aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-06-15powerpc/kexec: Wait for online/possible CPUs only.Matt Evans1-17/+1
kexec_perpare_cpus_wait() iterates i through NR_CPUS to check paca[i].kexec_state of each to make sure they have quiesced. However now we have dynamic PACA allocation, paca[NR_CPUS] is not necessarily valid and we overrun the array; spurious "cpu is not possible, ignoring" errors result. This patch iterates for_each_online_cpu so stays within the bounds of paca[] -- and every CPU is now 'possible'. Signed-off-by: Matt Evans <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2010-06-15powerpc: Disable CONFIG_SYSFS_DEPRECATEDGrant Likely60-119/+59
Acked-by: Grant Likely <[email protected]> On 5 May 2010 21:33, "Anton Blanchard" <[email protected]> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: Anton Blanchard <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2010-06-15powerpc/boot: Remove addRamdisk.c since it is now unusedPaul Mackerras2-312/+1
It was used in the dim distant past for adding initrds to images for legacy iSeries, but it's not even used for that now that we have initramfs. So remove it. Signed-off-by: Paul Mackerras <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2010-06-15powerpc: Move kdump default base address to 64MB on 64bitAnton Blanchard1-1/+10
We are seeing boot fails on some System p machines when using the kdump crashkernel= boot option. The default kdump base address is 32MB, so if we reserve 256MB for kdump then we reserve all of the RMO except the first 32MB. We really want kdump to reserve some memory in the RMO and most of it elsewhere but that will require more significant changes. For now we can shift the default base address to 64MB when CONFIG_PPC64 and CONFIG_RELOCATABLE are set. This isn't quite correct since what we really care about is the kdump kernel is relocatable, but we already make the assumption that base kernel and kdump kernel have the same CONFIG_RELOCATABLE setting, eg: #ifndef CONFIG_RELOCATABLE if (crashk_res.start != KDUMP_KERNELBASE) printk("Crash kernel location must be 0x%x\n", KDUMP_KERNELBASE); ... RTAS is instantiated towards the top of our RMO, so if we were to go any higher we risk not having enough RMO memory for the kdump kernel on boxes with a 128MB RMO. Signed-off-by: Anton Blanchard <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2010-06-15powerpc: Remove dead CONFIG_HIGHPTEChristoph Egger1-4/+0
CONFIG_HIGHPTE doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2010-06-14[ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXAJonathan Cameron1-1/+2
PMU is not tested and enabled on MMP architecture at this moment, the device IRQ number, IRQ_PMU depends on ARCH_PXA. Build PMU only for ARCH_PXA. Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Eric Miao <[email protected]>
2010-06-13[ARM] pxa/mioa701: fix camera regressionRobert Jarzmik1-1/+1
Since commit a48c24a696f0d93c49f913b7818e9819612b1f4e, the camera is not working anymore. After the v4l2 migration, the mt9m111 camera board information was not passed to the i2c layer anymore, but stored for future use of v4l2 (through soc_camera). Because mioa701_i2c_devices[] was tagged as "__initdata", and because after the v4l2 migration, the new structure "iclink" references it, the mt9m111 driver is not probed anymore, as part of "iclink" is not valid (discarded after kernel init). Although there is not compilation error, nor runtime oops, this patch restores a working camera on the mioa701 board. Signed-off-by: Robert Jarzmik <[email protected]> Acked-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Eric Miao <[email protected]>
2010-06-13[ARM] pxa/z2: fix flash layout to final versionMarek Vasut1-16/+10
This patch fixes flash layout to it's final version. Also, I fixed the authorship information of this file as it's been totally reworked since Ken released his last version. Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Eric Miao <[email protected]>
2010-06-13[ARM] pxa: fix incorrect gpio type in udc_pxa2xx.hSteve Bennett1-2/+2
gpio must be int, not u16, otherwise -1 isn't recognised by gpio_is_valid(). Signed-off-by: Steve Bennett <[email protected]> Signed-off-by: Eric Miao <[email protected]>
2010-06-12Merge branch 'bugzilla-13931-sleep-nvs' into releaseLen Brown1-1/+1
Conflicts: drivers/acpi/sleep.c Signed-off-by: Len Brown <[email protected]>
2010-06-11Merge branch 'pm-fixes' of ↵Linus Torvalds3-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / x86: Save/restore MISC_ENABLE register
2010-06-11Merge branch 'for-linus' of ↵Linus Torvalds4-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11x86, pat: Proper init of memtype subtree_max_endVenkatesh Pallipadi2-1/+2
subtree_max_end that was recently added to struct memtype was not getting properly initialized resulting in WARNING: kmemcheck: Caught 64-bit read from uninitialized memory in memtype_rb_augment_cb() reported here https://bugzilla.kernel.org/show_bug.cgi?id=16092 This change fixes the problem. Reported-by: Christian Casteyde <[email protected]> Tested-by: Christian Casteyde <[email protected]> Signed-off-by: Venkatesh Pallipadi <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]> Cc: Suresh Siddha <[email protected]>
2010-06-11PCI: clear bridge resource range if BIOS assigned bad oneYinghai Lu4-0/+5
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: Yannick <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Signed-off-by: Yinghai Lu <[email protected]> Signed-off-by: Jesse Barnes <[email protected]>
2010-06-10um, hweight: Fix UML boot crash due to x86 optimized hweightBorislav Petkov1-0/+6
Apparently UML cannot stomach callee reg-saving trickery introduced with d61931d89be506372d01a90d1755f6d0a9fafe2d (x86: Add optimized popcnt variants) and oopses during boot: http://marc.info/?l=linux-kernel&m=127522065202435&w=2 Redirect arch_hweight.h include from the x86 portion to the generic arch_hweight.h which is a fallback to the software hweight routines. LKML-Reference: <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
2010-06-10x86, setup: Set ax register in boot vga queryAndi Kleen1-2/+1
Catch missing conversion to the register structure "glove box" scheme. Found by gcc 4.6's new warnings. Signed-off-by: Andi Kleen <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
2010-06-11percpu, x86: Avoid warnings of unused variables in per cpuAndi Kleen1-0/+2
Avoid hundreds of warnings with a gcc 4.6 -Wall build. Signed-off-by: Andi Kleen <[email protected]> Acked-by: Tejun Heo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2010-06-10Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-2/+103
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: read apic->irr with ioapic lock held KVM: ia64: Add missing spin_unlock in kvm_arch_hardware_enable() KVM: Fix order passed to iommu_unmap KVM: MMU: Remove user access when allowing kernel access to gpte.w=0 page KVM: MMU: invalidate and flush on spte small->large page size change KVM: SVM: Implement workaround for Erratum 383 KVM: SVM: Handle MCEs early in the vmexit process KVM: powerpc: fix init/exit annotation
2010-06-10Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix null pointer deref with SEND_SIG_FORCED perf: Fix signed comparison in perf_adjust_period() powerpc/oprofile: fix potential buffer overrun in op_model_cell.c perf symbols: Set the DSO long name when using symbol_conf.vmlinux_name
2010-06-10suspend: Move NVS save/restore code to generic suspend functionalityMatthew Garrett1-1/+1
Saving platform non-volatile state may be required for suspend to RAM as well as hibernation. Move it to more generic code. Signed-off-by: Matthew Garrett <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Tested-by: Maxim Levitsky <[email protected]> Signed-off-by: Len Brown <[email protected]>
2010-06-10Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds19-30/+206
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6164/1: Add kto and kfrom to input operands list. ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6 ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debugging ARM: 6152/1: ux500 make it possible to disable localtimers [ARM] pxa/spitz: Correctly register WM8750 [ARM] pxa/palmtc: storage class should be before const qualifier ARM: 6146/1: sa1111: Prevent deadlock in resume path ARM: 6145/1: ux500 MTU clockrate correction ARM: 6144/1: TCM memory bug freeing bug ARM: VFP: Fix vfp_put_double() for d16-d31
2010-06-10OMAP3: PM: fix IO daisy chain enable to use PM_WKEN regKevin Hilman1-2/+2
Checking to se if the IO daisy chain is enabled should be checking the PM_WKEN register, not the PM_WKST register. Reading PM_WKST tells us if an event occurred, not whether or not it is enabled. Apparently, we've been lucky until now in that a pending event has not been there during enable. However, on 3630/Zoom3, I noticed because of the WARN that this timeout was always happening. Signed-off-by: Kevin Hilman <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2010-06-10omap: GPIO: fix auto-disable of debounce clockKevin Hilman1-0/+1
The addition of the new debounce code (commit 168ef3d9a56bd8bffe0ef4189c450888b4aefefe) broke the auto-disable of debounce clocks on idle by forgetting to update the debounce clock enable mask. Add back the updating of bank->dbck_enable_mask so debounce clocks are auto-disabled. Signed-off-by: Kevin Hilman <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2010-06-10omap: DMTIMER: Ack pending interrupt always when stopping a timerTero Kristo1-3/+3
The kernel timer queue is being run currently from a GP timer running in a one shot mode, which works in a way that when it expires, it will also stop. Usually during this situation, the interrupt handler will ack the interrupt, load a new value to the timer and start it again. During suspend, the situation is slightly different, as we disable interrupts just before timekeeping is suspended, which leaves a small window where the timer can expire before it is stopped, and will leave the interrupt flag pending. This pending interrupt will prevent ARM sleep entry, thus now we ack it always when we are attempting to stop a timer. Signed-off-by: Tero Kristo <[email protected]> Acked-by: Kevin Hilman <[email protected]> [[email protected]: removed the ifdef to make the patch cover omap1 also] Signed-off-by: Tony Lindgren <[email protected]>
2010-06-10perf_events: Fix Intel Westmere event constraintsStephane Eranian1-0/+1
Based on Intel Vol3b (March 2010), the event SNOOPQ_REQUEST_OUTSTANDING is restricted to counters 0,1 so update the event table for Intel Westmere accordingly. Signed-off-by: Stephane Eranian <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # .34.x LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2010-06-10ARM: reduce defconfigsUwe Kleine-König177-194157/+652
Signed-off-by: Uwe Kleine-König <[email protected]>
2010-06-09x86, irq: Rename gsi_end gsi_top, and fix off by one errorsEric W. Biederman5-14/+14
When I introduced the global variable gsi_end I thought gsi_end on io_apics was one past the end of the gsi range for the io_apic. After it was pointed out the the range on io_apics was inclusive I changed my global variable to match. That was a big mistake. Inclusive semantics without a range start cannot describe the case when no gsi's are allocated. Describing the case where no gsi's are allocated is important in sfi.c and mpparse.c so that we can assign gsi numbers instead of blindly copying the gsi assignments the BIOS has done as we do in the acpi case. To keep from getting the global variable confused with the gsi range end rename it gsi_top. To allow describing the case where no gsi's are allocated have gsi_top be one place the highest gsi number seen in the system. This fixes an off by one bug in sfi.c: Reported-by: jacob pan <[email protected]> This fixes the same off by one bug in mpparse.c: This fixes an off unreachable by one bug in acpi/boot.c:irq_to_gsi Reported-by: Yinghai <[email protected]> Signed-off-by: Eric W. Biederman <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
2010-06-09FRV: Reinstate null behaviour for the GDB remote protocol 'p' commandDavid Howells1-0/+6
Reinstate the null behaviour that the in-kernel gdbstub had for the GDB remote protocol 'p' command (retrieve a single register value) prior to commit 7ca8b9c0dafd ("frv: extend gdbstub to support more features of gdb"). Before that, the 'p' command just returned an empty reply, which causes gdb to then go and use the 'g' command. However, since that commit, the 'p' command returns an error string, which causes gdb to abort its connection to the target. Not all gdb versions are affected, some use try 'g' first, and if that works, don't bother with 'p', and so don't see the error. Signed-off-by: David Howells <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-06-09Merge branch 'msm-urgent' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds1-0/+1
* 'msm-urgent' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: mmc: msm: fix compile error on MSM7x30 msm: dma: add completion.h header
2010-06-09KVM: ia64: Add missing spin_unlock in kvm_arch_hardware_enable()Julia Lawall1-0/+1
Add a spin_unlock missing on the error path. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1; @@ * spin_lock(E1,...); <+... when != E1 if (...) { ... when != E1 * return ...; } ...+> * spin_unlock(E1,...); // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2010-06-09KVM: MMU: Remove user access when allowing kernel access to gpte.w=0 pageAvi Kivity1-0/+3
If cr0.wp=0, we have to allow the guest kernel access to a page with pte.w=0. We do that by setting spte.w=1, since the host cr0.wp must remain set so the host can write protect pages. Once we allow write access, we must remove user access otherwise we mistakenly allow the user to write the page. Reviewed-by: Xiao Guangrong <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2010-06-09KVM: MMU: invalidate and flush on spte small->large page size changeMarcelo Tosatti1-0/+2
Always invalidate spte and flush TLBs when changing page size, to make sure different sized translations for the same address are never cached in a CPU's TLB. Currently the only case where this occurs is when a non-leaf spte pointer is overwritten by a leaf, large spte entry. This can happen after dirty logging is disabled on a memslot, for example. Noticed by Andrea. KVM-Stable-Tag Signed-off-by: Marcelo Tosatti <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2010-06-09KVM: SVM: Implement workaround for Erratum 383Joerg Roedel2-0/+82
This patch implements a workaround for AMD erratum 383 into KVM. Without this erratum fix it is possible for a guest to kill the host machine. This patch implements the suggested workaround for hypervisors which will be published by the next revision guide update. [jan: fix overflow warning on i386] [xiao: fix unused variable warning] Cc: [email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Jan Kiszka <[email protected]> Signed-off-by: Xiao Guangrong <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2010-06-09KVM: SVM: Handle MCEs early in the vmexit processJoerg Roedel1-1/+14
This patch moves handling of the MC vmexits to an earlier point in the vmexit. The handle_exit function is too late because the vcpu might alreadry have changed its physical cpu. Cc: [email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2010-06-09KVM: powerpc: fix init/exit annotationJean Delvare1-1/+1
kvmppc_e500_exit() is a module_exit function, so it should be tagged with __exit, not __init. The incorrect annotation was added by commit 2986b8c72c272ea58edd37903b042c6da985627d. Signed-off-by: Jean Delvare <[email protected]> Cc: [email protected] Signed-off-by: Alexander Graf <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2010-06-09microblaze: Fix sg_dma_len() regressionFUJITA Tomonori1-1/+0
The commit "asm-generic: add NEED_SG_DMA_LENGTH to define sg_dma_len()" 18e98307de0d746cb0845ebf66535ce2184c25a2 broke microblaze compilation. dma_direct_map_sg() sets sg->dma_length, however microblaze doesn't set NEED_SG_DMA_LENGTH so scatterlist strcutres doesn't include dma_length. sg->dma_length is always equal to sg->length on microblaze. So we don't need to set set dma_length, that is, microblaze can simply use sg->length. Signed-off-by: FUJITA Tomonori <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2010-06-09microblaze: Define ARCH_SLAB_MINALIGN to fix slab crashMichal Simek1-0/+2
The commit "mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slab_def.h>" 1f0ce8b3dd667dca7 which moved the ARCH_SLAB_MINALIGN default into the global header broke FLAT for Microblaze. Error message: slab error in verify_redzone_free(): cache `idr_layer_cache': memory outside object was overwritten Signed-off-by: Michal Simek <[email protected]>
2010-06-09omap: Stalker board: switch over to gpio_set_debounceSantosh Shilimkar1-3/+1
Commit 48feb337475a arm: omap: switch over to gpio_set_debounce caused "undefined reference to omap_set_gpio_debounce" build error. The fix is to use the generic gpiolib function. Cc: Felipe Balbi <[email protected]> Cc: Kevin Hilman <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2010-06-09omap: fix build failure due to missing include dma-mapping.hAmit Kucheria1-0/+2
Fixes following error, CC arch/arm/mach-omap2/usb-ehci.o arch/arm/mach-omap2/usb-ehci.c:263: error: implicit declaration of function 'DMA_BIT_MASK' arch/arm/mach-omap2/usb-ehci.c:263: error: initializer element is not constant make[1]: *** [arch/arm/mach-omap2/usb-ehci.o] Error 1 Signed-off-by: Amit Kucheria <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2010-06-09omap iommu: Fix Memory leakSatish1-1/+3
The memory allocated for sgt structure is not freed on error when sg_alloc_table is called in sgtable_alloc(). Signed-off-by: Satish Kumar <[email protected]> Signed-off-by: Manjunatha GK <[email protected]> Cc: Vimal Singh <[email protected]> Signed-off-by: Hiroshi DOYU <[email protected]> Signed-off-by: Tony Lindgen <[email protected]>
2010-06-08ARM: 6164/1: Add kto and kfrom to input operands list.Khem Raj4-8/+8
When functions incoming parameters are not in input operands list gcc 4.5 does not load the parameters into registers before calling this function but the inline assembly assumes valid addresses inside this function. This breaks the code because r0 and r1 are invalid when execution enters v4wb_copy_user_page () Also the constant needs to be used as third input operand so account for that as well. Tested on qemu arm. CC: <[email protected]> Signed-off-by: Khem Raj <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-06-08Merge branch 'fix' of ↵Russell King145-1222/+2515
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-06-08ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6Anfei1-0/+3
Instruction faults on pre-ARMv6 CPUs are interpreted as a 'translation fault', but do_translation_fault doesn't handle well if user mode trying to run instruction above TASK_SIZE, and result in the infinite retry of that instruction. CC: <[email protected]> Signed-off-by: Anfei Zhou <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-06-08ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debuggingNicolas Pitre1-1/+10
When CONFIG_DEBUG_HIGHMEM is used, the fixmap entry used for a highmem page by kmap_atomic() is always cleared by kunmap_atomic(). This helps find bad usages such as dereferences after the unmap, or overflow into the adjacent fixmap areas. But this debugging aid is completely bypassed when a kmap for the same page already exists as the kmap is reused instead. ON VIVT systems we have no choice but to reuse that kmap due to cache coherency issues, but on non VIVT systems we should always force the fixmap usage when debugging is active. Signed-off-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-06-08ARM: 6152/1: ux500 make it possible to disable localtimersLinus Walleij1-1/+2
Currently compilation of ux500 fails if you deselect the kernel feature for localtimers. Acked-by: Srinidhi Kasagar <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-06-08[S390] Update default configuration.Martin Schwidefsky1-10/+13
Signed-off-by: Martin Schwidefsky <[email protected]>
2010-06-08[S390] arch/s390/kvm: Use GFP_ATOMIC when a lock is heldJulia Lawall1-1/+1
The containing function is called from several places. At one of them, in the function __sigp_stop, the spin lock &fi->lock is held. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @gfp exists@ identifier fn; position p; @@ fn(...) { ... when != spin_unlock when any GFP_KERNEL@p ... when any } @locked@ identifier gfp.fn; @@ spin_lock(...) ... when != spin_unlock fn(...) @depends on locked@ position gfp.p; @@ - GFP_KERNEL@p + GFP_ATOMIC // </smpl> Signed-off-by: Julia Lawall <[email protected]> Acked-by: Christian Borntraeger <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2010-06-08[S390] kprobes: add parameter check to module_free()Hendrik Brueckner1-2/+4
When unregistering kprobes, kprobes calls module_free() and always passes NULL for the mod parameter. Add a check to prevent NULL pointer dereferences. See commit 740a8de0796dd12890b3c8ddcfabfcb528b78d40 for more details. Signed-off-by: Hendrik Brueckner <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2010-06-08[S390] appldata/extmem/kvm: add missing GFP_KERNEL flagHeiko Carstens3-11/+12
Add missing GFP flag to memory allocations. The part in cio only changes a comment. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2010-06-07x86: use __ASSEMBLY__ rather than __ASSEMBLER__Andres Salomon1-1/+1
As Ingo pointed out in a separate patch, we should be using __ASSEMBLY__. Make that the case in pgtable headers. Signed-off-by: Andres Salomon <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.