must be specified in the kernel configuration. It may be in the KSEG or in the KIO, __pa macro is adjusted to be able to handle both. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-11-26asm-generic: Make msi.h a mandatory include/asm headerMichal Simek7-7/+0
msi.h is generic for all architectures except x86, which has its own version. Enabling MSI by adding msi.h to every architecture's Kbuild is just an additional step which doesn't need to be done. Make msi.h mandatory in the asm-generic/Kbuild so we don't have to do it for each architecture. Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/r/c991669e29a79b1a8e28c3b4b3a125801a693de8.1571983829.git.michal.simek@xilinx.com Tested-by: Paul Walmsley <paul.walmsley@sifive.com> # build only, rv32/rv64 Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv
2019-11-26Merge branch 'x86-iopl-for-linus' of ↵Linus Torvalds23-466/+553
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 iopl updates from Ingo Molnar: "This implements a nice simplification of the iopl and ioperm code that Thomas Gleixner discovered: we can implement the IO privilege features of the iopl system call by using the IO permission bitmap in permissive mode, while trapping CLI/STI/POPF/PUSHF uses in user-space if they change the interrupt flag. This implements that feature, with testing facilities and related cleanups" [ "Simplification" may be an over-statement. The main goal is to avoid the cli/sti of iopl by effectively implementing the IO port access parts of iopl in terms of ioperm. This may end up not workign well in case people actually depend on cli/sti being available, or if there are mixed uses of iopl and ioperm. We will see.. - Linus ] * 'x86-iopl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/ioperm: Fix use of deprecated config option x86/entry/32: Clarify register saving in __switch_to_asm() selftests/x86/iopl: Extend test to cover IOPL emulation x86/ioperm: Extend IOPL config to control ioperm() as well x86/iopl: Remove legacy IOPL option x86/iopl: Restrict iopl() permission scope x86/iopl: Fixup misleading comment selftests/x86/ioperm: Extend testing so the shared bitmap is exercised x86/ioperm: Share I/O bitmap if identical x86/ioperm: Remove bitmap if all permissions dropped x86/ioperm: Move TSS bitmap update to exit to user work x86/ioperm: Add bitmap sequence number x86/ioperm: Move iobitmap data into a struct x86/tss: Move I/O bitmap data into a seperate struct x86/io: Speedup schedule out of I/O bitmap user x86/ioperm: Avoid bitmap allocation if no permissions are set x86/ioperm: Simplify first ioperm() invocation logic x86/iopl: Cleanup include maze x86/tss: Fix and move VMX BUILD_BUG_ON() x86/cpu: Unify cpu_init() ...
2019-11-26sysctl: Remove the sysctl system callEric W. Biederman32-32/+0
This system call has been deprecated almost since it was introduced, and in a survey of the linux distributions I can no longer find any of them that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find that anyone might care is that a few of the defconfigs in the kernel enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414 defconfigs in the kernel, so I suspect this symbols presence is simply because it is harmless to include rather than because it is necessary. As there appear to be no users of the sysctl system call, remove the code. As this removes one of the few uses of the internal kernel mount of proc I hope this allows for even more simplifications of the proc filesystem. Cc: Alex Smith <alex.smith@imgtec.com> Cc: Anders Berg <anders.berg@lsi.com> Cc: Apelete Seketeli <apelete@seketeli.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chee Nouk Phoon <cnphoon@altera.com> Cc: Chris Zankel <chris@zankel.net> Cc: Christian Ruppert <christian.ruppert@abilis.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Helge Deller <deller@gmx.de> Cc: Hongliang Tao <taohl@lemote.com> Cc: Hua Yan <yanh@lemote.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Jun Nie <jun.nie@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Kevin Wells <kevin.wells@nxp.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Olof Johansson <olof@lixom.net> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Scott Telford <stelford@cadence.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Tanmay Inamdar <tinamdar@apm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-11-26Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds159-1166/+1148
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - Cross-arch changes to move the linker sections for NOTES and EXCEPTION_TABLE into the RO_DATA area, where they belong on most architectures. (Kees Cook) - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to trap jumps into the middle of those padding areas instead of sliding execution. (Kees Cook) - A thorough cleanup of symbol definitions within x86 assembler code. The rather randomly named macros got streamlined around a (hopefully) straightforward naming scheme: SYM_START(name, linkage, align...) SYM_END(name, sym_type) SYM_FUNC_START(name) SYM_FUNC_END(name) SYM_CODE_START(name) SYM_CODE_END(name) SYM_DATA_START(name) SYM_DATA_END(name) etc - with about three times of these basic primitives with some label, local symbol or attribute variant, expressed via postfixes. No change in functionality intended. (Jiri Slaby) - Misc other changes, cleanups and smaller fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) x86/entry/64: Remove pointless jump in paranoid_exit x86/entry/32: Remove unused resume_userspace label x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o m68k: Convert missed RODATA to RO_DATA x86/vmlinux: Use INT3 instead of NOP for linker fill bytes x86/mm: Report actual image regions in /proc/iomem x86/mm: Report which part of kernel image is freed x86/mm: Remove redundant address-of operators on addresses xtensa: Move EXCEPTION_TABLE to RO_DATA segment powerpc: Move EXCEPTION_TABLE to RO_DATA segment parisc: Move EXCEPTION_TABLE to RO_DATA segment microblaze: Move EXCEPTION_TABLE to RO_DATA segment ia64: Move EXCEPTION_TABLE to RO_DATA segment h8300: Move EXCEPTION_TABLE to RO_DATA segment c6x: Move EXCEPTION_TABLE to RO_DATA segment arm64: Move EXCEPTION_TABLE to RO_DATA segment alpha: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Actually use _etext for the end of the text segment vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA ...
2019-11-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds8-139/+202
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "These are the fixes left over from the v5.4 cycle: - Various low level 32-bit entry code fixes and improvements by Andy Lutomirski, Peter Zijlstra and Thomas Gleixner. - Fix 32-bit Xen PV breakage, by Jan Beulich" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/32: Fix FIXUP_ESPFIX_STACK with user CR3 x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel selftests/x86/mov_ss_trap: Fix the SYSENTER test x86/entry/32: Fix NMI vs ESPFIX x86/entry/32: Unwind the ESPFIX stack earlier on exception entry x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALL x86/entry/32: Use %ss segment where required x86/entry/32: Fix IRET exception x86/cpu_entry_area: Add guard page for entry stack on 32bit x86/pti/32: Size initial_page_table correctly x86/doublefault/32: Fix stack canaries in the double fault handler x86/xen/32: Simplify ring check in xen_iret_crit_fixup() x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout x86/stackframe/32: Repair 32-bit Xen PV
2019-11-26Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-2/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PTI updates from Ingo Molnar: "Fix reporting bugs of the MDS and TAA mitigation status, if one or both are set via a boot option. No change to mitigation behavior intended" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation: Fix redundant MDS mitigation message x86/speculation: Fix incorrect MDS/TAA mitigation status
2019-11-26Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds7-110/+323
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "UV platform updates (with a 'hubless' variant) and Jailhouse updates for better UART support" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/jailhouse: Only enable platform UARTs if available x86/jailhouse: Improve setup data version comparison x86/platform/uv: Account for UV Hubless in is_uvX_hub Ops x86/platform/uv: Check EFI Boot to set reboot type x86/platform/uv: Decode UVsystab Info x86/platform/uv: Add UV Hubbed/Hubless Proc FS Files x86/platform/uv: Setup UV functions for Hubless UV Systems x86/platform/uv: Add return code to UV BIOS Init function x86/platform/uv: Return UV Hubless System Type x86/platform/uv: Save OEM_ID from ACPI MADT probe
2019-11-26Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds8-309/+229
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "The main changes in this cycle were: - A PAT series from Davidlohr Bueso, which simplifies the memtype rbtree by using the interval tree helpers. (There's more cleanups in this area queued up, but they didn't make the merge window.) - Also flip over CONFIG_X86_5LEVEL to default-y. This might draw in a few more testers, as all the major distros are going to have 5-level paging enabled by default in their next iterations. - Misc cleanups" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/pat: Rename pat_rbtree.c to pat_interval.c x86/mm/pat: Drop the rbt_ prefix from external memtype calls x86/mm/pat: Do not pass 'rb_root' down the memtype tree helper functions x86/mm/pat: Convert the PAT tree to a generic interval tree x86/mm: Clean up the pmd_read_atomic() comments x86/mm: Fix function name typo in pmd_read_atomic() comment x86/cpu: Clean up intel_tlb_table[] x86/mm: Enable 5-level paging support by default
2019-11-26Merge branch 'x86-kdump-for-linus' of ↵Linus Torvalds7-178/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 kdump updates from Ingo Molnar: "This solves a kdump artifact where encrypted memory contents are dumped, instead of unencrypted ones. The solution also happens to simplify the kdump code, to everyone's delight" * 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/crash: Align function arguments on opening braces x86/kdump: Remove the backup region handling x86/kdump: Always reserve the low 1M when the crashkernel option is specified x86/crash: Add a forward declaration of struct kimage
2019-11-26Merge branch 'x86-hyperv-for-linus' of ↵Linus Torvalds5-4/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 hyperv updates from Ingo Molnar: "Misc updates to the hyperv guest code: - Rework clockevents initialization to better support hibernation - Allow guests to enable InvariantTSC - Micro-optimize send_ipi_one" * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Initialize clockevents earlier in CPU onlining x86/hyperv: Allow guests to enable InvariantTSC x86/hyperv: Micro-optimize send_ipi_one()
2019-11-26Merge branch 'x86-entry-for-linus' of ↵Linus Torvalds7-36/+81
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 syscall entry updates from Ingo Molnar: "These changes relate to the preparatory cleanup of syscall function type signatures - to fix indirect call mismatches with Control-Flow Integrity (CFI) checking. No change in behavior intended" * 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use the correct function type for native_set_fixmap() syscalls/x86: Fix function types in COND_SYSCALL syscalls/x86: Use the correct function type for sys_ni_syscall syscalls/x86: Use COMPAT_SYSCALL_DEFINE0 for IA32 (rt_)sigreturn syscalls/x86: Wire up COMPAT_SYSCALL_DEFINE0 syscalls/x86: Use the correct function type in SYSCALL_DEFINE0
2019-11-26Merge branches 'x86-cpu-for-linus' and 'x86-fpu-for-linus' of ↵Linus Torvalds15-48/+94
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu and fpu updates from Ingo Molnar: - math-emu fixes - CPUID updates - sanity-check RDRAND output to see whether the CPU at least pretends to produce random data - various unaligned-access across cachelines fixes in preparation of hardware level split-lock detection - fix MAXSMP constraints to not allow !CPUMASK_OFFSTACK kernels with larger than 512 NR_CPUS - misc FPU related cleanups * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Align the x86_capability array to size of unsigned long x86/cpu: Align cpu_caps_cleared and cpu_caps_set to unsigned long x86/umip: Make the comments vendor-agnostic x86/Kconfig: Rename UMIP config parameter x86/Kconfig: Enforce limit of 512 CPUs with MAXSMP and no CPUMASK_OFFSTACK x86/cpufeatures: Add feature bit RDPRU on AMD x86/math-emu: Limit MATH_EMULATION to 486SX compatibles x86/math-emu: Check __copy_from_user() result x86/rdrand: Sanity-check RDRAND output * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Use XFEATURE_FP/SSE enum values instead of hardcoded numbers x86/fpu: Shrink space allocated for xstate_comp_offsets x86/fpu: Update stale variable name in comment
2019-11-26Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds14-17/+152
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "The main changes were: - Extend the boot protocol to allow future extensions without hitting the setup_header size limit. - Add quirk to devicetree systems to disable the RTC unless it's listed as a supported device. - Fix ld.lld linker pedantry" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Introduce setup_indirect x86/boot: Introduce kernel_info.setup_type_max x86/boot: Introduce kernel_info x86/init: Allow DT configured systems to disable RTC at boot time x86/realmode: Explicitly set entry point via ENTRY in linker script
2019-11-26Merge branches 'core-objtool-for-linus', 'x86-cleanups-for-linus' and ↵Linus Torvalds19-2017/+22
'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 objtool, cleanup, and apic updates from Ingo Molnar: "Objtool: - Fix a gawk 5.0 incompatibility in gen-insn-attr-x86.awk. Most distros are still on gawk 4.2.x. Cleanup: - Misc cleanups, plus the removal of obsolete code such as Calgary IOMMU support, which code hasn't seen any real testing in a long time and there's no known users left. apic: - Two changes: a cleanup and a fix for an (old) race for oneshot threaded IRQ handlers" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/insn: Fix awk regexp warnings * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove unused asm/rio.h x86: Fix typos in comments x86/pci: Remove #ifdef __KERNEL__ guard from <asm/pci.h> x86/pci: Remove pci_64.h x86: Remove the calgary IOMMU driver x86/apic, x86/uprobes: Correct parameter names in kernel-doc comments x86/kdump: Remove the unused crash_copy_backup_region() x86/nmi: Remove stale EDAC include leftover * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioapic: Rename misnamed functions x86/ioapic: Prevent inconsistent state when moving an interrupt
2019-11-26x86/insn: Add some more Intel instructions to the opcode mapAdrian Hunter1-12/+32
Add to the opcode map the following instructions: v4fmaddps v4fmaddss v4fnmaddps v4fnmaddss vaesdec vaesdeclast vaesenc vaesenclast vcvtne2ps2bf16 vcvtneps2bf16 vdpbf16ps gf2p8affineinvqb vgf2p8affineinvqb gf2p8affineqb vgf2p8affineqb gf2p8mulb vgf2p8mulb vp2intersectd vp2intersectq vp4dpwssd vp4dpwssds vpclmulqdq vpcompressb vpcompressw vpdpbusd vpdpbusds vpdpwssd vpdpwssds vpexpandb vpexpandw vpopcntb vpopcntd vpopcntq vpopcntw vpshldd vpshldq vpshldvd vpshldvq vpshldvw vpshldw vpshrdd vpshrdq vpshrdvd vpshrdvq vpshrdvw vpshrdw vpshufbitqmb For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test e.g. $ perf test -v "new " 2>&1 | grep -i 'v4fmaddps' Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a 20 v4fmaddps (%rax),%zmm0,%zmm4 Decoded ok: 67 62 f2 7f 48 9a 20 v4fmaddps (%eax),%zmm0,%zmm4 Decoded ok: 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%rax,%rcx,8),%zmm0,%zmm4 Decoded ok: 67 62 f2 7f 48 9a a4 c8 78 56 34 12 v4fmaddps 0x12345678(%eax,%ecx,8),%zmm0,%zmm4 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191125125044.31879-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo495-8234/+25360
To pick up BPF changes we'll need. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26Merge branch 'acpi-mm'Rafael J. Wysocki9-25/+141
* acpi-mm: ACPI: HMAT: use %u instead of %d to print u32 values ACPI: NUMA: HMAT: fix a section mismatch ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device ACPI: NUMA: HMAT: Register HMAT at device_initcall level device-dax: Add a driver for "hmem" devices dax: Fix alloc_dax_region() compile warning lib: Uplevel the pmem "region" ida to a global allocator x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP arm/efi: EFI soft reservation to memblock x86/efi: EFI soft reservation to E820 enumeration efi: Common enable/disable infrastructure for EFI soft reservation x86/efi: Push EFI_MEMMAP check into leaf routines efi: Enumerate EFI_MEMORY_SP ACPI: NUMA: Establish a new drivers/acpi/numa/ directory
2019-11-26Merge branch 'pm-cpufreq'Rafael J. Wysocki41-61/+182
* pm-cpufreq: (23 commits) cpufreq: Register drivers only after CPU devices have been registered cpufreq: Add NULL checks to show() and store() methods of cpufreq cpufreq: intel_pstate: Fix plain int as pointer warning from sparse cpufreq: sun50i: Fix CPU speed bin detection cpufreq: powernv: fix stack bloat and hard limit on number of CPUs cpufreq: Clarify the comment in cpufreq_set_policy() cpufreq: vexpress-spc: find and skip duplicates when merging frequencies cpufreq: vexpress-spc: use macros instead of hardcoded values for cluster ids cpufreq: s3c64xx: Remove pointless NULL check in s3c64xx_cpufreq_driver_init cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default speed grade value cpufreq: vexpress-spc: fix some coding style issues cpufreq: vexpress-spc: remove lots of debug messages cpufreq: vexpress-spc: drop unnessary cpufreq_arm_bL_ops abstraction cpufreq: merge arm_big_little and vexpress-spc cpufreq: scpi: remove stale/outdated comment about the driver ARM: dts: Add OPP-V2 table for AM3517 cpufreq: ti-cpufreq: Add support for AM3517 ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517 ...
2019-11-26Merge branch 'pm-cpuidle'Rafael J. Wysocki2-3/+3
* pm-cpuidle: cpuidle: Pass exit latency limit to cpuidle_use_deepest_state() cpuidle: Allow idle injection to apply exit latency limit cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks cpuidle: teo: Avoid code duplication in conditionals cpuidle: teo: Avoid using "early hits" incorrectly cpuidle: teo: Exclude cpuidle overhead from computations cpuidle: Use nanoseconds as the unit of time cpuidle: Consolidate disabled state checks ACPI: processor_idle: Skip dummy wait if kernel is in guest cpuidle: Do not unset the driver if it is there already cpuidle: teo: Fix "early hits" handling for disabled idle states cpuidle: teo: Consider hits and misses metrics of disabled states cpuidle: teo: Rename local variable in teo_select() cpuidle: teo: Ignore disabled idle states that are too deep
2019-11-25Merge tag 'spi-v5.5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Lots of stuff going on in the core for SPI this time around, the two big changes both being around time in different forms: - A rework of delay times from Alexandru Ardelean which makes the ways in which they are specified more consistent between drivers so that what's available to clients is less dependent on the hardware implementation. - Support for PTP timestamping of transfers from Vladimir Oltean, useful for use with precision clocks with SPI control interfaces. - Big cleanups for the Atmel, PXA2xx and Zynq QSPI drivers" * tag 'spi-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits) dt-bindings: spi: Convert stm32 QSPI bindings to json-schema spi: pic32: Retire dma_request_slave_channel_compat() spi: Fix Kconfig indentation spi: mediatek: add SPI_CS_HIGH support spi: st-ssc4: add missed pm_runtime_disable spi: tegra20-slink: add missed clk_unprepare spi: tegra20-slink: Use dma_request_chan() directly for channel request spi: tegra114: Use dma_request_chan() directly for channel request spi: s3c64xx: Use dma_request_chan() directly for channel request spi: qup: Use dma_request_chan() directly for channel request spi: pl022: Use dma_request_chan() directly for channel request spi: imx: Use dma_request_chan() directly for channel request spi: fsl-lpspi: Use dma_request_chan() directly for channel request spi: atmel: Use dma_request_chan() directly for channel request spi: at91-usart: Use dma_request_chan() directly for channel request spi: fsl-cpm: Correct the free:ing spi: Fix regression to return zero on success instead of positive value spi: pxa2xx: Add missed security checks spi: nxp-fspi: Use devm API to fix missed unregistration of controller spi: omap2-mcspi: Remove redundant checks ...
2019-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds17-258/+1200
Pull networking updates from David Miller: "Another merge window, another pull full of stuff: 1) Support alternative names for network devices, from Jiri Pirko. 2) Introduce per-netns netdev notifiers, also from Jiri Pirko. 3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara Larsen. 4) Allow compiling out the TLS TOE code, from Jakub Kicinski. 5) Add several new tracepoints to the kTLS code, also from Jakub. 6) Support set channels ethtool callback in ena driver, from Sameeh Jubran. 7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED, SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long. 8) Add XDP support to mvneta driver, from Lorenzo Bianconi. 9) Lots of netfilter hw offload fixes, cleanups and enhancements, from Pablo Neira Ayuso. 10) PTP support for aquantia chips, from Egor Pomozov. 11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From Josh Hunt. 12) Add smart nagle to tipc, from Jon Maloy. 13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat Duvvuru. 14) Add a flow mask cache to OVS, from Tonghao Zhang. 15) Add XDP support to ice driver, from Maciej Fijalkowski. 16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak. 17) Support UDP GSO offload in atlantic driver, from Igor Russkikh. 18) Support it in stmmac driver too, from Jose Abreu. 19) Support TIPC encryption and auth, from Tuong Lien. 20) Introduce BPF trampolines, from Alexei Starovoitov. 21) Make page_pool API more numa friendly, from Saeed Mahameed. 22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni. 23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits) libbpf: Fix usage of u32 in userspace code mm: Implement no-MMU variant of vmalloc_user_node_flags slip: Fix use-after-free Read in slip_open net: dsa: sja1105: fix sja1105_parse_rgmii_delays() macvlan: schedule bc_work even if error enetc: add support Credit Based Shaper(CBS) for hardware offload net: phy: add helpers phy_(un)lock_mdio_bus mdio_bus: don't use managed reset-controller ax88179_178a: add ethtool_op_get_ts_info() mlxsw: spectrum_router: Fix use of uninitialized adjacency index mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels bpf: Simplify __bpf_arch_text_poke poke type handling bpf: Introduce BPF_TRACE_x helper for the tracing tests bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT bpf, testing: Add various tail call test cases bpf, x86: Emit patchable direct jump as tail call bpf: Constant map key tracking for prog array pokes bpf: Add poke dependency tracking for prog array maps bpf: Add initial poke descriptor table for jit images bpf: Move owner type, jited info into array auxiliary data ...
2019-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds47-2418/+14868
Pull crypto updates from Herbert Xu: "API: - Add library interfaces of certain crypto algorithms for WireGuard - Remove the obsolete ablkcipher and blkcipher interfaces - Move add_early_randomness() out of rng_mutex Algorithms: - Add blake2b shash algorithm - Add blake2s shash algorithm - Add curve25519 kpp algorithm - Implement 4 way interleave in arm64/gcm-ce - Implement ciphertext stealing in powerpc/spe-xts - Add Eric Biggers's scalar accelerated ChaCha code for ARM - Add accelerated 32r2 code from Zinc for MIPS - Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS Drivers: - Fix entropy reading failures in ks-sa - Add support for sam9x60 in atmel - Add crypto accelerator for amlogic GXL - Add sun8i-ce Crypto Engine - Add sun8i-ss cryptographic offloader - Add a host of algorithms to inside-secure - Add NPCM RNG driver - add HiSilicon HPRE accelerator - Add HiSilicon TRNG driver" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits) crypto: vmx - Avoid weird build failures crypto: lib/chacha20poly1305 - use chacha20_crypt() crypto: x86/chacha - only unregister algorithms if registered crypto: chacha_generic - remove unnecessary setkey() functions crypto: amlogic - enable working on big endian kernel crypto: sun8i-ce - enable working on big endian crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER hwrng: ks-sa - Enable COMPILE_TEST crypto: essiv - remove redundant null pointer check before kfree crypto: atmel-aes - Change data type for "lastc" buffer crypto: atmel-tdes - Set the IV after {en,de}crypt crypto: sun4i-ss - fix big endian issues crypto: sun4i-ss - hide the Invalid keylen message crypto: sun4i-ss - use crypto_ahash_digestsize crypto: sun4i-ss - remove dependency on not 64BIT crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver crypto: hisilicon - add DebugFS for HiSilicon SEC Documentation: add DebugFS doc for HiSilicon SEC crypto: hisilicon - add SRIOV for HiSilicon SEC ...
2019-11-25Merge tag 'livepatching-for-5.5' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - New API to track system state changes done be livepatch callbacks. It helps to maintain compatibility between livepatches. - Update Kconfig help text. ORC is another reliable unwinder. - Disable generic selftest timeout. Livepatch selftests have their own per-operation fine-grained timeouts. * tag 'livepatching-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: x86/stacktrace: update kconfig help text for reliable unwinders livepatch: Selftests of the API for tracking system state changes livepatch: Documentation of the new API for tracking system state changes livepatch: Allow to distinguish different version of system state changes livepatch: Basic API to track system state changes livepatch: Keep replaced patches until post_patch callback is called selftests/livepatch: Disable the timeout
2019-11-25Merge tag 'printk-for-5.5' of ↵Linus Torvalds25-90/+80
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...
2019-11-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds69-722/+1716
Pull KVM updates from Paolo Bonzini: "ARM: - data abort report and injection - steal time support - GICv4 performance improvements - vgic ITS emulation fixes - simplify FWB handling - enable halt polling counters - make the emulated timer PREEMPT_RT compliant s390: - small fixes and cleanups - selftest improvements - yield improvements PPC: - add capability to tell userspace whether we can single-step the guest - improve the allocation of XIVE virtual processor IDs - rewrite interrupt synthesis code to deliver interrupts in virtual mode when appropriate. - minor cleanups and improvements. x86: - XSAVES support for AMD - more accurate report of nested guest TSC to the nested hypervisor - retpoline optimizations - support for nested 5-level page tables - PMU virtualization optimizations, and improved support for nested PMU virtualization - correct latching of INITs for nested virtualization - IOAPIC optimization - TSX_CTRL virtualization for more TAA happiness - improved allocation and flushing of SEV ASIDs - many bugfixes and cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits) kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraints KVM: x86: Grab KVM's srcu lock when setting nested state KVM: x86: Open code shared_msr_update() in its only caller KVM: Fix jump label out_free_* in kvm_init() KVM: x86: Remove a spurious export of a static function KVM: x86: create mmu/ subdirectory KVM: nVMX: Remove unnecessary TLB flushes on L1<->L2 switches when L1 use apic-access-page KVM: x86: remove set but not used variable 'called' KVM: nVMX: Do not mark vmcs02->apic_access_page as dirty when unpinning KVM: vmx: use MSR_IA32_TSX_CTRL to hard-disable TSX on guest that lack it KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUID KVM: x86: do not modify masked bits of shared MSRs KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one KVM: nVMX: Assume TLB entries of L1 and L2 are tagged differently if L0 use EPT KVM: x86: Unexport kvm_vcpu_reload_apic_access_page() KVM: nVMX: add CR4_LA57 bit to nested CR4_FIXED1 KVM: nVMX: Use semi-colon instead of comma for exit-handlers initialization ...
2019-11-25Merge tag 'for-linus-5.5a-rc1-tag' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a small series to remove the build constraint of Xen x86 MCE handling to 64-bit only - a bunch of minor cleanups * tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix Kconfig indentation xen/mcelog: also allow building for 32-bit kernels xen/mcelog: add PPIN to record when available xen/mcelog: drop __MC_MSR_MCGCAP xen/gntdev: Use select for DMA_SHARED_BUFFER xen: mm: make xen_mm_init static xen: mm: include <xen/xen-ops.h> for missing declarations
2019-11-25Merge tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds226-3602/+5567
Pull MIPS updates from Paul Burton: "The main MIPS changes for 5.5: - Atomics-related code sees some rework & cleanup, most notably allowing Loongson LL/SC errata workarounds to be more bulletproof & their correctness to be checked at build time. - Command line setup code is simplified somewhat, resolving various corner cases. - MIPS kernels can now be built with kcov code coverage support. - We can now build with CONFIG_FORTIFY_SOURCE=y. - Miscellaneous cleanups. And some platform specific changes: - We now disable some broken TLB functionality on certain Ingenic systems, and JZ4780 systems gain some devicetree nodes to support more devices. - Loongson support sees a number of cleanups, and we gain initial support for Loongson 3A R4 systems. - We gain support for MediaTek MT7688-based GARDENA Smart Gateway systems. - SGI IP27 (Origin 2*) see a number of fixes, cleanups & simplifications. - SGI IP30 (Octane) systems are now supported" * tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits) MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module MIPS: PCI: Fix fake subdevice ID for IOC3 MIPS: Ingenic: Disable abandoned HPTLB function. MIPS: PCI: remember nasid changed by set interrupt affinity MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter mips: add support for folded p4d page tables mips: drop __pXd_offset() macros that duplicate pXd_index() ones mips: fix build when "48 bits virtual memory" is enabled MIPS: math-emu: Reuse name array in debugfs_fpuemu() MIPS: allow building with kcov coverage MIPS: Loongson64: Drop setup_pcimap MIPS: Loongson2ef: Convert to early_printk_8250 MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdline MIPS: Drop pmon.h MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage MIPS: Loongson: Rename LOONGSON1 to LOONGSON32 MIPS: Loongson: Fix return value of loongson_hwmon_init MIPS: add support for SGI Octane (IP30) MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common ...
2019-11-25Merge tag 'm68k-for-v5.5-tag1' of ↵Linus Torvalds14-74/+62
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Atari Falcon IDE platform driver conversion for module autoload - defconfig updates (including enablement of Amiga ICY I2C) - small fixes and cleanups * tag 'm68k-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/atari: Convert Falcon IDE drivers to platform drivers m68k: defconfig: Enable ICY I2C and LTC2990 on Amiga m68k: defconfig: Update defconfigs for v5.4-rc1 m68k: q40: Fix info-leak in rtc_ioctl nubus: Remove cast to void pointer
2019-11-25Merge branch 'ras-core-for-linus' of ↵Linus Torvalds5-44/+319
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Borislav Petkov: - Fully reworked thermal throttling notifications, there should be no more spamming of dmesg (Srinivas Pandruvada and Benjamin Berg) - More enablement for the Intel-compatible CPUs Zhaoxin (Tony W Wang-oc) - PPIN support for Icelake (Tony Luck) * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/therm_throt: Optimize notifications of thermal throttle x86/mce: Add Xeon Icelake to list of CPUs that support PPIN x86/mce: Lower throttling MCE messages' priority to warning x86/mce: Add Zhaoxin LMCE support x86/mce: Add Zhaoxin CMCI support x86/mce: Add Zhaoxin MCE support x86/mce/amd: Make disable_err_thresholding() static
2019-11-25Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds3-19/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode updates from Borislav Petkov: "This converts the late loading method to load the microcode in parallel (vs sequentially currently). The patch remained in linux-next for the maximum amount of time so that any potential and hard to debug fallout be minimized. Now cloud folks have their milliseconds back but all the normal people should use early loading anyway :-)" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/intel: Issue the revision updated message only on the BSP x86/microcode: Update late microcode in parallel x86/microcode/amd: Fix two -Wunused-but-set-variable warnings
2019-11-25Merge tag 's390-5.5-1' of ↵Linus Torvalds26-274/+276
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Adjust PMU device drivers registration to avoid WARN_ON and few other perf improvements. - Enhance tracing in vfio-ccw. - Few stack unwinder fixes and improvements, convert get_wchan custom stack unwinding to generic api usage. - Fixes for mm helpers issues uncovered with tests validating architecture page table helpers. - Fix noexec bit handling when hardware doesn't support it. - Fix memleak and unsigned value compared with zero bugs in crypto code. Minor code simplification. - Fix crash during kdump with kasan enabled kernel. - Switch bug and alternatives from asm to asm_inline to improve inlining decisions. - Use 'depends on cc-option' for MARCH and TUNE options in Kconfig, add z13s and z14 ZR1 to TUNE descriptions. - Minor head64.S simplification. - Fix physical to logical CPU map for SMT. - Several cleanups in qdio code. - Other minor cleanups and fixes all over the code. * tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/cpumf: Adjust registration of s390 PMU device drivers s390/smp: fix physical to logical CPU map for SMT s390/early: move access registers setup in C code s390/head64: remove unnecessary vdso_per_cpu_data setup s390/early: move control registers setup in C code s390/kasan: support memcpy_real with TRACE_IRQFLAGS s390/crypto: Fix unsigned variable compared with zero s390/pkey: use memdup_user() to simplify code s390/pkey: fix memory leak within _copy_apqns_from_user() s390/disassembler: don't hide instruction addresses s390/cpum_sf: Assign error value to err variable s390/cpum_sf: Replace function name in debug statements s390/cpum_sf: Use consistant debug print format for sampling s390/unwind: drop unnecessary code around calling ftrace_graph_ret_addr() s390: add error handling to perf_callchain_kernel s390: always inline current_stack_pointer() s390/mm: add mm_pxd_folded() checks to pxd_free() s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported s390/mm: simplify page table helpers for large entries s390/mm: make pmd/pud_bad() report large entries as bad ...
2019-11-25Merge tag 'arm64-upstream' of ↵Linus Torvalds57-704/+1219
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Apart from the arm64-specific bits (core arch and perf, new arm64 selftests), it touches the generic cow_user_page() (reviewed by Kirill) together with a macro for x86 to preserve the existing behaviour on this architecture. Summary: - On ARMv8 CPUs without hardware updates of the access flag, avoid failing cow_user_page() on PFN mappings if the pte is old. The patches introduce an arch_faults_on_old_pte() macro, defined as false on x86. When true, cow_user_page() makes the pte young before attempting __copy_from_user_inatomic(). - Covert the synchronous exception handling paths in arch/arm64/kernel/entry.S to C. - FTRACE_WITH_REGS support for arm64. - ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4 - Several kselftest cases specific to arm64, together with a MAINTAINERS update for these files (moved to the ARM64 PORT entry). - Workaround for a Neoverse-N1 erratum where the CPU may fetch stale instructions under certain conditions. - Workaround for Cortex-A57 and A72 errata where the CPU may speculatively execute an AT instruction and associate a VMID with the wrong guest page tables (corrupting the TLB). - Perf updates for arm64: additional PMU topologies on HiSilicon platforms, support for CCN-512 interconnect, AXI ID filtering in the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2. - GICv3 optimisation to avoid a heavy barrier when accessing the ICC_PMR_EL1 register. - ELF HWCAP documentation updates and clean-up. - SMC calling convention conduit code clean-up. - KASLR diagnostics printed during boot - NVIDIA Carmel CPU added to the KPTI whitelist - Some arm64 mm clean-ups: use generic free_initrd_mem(), remove stale macro, simplify calculation in __create_pgd_mapping(), typos. - Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for endinanness to help with allmodconfig" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits) arm64: Kconfig: add a choice for endianness kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous" arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry arm64: kaslr: Check command line before looking for a seed arm64: kaslr: Announce KASLR status on boot kselftest: arm64: fake_sigreturn_misaligned_sp kselftest: arm64: fake_sigreturn_bad_size kselftest: arm64: fake_sigreturn_duplicated_fpsimd kselftest: arm64: fake_sigreturn_missing_fpsimd kselftest: arm64: fake_sigreturn_bad_size_for_magic0 kselftest: arm64: fake_sigreturn_bad_magic kselftest: arm64: add helper get_current_context kselftest: arm64: extend test_init functionalities kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht] kselftest: arm64: mangle_pstate_invalid_daif_bits kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils kselftest: arm64: extend toplevel skeleton Makefile drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform arm64: mm: reserve CMA and crashkernel in ZONE_DMA32 ...
2019-11-25Merge tag 'linux-kselftest-5.5-rc1-kunit' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest KUnit support gtom Shuah Khan: "This adds KUnit, a lightweight unit testing and mocking framework for the Linux kernel from Brendan Higgins. KUnit is not an end-to-end testing framework. It is currently supported on UML and sub-systems can write unit tests and run them in UML env. KUnit documentation is included in this update. In addition, this Kunit update adds 3 new kunit tests: - proc sysctl test from Iurii Zaikin - the 'list' doubly linked list test from David Gow - ext4 tests for decoding extended timestamps from Iurii Zaikin In the future KUnit will be linked to Kselftest framework to provide a way to trigger KUnit tests from user-space" * tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits) lib/list-test: add a test for the 'list' doubly linked list ext4: add kunit test for decoding extended timestamps Documentation: kunit: Fix verification command kunit: Fix '--build_dir' option kunit: fix failure to build without printk MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec() MAINTAINERS: add entry for KUnit the unit testing framework Documentation: kunit: add documentation for KUnit kunit: defconfig: add defconfigs for building KUnit tests kunit: tool: add Python wrappers for running KUnit tests kunit: test: add tests for KUnit managed resources kunit: test: add the concept of assertions kunit: test: add tests for kunit test abort kunit: test: add support for test abort objtool: add kunit_try_catch_throw to the noreturn list kunit: test: add initial tests lib: enable building KUnit in lib/ kunit: test: add the concept of expectations kunit: test: add assertion printing library ...
2019-11-25um: Loadable BPF "Firmware" for vector driversAnton Ivanov4-30/+193
All vector drivers now allow a BPF program to be loaded and associated with the RX socket in the host kernel. 1. The program can be loaded as an extra kernel command line option to any of the vector drivers. 2. The program can also be loaded as "firmware", using the ethtool flash option. It is possible to turn this facility on or off using a command line option. A simplistic wrapper for generating the BPF firmware for the raw socket driver out of a tcpdump/libpcap filter expression can be found at: https://github.com/kot-begemot-uk/uml_vector_utilities/ Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-25um: Fix Kconfig indentationKrzysztof Kozlowski1-1/+1
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-25um: virtio_uml: Disallow modular buildJohannes Berg2-3/+3
This driver *can* be a module, but then its parameters (socket path) are untrusted data from inside the VM, and that isn't allowed. Allow the code to only be built-in to avoid that. Fixes: 5d38f324993f ("um: drivers: Add virtio vhost-user driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-25um: virtio: Keep reading on -EAGAINJohannes Berg1-4/+4
When we get an interrupt from the socket getting readable, and start reading, there's a possibility for a race. This depends on the implementation of the device, but e.g. with qemu's libvhost-user, we can see: device virtio_uml --------------------------------------- write header get interrupt read header read body -> returns -EAGAIN write body The -EAGAIN return is because the socket is non-blocking, and then this leads us to abandon this message. In fact, we've already read the header, so when the get another signal/interrupt for the body, we again read it as though it's a new message header, and also abandon it for the same reason (wrong size etc.) This essentially breaks things, and if that message was one that required a response, it leads to a deadlock as the device is waiting for the response but we'll never reply. Fix this by spinning on -EAGAIN as well when we read the message body. We need to handle -EAGAIN as "no message" while reading the header, since we share an interrupt. Note that this situation is highly unlikely to occur in normal usage, since there will be very few messages and only in the startup phase. With the inband call feature this does tend to happen (eventually) though. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-25um: virtio: Remove device on disconnectJohannes Berg1-19/+45
If the connection drops, just remove the device, we don't try to recover from this right now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-25um: Don't trace irqflags during shutdownJohannes Berg1-1/+1
In the main() code, we eventually enable signals just before exec() or exit(), in order to to not have signals pending and delivered *after* the exec(). I've observed SIGSEGV loops at this point, and the reason seems to be the irqflags tracing; this makes sense as the kernel is no longer really functional at this point. Since there's really no reason to use unblock_signals_trace() here (I had just done a global search & replace), use the plain unblock_signals() in this case to avoid going into the no longer functional kernel. Fixes: 0dafcbe128d2 ("um: Implement TRACE_IRQFLAGS_SUPPORT") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-25y2038: ipc: fix x32 ABI breakageArnd Bergmann1-2/+2
The correct type on x32 is 64-bit wide, same as for the other struct members around it, so use __kernel_long_t in place of the original __kernel_time_t here, corresponding to the rest of the structure. Fixes: caf5e32d4ea7 ("y2038: ipc: remove __kernel_time_t reference from headers") Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-11-25arm64: dts: juno: Fix UART frequencyAndre Przywara1-2/+2
Older versions of the Juno *SoC* TRM [1] recommended that the UART clock source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more correct value of 7.3728 MHz. Somehow the wrong value managed to end up in our DT. Doing a prime factorisation, a modulo divide by 115200 and trying to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest that the old value was actually a typo. The actual UART clock is driven by a PLL, configured via a parameter in some board.txt file in the firmware, which reads 7.37 MHz (sic!). Fix this to correct the baud rate divisor calculation on the Juno board. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0515b.b/DDI0515B_b_juno_arm_development_platform_soc_trm.pdf [2] http://infocenter.arm.com/help/topic/com.arm.doc.100113_0000_07_en/arm_versatile_express_juno_development_platform_(v2m_juno)_technical_reference_manual_100113_0000_07_en.pdf Fixes: 71f867ec130e ("arm64: Add Juno board device tree.") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Powered by cgit, Gruvboxed by Blaster4385.